IN modern kitchens You can increasingly see built-in household appliances. And this is not surprising. Integrated stoves and refrigerators, washing and dishwashers, microwave and UHF ovens allow you to save the working surface and use it more functionally internal space cabinets And, of course, they give a more holistic and harmonious look to the overall kitchen design. How to build an oven with your own hands? You should start with the correct layout of the kitchen unit.

With a competent approach to developing a kitchen design project, the location of a free-standing stove or the “oven + hob” duo is inextricably linked with the supply of the hood to ventilation shaft. Therefore, even at the stage of starting repairs, you can clearly determine the location of the oven. And, accordingly, provide sockets for its connection.

However, not everything is clear here. The outlet must not be located strictly behind the oven. When the plug is plugged into it, a “dead” zone is formed, which will not allow the oven to move to the desired depth.

The option of locating the outlet below the oven level is also not very successful. It is much more convenient to first turn off the equipment, and only then remove it from kitchen cabinet. And not the other way around - when the need arises to disconnect from the network, start pulling out a rather heavy unit.

The best solution is to move the socket below the level of the countertop to a nearby cabinet. It would be ideal if the adjacent cabinet table near the oven would have drawers. Then in the cabinet itself you can back wall don't install at all. It is enough to remove the desired drawer and access to the outlet is open.

It’s also a good idea to screw an overhead socket to the side of a cabinet with hinged doors. It will not interfere with the internal filling of the cabinet, and it is quite convenient to use.

The main thing is that this cabinet does not turn out to be a table under the sink. Such close proximity to water and sewage drainage is undesirable.

Drawings on how to build an oven with your own hands

This task is not as difficult as it might seem at first glance. To facilitate installation, household appliances are produced in certain standard dimensions. You can always exchange one built-in oven for another without changing kitchen furniture.

The standards here are simple: any electric or gas oven is built into a 600x600 mm niche. Moreover, the width of the niche is 600 mm, taking into account the thickness of the side walls of the oven module (according to the requirements of most models, the finishing size of the opening must be at least 560 mm).

The depth of the oven is designed to fit under a worktop with a standard width of 600 mm. That is, the body to the front overhang should be 550-560 mm. It will not be possible to build an oven with your own hands under a narrowed countertop. But for an expanded one, in various design variations, it’s fine.

Nuances may arise in specific non-standard cases. Therefore, carefully read the instructions at the purchasing stage. household appliances. Some ovens require space for ventilation in the box design.

Or even a special cutout for air circulation in the bottom of the cabinet or countertop.

Typical design The cabinet for the oven is shown in the drawing.

If the cabinet table is “clamped” between adjacent modules, then there is no need for an upper tension bar. Many furniture makers do not install it at all.

If the height of the kitchen set is standard (840-850 mm with different tabletop thicknesses), then the height of the very side of the oven cabinet will be 720 mm. By simple calculations(720-600) we get a space of 120 mm at the bottom of the installation. More precisely, the free space will be (120-32) only 88 mm, minus the thickness of the bottom and shelf.

A drawer with a box 50-60 mm high is usually built into this space. If you increase the height of the bottom row of the kitchen to match your height (you can read about this), then the drawer will be deeper and more functional.

Actually, using the same principle, the cabinet “turns” into a cabinet for a built-in oven. We simply increase the height of the space in the bottom drawer.

But there's one here important nuance. The depth of the sides of a cabinet that has been increased in height must also be increased so that the gap between the wall and the cabinet body is not visible.

This means that the air circulation near the oven built in this way will be disrupted. It’s not for nothing that the instructions for ovens for installation in a pencil case include a separate drawing. In which you can see that you need to leave the drink under air circulation.

Therefore, a cutout should be provided in the countertop covering such a low cabinet for a built-in oven with your own hands. It can be covered ventilation grille.

DIY oven cabinet, drawings and calculations

Let's take as an example the calculation of a cabinet for a built-in oven standard sizes. Its drawing will look like this.

With a tabletop width of 600 mm, taking into account the overhang at the front and rear, the cabinet depth will vary between 460-500 mm.

