The Energoflex brand represents wide range materials for effective insulation engineering systems and communications from famous manufacturer- ROLS ISOMARKET company. They are also used for thermal insulation and sound insulation of air ducts of ventilation and air conditioning systems, heating pipes, water supply and sewerage systems. Energoflex polyethylene insulation has advanced technical characteristics and functionality. It allows you to significantly reduce heat losses, prevent condensation, reduce noise levels during system operation.
Insulating materials are represented by the following main product series:
The Santekhkomplekt company offers profitable purchases of Energoflex brand materials. We present all types of products of this famous brand. We only sell original materials High Quality, supplied directly from the manufacturer. Therefore, our price list presents the best prices for Energoflex products.
Thermal insulation Energoflex is modern type insulation to protect internal pipelines utility networks from exposure to low temperatures and other negative factors. Material based on foamed polyethylene is produced in the form of rolls and sheet material, self-adhesive film and slabs. To insulate engineering systems, tubes of various thicknesses and diameters are used, put on like a casing.
Energoflex insulation is used in engineering systems of water supply, heating, ventilation, sewerage and air conditioning. Maximum permissible temperature working environment in insulated systems - 100°C, minimum possible -40°C.
The structure of the thermal insulation for Energoflex pipes contains closed cells filled with air. This provides the material with high insulating properties that protect against heat loss and reduce vibration. The advantages of this type of insulator over other insulation materials ( mineral wool, polystyrene) are obvious:
Affordable price (price ranges from 10 to 250 rubles);
Waterproof and resistant to biological destroyers;
Long service life - from 25 years;
Resistance to aggressive chemicals;
Environmental friendliness and safety.
Energoflex thermal insulation in the form of tubes is used to protect internal engineering heating systems, cold and hot water supply with temperatures up to 100 degrees from freezing, overheating, corrosion and other influences. The operational advantage of this material is easy and quick installation.
Choosing the right thermal insulation for Energoflex pipes is easy: just know the diameter of the pipeline to be insulated and ask a consultant in the store to select the appropriate insulator. The thickness of the material varies in the range of 6, 9 and 12 mm, pipe diameter - 15-35 mm, 15-160 mm. The lower the temperature under operating conditions, the greater the thickness of the insulation should be.
Energoflex Super polyethylene foam tubes with a closed cell structure are ideal for heat and sound insulation of internal engineering systems. The material of the products is resistant to aggressive environments, has increased strength, moisture resistance and durability. Flexible heat-insulating tubes are easy to install, effectively reduce heat losses and structural noise, protect the surface of equipment from condensation and corrosion, and prevent freezing of the coolant within a given time. Ecologically pure material, safe to operate, does not require personal protective equipment.
|
Specifications |
|
|
Purpose |
|
|
Thermal conductivity, GOST 7076 |
|
|
from -40 to +95 |
|
|
Flammability group G1 |
|
|
Density, kg/m³ |
|
|
Silver |
|
Insulation thickness |
||||||||
|
outer Ø, mm |
outer Ø, mm |
outer Ø, mm |
||||||
Thermal insulation Energoflex Super SK in tubesEnergoflex Super SK polyethylene foam tubes with a closed cell structure are a type of Energoflex Super tubes and are distinguished by the presence of a longitudinal cut, on both sides of which an adhesive layer is pre-applied. This allows you to significantly simplify and speed up the installation of thermal insulation structures, as well as reduce glue consumption. The use of self-adhesive tubes allows even non-professional insulators to perform accurate and high-quality installation.
|
Specifications |
Thermal insulation Energoflex Super |
|
Purpose |
heating, water supply, sanitary systems |
|
Thermal conductivity, GOST 7076 |
λ20 = 0.039; λ 30 = 0.041; λ 40 = 0.043 |
|
Operating temperature range, °C |
from -40 to +95 |
|
Water vapor diffusion resistance factor, µ |
|
|
Water absorption, kg/m 2, GOST R EN 1609 |
|
|
Resistance to aggressive building materials |
Resistant to cement, concrete, gypsum, lime |
|
Toxicity and safety for environment |
Does not contain CFCs |
|
Fire characteristics, GOST 30244 |
Flammability group G1 |
|
Density, kg/m³ |
|
|
Silver |
|
Insulation is installed on the pipe |
Heat-insulating tubes 2 meters long |
||||||
|
Insulation thickness |
|||||||
|
outer Ø, mm |
outer Ø, mm |
outer Ø, mm |
|||||
Sheet heat insulating material with a closed cell structure Energoflex Super is effective solution for pipe insulation large diameter, fittings and containers for various purposes. Having all the advantages of Energoflex polyethylene foam materials - low thermal conductivity, high moisture and vapor protection, flexibility and surface strength - Energoflex Super rolls are distinguished by high energy efficiency, ease of installation, durability, sanitary and environmental safety.
