Stairs. Entry group. Materials. Doors. Locks. Design

The installation has a multi-purpose purpose, from self-improvement and wound treatment, to germinating seeds and accelerating plant growth.

In fact, it has been noticed that if plants are watered with living water (anolyte) in winter, they begin to bloom.

Wounds treated with dead water (catholyte) heal faster. In terms of improving the health of your own body, I can only say one thing, this is a purely individual and voluntary matter.

A lot of articles on the use of water divided into fractions were published at one time - if you want, you can easily find them.

This device can be assembled without any preliminary preparation from readily available means found without leaving home.

The main parts are electrodes. There are no special difficulties in manufacturing. The only thing that definitely needs to be noted is that the material from which they are made should only be food grade stainless steel. Technically, as you understand, it will not work for such an installation.

As you can see from the picture, nothing complicated, two L-shaped plates with a hole for fastening and contact.

One plate has a peculiar cut - when the middle protrusion is bent at an angle, it becomes a hook for hanging the bag.

It is not necessary to make such a fastening cut on the second plate.

The next part to be manufactured is the stiffening plate. It is designed to prevent the electrodes from touching each other in any way during operation of the device. 220V in water, you know, is an unpleasant thing.
When using a regular polyethylene lid for a jar as a supporting structure, this plate will not be superfluous at all, since during operation of the device a slight, although almost imperceptible, heating is observed, and it is known how heated polyethylene behaves. So, just in case, it won't hurt.

The next item is a bag for collecting catholyte. This is where it will definitely be difficult without women’s hands.

The material for the bag is thin tarpaulin. For example, the tarpaulin from a gas mask bag came in handy for me. The selection criterion is heavy blowing of air through it. It is better not to use synthetic materials - it is difficult to guess what kind of nastiness they will produce in the work.

When these components are ready, you can start making the lid. A regular jar lid will do. You need to make 3 holes in it: 2 mounting holes, one gas outlet.

When the device is operating, gas emissions are noticeable near the plates. Apparently the processing is carried out according to the type of weak hydrolysis, therefore the release of gas is a by-product. This hole is just for equalizing the pressure inside and outside the jar when the lid is closed.

The order of assembly of the device is clearly visible in the figure below:

As you can see, nothing complicated. It may be noted that there should be two nuts on each bolt. One for fastening the electrode, the other for ensuring reliable contact. For contact, pads from diodes of the KD202 type are used, sandwiched between two washers.

Any diode with an operating voltage of about 400 volts can be used. The only condition is that you need to connect it as shown in the figure, otherwise you will end up with catholyte not in the bag, but around it, i.e. it's the other way around.

If you use the KD202 diode, then you can directly attach the anode plate to its thread, note - the anode plate, because It has an anode on its body. And the cathode is then connected directly to 220.

True, I myself used a diode bridge. As you yourself understand, a full-wave rectifier has twice the performance.

During operation you can notice the following:

• The edges of the bag should be slightly above the water level to prevent mixing of fractions.
• Exposure time is 10-15 minutes. Or until the jar is slightly heated. You can, of course, look up the literature and measure the acidity of the catholyte with litmus papers, etc., but I think this is unnecessary. The strength of catholyte can be determined by its smell.
• Do not use water directly from the tap. Given the chlorine contained in it, it is quite possible to assume that HCl will be present in the catholyte, i.e. hydrochloric acid. The water needs to stand for at least 4-5 hours.

All dimensions are based on a 3-liter jar

Addition from our reader Mikhail Klychkov ( [email protected])

Hello. The described method of obtaining “living” water has one drawback. The fact is that using a separation bag is quite troublesome. You need to take out “living” water very carefully so as not to mix it with “dead” water. It is not comfortable.

I came across an article with a different method of obtaining “living” and “dead” water.

The point is this. You need not one dielectric container for water, but two. Containers are needed without necks, i.e. with straight walls. Place the containers next to a small gap and pour approximately equal amounts of water into both (but not to the brim).

We place the anode in one container and the cathode in another. Now a little subtlety. It is necessary to make a conductor for installation between the containers. To do this, a clean cotton roll is wrapped in clean gauze and moistened with water. All this is placed between the banks so that the ends of the bundle are in both banks, i.e. We connect the liquids of the cans with such a kind of jumper. Ions will move along this jumper and accumulate in different containers.

After “dividing” the water, it will be enough just to turn off the voltage and remove the “jumper” - “live” water in one jar, “dead” in another.

The same article indicates that in the break of one wire coming from the rectifier bridge to the electrical network, you need to turn on a 15...25 W 220 V light bulb (such low-power ones are apparently installed in refrigerators, for illuminating sewing machines, etc.).

Firstly, this will protect the circuit from a possible short circuit (with a “short circuit” in the circuit, the light bulb will only burn at full intensity). And secondly, it is needed as an indicator of the end of the process. We begin to separate the water - the light comes on. Gradually the brightness of its glow decreases. When the lamp goes out completely, the separation of water can be considered complete.

I hope this information will be useful.

