Housings and reelsDanfoss solenoid valvesusually supplied separately and assembled on site.
Assembly is quick and simple, without the use of tools, ensuring optimal flexibility and readiness for use. The coil is replaced without stopping and draining the system.
On request, solenoid valves can also be supplied assembled.
EV210A is a large family of direct acting, on/off, two-way solenoid valves featuring small dimensions, designed for use in industrial equipment.
The compact design combined with a comprehensive range of coils allows the EV210A to be used in a wide variety of industrial applications.
· Two-position two-way
· Compact dimensions
· Direct action
· DN 1.2 - 3.5
· From G 1/8 to G 1/4
![]() EV210A Direct-operated 2/2-way compact solenoid valves |
![]() EV210A valve, stainless steel |
![]() Solenoid valve EV210A NC - 1.5B G 18F |
Solenoid valve EV210A - 1.2B G 18E |
![]() solenoid valve EV210A - spare parts |
![]() Solenoid valve EV210A 1 2 3 5 SS - 2.5SS G18E |
![]() Solenoid valve EV210A without coil |
![]() Solenoid valve EV210A NO - 1.5B G14E |
Specifications solenoid valves EV-210A
Order code |
Compound |
Hole size |
Exploitation |
Mat. seals |
Pressure drop |
Mat. housing |
|||
Normally closed |
Direct action |
||||||||
Stainless steel |
|||||||||
Normally open |
|||||||||
· Two-position two-way
· With servo drive
· DN 6 - 22
· From G 1/4" to G 1"
Brass valve body
NC (normally closed) and NO (normally open) options
· Threaded connection to ISO 228/1 or with NPT thread
![]() EV220A Servo-operated 2/2-way solenoid valves |
EV220A solenoid valve NC - normally closed |
![]() Solenoid valve EV220A spare parts |
![]() Solenoid valve EV220A NC - 6B G14N |
![]() Solenoid valve EV220A without coil |
Technical Specifications of EV-220A Solenoid Valves
Order code |
Compound |
Hole size |
Exploitation |
Mat. seals |
Pressure drop [bar] |
Mat. housing |
Kv m3/h |
||
Normally closed |
Servo |
||||||||
1,600 |
|||||||||
Normally open |
|||||||||
Normally closed |
|||||||||
Normally open |
EV220A Servo-operated 2/2-way solenoid valves w/ filter
EV220A is a series of compact, two-position, two-way, indirect-acting, servo-actuated solenoid valves specifically designed for use in machines and equipment with limited space.
Built-in replacement filter provides long lasting uninterrupted operation even in the presence of impurities in the working environment.
· Two-position two-way
· With servo drive
Built-in replaceable filter
DN 11
G 1/2"
Brass valve body
NC (normally closed)
Technical specifications of EV-220A solenoid valves with filter
EV310A is a large family of small, direct-acting, on-off, three-way solenoid valves designed for use in industrial applications, such as control valves.
· Three-position two-way
· Direct action
· DN 1.2 - DN 3.5
· From G 1/8" to G 1/4"
Valve body made of brass or stainless steel
![]() EV310A Direct-operated 3/2-way compact solenoid valves |
![]() EV310A Direct-operated 3/2-way compact solenoid valves without coil |
Technical Specifications of EV-310A Solenoid Valves
Order code |
Compound |
Hole size |
Exploitation |
Mat. seals |
Pressure drop [bar] |
Mat. housing |
Kv m3/h |
||
Normally closed |
Direct action |
||||||||
Normally open |
EV210B is a large group of direct acting, on/off, two-way solenoid valves for universal use. EV210B is a series of extremely reliable valves with high performance characteristics, which can be used in harsh operating conditions.