|
Specifications |
Thermal insulation Energoflex Super |
|
Purpose |
heating, water supply, sanitary systems |
|
Thermal conductivity coefficient, GOST 7076 |
λ20 = 0.039; λ 30 = 0.041; λ 40 = 0.043 |
|
Operating temperature range, °C |
from -40 to +95 |
|
Water vapor diffusion resistance factor, µ |
|
|
Water absorption, kg/m 2, GOST R EN 1609 |
|
|
Resistance to aggressive building materials |
Resistant to cement, concrete, gypsum, lime |
|
Toxicity and safety for the environment |
Does not contain CFCs |
|
Fire characteristics, GOST 30244 |
Flammability group G1 |
|
Density, kg/m³ |
|
|
Silver |
|
size designation |
quantity per roll |
|||
Thermal insulation Energoflex Super Protect in tubesEnergoflex Super Protect pipes are designed specifically for insulating heating and water supply pipes laid in floor and wall structures. The insulation has increased resistance to mechanical damage and aggressive building materials. Polymer coating increases the strength of the tubes by 50%, thereby making the insulation reliable protection for pipes, and the elastic layer of polyethylene foam helps to compensate for the thermal expansion of the pipes. Progressive technology of simultaneous extrusion of polyethylene foam tube and polymer film ensures reliable welding of thermal insulation and coating.
|
Specifications |
Thermal insulation Energoflex Super |
|
Purpose |
heating, water supply, sanitary systems |
|
Thermal conductivity, GOST 7076 |
λ20 = 0.039; λ 30 = 0.041; λ 40 = 0.043 |
|
Operating temperature range, °C |
from -40 to +95 |
|
Water vapor diffusion resistance factor, µ |
|
|
Water absorption, kg/m 2, GOST R EN 1609 |
|
|
Resistance to aggressive building materials |
Resistant to cement, concrete, gypsum, lime |
|
Toxicity and safety for the environment |
Does not contain CFCs |
|
Fire characteristics, GOST 30244 |
Flammability group G1 |
|
Density, kg/m³ |
|
Insulation is installed on the pipe |
Tubes in coils of 10 meters |
||||||
|
Insulation thickness 4 mm |
|||||||
|
outer Ø, mm |
outer Ø, mm |
outer Ø, mm |
internal Ø, mm |
Color blue |
Color red |
||
|
|||||||||||||||||||||
|
Energoflex Extra contact adhesive is used to connect insulation seams |
|
|
Approximate consumption of 1 liter of glue: |
|
|
Tubes 6 mm thick |
240-300 linear m |
|
Tubes 9 mm thick |
160-200 linear m |
|
Tubes 13 mm thick |
110-140 linear m |
|
Tubes 20 mm thick |
70-90 linear m |
|
Rolls and plates |
|
|
Package: |
Metal cans with a volume of 0.45 l, 0.9 l, 2.8 l |
|
Storage temperature: |
From + 10 to + 40°С |
|
Application temperature: |
From + 10 to + 40°С |
Thermal insulation of water supply pipes, heating systems designed to protect pipelines from adverse external influences, extending their service life, improving the quality of operation and energy efficiency by reducing heat loss. Today, the market for thermal insulation materials is represented by dozens of brands. Thermal insulation of heating pipes and other engineering systems is made of various materials and is available in different names.
The assortment of the Teremonline online store includes high-quality thermal insulation materials for engineering systems produced in Russia.
ROLS ISOMARKET is the largest Russian manufacturer technical thermal insulation– presents its products under trademarks Energoflex, Energofloor, Energopack. Energoflex is a thermal insulation material based on foamed polyethylene, which is characterized by a closed cellular structure. Area of application: thermal insulation of water supply and heating pipes, ventilation and air conditioning systems, sanitary systems, as well as enclosing structures in industrial and engineering systems.