Treatment of diseases with living water

M- dead water
AND- living water

Different from regular tap or bottled water. But many may think that special, complex equipment is needed to prepare living water with miraculous properties. Scientists have developed such equipment, but we can easily do without it. It is not difficult to prepare living water at home. The main thing is that you first need to let it stand for at least half an hour in an open container so that the chlorine disappears. If the water clearly smells of bleach, then you need to let it sit longer. If the water in your area is not chlorinated, but fluoridated, you cannot use it to prepare structured water; you will have to buy bottled drinking water and carry out all further operations with it.

Here are a few methods, decide for yourself which one is the best.

Preparing living water at home

1. Freeze ordinary raw tap water in the refrigerator. Fill the pan by placing it in the freezer on a piece of cardboard or a sheet of plywood. After the water has completely frozen, let it melt at normal room temperature. You can take a plastic bottle, but you only need to fill it 80%, because when it freezes, the ice expands greatly and the bottle may burst. For the same reason, you can’t freeze water in glass containers; it will burst, even if you don’t cover it, it’s been tested. Moreover, even plastic containers for storing food burst. I freeze the water in 2-quart plastic Norwegian ice cream containers, covered but not sealed tightly. Very comfortably. After defrosting, such water can already be drunk, but in order to be treated with water, or to lose weight with the help of water, this is not enough.

2. This method completely removes deuterium. We do everything as in the first case, but when the water begins to freeze, you need to remove the completely emerging crust of ice. It contains deuterium, it freezes earlier. After the bulk of the water has frozen, you need to rinse the frozen piece under running cold water. It must be transparent, because the most harmful impurities are removed from the surface of the ice. Then you can melt all the ice and drink the melted “living” water.

3. Heat the amount of water we need to 94-96 degrees. Before the first signs of boiling appear, remove the pan and cool the water sharply, then freeze, then thaw. In this way, prepared water goes through the phases of the usual natural cycle: evaporation, cooling, freezing, thawing. And although this method is much more complicated, such water is especially useful - it is rich in extraordinary internal energy. I haven't tried this method, I just read about it.

4. With this method, water, in addition to acquiring a characteristic structure, becomes cleaner from many impurities and salts. To do this, we keep it in the freezer until more than three-quarters of the water volume freezes. There will be unfrozen water in the middle of the container, which needs to be poured out by carefully piercing the ice with a metal object heated over a fire. The remaining ice should melt. The time required for your container to freeze can be determined experimentally. It can range from 6 to 16 hours. My 2 liter container takes about 12 hours to freeze to this state. The meaning of these manipulations is as follows: clean water freezes faster, the bulk of unnecessary compounds freezes slower, so all the dirt accumulates in the center and is in solution.

I used this method while we had old rusty plumbing. Black flakes of dirt floated in the center of the ice piece, which were not visible in unfrozen water.

I also want to say about the object you will use to pierce the ice. I use a heated spoon, since it is not recommended to use sharp objects such as a knife or an awl, because they carry the energy of aggression and destruction, and we need to restore health, not destroy it.

5. To get the best effect, double cleansing should be used. Let the water settle, then freeze. We remove the first thin ice layer that forms, which contains quickly freezing harmful compounds. Next, we re-freeze three-quarters of the entire volume and remove the remaining unfrozen fraction of water. We get significantly cleaner and structured water.

Here five ways to prepare water structuring. Choose the right one.

Melt water should be consumed immediately after the ice melts. You can cook food on it, however, when heated, the healing properties are lost. In any case, such water is much cleaner than simple filtered water, and if you have a freezer that can hold water for both drinking and cooking, then I can only congratulate you.

How much living water should you drink daily?

To drink, a person needs at least 30 ml per kg of body weight. That is, if you weigh 60 kg, then you should drink at least 1.8 liters of pure living water daily, without any impurities or additives.

This living water is ideal for drinking and maintaining good health. I’ll tell you in the next article what to do next with frozen and thawed water so that it acquires the healing properties necessary for losing weight and getting rid of health problems.

Alternative treatment with living and dead water is becoming increasingly popular. This method seems to have come to us from Russian fairy tales. In fact, a liquid with medicinal properties is formed as a result of electrolysis. In this article we will look at how treatment occurs, and also cover the topic of “living water - preparation”.

What does living and dead mean?

Dead water is acidic, its electrical potential is positive. Living water is a negatively charged liquid and has a pH greater than 9, meaning it is alkaline. Both types of water are used in alternative medicine. Treatment takes place with living and dead water.

Effect on the body

What are the benefits of living water?

Living water stimulates vital processes in the body:

1. Rejuvenates the body
2. Boosts immunity
3. Accelerates metabolic processes
4. Heals wounds

Properties of dead water

The properties of dead water are also very valuable:

1. Good disinfectant
2. Has a bactericidal effect
3. Relieves colds
4. Eliminates fungus

Treatment with living and dead water has become popular because its scope of application is quite wide. Next, we will consider such an issue as living water - preparation and the necessary equipment for this.

What do you need to have?