· Two-position two-way
· Series with improved performance characteristics
· Direct action
· DN 1.5 - 25
Valve body made of brass or stainless steel
NC (normally closed) and NO (normally open) options
ISO 228/1 from G 1/8" to G 1"
UL listed option with NPT (EVI) threads
![]() EV210B Direct-operated 2/2-way solenoid valves |
![]() Solenoid valve EV210B 3B NO BB clipon - 3B G 14E |
![]() Solenoid valve EV210B SS without coil |
![]() Solenoid valve EV210B 1 5 4 5 SS - 1.5SS G 18E |
![]() |
![]() Solenoid valve EV210B NC - 3B G 14E |
![]() Solenoid valve EV210B - 3B G 14F |
![]() Solenoid valve EV210B - BY coil |
![]() Solenoid valve EV210B - 25 B G 1E |
Solenoid valve EV210B - 6B G 14E |
![]() Solenoid valve EV210B - 2 B G 18N |
![]() Solenoid valve EV210B - 1.5B G 18E |
![]() Solenoid valve EV210B - 3 B G 14N |
Solenoid valve EV210B - spare parts |
![]() Solenoid valve EV210B - 1.5 SS G 18N |
![]() Solenoid valve EV210B SS BB Clipon - 3SS G 18E |
![]() Solenoid valve EV210B without coil |
Solenoid valve EV210B - 8B G 38E |
Technical Specifications of EV-210B Solenoid Valves
Order code |
Compound |
Hole size |
Exploitation |
Mat. seals |
Pressure drop [bar] |
Mat. housing |
Kv m3/h |
Coil voltage |
||
Normally closed |
Direct action |
- | ||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
Normally open |
- | |||||||||
- | ||||||||||
- | ||||||||||
Normally closed |
Stainless steel |
- | ||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- |
EV220B 6-22 - group of two-position two-way solenoid valves with servo drive with threaded connection from 1/4" to 1".
This group is intended in particular for manufacturers of serial equipment requiring durability at moderate flow rates.
· Two-position two-way
· With servo drive
· DN 6 - 22
Valve body made of brass or brass resistant to selective corrosion
NC (normally closed) and NO (normally open) options
· Threaded connection in accordance with ISO 228/1 or with NPT thread (EVSI and EVSI-U)
![]() EV220B (6-22 series) Servo-operated 2/2-way solenoid valves |
![]() Solenoid valve EV220B 6-22 BYcoil - BY240CS |
![]() Solenoid valve EV220B- 10B G 12E |
![]() Solenoid valve EV220B NO - GP208/240J |
![]() Solenoid valve EV220B 6-22 10B |
![]() Solenoid valve EV220B -22 NC NPT |
Solenoid valve EV220B - 12B G 12N |
![]() Solenoid valve EV220B 6-10 NO |
Order code |
Compound |
Hole size |
Exploitation |
Mat. seals |
Pressure drop [bar] |
Mat. housing |
Kv m3/h |
Coil voltage |
||
Normally closed |
Servo |
- | ||||||||
- | ||||||||||
Normally open |
- | |||||||||
- | ||||||||||
Normally closed |
- | |||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
Normally open |
- | |||||||||
Normally closed |
- | |||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
Brass, resistant to selective corrosion |
- | |||||||||
- |
EV220B (15-50 series) Servo-operated 2/2-way solenoid valves
EV220B 15-50 is a group of universal on-off, two-way, indirect-acting solenoid valves with servo drive.
The valve body, made from regular brass, selective corrosion resistant brass or stainless steel, allows for a wide range of applications.
The integrated control loop filter, adjustable closing time and protection class up to IP67 ensure optimal performance even in critical conditions.
· Two-position two-way
· With servo drive
· DN 15 - DN 50
· Valve body available in brass, selective corrosion resistant brass
· NC and NO options
Threaded connection according to ISO 228/1 or NPT (EVSI and EVSI-U)
With protection against water hammer
· Available with adjustable closing time
Technical Specifications of EV-220B Solenoid Valves
Order code |
Compound |
Hole size |
Exploitation |
Mat. seals |
Pressure drop [bar] |
Mat. housing |
Kv m3/h |
Coil voltage |
||
Normally closed |
Servo |
|||||||||
230 V AC current |
||||||||||
230 V AC current |
||||||||||
230 V AC current |
||||||||||
230 V AC current |
||||||||||
230 V AC current |
||||||||||
230 V AC current |
||||||||||
Brass, resistant to selective corrosion |
- | |||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
Normally open |
- | |||||||||
- | ||||||||||
Normally closed |
- | |||||||||
- | ||||||||||
Normally open |
- | |||||||||
- | ||||||||||
Normally closed |
- | |||||||||
- | ||||||||||
Normally open |
- | |||||||||
- | ||||||||||
Normally closed |
- | |||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
Normally open |
- | |||||||||
- | ||||||||||
Normally closed |
- | |||||||||
- | ||||||||||
Normally open |
- | |||||||||
- | ||||||||||
Normally closed |
- | |||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
Normally open |
Stainless steel |
- | ||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
Normally closed |
- | |||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- |
EV220B (65-100 series) Servo-operated 2/2-way solenoid valves
EV220B 65-100 is a group of two-position, two-way solenoid valves designed for use in high-power applications. industrial installations with high flow rates. Features of this valve are a cast iron body and a flange connection.
The water hammer-proof design and built-in control circuit filter ensure reliable operation over a long period.
