Fence from metal picket fence(Euro picket fence) is modern version, the usual wooden fencing, made of metal painted with polyester in various colors, including imitation wood (Printek-Printek). Affordable price both beautiful and aesthetic appearance- only a small part of its advantages. Any architectural style compatible with Euro picket fence. The main difference from other fences is that the fenced area is ventilated, partially visible, and most importantly, Sun rays gently fall on the vegetation near the fence, and temperature changes do not affect its service life.
The highest quality metal picket fence on our market is the Unix Premium Euro picket fence.
Under the tree "Printek"
| Euro picket / Fence height | 1.0m | 1.5m | 1.8m | 2.0m |
| Unix Premium one-sided | 70r | 105r | 126r | 140r |
| Unix Premium two-sided | 76r | 114r | 137 rub. | 152r |
| Unix Premium structural, matte (2 colors) | 100r | 150r | 180rub | 200rub |
| Unix Premium powder “Gloss” | 110r | 165r | 198rub | 220r |
| Unix Premium powder “Matte” | 120r | 180rub | 216 rub. | 240rub |
| Unix Printek (wood, gold and antique oak) | 130r | 195 rub. | 234rub | 260rub |
| Unix Premium Antique (copper, gold, silver) | 190rub | 285r | 342r | 380r |
| Euro picket fence Grand House “C” shaped | 75r | 113r | 135r | 150r |
| Euro picket fence "M" shaped | 70r | 105r | 126r | 140r |
| Euro picket fence "U" shaped | 70r | 105r | 126r | 140r |
| Metal frame (pillars 60x60 and 2 logs 40x20) for 1m/p | 350rub | |||
| Self-tapping screws in color for 1 piece | from 4r | |||
| Plugs for poles (plastic) for 1 piece | from 30r | |||
| Fence installation in 1m/p | from 350r | |||
On average, the price of a turnkey metal picket fence with installation is ~1,900 rubles per linear meter. Minimum order from 100,000 rubles.
The frequent choice of such a fence is determined by the fact that modern designers have developed unique models that resemble wooden ones in their qualities: environmentally friendly, visually beautiful and breathable. A large selection of colors will allow you to create a pleasant environment around your home, where every detail fits together. Advantages of fences made of Euro picket fences
Of course, this is only a small part possible application picket fence, since everything is limited by the user’s imagination.
When you decide to install a fence, you can determine for yourself whether the pickets will be on one side of the fence or on both. It is worth considering the fact that if you install picket fences in a checkerboard pattern, you can safely count on the fact that everything behind the fence will be hidden from prying eyes. When placing pickets in a single row, it is recommended to leave 20 to 60 mm between them. And when installed in a checkerboard pattern, the distance between the pickets can be from 40 to 80mm.
Since every client wants his fence and color scheme to be unique, we offer you the opportunity to choose one of the colors presented in the catalog according to the RAL table. All this can be discussed with a consultant. The lead time for painting in Rahl color to order is only 7-10 days. What colors we paint in: RAL 1014, 1015, 1018, 2004, 3005, 3011, 5002, 5005, 5021, 6002, 6005, 7004, 7005, 8017, 9003, 9005.
A garden fence made of metal picket fence fits best into the image of a relaxation corner. Simple and unpretentious in shape, it is perfect for fencing the site and for the front of the house. This example of a metal fence is still relatively rare on the market. But for the construction of euro-fences (metal pickets), there are already several options for constructing fences with great design and interesting implementation.
Beautiful hedge of a private house
The use of metal elements as the basis of the fence, support pillars or piles for fencing personal plots and dachas have been known for a long time. But a metal picket fence as the main material for spans is a relatively new and quite interesting idea.
A fence picket is a shaped metal strip with stiffening ribs and holes for fastenings.
Fencing with brick pillars
The dimensions of such strips may vary slightly depending on technical specifications manufacturer. The basis of production is galvanized rolled steel or profiled sheets with a thickness of 0.8 to 2 mm.
The length of the slats, depending on the purpose of the fence, can be from 0.25 to 2 meters.