To prepare the required water, special activator devices are sold. You can make them yourself at home. What you will need for this:

1. Water. The ideal option would be spring water, but not everyone can find it, so regular tap water is fine. It needs to be left for 24 hours.
2. Two glass mugs
3. Two stainless forks
4. Bandage and cotton wool
5. 20 W lamp.
6. Wire with plug

Most homes have these items. If something is missing, you can buy more.

Living and dead water - preparation

To prepare living water you need to perform quite simple manipulations:

1. Place the forks in the cups with the tines facing up;
2. Attach a diode to one of the plugs, the end of which is connected to the wire;
3. You can make the system stronger by using electrical tape;
4. Attach the free end of the wire to plug 2.

Ready. Now all that remains is to plug the plug into the outlet. Place the diode against the lamp. If the lamp is on, then everything is done correctly. Turn off from the network. Now prepare a “bridge” for the ions - wrap the cotton wool in a gauze bandage.

Fill the cups equally with water and place a cotton wool bridge so that it connects both cups. That's all. You can now connect the system to the network. After 10 minutes you will have ready living water.

Results

After disconnecting the system from the network, remove the bridge. In the cup to which the diode was connected, the water will be dead, since there is a positive charge there. In the other, living, negatively charged water.

We remind you that plugs should be removed from the water ONLY after disconnecting the device from the mains. Otherwise you will get an electric shock.

So very simply, you can build a system yourself at home and carry out treatment with living and dead water.

Preparation of melt water

Freezing water also produces a very useful liquid. It is not living water, as some say. Read more in the article: But it also has a number of useful properties and you can make living and dead water from it.

To prepare the water, you need to let it sit for 24 hours, or clean it with a filter. What's next:

• Heat the water without bringing it to a boil. This will eliminate some harmful compounds.
• Cool the liquid at room temperature.
• Neutralization of water from deuterium. Throw away the first ice that forms during freezing; it will contain this dangerous isotope, since it freezes first at higher temperatures.
• Place the liquid back into the freezer. It freezes and looks like this: transparent at the edges, white in the center. Pour boiling water over the white part and remove. It will contain harmful substances. Transparent ice melts and you can use it for drinking.
• Melting should occur at room temperature. The resulting water can be drunk, and you can also wash your face with it. When boiled, such water may lose its medicinal properties, so you should not do this.

Recipes for treatment with living and dead water.

Here are some recipes for how to treat with living and dead water:

1. Allergy. Gargle with dead water after every meal for three days. 10 minutes after rinsing, drink about half a glass of live water.
2. Constipation. Drink half a glass of living water.
3. Skin rashes. Wipe your face with dead water for about a week.
4. Angina. Gargle with dead water ten minutes before eating. Afterwards, drink a quarter glass of living water.
5. Diarrhea is treated with half a glass of dead water. If it doesn’t help, then you can drink the same amount in an hour.
6. Liver diseases and their treatment with living and dead water. The first day, drink half a glass of dead water 4 times. Then for the rest of the week, take half a glass of living water and the same number of doses.
7. Migraine goes away after drinking half a glass of dead water.
8. Gastritis. Half an hour before meals, drink living water as follows: a quarter glass on the first day, half a glass the following days. Course – 3-7 days.
9. Pressure. If your blood pressure is low, then drink half a glass of living water 2 times a day. If the pressure is high, then use dead water. Don't drink for more than a week.

Many of us have heard about the so-called living and dead water. This is discussed in books, this issue is touched upon in cinema, and finally, you can find information about such water on the World Wide Web.

And this is not fiction, living and dead water really exists. Let's talk about this in more detail.

Dead water (anolyte) is a solution obtained as a result of electrolysis, which has a large positive charge and a strongly acidic acid-base balance. Anolyte is known for the following properties:

• disinfectants;
• anti-inflammatory;
• antimycotic (antifungal);
• antiallergic.

Why does anolyte have such healing properties? There are no miracles here, everything is quite natural and can be explained from a scientific point of view.

The fact is that during the electrolysis process, chlorine and oxygen radicals and hydrogen peroxide are concentrated in the anode zone.

But they are the ones who help macrophages (the protective cells of our body) destroy the viruses, microbes, and fungi that come across them.

That's why contact of anolyte with a microbial cell leads to destruction of the microbial cell wall, leakage of cell components into the intercellular space, disruption of the functions of the ribosomal apparatus (it is responsible for the biosynthesis of protein from amino acids), and other unfavorable changes.

Living and dead water is certainly beneficial for the body, but so that it does not develop from a means of treatment into the category of “mutilation”, you need to know that:

• between the intake of dead and living water there must be at least two hours;
• When using living water not in combination with dead water, a feeling of thirst may occur. There is no need to suffer: drink acidified tea or compote;
• Living water quickly loses its properties, since it is an unstable active system. At storing living water in a cool, dark place it can be used throughout two days, and then a new alkaline solution (catholyte) should be prepared;
• dead water can retain its properties for 2 weeks if stored in a closed container;
• both dead and living can be used not only as a means of treatment, but also as a way to prevent diseases of the body.

But how do you get living and dead water?