· Two-position two-way
· With servo drive
· DN 65 - 100
Valve body made of cast iron
Flange connection
· Operating pressure up to 10 bar
· Max. working environment temperature: 90° C
Technical Specifications of EV-220B Solenoid Valves
Order code |
Compound |
Hole size |
Exploitation |
Mat. seals |
Pressure drop [bar] |
Mat. housing |
Kv m3/h |
||
Normally closed |
2 1/2" weld flange |
Servo |
|||||||
Welding flange 3" |
|||||||||
2 1/2" weld flange |
|||||||||
Welding flange 3" |
|||||||||
Welding flange 3" |
EV222B Servo-operated 2/2-way solenoid valves with isolating diaphragm
EV222B is a group of servo-actuated indirect-acting solenoid valves designed for use with contaminated or corrosive media.
The valve body made of stainless steel, an insulating membrane that protects the electromagnetic system from contamination, a built-in control circuit filter, adjustable closing time, and a protection class of up to IP67 ensure reliable and successful operation.
· Two-position two-way
· With servo drive
· insulating membrane
· DN 15 - DN 50
· Normally closed version only
Technical Specifications of EV-222B Solenoid Valves
EV224B Servo-operated 2/2-way solenoid valves for high pressure
EV224B - two position two way solenoid valve high pressure, indirect action, with servo drive, designed for use at operating pressures up to 40 bar and operating fluid temperatures up to 60 °C; Available in normally closed and normally open versions:
The standard built-in control circuit filter, adjustable closing time, and protection class up to IP67 (depending on the coil) ensure reliable and successful operation.
· For high pressure pneumatic systems (up to 40 bar);
· Two-position two-way, with servo drive
· DN 15 - 20
· NC and NO options
Brass valve body
Built-in filter to protect the pilot system
Based on proven EV220B technology
Technical Specifications of EV-224B Solenoid Valves
Order code |
Compound |
Hole size |
Exploitation |
Mat. seals |
Pressure drop [bar] |
Mat. housing |
Kv m3/h |
||
Normally closed |
Servo |
||||||||
Normally open |
|||||||||
Normally closed |
|||||||||
Normally open |
|||||||||
Normally closed |
The EV250B positive lift valve can operate from zero to 10 bar pressure differential. This group of on-off, two-way valves is designed primarily for use in closed circuits with low pressure drops and medium flow rates. Valve body made of selective corrosion resistant brass ensures long service life even in aggressive steam environments.
The EV250B valve is compatible with a wide range of Danfoss coils with protection classes from IP00 to IP67. Working medium temperatures up to 140 °C (low pressure steam).
· Two-position two-way
· control with forced lifting
· DN 10 - DN 22
NC (normally closed) and NO (normally open)
From zero pressure drop
· Particularly suitable for closed circuits as well as tank drain systems
Optionally available with WRAS, VA and UL approvals
· threaded connections in accordance with ISO or standard pipe thread
![]() EV250B Assisted lift operated 2/2-way solenoid valves |
![]() Assisted lidt operated solenoid valves, type EV250B NO (normally open) |
![]() Assisted lift operated solenoid valves, type EV250B NO 3/8 with coil |
![]() Assisted lift operated solenoid valves, type EV250B NO 3/4 with coil |
Assisted lift operated solenoid valves, type EV250B NC with coil |
![]() Assisted lift operated solenoid valves, type EV250B NC |
Assisted lift operated solenoid valves, type EV250B NO |
Technical Specifications of EV-250B Solenoid Valves
Order code |
Compound |
Hole size |
Exploitation |
Mat. seals |
Pressure drop [bar] |
Mat. housing |
Kv m3/h |
Coil voltage |
||
Normally closed |
Forced lift |
Brass, resistant to selective corrosion |
230 V AC current |
|||||||
230 V AC current |
||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
- | ||||||||||
Normally open |
- | |||||||||
- | ||||||||||
- |
EV260B Servo-operated 2-way proportional solenoid valves
EV260B is a group of proportional (with a smooth characteristic) two-way solenoid valves with a servo drive, with threaded connections from 1/4" to 3/4".
By continuously adjusting the coil current, the armature can be moved to any position in the anchor tube, and the valve can be moved to any state, from fully closed to fully open.
When the coil current reaches its maximum value, the valve is fully open.
· Proportional (with smooth characteristic)
· For smooth flow control
· Two-way
· With servo drive
· DN 6 - 20
· Small time constant
· Linear characteristic throughout the entire control range
Closes in case of power failure (fail-safe)
Coil protection class IP67
Supply voltage 24 V DC
Technical Specifications of EV-260B Solenoid Valves
EV310B is a large group of direct acting three position two way solenoid valves for universal use.
