If the house has damp cold walls and mold has appeared on them, smudges in the corners on the wallpaper and walls, drafts are walking, the walls are freezing and heat is lost - it's time to insulate the house!
In order to avoid difficulties with recalculations, our company made a decision and “frozen” the prices for the services provided, and for May 2016 the prices remained the same as they were in 2017.
Repair price and
sealing of interpanel seams
Depends on the type of house and features of the building, on average, is
450 rub .
for the m. with all costs incl. material, work, coordination. We do not provide any additional costs for the customer and an increase in the cost! The minimum scope of work is not less than 30 meters.
The number of storeys does not affect the cost of work.
Sealing of interpanel seams is carried out along the perimeter of the panel (top, bottom and side seams of the panel). For the last floor, another technical floor is added (since through the voids in the joints technical floor water flows into the interpanel seams of your apartment). For block buildings, the amount of work is about 30% more.
If you know the type of house, then on the calculator, if you select the proposed parameters, you can accurately calculate the amount of work:
What technologies are used for insulation of interpanel joints?
We use only high-quality materials and technologies to restore the tightness of joints with high weather resistance, water and air tightness. This allows you to achieve excellent results, even when performing work at sub-zero temperatures.
Mastic color for all types of panel buildings, in most cases - white. We use it.
The main thing is not the chosen technology for sealing the seams, but the quality of materials and the experience of specialists.
IN winter time the forefront is the preservation of heat in apartments, offices and industrial premises. And the first solution that suggests itself is the sealing of interpanel seams in prefabricated houses, all kinds of joints of facade elements, the elimination of drafts and the elimination of leaks. How by-effect of the above malfunctions of the facades of buildings, roofs, walls, mold, fungus may appear, which is a direct threat to the building itself and the health of the person in it. The reasons for increased heat loss, increased humidity in the room can be very diverse, but there are some of the most common generalizations.
Also, there are often mistakes made during the construction process. It should be added that these elements not only worsen the microclimate in the room, but can also become a source of rapid deterioration of the building due to the accumulation of dirt, moisture and other things in them. There is only one solution - sealing interpanel seams. This procedure may consist of several stages, be primary or secondary (this affects the range of work performed), and so on. In each case, an individual program is selected to solve problems with the isolation of the object.
However, you shouldn't worry about this. If you notice the source of heat loss in time and eliminate it, then your house will again be warm and cozy. It will also serve you for decades. Professional sealing of interpanel seams in Moscow is best opportunity prepare your home for the winter frosts.
Competently performed work reduces several times heat loss, prevents the accumulation of moisture, which can lead to the destruction of structures, the formation of mold and mildew. Our company, whose main specialization is industrial mountaineering in Moscow, is ready to offer you services for finishing seams and joints of panels, walls, roofs and other components of a residential building. We not only isolate weak areas of the structure, but also eliminate possible leaks. Thanks to an integrated approach, even the most non-standard issues are solved. If you are interested in high quality, coupled with affordable price for sealing interpanel seams, then "Alpinists" will help you.
After drying, the insulating materials will fill the entire available free area, creating a powerful protection. This will not only prevent moisture from getting inside, but also significantly reduce the heat loss of a residential facility. If you are interested in the cost of sealing interpanel seams, then it depends on the amount of work and the materials used. You can specify the approximate amount from the employees of the company "Alpinists" by phone or in the office.
Name of works | Unit | Cost of work in the private sector | The cost of large volume work |
Complex sealing of the interpanel seam | linear m. | From 1200 rub. | From 150 rub. |
Comprehensive sealing of adjoining windows to walls | linear m. | From 870 rub. | From 140 rub. |
Opening old sealant | linear m. | From 150 rub. | From 55 rub. |
Opening of cement mortar | linear m. | From 120 rub. | From 45 rub. |
Surface degreasing | linear m. | From 350 rub. | From 75 rub. |
Mold and fungus removal | linear m. | From 540 rub. | From 60 rub. |
Insulation laying | sq. m. | From 160 rub. | From 25 rub. |
Installing a hydraulic lock | linear m. | From 900 rub. | From 340 rub. |
Application of sealant | linear m. | From 210 rub. | From 40 rub. |
Prices are valid for 2017-2018
Houses with a large number of apartments are a huge part of the total housing stock. Many of them are made according to panel technology. A similar construction option helped to provide at one time everyone who needed apartments with living space.
