The main area of application of TKP technoelast waterproofing is the construction of the top layer roofing. Also quite often this material is used as a protective substrate for the lower layers of the roof.
Technoelast (waterproofing lining material marked TKP) effectively protects the roofing carpet from mechanical damage and moisture penetration. It is actively used in conjunction with other polymer coatings on a bitumen basis.
The base is made of fiberglass impregnated with special modified SBS bitumen. The outer side has a protective layer of stone chips and slate in grey, blue, red or green.
We deliver Technoelast during the day and at night, it is possible different kinds car awnings (rear, side, top). For large orders we offer object discounts. We create prefabricated vehicles with different brands of TechnoNIKOL waterproofing. We successfully work with regions.
In order not to make a mistake with your choice, we suggest that you familiarize yourself with the product labeling:
Technoelast based fiberglass - this is Technoelast XPP, Technoelast Thermo XPP, used for waterproofing and roofing works on unloaded structures with a small slope, which during operation do not experience large tensile and tensile loads.
This is Technoelast TKP, Technoelast Thermo TKP, has best characteristics to break.
These are Technoelas EPP, Technoelast EKP, Technoelast Thermo EPP, Technoelast Thermo EKP, they have excellent tensile characteristics, therefore they are used in more critical areas of roofing and waterproofing. Special grades are used in accordance with the manufacturer's recommendations.
Technoelast is produced by double-sided application of a bitumen-polymer binder consisting of bitumen, SBS (styrene-butadiene-styrene) polymer modifier and mineral filler (talc, dolomite, etc.) onto fiberglass, fiberglass or polyester. Coarse-grained and fine-grained dressings and polymer films are used as a protective layer.
Technoelast is one of the most the best materials Premium class, which are produced in Russia. Different brands Technoelast is used:
Laying can be done all year round. Even at very low temperatures it does not lose its elasticity and strength; in the heat it does not stick together and does not “flow”.
TechnoNIKOL company produces Technoelasts special purpose- This is waterproofing, which is designed to solve very specific problems.
If you have any questions about roll waterproofing Technoelast - call and ask our managers, we will try to answer everything.
BUY IN ONE PLACE, SAVE ON DELIVERY, TAKE USE OF REGULAR CUSTOMER DISCOUNTS
Technoelast from TechnoNIKOL is always where large construction projects. It is produced by applying a bitumen-polymer binder composition to a base made of polyester, fiberglass or fiberglass. The material contains an SBS modifier; a coarse-grained coating is applied to the upper layers of the material.
The composition and production technology provide the following advantages of the material:
Using Technoelast for waterproofing is beneficial. On average, it is 5 times more durable than other analogues. This guarantees the possibility of its use for waterproofing underground tanks, main systems, basement structures, etc.
You can buy Technoelast from the Ant-Snab online store. We offer various grades of material: EKP, EPP, TKP, HPP. All products have certificates of conformity and quality certificates. Valid profitable offer when purchasing large quantities (in bulk).
To place an order, take 5 simple steps:
Technoelast TKP slate gray is a waterproofing roofing material Premium class with excellent performance characteristics. It is a canvas with a base made of reinforced fiberglass, which is coated with bitumen-polymer binder on both sides. The bitumen layer contains various additives and modifiers, which improves the properties of the material. To protect against mechanical influences, ultraviolet radiation and increasing heat resistance, a coarse-grained gray slate coating is applied to the upper side of Technoelast TKP. The lower part of the panel is protected by a polymer film with the logo of the manufacturer.
Roll roofing Technoelast TKP gray slate is produced by TechnoNIKOL. It has quality certificates and is highly reliable and durable. The material can be used as roofing and waterproofing of foundations, basements, bridge spans, swimming pools and other engineering structures. The service life is at least 25 - 30 years.
Technoelast roll waterproofing has excellent performance characteristics. Its installation can be done at any time of the year, even in winter at temperatures down to -30 °C.
Main advantages of the material:
It is worth noting that the base price of Technoelast TKP gray slate will not be very low - it is at the average level among weldable materials of its class. However, its purchase is justified due to its long service life and reduced roof operating costs. After all, the degree of wear of the material after five years of operation will be only 22%. And if you use it as the top layer of a roofing carpet, then the first leaks due to wear may appear no earlier than 18 years after installation.
The material has high tensile strength and excellent waterproofing characteristics. It is recommended to use it for the top layer soft roof on concrete foundations or durable cement-sand screeds. Slate topping on outside the roll reliably protects it from the negative influence of various factors: sun rays, precipitation, mechanical damage. It can also be used when doing repair work and for moisture protection of foundations, swimming pools, basements, tunnels and other structures with increased reliability requirements.
Technoelast is laid using the fusing method using gas burner. The canvases are laid overlapping on a previously cleaned and primed base. By the way, the logo that is applied to protective film from the bottom side - onto the layer being deposited, serves as a kind of indicator during the laying process. When exposed high temperature it changes color and shows whether the covering bitumen is sufficiently heated to ensure reliable fixation of the panels to the base.
The online store “Roofing and Insulation” offers to buy Technoelast TKP gray slate at an economically feasible and competitive price. And a flexible system of discounts will allow our customers to purchase this popular material from the TechnoNIKOL concern at an even more attractive price, without even leaving their office or home. Call, ask questions to managers or place an order directly on the website!
Designed for waterproofing buildings, structures and building structures.
Technoelast EPP is produced by double-sided application of a bitumen-polymer binder consisting of bitumen, styrene-butadiene thermoplastic elastomer and filler onto a glass or polyester base. Fine-grained powder and polymer film are used as a protective layer.
Rolls of material should be stored in a dry indoors in a vertical position in one row in height at a distance of at least 1 m from heating devices.
Transportation is carried out by all types of transport in covered vehicles in accordance with the Rules for the carriage of goods in force for this type of transport.
The packaging of the pallet with rolls is a white shrink bag.
Depending on the type of coating and area of application, Technoelast is available in two grades:
Technoelast K— with coarse-grained toppings front side and polymer film or fine-grained coating on the surface to be welded; used to install the top layer of waterproofing with protection from sunlight;
Technoelast P— with fine-grained powder or polymer film, or a combination thereof on both sides of the canvas; used for the installation of lower layers in multi-layer waterproofing of building structures (foundations, tunnels, roofs, etc.).
Technoelast is biostable.
Parameter name | P | |
Cover type: | top | film without logo |
bottom | film with logo | |
Weight, kg./sq.m. no less | 4.95 | |
Tensile strength in longitudinal/transverse direction, N, not less | on polyester | 600/400 |
Thickness, mm | 4 | |
Water absorption for 24 hours, % by weight, no more | 1 | |
Weight of binder on the welded side, kg/sq.m., not less | 2 | |
Flexibility temperature on timber R=25mm, оС, not higher | -25 | |
Waterproof at a pressure of at least 0.2 MPa for 24 hours | absolute | |
Length\width, m | 10x1 | |
Heat resistance, °C, not less | 100 |
According to the “Guidelines for the design and installation of roofs from bituminous materials roofing company"TechnoNIKOL" can be used in all climatic regions according to SNiP 23-01.
TechnoNIKOL Corporation offers modern building materials, which include roofing roll materials, bitumens, PVC membranes, waterproofing mastics, as well as thermal insulation of walls, ceilings and roofs of the house.