Apparatus AP-1 ^

This device has a fairly high level of quality; it is a so-called electroactivator. In its manufacture the following were used:

• food grade plastic;
• electrodes made of ultra-strong noble metals;
• A ceramic glass made from a special type of clay.

Positive features of the product are the following points:

1. The device looks very nice in appearance;
2. it allows you to get almost one and a half liters of water in just 20-30 minutes;
3. the device is characterized by low power consumption - at the level of a 40-watt light bulb;
4. The anodes of the device are made of titanium and coated with a platinum group metal, the cathodes are made of stainless steel.

But it should be noted that AP-1 costs significantly more than other devices. So, for a model with an indicator reflecting water quality, you will have to pay about 100 US dollars.

"PTV" ^

This device differs significantly from the previous three, since it is intended primarily for professional activities (sanatoriums, rest homes, medical institutions), although it is also used at home.

The main advantages of the device are:

• low power consumption for a product of this class – 75 watts;
• thick electrodes;
• long service life.

Besides, This device does not have a glass in which dead water is prepared. Instead, there are simply two separate containers separated by a special wood membrane.

But still, the disadvantage of this device is its cost. For home use device 130-140 dollars- already too much.

Are you concerned about your health and the condition of your back? Then be sure to read the article about how healthy they are, how much they cost, and how to make the right choice?

In the summer (and generally in the warm) season, it is very useful to swim in the fresh air. Summer shower cabins installed in the country can help you with this. Read all the most important and up-to-date information: prices, selection and installation features!

A very beneficial activity for health (including weight loss) is water aerobics. Read more about this sport in the article:
, it is very interesting!

Making living and dead water with your own hands ^

In addition to the officially manufactured devices discussed above, there are also homemade ones. We will offer one proven method for making water yourself. So, for this you will need:

• two stainless steel mugs;
• several syringes;
• ordinary wire - a cord with a plug at the end;
• one diode.

It is better to purchase mugs with handles, since you need to drill a hole directly in the handle and screw a diode into it (you should use diodes with a load of 220 volts, 6-amp).

The mugs themselves should be mounted on a stand made of non-conducting material. To strengthen it, you can cut holes in the stand that are equal in diameter to the bottom of the mugs, or you can simply glue the mugs.

Two syringes are glued together into a single U-shaped tube (to do this you will have to cut their tops), and another syringe is firmly inserted on top (directly into the middle of the crossbar of the imaginary letter “P”).

When the homemade device is ready, the mugs need to be filled with water and placed on a stand.

The prepared tube should be lowered into the circles so that one end of the letter “P” is in the left circle, and the other in the right.

After this, the upper syringe is pulled out all the way (thereby filling the tube with water). Then the end of the wire with a positive charge is connected to the diode (remember, it is installed in the handle of one of the mugs), and the end of the wire with a “minus” is connected to the other mug.

The plug is plugged into the outlet and left overnight. By morning, this unique device will produce dead water (in the mug where the diode is installed) and live water.

How to make water in the device? Instructions for use ^

Of course, not everyone will decide to create a device for preparing living and dead water on their own, and therefore you need to know how to work with the purchased device.

So, most devices have a container for living water and a separate glass for dead water (as we have seen, the glass can be fabric or ceramic).

Initially, the container is filled with water, and then the device turns on.

After this, the process of polarization of solutions begins and standard electroosmosis clearly occurs: the liquid flows towards the negative charge (accordingly, the anolyte level drops).

As soon as the redox indicators of the catholyte and anolyte are equalized, the water will flow in the opposite direction due to repolarization.

In this interesting way, factory-made devices provide the production of living and dead water.

What do people say? Reviews about the use of living and dead water ^

All descriptions, of course, are good, but you always want to learn about the use of devices and the water itself from ordinary people. Having collected all the information from the reviews, we offer some of the most common points:

1) making a device yourself is quite unsafe, since there is a high risk of water contamination due to the materials from which this device will be created;

2) the cheapest devices do not achieve the intended effect, and therefore their purchase is a waste of money;

3) water can be used to heal wounds. First, the wound is treated with dead water, and after drying, with live water.

Many people say that after they started using living and dead water, they completely forgot about pills and doctors:

“My kids always had runny noses, all year round. And then I decided to use living and dead water. And now for 4 months my children have not been sick at all!”

“My wife suffered from problems with her pancreas. I started drinking water and that’s it! Now she doesn’t have any pain at all, and she doesn’t need diets at all.”

“I started drinking this water just out of curiosity. Now I’m always in a good mood, and I work with such zeal that all my friends are jealous.”

Well, let the treatment with living and dead water benefit you too. Be healthy!

Video about the health benefits of living and dead water:

No related posts

35 reviews per article“ Treatment with living and dead water: fairy tales or reality?”

1. Alex11

   Healing with water is interesting. But the names are living and dead water, of course, you immediately remember fairy tales. And accordingly, such names do not add trust. Although the idea itself is interesting.