But buildings of this type have disadvantages that it is desirable to eliminate. One of the shortcomings in the construction of panel high-rise buildings is poor-quality sealing of seams in a panel house between its constituent parts- panels.
Sealing seams in a panel house is very important, because when the apartment is completely sealed, electricity consumption decreases, the microclimate in the home improves, mold and other similar troubles cease to bother the owner. To seal the seams in a panel and other house, it is worth using modern technologies. They will ensure reliability during further operation.
When erecting new buildings, sealing joints was far from being in the first place. The priority was usually the speed of construction. For sealing, simple tow or glass wool was often used, sometimes builders used rubber sealing materials. Connection after installation of the material, sealed cement mortar, then he was simply tarnished.
In the first few years, any house will shrink, albeit a small one. With a minimal shift of the panel parts relative to one another, a crack can be created in the joint that has been sealed until then, which will make the structure accessible to the penetration of cold and rain. A simple option for sealing the interpanel joint is in the same way as the builders.
This type of sealing of interpanel seams, according to the proposed technology, is the simplest and does not require large financial investments. But there is no guarantee that the structure will not move another millimeter and that the crack will not form again.
Therefore, it is worth familiarizing yourself with other sealing options, and choosing the most suitable for yourself. It is imperative to seal the seams in a panel house, because the normal condition of the premises depends on it.
How to repair seams:
It is impossible to seal the apartment from the inside, no matter how well the work is done. The main work should be carried out from the street.
If work is underway to insulate the apartment, seal the seams, it is worth doing work in the apartment itself, this will not be superfluous. The joints that will be opened are filled with insulating elements, after which they are filled with a solution. There will be only a slightly noticeable positive effect from such events, and there is no 100% guarantee that the apartment is reliably insulated.
The situation will not change much. Sealing of interpanel seams and the technology for its implementation must be known to the people doing the work and strictly observed by them. In case of violations in work, there is a risk of improper execution, and all work will be down the drain.
The seams must be insulated on both sides. There will be no significant improvements if the joints are sealed only inside the house, because it is necessary to make the connection of the plates closed along its entire length, and this cannot be done inside the dwelling.
Liquid that got inside the seam two floors above can easily seep into the apartment and create many problems. Therefore, if possible, it is best to seal the entire area of \u200b\u200bthe house by teaming up with neighbors, which will allow the work to be carried out successfully.
Sometimes it is impossible to bring equipment to the house, lifting structures, which are designed to reduce financial costs during insulation, in order to cover up part of the connections. The cost of work can be different, the price will differ significantly if there is a need to call industrial climbers who seal at high altitudes.
This type of repair is carried out without opening the connections. The sealing of interpanel seams does not increase significantly. It is considered the cheapest way to fix problems with seams. If we take into account the technology of work, the repair of interpanel joints should be carried out only in the case of an ideal connection of the plates outside the house.
Sealing of any interpanel joints after such repair is not allowed. Seal interpanel seams - make the house much warmer.
Before carrying out the insulation of interpanel seams, it is required to consider it for the presence of defects. After, if necessary (although, most often, it happens), the old mastic is removed with a spatula. If the cement lies normally, there are no cracks, chips, this type of finish can be performed. But in reality, a high-rise building with an ideal state of wall joints is very rare.
Activities carried out with joints:
The mixture is mixed with a mixer, all work is carried out in accordance with the instructions. The sealing of panel joints must always be carried out in such a way that the joint is slightly larger than the joint. To make the groove being sealed look better after the work is done, you can glue the joints masking tape removed after all work has been completed.
Interpanel seams should be carefully examined to identify all existing defects. In case of visible violations of a part of the coating, the sealing of the slab connection must be carried out in the following sequence:
The need for the use of mounting foam is high, because only in this way it is possible to fill the voids between the slabs, which, undoubtedly, have had time to form there.
The most high-quality and reliable way of sealing seams is considered to be work using this technology. The price of the work will differ from a simple cosmetic repair, and the total cost will depend on the length of the area to be embedded.
