The focus will be on not only the general aspects of the setup modern generation devices, but also specific models. Installing the configuration may require both working with the technical component itself and downloading additional software from official sources.
If you have any questions, please let us know
As with the entire family of TP-Link routers, configure wifi router can be done in the following way:
For the Internet from Rostelecom, setting up TP Link TD 8816 and 8840T modems is performed in several steps. Network equipment supports all the basic functions that will allow you not only to get a connection on a PC, but also to connect a digital set-top box.
Get ready for an express trip across the Internet! It doesn't matter whether you're watching streaming video, downloading new programs or checking email - ADSL modems from the TD 88XX line will allow you to get it all at the highest available line speed. Models for Rostelecom TP Link TD 8840T and 8816 support settings for connecting to Ethernet both one computer and a local LAN network at home or office. Installing the modem is very simple, and specialists from the service provider company cable network Rostelecom will help you meet all your special requirements. You will find more detailed instructions in the following sections.
The device can be wall-mounted or placed on a desktop. The modem mounted on the wall can be positioned with the indicators up or to the side.
Attention! If the cable modem is mounted on plasterboard wall try to position it so that at least one screw is attached to the profile. This will keep the modem more firmly attached to the wall.
To prevent the ADSL modem from overheating, do not close it. ventilation holes on the sides of the device.
To install the TP Link TD 8816 or 8840T modem on the wall, you need to: the following sequence actions:
When installing the router in a horizontal position, you need to place the modem in such a way that:
Before starting work on TP Link TD 8840T and 8816 for Rostelecom, make sure the following items are included in the kit:
If something is missing, contact your provider or purchase it from electronics stores.
The splitter included in the kit is a special filter that will allow you to separate telephone and Internet signals into two different cables. Before connecting the splitter, it must be secured to the wall with a screw. A common telephone cable is connected to the input connector. The two ports on the other side are for connecting a modem and a telephone. They are easy to recognize thanks to their symbols.
The TP Link TD 8840T router from Rostelecom supports setting up up to four local connections via a standard Ehernet cable, but, in addition, it also has an additional port that will provide a connection to the network using the computer’s USB input. The TD 8816 modification is similar in functionality, but can only offer one classic Ethernet port.
On back wall Both devices have ADSL ports, power ports, as well as power and reset buttons.
Attention! The Reset button, located on the rear panel, is used to turn off and restart the modem from standard parameters. You may need to restart your device if you have problems connecting to the Internet. You won't have to use this button often.
After familiarizing yourself with the features of the device, you need to connect one end of the ADSL cable to the modem connector. Next, plug the power cord into the port on the router and into an outlet. Also check that the power button on the back of the modem is turned on. At correct connection the corresponding indicator on the front panel will light up. Now you need to connect the Ethernet cable to the router and the connector on the computer.
After completing these steps, the connection to the TP Link TD 8840T or 8816 ADSL modem for Rostelecom will be completed.
To log into the router's web interface, you need to establish a wired connection via an Ethernet cable to your computer. In the OS, the network parameters should be in the mode of automatically obtaining an IP address. If everything is done correctly, the connection will be established automatically. Now open the browser, enter the network address of the router (192.168.1.1) and in the window that opens - the password and login for authorization (admin/admin).
The TP Link TD 8840T/8816 web interface is divided into several frames. At the top there is a navigation menu, and mainly – information and parameters of the selected section.
For the fastest and easiest router setup the best option will become Quick Start, as the name itself indicates. By clicking on the appropriate item, a short description of the router’s capabilities will appear on the screen.
After clicking on the Run Wizard button, the software will briefly walk the user through the basic setup steps.
The first one is choosing a time zone.
The next step is to set the operating mode of the router. In the case of an ADSL Internet connection from Rostelecom, the PPPoE/PPPoA type is most often used.
Having selected it, enter your username and password. Data for authentication in PPPoE mode is issued by the provider at the representative office when concluding a contract.
After clicking the last Next button, the settings will be saved and applied.