2. Paul

   I have been using the Iva-1 water activator for 2 years now, before that I used the Ap-1 activator. To be honest, Ap-1 is an activator that is not worth the money. The anode is not coated with platinum, but with Teflonium material. And this material is subject to anodic dissolution: (I found out that 1 anode electrode costs about 900-1000 rubles. And they sell this AP in bulk for 1500 rubles. Therefore, they saved on the material.
   Now I’m using Iva-1 activator, there’s a really good coating (I submitted it for examination) - it’s really a sputtering of ruthenium (this is a platinum group metal), so it just doesn’t dissolve during electrolysis. In general, it corresponds to its price - 4100 rubles. And about water, believe it or not, it really heals!!!

3. Elena

   It’s true, my grandmother used homemade medicine to heal tragic wounds.

4. Sergey

   I made electrodes from silver. I took two silver fifty rubles. One cathode and the other anode, or vice versa, depending on where the + or - of the power source is

5. Yuri

   Two fifty kopecks of what standard? To make a good silver electrode you need 999 standard - the highest, the standard means how many grams of silver are per 1000 grams. Your fifty dollars are most likely 925 standard - this means that along with silver there are also impurities of other metals and when you supply electric current to such an electrode, on the contrary, you will make the water even worse. I advise you to buy a water silverer, there are many of them on our market, for example, IVA-2 Silver, this installation already has an electrode with 999 fineness. Otherwise it's up to you :)

6. Marina

   To be honest, the phrase “dead water” sounds somehow strange and even repulsive, but in fact it is very useful, no less than the so-called “living water”. Having learned that the properties of water can be changed, I bought a special device and began to use water for medicinal purposes. The result was amazing: I began to feel much better, the headaches went away.

7. Anatol
8. Albert

   I watched a TV program about the unusual properties of water. It turns out that water has the ability to change its crystals depending on its surroundings. Scientists took a drop of water and played a recording of some classical music or children's laughter next to it, and the water crystals took on various beautiful shapes in the form of snowflakes, etc. They did the same thing with another drop, only the recording was different, for example, hard rock or swear words. In this case, the water crystals disintegrated into “torn” pieces or took on ugly shapes. Like this…

9. Julia

   I read an article by a doctor of chemical sciences about ionized water, “Arguments in favor of alkaline water. Letter to the editor from a doctor of chemical sciences." I recommend it to everyone http://www.labprice.ua/naukovo_pro_chudesni_vlastivosti_vodi/argumenti_na_korist_luzhnoi_vodi_list_v_redakciyu_vid_doktora_ximichnix_nauk

10. Holgina

    The idea of ​​dead and living water is interesting, but I don’t want to experiment on myself. It's kind of scary.

11. Andrey

    I don't trust such inventions. I prefer to drink regular filtered water.

12. Komzin Boris

    Our water cannot be used for treatment at all; it can only harm health if taken for a long time.

13. Alexander

    I tried it on myself back in 1985-95. The device was homemade. The pH was checked with ordinary litmus paper. Very effective remedy!!! I made the device and started using it, because I tried a lot of remedies for radiculitis, all kinds of ointments, massage, cast iron, copper shavings... nothing helped. Using J. and M. water, the pain went away in just a few (2-3) days. Until today, the pain has not recurred. Sore throat is treated within 2-3 rinses, after an hour. Yes, many diseases are easily treated. In addition, the effect of using water is long-lasting. And also, as far as I understand from experience, water is not purified, but decomposed into its component parts. To obtain the F and M components, it is better to use already purified water. Both derivatives are useful! So I recommend it to everyone!

14. platonii

    And what does the truth cure?

15. Daniel

    I make living dead water using the IVA 2 device. I mainly use living water, catholyte, for half a year. I noticed a weakening of the symptoms of vegetative-vascular dystonia. I began to do without many vasodilator medications. I feel better. Living water is certainly not a panacea, but it significantly alleviates painful conditions. It also has a tonic effect.

To prepare “living” and “dead” water you must have:

1. Water source.

2. Water filter: type " ZEPTER ", or "AQUAPHOR", or a regular jug ​​with a replaceable filter, or some other at your discretion.

3. A three-liter bottle, inside of which 100 - 150 grams are placed. The mineral flint, which contains the element “silicon,” can be used and shungite. These minerals can be purchased at the Esoteric store in the city and also a mineral or semi-precious stone corresponding to your zodiac sign. (For example, I have a rock crystal or quartz crystal).

Flint is, as a rule, a mineral-organic formation, which contains opal and chalcedony - amorphous and cryptocrystalline varieties of quartz. The basis of these mineral components of flint is silica - silicon dioxide SiO2. The chemical element silicon, which is part of flint in the form of dioxide, is one of the most common substances in nature. Most of the earth's crust consists of compounds of this most important chemical element, and silicon is also an integral part of many organs and tissues of the human body. In addition to silica, the mineral composition of flint includes more than 20 chemical elements, including Ca, Mg, P, Mn, Cu, Zn, etc. Thanks to the oxides of manganese and iron present in the composition, flint often has a very diverse color, in which they can be clearly distinguished shades of black, red and yellow. And it is precisely with the unique mineral-organic composition of flint that its ability to activate water and endow it with a variety of healing properties is associated.