If you decide to install the tension bar in the center of the module, then it should be lowered by about 10 mm relative to the sidewalls. Otherwise, it will interfere with embedding the hob into the countertop above the oven with your own hands.

If the body of the cabinet is made of 16 mm thick laminated chipboard, then the calculation of the parts will look like this.

Sometimes a drawer in the design of a box for an oven is completely abandoned. It is absolutely not needed as a storage place if the kitchen is large and the housewife has enough drawers and shelves in it. Then a “fake” (rigidly fixed facade) is placed on the opening under the oven.

Your repost will change the Internet :)

By installing the oven above the usual level, the cooking process becomes much more comfortable. In our article you will see different variants cabinets for the oven and find out what dimensions experts recommend for creating a module.

Two high modules are designed for mounting equipment. One cabinet is filled with a refrigerator and a storage shelf; the second has a built-in oven at countertop level and spacious shelves that cover the fronts.

Pencil case dimensions

Approximate dimensions of the cabinet (HxWxD): 2040x600x550 mm.

The area of ​​the room and design features make adjustments to the overall dimensions of the cabinet.

Dimensions for installation. Gorenje ovens are purchased complete with similar instructions for installation. The graphic example shows the Gorenje B2000P2 model.

1. Custom cabinet

This option is the most popular among buyers, since the master takes into account all the details of the layout during the kitchen manufacturing process. The main thing is to choose the equipment in advance and provide accurate data on the dimensions to the specialist.

A modern set without technology. All sockets for appliances are pre-wired. Next stage- installation.

Combination beige colour and wood textures on corner kitchen. In one pencil case there was a built-in oven and a microwave oven on a separate shelf.

White kitchen in minimalist style. The microwave oven and oven are built into a tall cabinet that closes the composition of the set.

Bright turquoise corner-shaped furniture. The independent oven set was installed at a convenient height level.

Strict interior, minimum details. For such a kitchen, it is better to choose built-in appliances.

The cabinet with the oven is located next to the hob, so the cooking area is concentrated in one part, leaving a large working area.

2. Factory pencil cases

Kitchen manufacturers offer customers ready-made options furniture for built-in appliances. The main difficulty is to ensure that the dimensions for installation coincide with the actual dimensions of the furniture. That is, you will have to do the opposite - choose an oven for certain parameters, or adjust the furniture during installation.

Remember, the control panel should be above waist level, and the installation height of the oven should not exceed your eye level, otherwise operating the device during cooking will not be comfortable.

Sketch of the kitchen section body, without facades.

In this section, telescopic guides of full extension measuring 550 mm are used as retractable elements.

The red line next to the size number indicates the edge. This means that this end of the part is the front (visible) and it must be lined with a furniture edge. If there are two lines, this means that both ends of the part of the corresponding size are covered with an edge.

In the given detailing of the kitchen section (module), the dimensions are indicated without taking into account the thickness of the edge.

Thickness furniture edges thickness up to 0.6 mm does not need to be taken into account in the size of the part . The part size will need to be reduced by the appropriate edge thickness if the edge, such as ABS, is going to be 1 or 2mm thick. For example: part width 400 mm, edge thickness 2 mm. It is necessary to paste over both ends of the part. Then the width of the part must be adjusted taking into account the thickness of the edge. Those. it will be 400 - 2 mm. - 2 mm. = 396 mm.

Kitchen section with drawer and shelf. Assembly diagram.

Drawer assembly diagram:

Drawings of kitchen section parts with assembly holes.

1. General drawing for left and right sidewalls.

3. Connection - shelf under the oven.

7854 0 0

Cabinet for oven and hob - assembly steps simplest design

March 27, 2018
Specialization: master in construction plasterboard structures, finishing works and styling floor coverings. Installation of door and window units, finishing of facades, installation of electrical, plumbing and heating - I can give detailed advice on all types of work.

Today we will figure out how to assemble a reliable cabinet for an oven and hob. Almost anyone can do the job, the main thing is to have it on hand necessary materials and tool.

Stages of work

Let’s figure out how to properly organize the work process; for simplicity, we will divide all activities into 3 stages:

• Preparation;
• Assembling the cabinet;
• Cutting an opening in the tabletop.

