Stairs.  Entry group.  Materials.  Doors.  Locks.  Design

Stairs. Entry group. Materials. Doors. Locks. Design

» Construction nets for fencing. Construction site fencing Temporary safety fencing for construction site

Construction nets for fencing. Construction site fencing Temporary safety fencing for construction site

We offer our customers new type temporary fencing of construction sites and areas where temporary work is carried out. Our fences fully comply with the album approved by the Moscow government design solutions fencing of construction projects operating in the capital.

We produce three types of temporary fencing construction site:

TYPE 1 - Signal fencing for the construction site: 1B P; 1B N(1), (2), (3)

TYPE 2 - Safety fences for the construction site: 2А P; 2A H(1), (2); 2B P; 2B N(1), (2)

TYPE 3 - Safety and security fencing of the construction site: 3А P; 3A N; 3B P; 3B N(1), (2), (3); 3VP

Swing gates and gates 1S; 2S

Our territory fencing is equipped (at the customer’s request) with signal and LED lights, additional power supplies, and road signs.

Technical equipment and qualified workers allow us to deliver and install the fencing sections you need.

Fencing TYPE. Size/mm. Cost, rub. for m/p. Delivery/RUB in Moscow.
1 Signal 1B N 2000(2400)х2000х600
2 Signal 1B P 2000(2400)х2000х600
3 Protective 2A N 2000(2400)х2000х400
4 Protective 2A P 2000(2400)х2000х400
5 Protective 2B P 2000(2400)х2000х400
6 Protective and security 3A N 2000(2400)x2810
7 Protective and security 3B N 2000x2000x400
8 Protective-security 3V P 2000x2500x1200
9 Special section block. 2000(2400)х600х400
10 Swing gate 1S, 2S 1000(1200)x2000
11 Swing gates 1S, 2S 4000(4500)(5000)x2000
12 Signal lighting Autonomous 220V-12V 590



Special section block

Photo gallery

Temporary construction site fencing

In accordance with the requirements of SNiP 3.01.01-85 each building object(being constructed or repaired) must be fenced, since the work carried out on the site may be dangerous for surrounding people. Typically, such areas contain a variety of materials, large equipment and structures, the unprofessional handling of which leads to injury. To avoid this, a law was passed obliging the use of special construction site fencing, which consists of metal sections on supporting blocks. It is retained until the end of all events, and its availability is regulated by GOST number 23407-78.

Fence for enclosing the territory of construction sites: features and classification

First of all, it is necessary to determine the primary standards that inventory fencing for construction sites and sites must meet. Among them:

  • The presence of gates and drive-through gates for the free movement of vehicles and people.
  • Prefabricated/disassembled structures and commonality of parts and fasteners.
  • Regulated height:
    • 200 cm (visor and non-visor security safety fence),
    • 160 cm (protective without visor),
    • 120 cm (specific workplace).
  • The distance between sections is up to 600 cm.
  • The degree of rarefaction is no more than 100 mm.
  • Gaps in the sidewalk covering are up to 5 mm.
  • For the passage of people - at least 1.2 m.
  • The stability of the fence is at least 200 kg per square meter. cm.
  • Raising the visor - 20°.

Compliance with all points when fencing the territory of a construction site is controlled by supervisory authorities inspecting technical processes at various sites.

Types of fences

Depending on the purpose of installation, products are divided into 3 categories:

  • signal,
  • protective,
  • security.

They prefer to buy construction site fencing of the first type to clearly indicate that work is being done here. They are practically no different from ordinary fences that surround houses and industrial buildings.

Protective ones can protect against injuries, so their main element, in addition to the supporting concrete block of a special section, is the façade mesh. It prevents tools, debris, etc. from falling from construction scales.

Signal signs serve to visually delineate the site and warn of dangers. They have similar tasks to anti-ram barriers with a chain stretched between them.

From a design point of view, there are:

  • rack-mounted,
  • panel (mesh, solid),
  • combined.

If the fencing of a construction site in Moscow performs a protective or security function, then it is implemented exclusively as a continuous fence. The most preferred fences are made of metal mesh installed on concrete base for temporary fencing. Their advantages include:

  1. Relatively high strength and resistance to deformation.
  2. Partial absorption of production noise.
  3. Presentable appearance (especially in the city).
  4. Operational installation.
  5. The difficulty of overcoming such an obstacle.

You can buy special-section blocks and the fences themselves separately from us. Their fastening does not cause any difficulties.

Installation of construction site fencing

Installation is similar to the construction of a classic fence. The metal fencing of the construction site is installed according to the following algorithm:

  • Preparation. Before starting work, a diagram is drawn up and the amount of material is determined based on the size of the construction area.
  • Installation of welded frames. Each unit is installed on an FBS block 2400x600x400 or other dimensions. Wickets/gates must have corner posts.
  • Fastening the guides. When working with components, welding is often used. Fixation also occurs using hardware fasteners.
  • Applying reflective paint for better visibility of the fence.

To find out the price for a foundation block 2400x600x400 and other products to calculate the final amount, visit the corresponding section or contact our managers. They will also advise on the cost of installation of structures.