Unfortunately, TP Link TD 8840T and 8816 routers do not support wireless connection. For creating Wi-Fi networks You will need to purchase a router or wireless access point. This will allow you to distribute the Internet to many devices and ensure the work of a home or work group.
Setting up the TP Link TD 8816 and 8840T routers consists of three steps - installation, connection and entering Internet parameters from Rostelecom. The functionality of the routers will be sufficient for home or office use, but if you want to distribute the Internet a large number devices will need to purchase additional network equipment, since modems have only a few Ethernet connectors.
I noticed that in the comments to various articles on the site, they ask questions about Wi-Fi connection routers to regular ADSL modems. Many people have problems setting up such a connection. But, there is nothing difficult there. In this article we will look at the connection diagram and configuration of the ADSL modem + router combination. We will connect as usual network cable. Which you can buy, or take the one that comes with the router/modem.
Why connect two similar devices at all? If you have ADSL Internet, then it’s clear that you need a modem. There are many modems that do not have the ability to distribute Wi-Fi, but we need Wi-Fi, it’s difficult without it now :)
So, there are two options:
As you can see, everything is very simple. We need the modem itself (which should already be configured and distributing the Internet), network cable (which is included with the router), and the Wi-Fi router itself. Now we will connect and configure all this.
By the way, we already have a similar article on. You can view.
Before connection, Necessarily do it on a Wi-Fi router. Even if it is new, from the store.
Next, take the network cable. We connect one end to the modem in LAN connector (it is usually signed and highlighted yellow) . Your modem may have several LAN connectors. You can connect to any.
We connect the second end to the router in blue WAN connector. Look carefully.
Here is the entire connection diagram. If you reset the settings on the router and your modem distributes IP automatically, then the router should already distribute the Internet via Wi-Fi. And via cable, to the router, you can connect the devices that you had connected to the modem. Here are the instructions, just in case.
If it doesn't work automatically, then let's check the settings. We will only configure the router, we will not touch the modem. But your modem must be configured, and the Internet must work through it.
You need to check whether the router settings are set to automatically obtain an IP address. Provided that the modem distributes IP automatically.
Go to your router settings. If you don't know how, then...
Go to the tab WAN. Depending on the company and model, this tab may be called differently. Internet, network, etc.
And see what's in the field WAN Connection Type (WAN connection type) it was found Dynamic IP (Dynamic IP address). Set and save settings. This is the example of TP-Link.
Reboot your modem and router.
Everything should work. If it doesn’t work, then describe the problem in the comments to this article, and we’ll figure it out together.
Best wishes!
Also on the site:
How to connect an ADSL modem to a Wi-Fi router using a network cable? Connection diagram and setup updated: August 19, 2014 by: admin
A router with a built-in ADSL2+ modem TP-LINK TD-8817 allows you to organize access to the Internet via ADSL and connect one network device. It is a low-cost networking solution for homes and small businesses that is still very much in use today. Software The modem is easy to set up and is suitable for use in the networks of most providers.
To configure the equipment, you need to enter the modem’s IP address in the address bar of your browser: 192.168.1.1 and enter your login/password to log in. The default is admin/admin.
Setting up a connection to the provider is carried out in the “Interface setup” menu, subsection “Internet”
You can see which VPC/VCI correspond to which PVC number by clicking on the “PVCs summary” button
We select the PVC profile in accordance with the settings issued by the provider. When choosing PVC7, you can specify non-standard values that are not in the table.
Standard VPI/VCI parameters
The Rostelecom provider for Rostov-on-Don uses VPI=0, VCI=35, for Rostov region VPI/VCI may be non-standard (for correct values, see connection documents or check with technical support)
The DH/Comstar/MTS provider in Rostov-on-Don and the Rostov region uses VPI=0, VCI=33
Select connection type PPPoA/PPPoE
Connection types
Rostelecom in Rostov-on-Don uses PPPoA, Lately PPPoE
Rostelecom in the Rostov region uses PPPoE.
DTS/COMSTAR/MTS mainly uses only PPPoE
The service name is not required. In the account settings section, fill in your connection login and password (This information must be obtained from your service provider).
