On the Stankoff.RU website you can buy hydraulic cold presses from leading manufacturers. There are more than 8 models of cold pressing presses in stock and on order at the best prices. Only profitable offers with detailed descriptions and photos. Check prices with managers.
The traditional cold pressing technique is widely used in carpentry and furniture manufacturing plants. Surface cladding and joining of wood elements without the use of thermal effects is a simple and economical technology. Cold presses provide a high-quality result of gluing the package and differ from hot installations in low operating costs.
The machines are designed to perform technological operations for the manufacture, assembly and processing of flat surfaces using the method of double-sided cladding. The devices allow the use of natural and synthetic finishing materials in the form of veneer, polymer film, paper and plastic. Cold pressing presses are used to create:
Compared to hot types of equipment, the cold method has the advantage of being able to use workpieces with large volumes that cannot be heated to a given depth during processing. The absence of heating elements significantly reduces the amount of energy consumed, and a constant level of operating temperature extends the service life of the mechanisms.
The steel structures of their durable beams and massive slabs are distinguished by the high reliability of their working units. The stable bed dampens vibration well and eliminates material displacement during processing. Equipment is classified by type based on:
A hydraulic cold press uses a set of plates consisting of a rigidly fixed module and moving parts that exert pressure on the workpiece with a force of 15 to 20 tons. The effectiveness of the combined action of the main mechanisms allows us to guarantee a high-quality processing result:
Precise adjustment of the working pressure is carried out in accordance with the dimensions of the parts being processed, the characteristics of the material and the type of adhesive composition used. Parameters are adjusted from the control panel according to the readings of the pressure gauge and timer.
The flat plate press is used for cladding flat parts and panels made from solid wood, plywood, MDF, chipboard, fiberboard and blockboard. Veneer, paper, film or plastic can be used as facing material. Typically, furniture or woodworking industries are equipped with such equipment.
There are several types of flat plate presses. If there is a need to glue slab material of large thickness, then cold presses will be the best equipment for performing such work. Press weims are usually used for the production of laminated veneer lumber and gluing of frame structures. This type of equipment can be pneumatic, mechanical or hydraulic.
Bending machines are designed for the production of bent-glued parts. To create such blanks, matrices of the desired shape are used. The veneering of various relief parts in furniture production occurs on membrane presses.
Hydraulic flat plate presses are typically used to line flat workpieces with veneer or plastic. The most reliable equipment is considered to be one in which heating occurs due to thermal oil. Electric heating elements can also be used for heating. Models using this technology are more convenient to use, but if they break down, they require complex, expensive repairs.
The NEVASTANKOMASH company is the largest supplier of woodworking equipment in St. Petersburg. We offer the most reliable, wear-resistant and easy-to-use flat plate presses from the world's best manufacturers.
Depending on the model, the machine can be equipped with plates with square pipes. Aluminum sheet is usually used to cover the slab. NEVASTANKOMASH LLC offers presses with flat plates with drilled holes. You can also purchase presses with flat plates with electric heating elements from us.
NEVASTANKOMASH offers flat plate presses at the most affordable prices in the North-West region. We cooperate directly with manufacturers, so we can offer favorable conditions for the purchase of original equipment.
Buy flat plate presses from NEVASTANKOMASH to ensure a guaranteed increase in the efficiency of your enterprise’s production lines.
PL can be supplied with different types of plates according to production needs and with different types of heating in order to provide the best processing results according to the customer's wishes. Press PL (water or oil) complete with pump, heating, expansion tank and piping system. Series: automatic pressure recovery, spare cable and automatic opening via timer.
Types of slabs:
Model PL presses can have different types of plates: prefabricated plates with a coil, Milled prefabricated steel plates, Solid drilled steel plates, Elkom electric plates.
Prefabricated slabs with a coil: coolant circulates inside. Very light, coated with aluminum foil. Completely designed, manufactured and tested at OMC.
Even within this type of slab there is a coil, but, unlike the slabs described above, they have a more reliable structure and, in addition, the working surfaces are crushed. Will be covered with aluminum foil. Completely designed, manufactured and tested at OMC.
This type of floor is formed by a steel plate (30 mm), inside which there is a circuit in which the coolant circulates. It is most suitable for high pressure. Typically this type of board is covered with mylar or aluminum. Completely designed, manufactured and tested at OMC.
This type of stove heats up due to the presence of electrical resistance within it. The presses on which Elkom plates are installed do not have a heating system. Plans made in Germany.
Elkom electric stoves: heating due to internal resistance. Maximum temperature around 120°C.
LOGIC CONTROL version
New FULL TOUCH SCREEN panel with automatic calculation of pressure and heating control.
OMC Hydraulic Hot Press (Italy) designed for cladding flat parts made of chipboard, MDF, fibreboard, plywood, solid wood panels with various facing materials (veneer, film, paper) at max. operating temperature 120 °C.
The Ducon company offers the sale of hydraulic presses for cold and hot cladding of wood parts. With the help of equipment from our suppliers, you will achieve high results in your work and establish uninterrupted production of products of the declared quality. We offer OMC presses of various modifications. Upon request, our specialists will select the necessary equipment and tools for it.
We work with the best equipment suppliers and offer you two main types of hydraulic presses for crimping various workpieces and parts with veneer: hot pressing presses for veneering flat parts and wood products; cold pressing presses for embossing parts.
Our equipment can be used in factories for the production of wooden doors, as well as in furniture production. The hot stamping press will allow you to bring to life design solutions for textured wood finishing of any products, right down to accessories for room renovation.
The affordable price of hydraulic presses and their sale, including via the Internet, makes the products of our suppliers available to all consumers. You can order a press for the production of doors with delivery to any region, and we will cope with this task.
1. We work without intermediaries. This gives you the opportunity to buy a hydraulic press at its real cost without overpayments.
2. We handle logistics ourselves. You can contact us regarding the purchase of any equipment in the required quantities. Even if a hot or cold press is not in stock, we will promptly order and deliver it to your warehouse.
3. We can tell you about any equipment and give advice on choosing. Contact our engineers to get a comparative analysis of hydraulic thermoforming presses from different manufacturers and buy the best one.
4. We support manufacturer's warranties. Own service centers throughout Russia are the key to successful and long-term operation of all equipment.
If your production needs hydraulic presses, we will be happy to promptly fulfill your request. Prices for hot presses are available on request. The final cost depends on the choice of model, its availability in the warehouse and the cost of delivery to your region.