The Stroytekhtsentr LLC company produces prefabricated portable fencing in accordance with GOST 23407-78. The designs are characterized by mobility, ease of installation, reliability and safety. This is an excellent solution for temporarily restricting access to a facility under construction, departmental territory, separating the flow of people at cultural events, etc.

Features of metal fencing for construction sites "ARIS" A-32

The structures are made on the basis of durable galvanized metal frame, filled with welded grating. The temporary fence is installed on universal concrete blocks, which act as a base for fencing elements. Special clamps are used to connect steel sheets. Reliability and safety finished design ensured by thoughtful consideration of every detail.
The main advantages of ARIS mobile fencing:

  • installation and dismantling of the structure is carried out using a simple hand tools, does not require special knowledge and skills;
  • the cost of temporary fencing is significantly lower than permanent fencing;
  • For the manufacture of fences, the Stroytekhtsentr company uses high-quality steel that is resistant to mechanical stress;
  • mobile fencing reliably protects passers-by from injury at a facility under construction or another dangerous area;
  • can be placed on the structure necessary information without the risk of damage to the material;
  • The service life of fences and galvanized steel reaches 10 years or more in different weather conditions.

Technical characteristics of temporary fencing for construction sites

Fence section – welded structure made of metal pipes and reinforcing mesh

Height, mm

Length, mm

Reinforcement mesh cell parameters, mm

Diameter of reinforcing mesh bar, mm

Section diameter vertical stand sections, mm

Vertical stand pipe wall thickness, mm

Section diameter of horizontal section pipes, mm

Wall thickness of horizontal pipe, mm

Coverage type

Hot galvanizing

The base of the fence is a concrete block

Height, mm

Length, mm

Width, mm

Width, mm

Length, mm

Coverage type

Hot galvanizing

Gates are welded from fencing sections. Available in two sizes

Height, mm

Width, mm

Coverage type

Hot galvanizing

The gate is a welded structure, made of fencing sections

Height, mm

Width, mm

Coverage type

Hot galvanizing

Stabilizers

Length, mm

Coverage type

Hot dip galvanized or polyester powder coating with oven polymerization

For getting additional information about temporary fencing "ARIS", call the phone number listed on the website.

Technical requirements for mobile fencing

The erection of temporary fencing at a construction site makes it possible to secure work on it and avoid accidents and injuries to people. That's why to this species fencing structures are subject to serious requirements, reflected in the established state standard.

According to the main provisions of the document, as well as the requirements of SNiP, the fence must meet certain requirements for design:

  1. The fencing of construction sites must be quickly and easily disassembled, therefore it is necessary to use standard connecting elements of the established type.
  2. Sections of the structure must be made in the shape of rectangles, without sharp corners, protrusions and traumatic elements. To fence a specific area on a construction site, a mesh with a height of 1.2 m should be used. The permissible height of the entire fence can be at least 2 m, the length of a section can be from 1.2 to 2 m.
  3. The fence should have gates for people working at the construction site and gates for the passage of vehicles involved in construction.

It is also necessary that temporary fencing of construction sites complies with operating rules. Therefore it should be:

  • Reliable and resistant to mechanical damage and atmospheric loads (wind gusts, precipitation). The load per 1 sq.m of fencing is at least 200 kg.
  • Made from materials that have a quality certificate and a long service life not exceeding 10 years.
  • Installed from the sidewalk at a distance of at least 1.5 m, which ensures safe passage for pedestrians. For greater safety, the passage should be equipped with a protective canopy and railings.

Mobile fencing for construction sites of the Aris company fully complies with the established standards. By approaching their construction responsibly, you can avoid serious consequences that pose a threat to human life or harm his health.

Any construction is associated with the risk of injury. This is why construction sites need to be fenced to reduce this likelihood. Let's figure out together what the law requires, what temporary fencing for a construction site can be, and what they can be made of.

SNiP 3.01.01-85, GOST 23407-78, SNiP 12-03-2001, “Rules for labor protection in construction” (Order No. 336n of the Ministry of Labor of Russia dated 01.06.2015) - all these documents regulate safety measures on construction sites, in in particular, they indicate what kind of fencing should be installed during the work. According to these rules, construction cannot begin before the fence is erected, otherwise you will face a fine.

We are sure that you yourself do not want strangers walking around your construction site, children playing, or intruders trying to remove materials that have already been delivered. Therefore, a fence becomes a necessity.

All temporary fencing of construction sites are divided into three types:

  1. Signal. They clearly show that this is where the dangerous construction zone begins. These could simply be special warning tapes, similar to those used by police. Or light plastic nets in bright colors - orange or red. The main thing is to select a construction site and indicate the territory into which you cannot enter.
  2. Security. Such fences are designed to close the construction site from outsiders and prevent them from entering there. Security fences are often similar to permanent structures and can last for decades, even after construction has ended.
  3. Protective. Their purpose is to protect people from injury. Very often, safety fences are built in the form of a high fence with a canopy that helps prevent building materials from falling on the heads of passers-by. In addition, facade mesh is also used as a means to prevent heavy objects from falling from the height of a house under construction.