Main tasks solved with Energoflex:
Thermal insulation material under the Energoflex brand is produced in two lines - Energoflex Super and Energoflex Black Star. Thermal insulation "Energoflex Super" is manufactured in the form of sheets and tubes. Energoflex Super provides effective heat, steam and noise insulation. This is an environmentally friendly material, safe and easy to install, which is resistant to aggressive environments, moisture resistance, increased strength, and durability. When using Energoflex Super inside buildings and structures, no vapor barrier or cover layers are required.
Energoflex tubes are designed for insulation of steel, copper and plastic pipes. Energoflex Super SK tubes are self-adhesive tubes that make the installation of thermal insulation structures even easier.
Energoflex Super Protect material in coils is specially designed for insulating pipes laid in walls and floors, based on the advanced technology of simultaneous extrusion of polyethylene foam and polymer film, providing increased resistance to mechanical damage and aggressive materials used in construction. The tubes have color differentiation for cold and hot pipelines.
Energoflex Super sheet material, produced in the form of rolls, uncoated and coated with aluminum foil, is recommended for use as the second and subsequent layers when designing multi-layer thermal insulation structures for pipelines.
The price for thermal insulation for Energoflex pipes is higher compared to some thermal insulation materials, however, you will feel the savings after only 3 months of operation, while cheap thermal insulation allows for large heat losses.
The ROLS ISOMARKET thermal insulation presented in our online store is Energoflex Super and Energoflex Super SK tubes made of polyethylene foam. The tubes are presented in the following standard sizes: length – 1m and 2m, DN – from 8 to 50 mm, layer thickness – 6 mm, 9 mm, 13 mm, 20 mm. Energoflex Super SK tubes have a longitudinal cut with an adhesive layer on both sides, which allows for quick, accurate and high-quality installation.
Buy thermal insulation for pipes in Moscow and the Moscow region from the Terem company you can order from a warehouse or to order.
Energy-saving technologies have become the guiding star of the 21st century. People learn not just to spend uncontrollably Natural resources planets, and use them wisely. Various insulation materials and insulation schemes are used both in industry and in household level. Thermal insulation of equipment and various units is a technological necessity. Pipeline insulation is laid to maintain the temperature of the coolant - be it superheated steam or coolants.
Insulating material is used to maintain the required coolant temperature. It is used for thermal insulation:
For thermal insulation of pipelines they use various materials: stone wool, polyurethane foam, polystyrene foam, penoizol, polyethylene foam. Due to ease of installation and affordability, the latter, in turn, occupies up to 90% of the market in household use.
The ROLS ISOMARKET company produces thermal insulation under several brands: Energoflex® (ENERGOFLEX), Energofloor® (Energoflor), Energopack® (Energopack). The company's plant is equipped with equipment from KraussMaffei Berstorff GmbH, one of the leading manufacturers of extrusion equipment for polymers.
Thermal insulation is available in the form of flexible tubes, mats and sheets.
The material has great elasticity and high resistance to aggressive environments. Implements additional protection metal pipes from corrosion, protects pipelines during installation and operation.
The company produces more than a hundred standard sizes of insulating pipes and about two dozen standard sizes of sheet and roll material. A system of proprietary accessories has also been developed for ease of installation.
In September 2000, the first Russian production plant was launched technological insulation made of foamed polyethylene. Production is a joint project between STROYCOM and the Plant information technologies LIT. The company's products have received the necessary quality certificates from the Russian State Committee for Construction and Construction and international ISO quality certificates. The brands produced have excellent performance properties that are not inferior to foreign analogues and meet fire and hygienic safety requirements. Thermal insulation material is made from polyethylene high pressure(PVD). The structure of the material has a closed cellular structure, which makes the material an excellent heat insulator. The material has low thermal conductivity and good resistance to moisture penetration, effectively reduces structural noise, and is not susceptible to rotting. When working with it there is no need to use personal protective equipment. Widely used for insulating heating systems, ventilation systems, water supply and air conditioning systems. He is a shining example good quality for a reasonable price.
Technical characteristics of thermal insulation depend on the type of insulating material. Let's look at each in detail.
ENERGOFLEX pipe insulation is available in three colors: grey, red and blue, for easy identification of pipelines during installation. The thermal conductivity of insulation and lambda at an ambient temperature of +20°C is 0.036 W/m°C. Thermal insulation owns wide range operating coolant temperatures from -40°C to +100°C. Fire characteristics meet GOST 30244-94 “Building materials. Combustibility test methods" Belongs to the group of flammable materials G1.