The range of manufacturers includes the following varieties:
And this is just one of the varieties
Fences made of metal picket fences or European picket fences are just one of the types of fencing. In fact, types of metal picket fence include:
Each of the presented types of material has its own characteristics both in terms of installation and in the form of the profile of the plates, the shape of the upper part, and the method of fastening.
According to the shape of sheet steel slats, the most popular type of material among summer residents, they are:
Decorative hedge option
For those who decide to make a picket fence with their own hands, the following points will be important:
A fence made from unpainted metal plates is much cheaper than one made from polymer-coated plates.
Unpainted elements are painted:
Painting is done in two or three stages: the first is priming, the second is enamel painting, and the third is varnishing.
Possible variety of colors and patterns
Among possible types classifications of fences are worth highlighting:
Installation of a metal picket fence has several ways of attaching the slats to the fence frame. In one case, the technology involves fastening to transverse strips, just as it is fastened. In another case, you can attach a metal picket fence to the frame in special seats.
Vertical checkerboard
A metal fence for a house with a sparse arrangement of plates is installed on a slatted base of two slats - upper and lower. This installation option is universal; it can also be used under a fence, when the plates are installed in a checkerboard pattern.
The design elements taken into account are:
As a result of the calculation, initial information is obtained for entering into the online calculator:
Multi-colored option
When calculating how to make a metal fence and how much material it will take, you can take as a basis standard option, the scheme of which provides:
The fence goes well with brick pillars
The calculation will be incomplete without the fact that options for filling the spans may make adjustments to the final calculation. Types of filling may include:
The photo shows a beautiful hedge.
Recently completed fence installation
So, how to make a fence from a metal picket fence with your own hands, you need to understand in detail. Fences, gates and gates made of picket fences in a checkerboard pattern have a wider gap between the plates. This is done through the use of elements with a width of 10 or even 12 cm. In this case, the calculation and installation must be made as accurately and accurately as possible so that all distances are maintained both in the width of the gap and in the height of the installation of the plates.
A beautiful hedge option for a private home
To install a metal picket fence, you will definitely need a screwdriver with a set of bits, an electric drill with drills and a level. The presence of these tools and the ability to work with them determine the features of the installation of all elements.
How to make a fence from a metal picket fence? The best option prefabricated structure protrudes a fence made of metal picket fence on screw piles. For a more ceremonial version of the fence, it can be the construction of fences with brickwork as a base and design of pillars. For both cases, universal techniques and work methods are used, shown in the video of the installation of supports and frames.
Installation is quite quick
According to the layout of the site, a fence installation line is marked with space for the entrance gate and wicket. Further work proceeds according to plan:
Installation work
The set of spans begins with marking using the level of plate mounting points.
The first plates are installed from the edges of the span at the same distance from. The distance between them is divided by the number of slats and the equal distance of spans between them.
Another option for installation
Installation of each element is carried out after checking the distance in the upper and lower parts between the plates. Double option installed first with outside, and then with the inner one. For more details about the set of spans, watch the video.
To make a fence from a metal picket fence with your own hands, a photo of which is presented below, several operations performed after installing the spans will help:
Vertical checker board installation diagram
Fence dimensions:
The general perimeter of the planned fence
Height: 1.8 m 2.0 m
Frame coating:
Economy- metal protected by soil. The frame is assembled by welding on site. Welding areas are additionally covered with primer during installation. Standard- metal is protected with three-component metal paint. The frame is coated with metal paint and must be primed first. Welding areas are additionally coated with paint during installation. Elite- the metal is coated under workshop conditions with powder paint in a polymerization chamber, which significantly improves the protective properties of the metal. The frame is mounted using cross-shaped fasteners with bolts.