The technology for repairing interpanel seams provides for the execution of work in the following order:
This sealant is usually found in the form of tubes empty inside, but material filled inside is also on sale. In size, it should be slightly, about 10% larger than the connection itself, but it must be installed with a spatula, slightly pressing into the putty - mounting foam. This product must not be damaged during work, so care must be taken. Joints must be sealed with mounting foam so that voids do not form. If this requirement is not met, all the work will be done in vain.
The use of technology will provide the owners with warmth. The materials are considered one of the best on sale today, the interpanel seam after their application will become waterproof, and this will make the dwelling inaccessible to the penetration of liquids. In addition, the wear resistance of the entire building increases, since it will not be destroyed from the inside. To seal the seams in any panel house reliably, this type of sealing is suitable.
It is better to entrust the work to professionals. You can do it yourself in the area of \u200b\u200b1 or 2 floors, setting up reliable loess to perform. On the floors above, it is wise to use the services of climbers. The technology for insulating interpanel seams provides for the elimination of all problems, and it is difficult for a person who has not encountered such work to carry out such activities.
✎ Why do seams flow in prefabricated apartment buildings?
✎
Does the sealing of interpanel seams qualify as a major overhaul?
✎ What to do if the walls begin to get wet in the area of the joints of the plates?
✎ corners of a panel house get wet what to do
✎ In what terms should the leak of the interpanel seam in the living room be eliminated
✎ balcony seam leaking application to the management company
✎ Who should seal the interpanel seams in an apartment building Let's try to answer some of them →
as the most effective solution problems of poor sealing of interpanel seams by the method of industrial mountaineering can be the following method: Technology " warm seam". It is used to eliminate the problem of freezing of external enclosing panels and poor-quality sealing of panel seams. It is much more reliable and durable than other methods. The Warm Seam technology consists of the following components: Vilaterm-SP, Macroflex sealant, and Oksiplast mastic. The technical process of sealing and thermal insulation of joints with the "Warm joint" system consists of a set of basic operations. It is up to you to decide which way to choose, just remember, when ordering high-altitude work on sealing seams, that the miser pays twice: you can’t save on restoration repairs. For achievement complete technology sealing interpanel joints is not enough to complete all the work on the insulation of joints between the plates. In addition to the above procedures, it is necessary to carry out work to seal the joints plastic windows with the wall of the house, as well as the seams of the joints of the elements of balconies and loggias. For their processing, the "warm seam" technology is used, in which sealing work is performed using the "Macroflex" sealant. The above seam sealing technology involves the repair of a balcony, which consists in waterproofing its roof, as well as the repair of bay windows, loggias and visors that are inaccessible from the inside of the building.
Does this work relate to the repair of interpanel seams?
Answer:
Every month you pay for this service as maintenance and repair, there is such a line in the payment. This is called current repair of common house property. If within a month your written complaint is not fulfilled, write a complaint to the Housing Inspectorate
Answer: Contact the CC and demand to eliminate the shortcomings. In case of refusal to apply to the court.
Answer: File a complaint with the Housing Inspectorate and the prosecutor's office.
Answer: Usually within a month.
Work on sealing interpanel seams in a panel house can be carried out at any time of the year, since modern insulating material for insulation of houses withstands any temperature and does not lose its properties even at high temperature fluctuations. pluses dampness, draft, cold will remain in the past. it remains only to entrust the work to specialists
Answer ·
In fact, the technology described in this video will be quite useful. Indeed, today the issue of saving energy resources is relevant in almost every family. And there are really quite a lot of houses in need of such processing.
Sealing technology Warm seam - is one of the better ways insulation sealing joints and seams in panel houses. This technology is engaged in Assol LLC. They are professionals in their field, each of their work is of high quality and cheap. I recommend. You won't regret it!
This solution is very promising for the repair of seams in our time.
For a long time, the technology of sealing joints in industrial and residential buildings left much to be desired.
But after the “Warm seam” technology was developed, all the negative aspects of the non-tightness of the seams were eliminated. The principle of this technology is to use latest material which has elasticity. After all, the materials used earlier were rigid. They wear out under the influence of low temperatures. The peculiarity of the Vilaterm material is that when it gets into the seam, it fills the entire space tightly.
