Manufacturer: Russia.
Description: UZO-10-01 consists of an ultrasound generator connected via a cable to an emitter located on the lid of commercially produced containers for disinfection of EDPO, and a metal reflector plate. The installation also includes a body and a tray borrowed from EDPO. Thus, the interchangeability of cases and pallets is ensured, which eliminates the contact of the operator’s hands with the tool when loading (transferring) it into the installation after disinfection in a similar EDPO container. An unbroken chain of instrument preparation for sterilization is ensured - placing a metal reflector plate on the bottom of the tray and loading the instrument into the tray; placing the tray with the tool in a container with a disinfectant; disinfection for a specified time; removing the tray and washing it in running water; placing the pallet in another (from the installation kit) container with detergent; installation of the cover with the emitter; ultrasonic cleaning; removing the tray with the cleaned instrument and rinsing it in running water. If the disinfectant has cleaning properties, the disinfection process is combined with PSO. Note: in case of a large processing flow and the availability of EDPO of corresponding volumes, the plant provides for the supply of additional reflectors to medical facilities necessary to ensure a continuous process of pre-sterilization cleaning. Ultrasonic cleaning is the most effective method cleaning items of complex configuration made from various materials(metal, glass, plastic). In this case, the item to be washed is placed in a washing solution, and cleaning occurs due to the influence of ultrasound.
Purpose: ultrasonic unit (wash) UZO 10-01 “Medel” is designed for pre-sterilization cleaning of instruments and medical products, especially small ones, complex configurations, piercing and cutting materials various contaminants in the form of solid and liquid films from oils and fats of vegetable, mineral (new instruments) and animal origin; solid precipitation - dust, bone tissue etc.; water-soluble and partially soluble polar organic and inorganic compounds- sugar, blood, protein, etc.; corrosion products.
Specifications: working volume of the bath is 10 liters. Dimensions of the processing area are 320x245x100 mm. The solution is drained from the bath by gravity using a drain tube.
Types of indication:
Availability of power supply from the network;
Processing mode;
The presence or absence of contact of the emitting plate with the solution;
Set and remaining processing time.
Consumed electric power- no more than 200 VA.
Weight no more than 9.7 kg
Today, when we are in the 21st century - the century of electronics and high technology, in many Russian medical institutions, contaminated medical instruments (surgical, gynecological, etc.) are cleaned by staff manually, after which they are disinfected and sterilized. When manually washing piercing and cutting tool possible injury to the hands of medical staff with subsequent infection by nosocomial infection.
Ultrasonic washers RCD
Dimensions of the processing zone of the ultrasonic cleaner UZO10-01: 320x245x100 mm. The solution is drained from the bath by gravity using a drain tube.
To avoid infection, instruments are first disinfected and then treated manually with ruffs, brushes, and cotton-gauze swabs. But here, too, there are pitfalls: many disinfectant solutions have a fixing effect, making it even more difficult to clean the instruments. As a result, the labor intensity of manual cleaning increases many times over. Most of these problems are eliminated with the introduction of ultrasonic machines into the pre-sterilization cleaning process, namely MEDEL ULTRASONIC WASHERS.
Ultrasonic cleaning is the most effective method of washing complex objects made of various materials (metal, glass, plastic). In this case, the item to be washed is placed in a washing solution, and cleaning occurs due to the influence of ultrasound. The main phenomena that ensure effective cleaning are acoustic flows of solution and cavitation.
Intensification of disinfection measures through the use of ultrasonic cleaning of RCDs:
The instrument, which has undergone a disinfection cycle in an EDPO container with a reflector plate pre-laid on the bottom of the tray, is washed under running water directly in the pallet and fits into the case in it working bath RCD for pre-sterilization cleaning.
After installing the cover with the emitter, the timer sets the time required for cleaning. The set and current time are recorded on a digital display.
Vibrations generated by an ultrasonic emitter cause vibrations in a liquid medium. elastic waves and pulsating air bubbles invisible to the eye. This creates a hydrodynamic effect on the treated surfaces, as a result of which contaminants are removed from them into the solution.