EV310B is a series of highly durable, high performance valves that can be used in any type of harsh operating environment.
· Three-position two-way
· Direct action
· DN 1.5 - DN 3.5
Brass valve body
Threaded (G 1/8" to G 3/8") or flanged (32x32 mm) connections
· NC (normally closed) and NO (normally open) options
· Options with manual control bypassing automation
![]() EV310B Direct-operated 3/2-way solenoid valves |
![]() EV310B-without-coil |
Technical Specifications of EV-310B Solenoid Valves
Order code |
Compound |
Hole size |
Exploitation |
Mat. seals |
Pressure drop [bar] |
Mat. housing |
Kv m3/h |
||
Normally closed |
Direct action |
||||||||
Flange 32 mm |
|||||||||
Normally open |
The EV215B is a direct acting, 2 position, 2 way solenoid valve designed for use in steam applications.
The design is based on the usual Danfoss concept for direct acting valves with improved performance, but the valve disc is made of fluoroplastic, which ensures reliable operation even with dirty steam.
The valve body, made of stainless steel, ensures long service life even in aggressive steam environments.
· Two-position two-way
· Direct action
· DN 3
G 1/4"
Stainless steel valve body
· NZ option only
Threaded connection according to ISO 228/1 or NPT (EVSIS 3)
![]() EV215B Direct-operated 2/2-way solenoid valves for steam |
![]() Solenoid valve EV215B SS without coil |
![]() Solenoid valve EV215B NC NPT |
Technical Specifications of EV-215B Solenoid Valves
EV225B Servo-operated 2/2-way solenoid valves for steam
The EV225B is a two-position, two-way, servo-actuated solenoid valve designed for use in steam applications.
Its design is based on the use of a fluoroplastic membrane, which ensures reliable operation even when working with contaminated steam.
Valve body made of selective corrosion resistant brass and valve seats made of stainless steel ensure long service life even in aggressive steam environments.
· Two-position two-way
· Specially designed for steam installations
· With servo drive
· DN 6 - DN 25
· From G 1/4" to G 1"
Valve body made of brass, resistant to selective corrosion
NC (normally closed)
ISO 228/1 or UL listed option with NPT thread (EVSIS)
Technical Specifications of EV-225B Solenoid Valves
Order code |
Compound |
Hole size |
Exploitation |
Mat. seals |
Pressure drop [bar] |
Mat. housing |
Kv m3/h |
Coil voltage |
||
Normally closed |
Servo |
fluoroplastic |
Brass, resistant to selective corrosion |
230 V AC |
||||||
230 V AC |
||||||||||
230 V AC |
||||||||||
230 V AC |
||||||||||
230 V AC |
||||||||||
230 V AC |
||||||||||
Solenoid valves provide the easiest way to control and regulate the flow of liquid and gaseous media. Solenoid valves are the ideal solution for applications with limited impurities and a wide flow range from low to high flow rates.
The snap-on coil mounting system makes valve installation simple and secure. If necessary, an airtight seal can be ordered to protect against moisture penetration.
A wide range of coils with degrees of protection from IP00 to IP67 ensures optimal technical solution For various areas applications.
Controlled damping during the final closing stage, optimized shape of the diaphragm and equalizing hole reduce the magnitude of the water hammer in all Danfoss valves by up to 1.5 bar (according to EN 60730-2-8, test pressure 6 bar).
The service life of the valve is significantly increased due to the special shape of the membrane, which helps reduce the level of internal stress in the rubber. In addition, this special shape diaphragm provides optimal flow characteristics.
The coaxial filter protecting the valve control unit has a self-cleaning function. The leveling hole is easily cleared of dirt in case of blockage.
In our company you can buy Danfoss solenoid valves (valves) from Denmark. Danfoss has factories all over the world, including in Russia, so delivery to the end consumer occurs in the shortest possible time. Issues of valve quality are addressed increased attention. Certification of solenoid valves according to European standards makes their operation reliable throughout their entire service life. Thanks to special alloying additives and the latest materials The valve body is highly resistant to corrosion. The installation of explosion-proof and intrinsically safe solenoid coils on solenoid valves (valves) makes their use safe for refrigerants, oils, fuels or gas. Danfoss fuel and water solenoid valves can use special solenoid coils with different levels of protection and minimal energy consumption.