4. A refrigerator in the freezer compartment of which there is space for a plastic container with water.

5. A plastic 2-liter container with a lid for installing it in the freezer. (Glass container is not suitable).

6. Electric activator for receivingof “living” and “dead” water, which I made myself. The appearance of the activator is shown in the photo. It consists of the following components:

Two electrodes made of food grade stainless steel with dimensions: 40mm wide, 200mm long and 1mm thick. A hole with a diameter of 6 mm for an M6 bolt was drilled 10 mm from the edge of the plates. After another 10 mm, the plate bends in the shape of the letter “G”. The plates can be purchased at the Starokonny Market in Odessa. Food-grade stainless steel can be distinguished from technical stainless steel using a conventional magnet - the magnet does not stick to food-grade steel, since it does not contain nickel. (By the way, according to some studies, the ingestion of increased doses of nickel into the male body causes the appearance of prostatitis and prostate adenoma. Guys!!! Check your spoons and forks!!! No wonder our ancestors used silver cutlery!!!);

Mounting box in which the brand diode bridge is installed KBU 1010, (can be purchased at the Radio Market), designed to convert alternating current of 220 Volts into direct current of the same voltage. In the installation box, the diode bridge is mounted on a patch strip of 4 contacts and two electrodes are connected. The spring view of the installation is clearly visible in the photo. The wires going to the plug, which will be connected to a 220 Volt power outlet, are connected to the “A C” contacts. One stainless steel electrode “cathode” is connected to the “-” contact - where “living” water (alkaline) will be formed, and a second stainless steel electrode “anode” is connected to the “+” contact - where “dead” water (acidic) will be formed. . A tarpaulin bag is placed on this electrode - a reservoir for collecting “dead” waste.yes.

A reservoir for collecting “dead water”, which is a simple bag made from an old tarpaulin fire hose sleeve. (You can sew it yourself using canvas mittens). A tarpaulin is mandatory - it does not allow “living” and “dead” water to mix.

After making the activator (if it is not possible to make it yourself, you can buy the activator via the Internet, its cost is in the range of 500-700 UAH) we proceed to a simpler operation - obtaining living and dead water. For this:

1. Pour purified water into a three-liter bottle with minerals and leave it for at least 1 day.

1. We go into the kitchen in the evening, usually before going to bed, and into a prepared 2-liter plastic container, pour the water infused with minerals and put it in the freezer for a day or even two. It is advisable to remove the container with water after 3 or 4 hours (or in the morning) and collect a thin 1-2mm layer of ice from its surface. This is the frozen so-called “heavy water” - deuterium, which is considered harmful to humans. After this, the process of freezing water continues.

1. We go into the kitchen again in the evening, usually before going to bed, and take out frozen water from the freezer. The plastic container should contain only ice, and it will be transparent at the edges of the container and slightly cloudy in the middle. The cloudy part of the ice must be washed with a hot stream of water from a tap or kettle. The remaining clear ice in the container is left to defrost overnight.

In the morning you get the so-called “melt water”, which you pour into an empty three-liter bottle, put the activator into it along with a bag for dead water (after having also poured melt water into it), plug the activator into an electrical outlet and maintain the activation time for 5 - 10 min. The readiness to receive “living” water can be roughly determined by hand by the temperature on the surface of the bottle - it should not exceed 30 -37 degrees Celsius.

ATTENTION!!!

FOR SAFETY PURPOSES, DO NOT REMOVE THE ACTIVATOR FROM THE BOTTLE WHEN IT IS Plugged In.

AFTER ACTIVATING THE WATER, FIRST, DISCONNECT THE POWER TO THE ACTIVATOR BY PULLING THE PLUG FROM THE SOCKET!!!

And this information is for the curious (from the site http://vital.in.ua).

Physics of the water activation process

When a potential difference is applied, the volume of water between the electrodes is exposed to an electric field, and an electric current begins to flow through the electrolyte.

Electroactivation of water is based on the transfer of ions and electrons through a semi-permeable membrane placed in an electrolyte solution, creating a potential difference in the liquid on both sides of the membrane. During the process of electroactivation in the cathode chamber, catholyte is obtained - alkaline (“living”) water, in the anodic chamber - anolyte, acidic (“dead”) water.

In the cathode chamber, water is enriched with highly active reducing agents, which leads to the formation of insoluble metal hydroxides, which precipitate:

Men+ + nOH– → Me(OH)n

Light metal hydroxides (Na, K) do not precipitate and remain dissolved - 100%.

In addition, direct reduction of multiply charged cations occurs in the cathode chamber (i.e., precipitation of metal molecules):

Men+ + ne → Meо.

These processes reduce the toxicity of water caused by the presence of heavy metal ions many times.

Water electrical activation circuit

K – cathode; A – anode; Мen+ – metal ions;

M – semi-permeable membrane;

1 – cathode chamber; 2 – anode chamber.

In the anode chamber, water is saturated with highly effective oxidizing agents. It is known that of all the processes of destruction of organic substances in water, the most powerful is electrolytic oxidation at the anode. Gases formed during electrolysis (destruction of microorganisms, decomposition of salts) and gases dissolved in water (CO2, SO2, NO2, N2, H2S, Cl2, O2, H2) evaporate in the near-electrode zone.