The material will gradually dry out. And along the perimeter of the seam, small holes are made, where building foam is subsequently placed. Holes according to technology are placed at a certain distance from each other. Vilaterm in combination with building foam provides high-quality sealing.
if the seams in a panel house are leaking, then the procedure for sealing the interpanel seams, I think, is a mandatory procedure for all residents, given our difficult climate, in winter it can be very uncomfortable without this procedure. Sealing the seams on the outside will help keep the heat inside. And it is better to entrust such work to professionals.
Do you carry out work on the repair of the roof of the balconies of apartment buildings (18-storey building, series I-155)?
Do you have all the necessary permits/certificates/licenses required by the service organization (Residential)?
Provide an estimate of the cost of the work, including the cost of materials, based on:
Roof area - 7 sq.m;
Snow removal required.
Dismantling of the old rolled roof;
Installation of a new roll roof;
Sealing of two air ducts facing the facade of the building (seal sealing).
Sincerely, Alexander
Answer:
Let's do it. We will help you organize the exit to the roof. We have all the available permits and doptsski.
The cost of work without clearing snow and sealing air ducts will be 18 tr. with the cost of labor and materials.
Snow removal is an extra job. They can be negotiated directly with specialists on the day of work.
Home / Articles / Interpanel seams Does the management company have to seal the seams?
/ What you need to know when ordering seam sealing?
/ Repair of interpanel seams and technology of their insulation
/ How to determine the series of a house and calculate the volume
/ How to close the interpanel seams of the apartment
/ Seam sealing - price determination
/ Causes of mold on the walls of the apartment
/ The walls in the panel house freeze through what to do?
/ Typical errors in sealing joints between panels
/ How is the inspection of the technical condition of interpanel seams, roofs and balconies carried out?
/ Frequently asked questions about seam sealing, what to do when seams leak?
/ How to get rid of fungus and mold on the walls of the apartment
/ How to properly insulate interpanel seams in a panel house?
/ Album of technical solutions: insulation and repair of joints of open and closed type
/ Technical instructions for sealing joints of prefabricated buildings with polymers
Readers turn to us with requests to explain whose duties include repair work on sealing seams, how housing offices that do not want to “fork out” for the restoration of joints between the panels of the house can be legally held liable. We have chosen the most interesting questions, our experts will try to give a detailed answer to them. We are looking for answers to your letters and calls in a variety of instances - from housing authorities to various government agencies.
Question: Our entrance filed a collective application with the Criminal Code with a request,. Public utility workers measured the temperature of the seams using a special apparatus. As a result, only a few apartments did not meet the standard parameters, the rest of the living space, according to experts, does not need to repair the seams. That's just a flood from the rain threatens all residents of the entrance. Docking seams almost completely spilled out on outside walls, but only the Criminal Code does not particularly care. How can you legally force public utilities to start repairing seams.
Answer: The current repair of the house necessarily includes the sealing of interpanel seams and has already been paid for by the monthly transfer of residents.
On a legislative basis, you need to be guided by regulatory documents:
4.2.3.1. Chapter
Local destruction of sealing seals of joints of prefabricated buildings should be eliminated as they are detected, preventing them further development.
Repairing the seams on the balcony - the responsibility of the tenant?
Question: We turned to the Criminal Code with a statement about the restoration of the seams on the facade of the building in the balcony area. Received a refusal, with a note that the seams are adjacent to the balcony, which is private property. How legitimate are the actions of the housing office?
Answer: There is no distinction in official documents for seams adjacent to the balcony and no. The outer side of the house is common house property, and therefore is subject to repair by the forces of the Criminal Code.
Question: The management company refused to repair the seams, citing that the repair work of the joints is not provided for this year. But the apartments are cold, and in the summer, after the rain, smudges appear. After what period of time are the seams checked for sealing?
Answer: There is no definite expiration date for interpanel joints, especially with time a lot of nuances appear: the quality of work, well-chosen material. On the other hand, regulatory documents oblige companies “…..2.6.2. When preparing the housing stock for operation in the winter period, it is necessary to:
Troubleshoot: walls, facades
“….. 4.2.3.1. Local failures ….. of sealing joints of prefabricated buildings should be eliminated AS DETECTED, preventing their further development …..”
If the repair of the seams is not provided according to the plan
Question: An application was submitted for the repair of interpanel joints in December 2015. The result of the measurements revealed the need for repair of interpanel seams. Only we did not have time to schedule for the winter of 2016, we promised that the joints would be repaired in the summer. Is it right to postpone the repair for such a period? How to repair interpanel seams in Podolsk?