After ultrasonic cleaning, the instrument is washed again with running water and only then removed from the tray for drying and sterilization.
Cleaning quality corresponding SES requirements, is ensured by operating modes and compliance with the requirements described in the accompanying documentation.
Unlike traditional washers, which are “forced” to operate at high power levels, ultrasonic RCD washers operate to provide the same cleaning efficiency at 2-3 times lower powers.
In the ultrasonic cleaner UZO 10-01, aimed at use in dental offices, the ultrasonic emitter is as close as possible to the reflector, forming a zone of increased intensity of ultrasonic vibrations directly below it. The intensity of vibrations in this zone is sufficient to remove powdery contaminants from tooth enamel and fillings from hard-to-reach areas of small dental instruments (for example, from bur grooves, wound working areas of dental drills), thereby facilitating further work machining tools, since ultrasonic-treated contaminants can be easily removed using a brush or under running water.
And here it is IMPORTANT to emphasize three points:
The organization of ultrasonic RCD washers on the basis of EDPO polymer containers and the constructive arrangement of the ultrasound source in the lid provides another number of obvious advantages them in front of their analogues:
Description:
Ultrasonic cleaner UZO 10-01 MEDEL is designed for pre-sterilization cleaning of instruments and medical products from various contaminants. The working volume of the bath is 10 liters.
Dimensions of the processing area are 320x245x100 mm. The solution is drained from the bath by gravity using a drain tube.
Today, when we are in the 21st century - the century of electronics and high technology, in many Russian medical institutions, contaminated medical instruments (surgical, gynecological, etc.) are cleaned by staff manually, after which they are disinfected and sterilized. When manually washing piercing and cutting instruments, it is possible to injure the hands of medical staff with subsequent infection by a nosocomial infection.
To avoid infection, instruments are first disinfected and then treated manually with ruffs, brushes, and cotton-gauze swabs. But here, too, there are pitfalls: many disinfectant solutions have a fixing effect, making it even more difficult to clean the instruments. As a result, the labor intensity of manual cleaning increases many times over. Most of these problems are eliminated with the introduction of ultrasonic machines into the pre-sterilization cleaning process, namely ULTRASONIC WASHERS UZO "MEDEL".
Ultrasonic RCD washers are designed for pre-sterilization cleaning of instruments and medical products, especially small ones, complex configurations, piercing and cutting ones from various contaminants in the form of:
Ultrasonic cleaning is the most effective method of washing complex objects made of various materials (metal, glass, plastic). In this case, the item to be washed is placed in a washing solution, and cleaning occurs due to the influence of ultrasound. The main phenomena that ensure effective cleaning are acoustic flows of solution and cavitation.
Intensification of disinfection measures through the use of ultrasonic RCD cleaning :
Unlike traditional washers, which are “forced” to operate at high power levels, ultrasonic RCD washers operate to provide the same cleaning efficiency at 2-3 times lower powers.
And here it is IMPORTANT to emphasize three points:
The organization of ultrasonic RCD washers on the basis of EDPO polymer containers and the structural location of the ultrasound source in the lid gives them a number of obvious advantages over their analogues:
Ultrasonic RCD washers consist of:
Advantages of UZO "MEDEL":
Thereby:
Specifications:
Types of indication:
Medical ultrasonic cleaning is used for effective cleaning, pre-sterilization treatment and disinfection of objects of complex configuration made of various materials (metal, glass, plastic).
Due to the acoustic flows of the cleaning solution and cavitation, it effectively removes dirt, oil and grease films, stains, dental cement, corrosion products, etc.
Consists of an ultrasonic generator, an ultrasonic emitter, a working bath and a plastic stand.
External surfaces of the unit are resistant to disinfection chemical method any disinfectant approved for use in medical practice for products made of plastics and metals.
Advantages of medical ultrasonic cleaning from Elameda:
Equipment UZO-10-01 "MEDEL":