Manufactured by Danfoss (Denmark)
The product is certified. 1 year warranty
Danfoss solenoid valve catalog - download >>
For water, air, oil;
Body: brass; Membrane: NBR, EPDM on request;
Operating temperature: −10… +90 о С;
vendor code | DN, | Thread, inches | Kv, m 3 / h | ∆ Pmin , | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Valve (valve) electromagnetic solenoid EV250BSpanish “NC” - closed, in the absence of current; Spanish "BUT" on request;
|
The solenoid valve, with its unusual name, evokes different associations in the average person. In fact, this is an ordinary shut-off valve, only improved, instead of opening it manually, it turns on automatically through a timer or when a switch connected to it is pressed. Why is it still solenoid?
An electromagnetic (solenoid) valve is an electromechanical device that serves to open and close the flow of the medium required for operation - liquid or gaseous. It is constructed of two components: a solenoid (electromagnet) with an iron core and an ordinary valve with a hole for the flow of liquid or gas, and a part in the form of a disk or piston to stop the flow. When power is applied to the coil, the core, under the influence of the resulting magnetic field is drawn inward, and the system opens or closes.
Based on structural characteristics, they are divided into normally open or closed. It depends on how the current is supplied to the coil. It is interesting that a normally open valve, if current is applied to it, closes, and a normally closed valve, on the contrary, opens.
One of the manufacturers of such fittings is Danfoss. The solenoid valve of the Danish concern is successfully used by many enterprises; they serve in a wide variety of industries.
The scope of their application is very diverse. The Danfoss direct acting valve has no big sizes, which makes its use popular in a variety of industries. They are, for example, installed in liquid and suction lines, and equipped with hot gas pipelines containing fluorinated refrigerants.
The Danfoss control valve is used in heat supply, heating and cooling pipelines. It can limit the flow of the working medium, blocking the passage of liquid when it approaches the flow level mark; the installed control diaphragm maintains the designated pressure drop.
The material from which the housing is made is selected based on the industrial environment in which it will be used - aggressive or neutral. Due to special alloying additives to the body materials, it has high corrosion resistance. Solenoid coils are manufactured to be explosion-proof and spark-proof, making them safe for refrigerants and oils, various fuels or gas.
Therefore, the Danfoss solenoid valve found wide application in domestic heat and water supply systems, as well as in centralized air conditioning networks. This is due to the fact that, having a reasonable price, they are akin to others, and are significantly ahead of them in quality and strength.
The Danfoss solenoid valve is universal and solves almost any task for controlling the flow of liquid and gas. Its operation does not depend on the pressure drop in the system, having a seal that is reliable when working with water, air and oil. The mechanism has high level opening even at zero pressure drop.
The Danfoss solenoid valve provides the best damping of water hammer among existing competitors. This leads to reduced noise and vibration, and also extends the life of other parts - which ensures system reliability. Its advantage is the combination of price and quality.
This article covers only the main aspects of these Danfoss products. You can find out the full characteristics and necessary technical information by contacting our company that sells these products, which are certified according to European standards. Therefore, the operation of these solenoid valves is reliable over a long service life.
Represents one of the leading leaders in the manufacture of solenoid valves. The entire range of solenoid solenoid valves from this manufacturer includes both direct-acting valves and valves with a floating membrane, that is, with a servo drive, as well as combination valves electromagnetic with forced lifting of the membrane mechanism. The differential pressure for their operation is usually in the range of 0...40 bar, and they are equipped with connections with dimensions G 1/8...4 inches.
Danfoss solenoid valves are easy perfect solution to control the flow of gaseous or liquid substances, such as air, water, glycol, steam, light oil products, etc. The valves are electromagnetic, and the principle of their operation is described on the page - “Solenoid valves”, and can be supplied to customers complete with their coil. In addition, it is possible to order the valve body and the coil for it separately from each other, with the help of which it is possible to provide the widest choice of parameters for their operation. Danfoss valves are extremely reliable and extremely convenient to use, due to the various technical innovations embodied in them.
Typically, coils and bodies and coils of such valves are supplied to customers separately, and then, at the site of their installation, they are assembled together. Their assembly itself is quite quick and simple, does not require the use of any tools, which ensures excellent flexibility of the entire structure and its rapid readiness for its activities. It is quite possible to replace the coil without draining and stopping the entire system. At a separate request from customers, Danfoss solenoid valves can also be sold to them already assembled.
One of the many types of valves is the solenoid valve. three-way valve, which makes it possible to adjust the flow of controlled liquids to mix its components into one or, conversely, to separate them into several flows, usually two or three.
Another type of such valves are shut-off valves, installed to prevent accidents on pipelines. Such mechanisms are quite capable of very quickly stopping the flow of gas, air or liquid through the serviced pipeline.