The high Redox potential and special forms of active chlorine compounds formed at the anode and participating in oxidation reactions eliminate the formation of toxic organochlorine substances and ensure complete oxidative destruction of dioxins (C12H4O2Cl4).

During the electrolysis of water with an inert anode (graphite, Ecosil), oxidation and reduction of water molecules occurs on the electrodes according to the reactions:

at the cathode 2H2O + 2e → H2 + 2OH–,

2H2O + 2Na+ + 2e → 2NaOH + H2.

at the anode 2H2O – 4e → O2 + 4H+.

If cyanide is present in water, the process of oxidation with ozone occurs:

NH2CONH2 + O3 → N2 + CO2 + 2H2O.

Ozone oxidizes ferrous iron and manganese:

Mn2+ + O3 + H2O → MnO2 + O2 + 2H+;

2Fe2+ + O3 + 3H2O → 2Fe(OH)3,

Antioxidants (or rather, electronic antioxidants) are the most important vitamins E, C, PP, K and a number of vital substances included in food products; the resulting ferric iron precipitates in the form of hydroxide.

Lead tetraethyl Pb(C2 H5)4 is also oxidized:

Pb( C2 H5)4 + 2 O3 → PbO2 + 4 CH3 CHO.Highly active oxidizing agents attack organic compounds and lead to their complete destruction (including nitrates, nitrites, herbicides, pesticides). For example, chlorophenol breaks down according to the reaction:

C6H5OCl + 26OH→ 6CO2 + 15H2O + HCl

Due to the saturation of the cathode chamber with hydroxyl groups OH-, alkaline water is obtained here, and the anodic chamber with hydrogen ions H+ - acidic water .

So, you have received special and healing “living” water.

WHAT IS THE SPECIFICITY AND HEALTHICALITY OF “LIVING” WATER AND WHAT PARAMETERS SHOULD BE CHECKED TO BE SURE OF ITS USEFULNESS?

“The operation of the device is based on the principles of wave superposition, i.e. interaction of the spectral components of impurities and the information carrier in antiphase, due to the fact that the phase of oscillations of the spectral components of impurities is determined with small fluctuations (~10 degrees) relative to the phase of oscillations of the same components of the information carrier.”

Did you understand anything??? Well,... of course... the principles of wave superposition... are known to everyone - this is... “quite simple”, and the rest is some kind of “nonsense”. I took this from a site offering “Akvadisk” for “structuring” water. It is assumed that after using such a disk we will receive “living” water. I leave the use of such a disk to the conscience of the “inventors”, since I believe that instead of “structured” water we will get “akhinized” water. Well, that's just for humor.

But still, how to answer the question posed above?

There is a lot of information about the usefulness of “living” water on the Internet, and not only, and you, if you wish, can verify this.

I will briefly outline the main generally accepted properties of “living” and “dead” water:

- "LIVING" WATER(catholyte, alkaline water, biostimulant) - very soft, colorless liquid with an alkaline taste, pH = 8.5-10.5. During activation, precipitation falls in it - all the impurities of water, incl. both radionuclides and water are purified. It retains its properties for several days when stored in a closed container.

This water is an excellent stimulant, restores the body's immune system, provides antioxidant protection for the body, especially in combination with the use of vitamins, and is a source of energy. It is not for nothing that it was called “living” water. It activates the body's bioprocesses, normalizes blood pressure, improves appetite, metabolism, food passage, and overall well-being.

It quickly heals various wounds, including stomach and duodenal ulcers, bedsores, trophic ulcers, burns. This water softens the skin, gradually smoothes out wrinkles, destroys dandruff, makes hair silky, etc.

In “living” water, wilted flowers and green vegetables quickly come to life and are preserved for a long time, and seeds, after soaking in this water, germinate faster and more easily; when watered, they grow better and produce a larger harvest.

"DEAD" WATER(anolyte, acidic water, bactericide) - colorless liquid with an acidic odor, sour, astringent. Its pH = 2.5-3.5. It retains its properties for 1-2 weeks when stored in closed containers.

"Dead" water is an excellent bactericide and disinfectant. You can rinse your nose, mouth, and throat with it during colds, during flu epidemics, after visiting infectious patients, clinics, and crowded places. It can disinfect bandages, linen, various containers, furniture, even rooms and soil.

This water lowers blood pressure, calms the nerves, improves sleep, reduces pain in the joints of the hands and feet, has a dissolving effect, destroys fungus, very quickly cures a runny nose, etc. It is useful to rinse your mouth after eating - your gums will not bleed and the stones will gradually dissolve.

And now about the parameters that will confirm that you have received “living” or “dead” water and how to control them? And even at home?