By constructive solution Temporary fencing is divided into post-mounted, panel-mounted and panel-post-mounted. Panel fencing can be sparse or continuous.

Important! Security fences can only be solid!

According to their design, fences are divided into:

  1. Simple, without additional elements. That is, just a fence, continuous or sparse.
  2. With additional elements. For example, canopies over a gate, gate, sidewalk, if it is located next to the site. Additional elements can also include railings, struts, temporary sidewalks - paths made of boardwalk. It is clear that the second type of construction site fencing will be significantly more expensive than the first.

You can build temporary fencing for a construction site using the most different materials:

  • Mesh fabric.
  • Special warning tape.
  • Wood, for example, old boards.
  • Slate.
  • Metal profile.
  • Steel sheets.
  • Plastic.
  • Metal concrete.

If we talk about the most popular options, then metal concrete is used most often in the construction of large objects, because the installation of such a heavy, permanent fence itself is already an expensive pleasure. Ordinary site owners who have started construction often use wood, corrugated sheets, and lightweight plastic sections.

If necessary, you can rent temporary fencing, which will be quickly installed on site, and after the work is completed, it will be sent to a new construction site. This inexpensive option, especially if the company offers rental along with installation and subsequent dismantling. The disadvantage of this method is that sometimes it is difficult to say how long the construction will last, that is, the fencing lease agreement will have to be extended and you will have to pay extra for it.

Important! Temporary fencing can be supplemented with lighting placed on posts and special signs warning of danger.

The legislation puts forward the following requirements for temporary fencing of construction sites:

  • It is mandatory to have gates for special equipment and gates for people.
  • The height of protective and security structures must be at least 2 meters, protective fences without canopies - 1.6 meters, with canopies - also 2 meters. The height of the fencing for the entire work area is at least 1.2 meters.
  • Canopies must be installed if the construction site is adjacent to a place of heavy human traffic. In this case, the angle of elevation of the visor towards the road must be at least 20 degrees.

Important! The canopy must be reliable enough to withstand snow loads.

  • In the case of constructing a temporary sidewalk for passage, the gaps in it should not exceed 5 millimeters. The width of the sidewalk is at least 1.2 meters.
  • Rectangular fencing panels should be 1.2, 1.6 or 2 meters long.
  • The fence must be strong enough and safe, without snags or sharp corners.

The cost of the simplest mesh temporary fencing installed on concrete blocks will be about 1500-2500 rubles, depending on the height (standard length is two meters) and availability protective coating in the form of paint. Renting one such section will cost about 10-30 rubles per day.

Video on the topic

Temporary construction fencing.

Designed for rapid fencing of work sites or other situations where a prefabricated temporary fence is required. The design allows you to organize a fence of any shape in plan, in areas with a variable profile. Thanks to various types The proposed supports, from removable and welded metal to concrete, can be obtained in varying degrees of stability. For example, when fencing a well, when it is enough to place 3 sections in a “triangle”, you can do without supports at all, using cap connecting rings on top. On the other hand, when operating a fence near a moving stream of cars during road work, increased stability is required, since a fence placed in a straight line is less stable, and the wind influence of cars is also strong. In this situation, you can increase stability by using heavy concrete supports such as Block-10 or 25. These supports have several holes, including at the edge of the block, thus, when moving along the fence, you will not trip over the supports.

Advantages of our construction fencing:

  • Increased strength characteristics thanks to stiffening ribs or frame.
  • 2 options for supports: metal support bases, as well as universal concrete blocks, providing reliable stability.
  • ISO branded welded mesh fencing is zinc coated, which significantly increases the service life of the products by preventing corrosion.
  • A light weight sections.
At the moment, fences are produced in 5 sizes, from 1.2 to 2 m, from rigid wire 4 mm thick. The fences have an anti-corrosion zinc coating. At the request of the customer, products can be additionally painted. Thanks to the 3-D molded mesh/frame structure, we have a rigid and lightweight design. In the version with removable legs or blocks, the sections are extremely compact and convenient to stack and transport. We store sections in stacks 3m high, holding up to 100 sections. If necessary, sections can be easily moved with a forklift.
And most importantly, our inventory construction fencing is always available in stock.

Options for using construction fencing:

  • construction site fencing
  • division of warehouse areas
  • fencing installation work
  • commissioning fencing
  • pit fencing
  • fencing areas for cultural events
  • fencing for temporary vehicle parking
  • road work barriers

Allowed:
- local lack of zinc coating in welding areas (does not impair the anti-corrosion properties of the product, since the electrochemical effect of zinc is preserved) and other defects in accordance with GOST 9.307-89 (ISO 1461-89);
- slight change in the pitch and diameter of the bars in the meshes within the tolerances according to GOST R ISO 13920-2017 and GOST 3282-74;
- the presence of single defects in welds (pores, cracks, lack of penetration, etc.) in accordance with STO 02494680-0046-2005;
- the presence of small splashes of metal, paint chips, burrs, curvatures, local deflections, etc. on metal supports;
- the presence of light damage that occurred during transportation of the product and does not affect its performance properties.