ENERGOFLEX is an environmentally friendly and safe material, does not contain chlorofluorocarbons and freon. The density of the material is 25kg/m3±5kg.
Rolled insulating material is available in thicknesses of 3-20mm. Thermal conductivity l - 0.036-0.038 W/m°C. Material density 20÷30kg. The adhesion of the adhesive layer to the metal surface is at least 300 g/cm2. Belongs to flammability group G1. Temperature operation of thermal insulation is -40+80°C.
The modulus of elasticity under a load of up to 2 kPa is 0.39 MPa, and under a load of 5 kPa - 0.77 MPa. Tensile strength in the longitudinal direction is 0.2 MPa, in the transverse direction - 0.1 MPa.
The relative compression under a load of up to 2 kPa is - 0.09 MPa, and at a load of 5 kPa - 0.2 MPa.
The water absorption of the material by volume is no more than 2%. ENERGOFLEX is also a good sound insulator. Percentage of noise absorption at frequencies 200-1250 Hz. is 25-55%, at frequencies 1600-3600Hz - 30-60%.
Thermal insulation is intended for use outdoors and indoors at ambient temperatures from -40°C to +70°C and relative humidity up to 100%. The manufacturer does not recommend using thermal insulation under direct lines. sun rays. When working with insulation, use only high-quality materials, accessories, fixtures and tools.
The surface of the thermal insulation must be continuous, rough, without depressions, dents or holes. If there is contamination on the thermal insulation, it must be removed with a cleaner before installation.
The surface of the pipelines must be free of dirt, oil stains and rust. Clean contaminated surfaces with ENERGOFLEX cleaner or other cleaning agent. When installing thermal insulation on air ducts of ventilation and air conditioning systems, they must first be coated with an anti-corrosion coating. When installing thermal insulation in two or more layers, the installation must be done with the seam offset.
Thermal insulation of pipelines and equipment should be carried out in a disconnected state. You can continue operating the system no earlier than 24 hours after installation.
When thermally insulating pipes outdoors, it is necessary to choose insulation with a coating material in accordance with SNiP 2.04.14-88.
During installation, it is prohibited to stretch the thermal insulation in the longitudinal or transverse direction. It is recommended to squeeze it slightly.
To install thermal insulation you will need special tools and accessories
Before application adhesive composition ENERGOFLEX must be mixed thoroughly. It is recommended to use glue in 0.5 liter containers. The glue is applied in a thin layer to both surfaces to be glued. Connect the surfaces five minutes after applying the glue. If the glue on the surface has dried, it is reapplied. The use of glue is recommended at an ambient temperature of at least +17°C, optimally - +20°C. If the glue has thickened, it can be diluted with ENERGOFLEX solvent.
When installing thermal insulation pipes, various work methods are used.
If pipes need to be welded, the thermal insulation must be shifted from the welding site by 250-300mm and welding must be carried out. Glue the ends of the thermal insulation.
Longitudinal cutting method. Thermal insulation is mounted on already installed systems pipelines. The thermal insulation tube must be cut with a knife with a short blade along the axis and mounted on the pipeline. Glue the cut and further strengthen it with a clamp, glue the ends of the tubes together.
Installation of rolls. Thermal insulation of pipes with a diameter of over 160 mm is carried out roll material. This installation method is also used for installing several layers of thermal insulation. To do this, measure the required circumference, cut off the required length and width from the roll, and install it.
Wedge cutting method. Use this method necessary for pipelines with a diameter of up to 90 mm. Insulate the tube using a miter box with inside cut wedges at an angle of 22° or 45°, depending on the angle of rotation. The distance between adjacent wedges is 5-10 mm. All cuts are glued and secured with a clamp.
Angle cutting. The method is used to obtain right angles of rotation. Subsequent operations are similar to the previous methods.
Diameter marking.
To do this, two half-sectors ABCD are cut out, which are glued along line L, the thermal insulation is installed on the pipe and glued internal corner. The remains are cut perpendicular to the pipe.
From the wide variety of pipeline insulating materials, you can easily choose the one that you need in this particular case. The use of thermal insulation will save money and maintain required temperature coolant or prevent liquids in the pipeline from freezing, and prevent the appearance of condensation.