Preparatory work

To get started, gather everything you need:

• Chipboard blanks for furniture, They are made in accordance with the rest of the elements of the kitchen set. Standard width cabinets - 600 mm, depth - From 400 to 600 mm, the 600 mm option is most often used, most ovens are suitable for it;
• Furniture supports. The cheapest ones will do plastic elements, they are easy to use and easy to attach;

• Fasteners for structures. We will tighten the cabinet with euroscrews, which are also called confirmats. The drawer guides are screwed with 3.5x16 mm self-tapping screws;
• Drawer guides. It is better to purchase a ball version; it is much more reliable and durable than standard roller elements.

The tool you need is the following:

• Screwdriver. In the kit, stock up on equipment: attachments for self-tapping screws and euroscrews, drills of different diameters;

Additionally, purchase a special drill for confirmations; it makes a hole and at the same time selects a countersunk for the fastener head.

• Jigsaw. Necessary for drilling an opening in the countertop for the hob;
• Measuring devices, you can get by with a tape measure and a pencil.

Assembling the cabinet for the oven

Let's figure out how to assemble a cabinet for an oven. Regardless of the size of the structure, it is always assembled the same way:

Illustration	Description
	Side walls are being prepared. It is best to order them ready-made, but you can cut the material yourself using a power saw or jigsaw.
	The side panels are being prepared: The guide fastening line is drawn, the height of its location depends on the height of the drawer; Holes are drilled along the line of the partition on which the oven will stand. It is located above drawer.
	The guide is set, it is aligned with the outer end of the structure and the previously drawn line.
	The guide is fixed. For this purpose, self-tapping screws are used, which are located in holes specially designed for this purpose. There must be at least four fasteners per guide. Another guide is similarly mounted on the second wall.
	Preparing the bottom of the cabinet. 4 holes are drilled in it for confirmations, the distance from the front and back sides is 50-70 mm, the distance from the edge to the middle is 9 mm, since the thickness of the plate is 18 mm. If the thickness of the chipboard is 20 mm or more, then the indentation is made by half the thickness of the slab.
	Legs are attached to the bottom side. Points are marked with an indentation of 5 cm from the edges, and the supports are attached there. They are screwed onto 3.5x16 mm screws.
	The bottom is placed on the edge, the side of the cabinet is aligned with it. Holes are pre-drilled in it using a confirmat drill.
	Side walls are screwed. To do this, European screws are inserted into the holes and tightened with a screwdriver so that the head becomes flush with the surface.
	A partition is inserted on which the oven will stand. It is screwed with confirmations from the sides.
	The cabinet is almost ready. All that remains is to assemble the box according to the size of the opening and attach the corresponding parts of the guides to it.
	The finished box is inserted into the opening. The cabinet is ready, you can move on to preparing the tabletop.

Preparing the countertop for the hob

The tabletop can be either separate or integral for the whole working area. The cabinet is placed, the tabletop is fixed on it and the following work is carried out:

Illustration	Description
	The center of the panel location is marked. The line is drawn strictly perpendicular to the wall. For this marking, the outer part of the hob is pre-measured.

Kitchen with hob and oven with built-in refrigerator and inclined hood

The arrangement of furniture and appliances in the kitchen is quite complicated, especially if the square footage of the room is small. In this case, built-in appliances come to the rescue, for example, a hob or oven. This design allows you to significantly save space and make the kitchen design varied and modern.

Beautiful kitchen with built-in appliances for convenient use and space saving

A pencil case with a built-in oven in the kitchen composition

Comfortable, modern and practical option for the kitchen - a kitchen set with a built-in hob and oven. Such devices generally have a separate design. The hob is built directly into the countertop. The oven requires a separate place and cannot be placed on the floor. For this you need an oven box.

Built-in oven under the hob, color-matched to the kitchen interior

Its essence is that instead of an ordinary cabinet in kitchen set space is allocated for the oven. It is usually installed under hob, but you can choose any suitable location.

Convenient placement of the built-in oven at a height for ease of use

Oven box required element in the kitchen, if the unit itself is a built-in type.