We select encapsulation LLC for the PPPoE type and VC-MUX for PPPoA. We set the IP address to dynamic, enable NAT, and the Default route must be enabled. We leave the remaining settings as default as indicated in the screenshot.
To save the settings, click the “Save” button. If everything is configured correctly, the “Internet” indicator on the modem will turn green.
If this indicator lights up red, then first of all you need to check that the login and password for the connection are entered correctly.
The Rostelecom company offers its clients services for organizing wireless Internet. Using Wi-Fi technology, it is possible to distribute the Internet from your desktop computer to mobile devices. When connecting to the service, the company provides users with everything necessary equipment, which in in this case includes a wi-fi router and a cable for connecting it. In addition to the Internet, it allows the user to use IP television. In this material we will tell you how to set up a tp link wi-fi router from Rostelecom, since this process often raises many questions.
Before moving on to directly setting up a wi-fi router from TP Link, it should be said that this company provides a whole line of routers. In our case, four models are used:
The presented devices differ only in technical details that do not in any way affect the setup process. All of them are perfect for organizing wireless Internet and IP television. At the same time, setting up a td w8961nd router for Rostelecom is no different from setting up a td w8951nd router and others. Thus, any of the above routers is the only required equipment to organize a Wi-Fi channel.
Before you start setting up a tp link wifi router for Rostelecom, the equipment must be correctly connected to your computer. This process is quite simple. In order to connect the Rostelecom tp link router, you need to connect your Internet cable to the LAN port ( of blue color), and connect the wire that comes with the router at one end to any port that has a digital designation ( orange color), and others to your computer.
If you did everything correctly, the router will be ready for further configuration.
The setup process is somewhat more complicated, although it does not require any special skills from the user. Before you start, you should clarify a couple of nuances.
If you have already connected to the Network using Rostelecom or another high-speed connection, you need to disconnect from it. You no longer have to manually connect to the Internet, since the router itself will take over this function. Its task is to connect to the Network and distribute it via a wireless protocol.
If you did not have a connection to the Network, but used it using a local network or ADSL modem, then this procedure is not required.
Once you have decided on this, open your browser and go to tplinklogin.net or 192.168.0.1. Two fields should appear on the screen in which you will need to enter your username and password. By default they are assigned as admin and admin. This information is also indicated on the back of the router.
If you entered the name and password correctly, you will be taken to the main router setup page. This is where all the action takes place.
Important: if you were unable to access the settings page, you need to go to the local network settings. TCP/IP settings should automatically obtain IP and DNS addresses.
In order to configure Rostelecom Internet, in the right menu, select the “network” - “wan” position. In the new window, fill in the fields as follows:
You will see other parameters on this page, but you do not need to change them. Click on the “Save” button, and then “Connection”. After a moment, refreshing the page, you should see that the mode has changed to “Connected”. Thus, all models of tp link routers are configured, including tl wr841n and tl w8151n.
After setting up a tp link router for Rostelecom, it is also important to ensure the security of your connection. Initially, yours does not have a password and any device can connect to it. In some cases, this is acceptable, but more often a password is set to restrict access.
To do this, you need to go to the “Wireless connection” menu (all on the same page at tplinklogin.net or 192.168.0.1). Here you can set the name of your connection. This is necessary so that you can easily identify your channel and, if necessary, connect to it. You cannot use the Cyrillic alphabet in the name, only Latin letters and numbers of any case.
To directly protect your channel and set a password, go to the “Wireless Connection Security” menu. After selecting the WPA Personal option, enter the desired set of letters and numbers (at least 8 characters) in the Password PSK field. Be careful about the case, as it is taken into account when connecting.
This is where the security process ends: your Wi-Fi channel will be protected by a password you set and will be accessible only to people you approve.
If, in addition to the Internet, you are interested, then the same page on setting up a router will help you. This is done quite simply. Go to the “Network - IPTV” menu. And in the “port for IPTV” field, select the port to which the television is connected.
This completes the process of connecting the television.
Thus, installation and configuration WI-FI router tp link for Rostelecom using this instruction is a fairly simple procedure that provides you wireless internet and IP television.