Answer : the work schedule is drawn up in advance, the budget, estimates are calculated. Therefore, the utility company will carry out the repair of the seams as planned.
Is it possible to force the Criminal Code to return the money spent on repairing the seams?
Question: It took urgent repair seam on the outside of the house. Did it on my own. Is it possible to recover the spent funds from the Criminal Code? Should I get a refund for the repair of interpanel seams?
Answer: Before starting work, it is better to first find out if your management company will go for it. Sometimes a correct and sensible explanation of your situation on initial stage(rather than direct complaints and threats) can positively resolve your issue. You will have to confirm the importance of the repair and provide invoices, photos, materials spent. Provide all this with an application to the management company and in case of an unmotivated refusal or delay in the inspection / repair, you can collect a fee for the work through the court.
Question: The Criminal Code refuses to seal joints in apartments located in the corner of the house. Meanwhile, the rooms are damp and fungus. The public utilities motivate the refusal by a lack of funds, allegedly the budget only provides for a major overhaul of the house. Repair of interpanel seams, what type of repair is it? seams panel house What about ongoing repairs?
Answer: Restoration of the interpanel space refers to a major overhaul.
Question: At whose expense should interpanel seams be repaired?
Answer: At the expense of the management company. It is possible for the Company to repay the rent for the amount of costs incurred by the tenant to repair the seams of the apartment in the house, which can invite a third-party company to repair the inter-panel joints of the apartment. Accordingly, the Criminal Code cannot refer to the lack of funds for the performance of work. To delay the deadlines for the completion of work, arguing that work cannot be carried out in winter, or for some other reason, this is all on the conscience of the head of the management company directly. As we know, seam sealing works can be carried out in any weather in temperature regime from + 30С to 15 С. True, in case of rain and sleet, it is better to transfer the work to a more favorable day.
Question: How to apply for seam repairs? How to write an application for sealing seams of panel joints?
Answer : First you need to prove the importance of repair. This will require the research of specialists of the Criminal Code.
Such and similar situations with interpanel seams, when, in fact, the seams are leaking and help is clearly required. You need to go to the management company and write an application. In the case of a good manager, they do their own work to eliminate these defects. Since this event is costly, you can offer this option. You hire a company, for example Assol (for Moscow and the Moscow region) and pay directly to the hired company. Then, by agreement with the Criminal Code, they deduct the full amount of your costs for sealing the external seams from the rent. This is the most acceptable way for everyone. The customer receives the work that he orders. The manager does not bear the costs at the time of work. Well, we get an order paid for at a commercial rate and not on a residual basis.
Statement in supervisory authorities is written like this:
We write the full name and address of permanent residence in the upper right corner.
Be sure to include your phone number and email address.
below in the middle is the text: "Statement of violation of the rules for the maintenance and repair of residential buildings";
How often should the management company inspect and repair interpanel joints?
In accordance with paragraph 4.10.2.9 of the Rules and Regulations for the technical operation of the housing stock, control over the state of sealing of the joints of the outer walls of prefabricated buildings and interfaces along the perimeter of window and door blocks should be carried out: the first - three years after sealing, the next - after five years.
In accordance with paragraph 4.2.1.7 of the Rules and Regulations for the technical operation of the housing stock, Panel joints must meet three requirements: water protection due to sealing mastics in compliance with their application technology, ensuring surface preparation; air protection due to sealing gaskets made of poroizol, gernit, vilaterm, tow, resin rope or other materials with mandatory compression of at least 30-50%; thermal protection through the installation of insulating packages.
Regulated opening of joints against temperature deformations: vertical 2-3 mm; horizontal 0.6-0.7 mm. At the joints closed type waterproofing is achieved by sealant; air protection - sealing materials with mandatory compression of 30-50%; thermal insulation - with heat packs or a device of "woofers", the width of which must be at least 300 mm. Butt joints with leaks must be sealed with outer side effective sealing materials (elastic gaskets and mastics) by specialists in as soon as possible(in small volumes during the preparation of houses for winter).
Frequently asked questions about seam sealing:
/ MC does not fulfill its obligations where to apply?
/