Connecting built-in household appliances into special boxes

Kinds

Wide oven non-standard sizes for an exclusive kitchen

By choosing a built-in oven, you have the opportunity to diversify the design and furnishings of your kitchen. Unlike conventional ovens combined with a hob, these are a completely independent unit.

The location of the built-in cabinet is separate from the hob in convenient location and at a comfortable height

In addition to the difference between the functions of the unit itself, there are several types of cabinets for built-in ovens. You can choose the parting placement option that is most suitable for the size of your kitchen, layout and design.

Corner kitchen with built-in oven in the table under the hob

There are two main types of design: a cabinet under the hob with a drawer, or placing it in a pencil case (a tall cabinet with a special compartment and additional drawers). Each of these types has its own advantages and disadvantages. However, according to consumer reviews, placing the oven in a cabinet is much more convenient to use.

Bright kitchen with built-in appliances in the cabinet

Advantages and disadvantages

Built-in oven for convenient and comfortable use in the kitchen

Let's take a closer look at the pros and cons various types boxes for ovens. To begin with, it is worth noting that the design of a separate built-in oven has the advantage of ease of use, design, and freedom of placement.

Kitchen with original design with built-in hob and oven

Location of the structure in the cabinet under the hob

Oven built into the cabinet in a classic location - under the hob

– creating a common surface for cooking;

– suitable for people of any height;

– preserving the appearance of a standard stove with oven (for lovers of the classics).

– the need to constantly bend over while cooking;

– inconvenience when cleaning the oven;

– high probability damage to the electronic mechanism due to contact with large quantity water from the stove during cooking.

Wooden kitchen with stove and oven in the corner

Placing the oven in a pencil case also has its advantages and disadvantages

Built-in oven at a convenient height for the hostess, located in the cabinet-pencil case

– location at chest level reduces the load on the back during work;

– ease of care due to location;

– the ability to choose sizes to suit any height;

– gives the kitchen a new modern look.

Flaws

The only drawback of this design is that, being quite high from the floor, it requires additional reinforcement. When installing, you must ensure that the lower horizon is firmly positioned. Otherwise, the oven may collapse on the housewife’s feet while preparing dinner.

Fine cuisine in english style with appliances built into the cabinet

Choosing an electric oven with dimensions for the box

When you decide to buy a built-in oven, you need to pay considerable attention to the cabinet in which it will be located. You can purchase it together with an oven, however, they are often sold without a box included. In this case, you will need to select it yourself. What to look for when purchasing?

First of all, you need to know the exact measurements of the oven. The height and depth of the box should be 15-20mm larger for normal air circulation. In this case, the difference should not be greater, otherwise difficulties will arise during mounting and installation.

Installation and connection of an electric oven

Take care of electrical wiring in advance. Where the oven is installed, a wire outlet must be provided in advance, because this type The design does not have a plug, but requires direct connection to the electrical network.

When choosing a box, make sure there are strips that strengthen the horizon.

White kitchen with a ready-made box for built-in white appliances

It is also worth paying attention to the cabinet design and colors so that it fits harmoniously into the existing kitchen decor.

Kitchen with built-in appliances that are ideal in color and size

Should I do it myself?

Non-standard placement of equipment in a corner, in a custom-made table

In the absence of a suitable box on sale, the question arises: to make furniture to order, or to design everything yourself. In this case, it is better to entrust the matter to a professional. This is especially true for installing the cabinet and the oven itself, since this will also require the skills of an electrician.

Necessary tools for making a box with your own hands

However, if you have experience making furniture with your own hands, making a box for the oven will not be a problem. To do this, you need to take measurements of the electrical appliance and, in accordance with the data obtained, a drawing of the future product. Next, having necessary tools(saw, screwdriver, electric drill, wood glue) and materials (chipboard, countertop, dowels, furniture confirmations, screws, guides, legs for the box) you can easily make a cabinet for a built-in oven with your own hands.

Do-it-yourself ready-made cabinet for built-in appliances

But! If you doubt your abilities, entrust the matter to a professional who will make a custom-made cabinet in accordance with all your desires.

Case for oven and microwave oven in minimalist style, custom-made

Comfortable small kitchen with red decor made to measure

Video: Connecting the oven