I am not going to conduct a general analysis (list the main criteria and standards) of drinking water quality indicators according to such organizations as the World Health Organization (WHO), the European Union, the State Sanitary and Epidemiological Surveillance Committee of the Russian Federation, and the State Sanitary and Epidemiological Service of Ukraine. This is a separate and large work, however, based on the publications and information known to me, I chose three “home” indicators of drinking water and “living” and “dead”, namely:

1. Hydrogen y p indicator (pH) is one of the most important indicators of drinking water quality.Depending onchanges in the pH level of water changes the rate of biological reactions, the toxicity of pollutants, and the degree of corrosionno aggressiveness of water, etc. For drinking water, according to WHO, the optimal pH fluctuates in the range 6.5 - 8.5 units. I control this indicator with this portable pH device - a pH meter (brand pH-025) with mandatory calibration in a special standard solution.

2. Total mineralization (TM)– a general quantitative indicator (the content of various minerals and salts in drinking water. WHO, as a maximum upper limit, established an indicator in 1000 m G/
l, given that the indicator of total mineralization always fluctuates depending on the characteristics of drinking water sources. I control this indicator with this portable device “salt meter” (brand COM 100) with mandatory calibration in a special standard solution.

3. Redox potential drinking water (Eh). By the way, our Sanitary and Epidemiological Supervision laboratories do not perform this analysis, even when monitoring the quality of drinking water at water intakes and distribution networks in populated areas. There is a preconceived notion that it is not necessary. It is not included in GSanPiN 2.2.4-171-10 (GSanPiN 2.2.4-400-10) “Hygienic requirements for drinking water intended for human consumption” and other SES documents. Which is very bad. While the World Health Organization (WHO) recommends drinking water with ORPnot higher than+50mv. In Ukraine, this condition is not met anywhere, and the ORP parameter (Eh) is not controlled anywhere. Well-known biochemist scientists suggest drinking water with ORP within the interval from plus 100 to minus 150mv.

I monitor this indicator with this portable device “ORPmeter” (brand ORP-169 E ) with mandatory calibration in a special standard solution.

Redox potential ORP (Eh or Redox potential) is a measure of the chemical activity of elements or their compounds in reversible chemical processes associated with a change in the charge of ions in solutions. Such processes are called oxidation-reduction reactions and are caused by the donation of electrons by one substance and the receipt of them by others. ORP (Eh) values ​​are expressed in volts (millivolts) with a positive (+) or negative (-) value. A little complicated, but... read on!

(Website “About Water” Mosin. O.V., Ph.D.) “And now the most important thing... ORP, like pH, is the most important characteristic of the internal environment of the human body, since it is directly related to the processes of life and metabolism. The norm of the internal environment of the human body is considered to be ORP from -100 to +200mv. The internal environment of the body is in a weakly oxidized and reducing environment. But the ORP of ordinary drinking water, which flows from the tap in an apartment, very often ranges from +170 to +350 mv. These differences in the ORP of the human body and drinking water often vary greatly. Waters close to the body's ORP are considered optimal. In this case, the electrical energy of the body's cell membranes is not wasted on correcting the activity of water electrons. Water is almost immediately absorbed by the body, since it is biologically compatible with the body in this parameter. The energy of cellular membranes is the highest level energy, which is the end product of the biochemical chain of nutrient transformation."

Water with ORP from +50mv to -100mv Due to its restorative properties, it normalizes the redox balance in the body, thereby:

normalizes the microflora of the gastrointestinal tract by stimulating the growth of its own normal microflora (bifidobacteria and lactobacilli) and suppressing pathogenic and opportunistic microflora, including Staphylococcus aureus, Salmonella, Shigella (dysentery), Aspergillus, Listeria, Clostridia, Pseudomonas aeruginosa, Helicobacter pylori (which is considered the main cause of peptic ulcers);

suppresses candidiasis (thrush) in the gastrointestinal tract and mucous membranes;

restores and activates the immune system in people with weakened immune systems and after immunosuppressive therapy, including after exposure to radiation and chemotherapy;

has powerful antioxidant properties;

has antimutagenic properties;

restores the detoxifying function of the liver;

has hepatoprotective properties;

has wound healing and anti-inflammatory properties;

has high antiviral and virucidal properties against the hepatitis C virus, genital herpes and herpes simplex virus type 1 (better known as “cold sores”);

has antiviral and virucidal properties against the influenza A virus, the most common influenza among people.

According to Russian and foreign scientific publications, in addition to the above properties, water with a negative redox potential:

helps eliminate infectious and inflammatory manifestations of prostatitis;

stimulates the processes of growth, physiological and reparative regeneration;

has an antispasmodic effect in renal colic;

has an antiseptic, diuretic (diuretic) effect;

influences the regulation of growth processes and activity of cells of all types of tissues;

is a biostimulator for the restoration of liver tissue;

normalizes metabolism;

causes a general anabolic effect;

is a general tonic for fatigue, asthenic conditions and for weakened patients;

helps reduce swelling and reduce arterial hypertension, reduces the intensity of allergic reactions and dermatoses, reduces osteoarticular pain;

is a means of preventing cancer;

reduces the need of a diabetic patient for insulin;

increases the activity of tissue respiration enzymes;

reduces the risk of coronary heart disease.

Does everyone understand the purpose of “LIVING” water?

Then make it and drink to your health!!!

“Maybe sprinkle it first with dead water and then with living water, huh???”