Economy standard elite
Type of profiled sheet:
Corrugated sheeting differs in metal thickness, wave height and width, can be with one-sided or double-sided coating
Picket type:
The metal picket fence is rolled on both sides, the top cut can be straight or rounded, polymer coating on one or both sides
Single sided double sided
Gap:
Clearance and design options at the request of the Customer
2 cm without gap
Installation method:
PUSHING- a hole is drilled 100mm wide and 1000mm deep. The top of the post is protected by a metal cap and the post is hammered 200mm deep to provide stability and direction. The hole is compacted with a dump of soil. BOTTING 100- the method is identical to the driving method. A hole 100mm wide is compacted with crushed stone BOTTING 200- the method is identical to the driving method. A hole 200mm wide is compacted with crushed stone Concreting- The hole is concreted with a width of 100mm; 200mm; 300mm. Depth from 1200mm to 1650mm.
Driving butting under a 100 mm hole butting under a 200 mm hole concreting
Foundation:
Strip foundation needed to prevent deformation of the fence on shifting soils, as well as as a basis for a stone, brick or modular eurofence Foundation on screw piles The reliability is not inferior to a strip foundation. It is distinguished by its quick installation and the fact that, compared to a strip foundation, a foundation on screw piles is 3 times cheaper.
Without foundation Strip 250*400 Strip 380*400 On a screw. stilts
Brick pillars:
With brick pillars, the fence is very strong, presentable and, most importantly, durable.
Gate:
ECONOMY- the frame of the gate is made of profile pipe 40*40. STANDARD- the frame of the gate is made of profile pipe 40*40 or 60*30 - outer frame and 20*20 - inner frame. The wicket filling is attached to the internal frame. ELITE- the frame of the gate is made according to individual order. The gate configuration can be welded or forged, ready product coated with powder paint in a polymerization chamber.
Without gate economy standard elite
Gates:
ECONOMY- the gate frame is made of 40*40 profile pipe. STANDARD- the gate frame is made of profile pipe 40*40 or 60*30 - outer frame and 20*20 - inner frame. The gate filling is attached to the internal frame. ELITE STANDARD- the gate frame is made of profile pipe 60*30 - outer frame and 40*20 - inner frame. The gate filling is attached to the internal frame. ELITE- the gate frame is made to order. The gate configuration can be welded or forged, and the finished product is powder coated in a polymerization chamber.Swing gates:
Sliding gates:
Without sliding swing gates
Reinforced concrete foundation on screw piles
Economy standard elite
3 m 3.5 m 4 m
Delivery from MKAD:
Distance of the object from the Moscow Ring Road
A metal picket fence is a modern alternative to its wooden counterpart. Material – galvanized steel sheets. A fence made from it can last up to 50 years.
A metal picket fence is an excellent protective structure and beautiful at the same time.
The installation of such a fence is in many ways similar to a wooden one and does not cause difficulties, and various ways fastening the planks allows you to build a unique-looking canvas.
Users often search:
To obtain the slats, steel sheets are rolled by a special press, giving them a relief. After this, strips of the same width and length are cut. The blanks are coated with a protective polymer layer and painted.
The material is called “Euro picket fence” because it is produced on European equipment in compliance with European standards.
The planks vary in shape, profile, coating, and metal thickness. Let's look at the features of each type separately.
They have a flat or figured top. With the latter, unusual, beautiful fences are obtained. In addition, the edges of the planks are rolled (bent) or not.
Photo: wood-like metal picket fence. When choosing a picket fence for a fence, it is better to give preference to rolled edges, since you cannot cut yourself on them, which simplifies installation. But such planks cost an order of magnitude more than those with raw edges.
Photo: U-shaped and M-shaped picket fence. The more stiffening ribs a metal profile strip has, the more resistant the material is to bending along its length.
Modernized versions of the picket fence have 6, 12, 16 ribs.
The standard height of the strips is from 0.5 to 3 m, width – 8–12 cm.
If you decide to install a double-sided checkerboard fence, where there are practically no gaps, then it is recommended to take material from M-shaped profile and rolled edges.
It happens from 0.4 to 1.5 mm. With increasing steel thickness, the cost of the structure and its service life increase.
For a metal picket fence optimal thickness metal - 0.5 mm for a length of up to 2 m.
The canvas has a protective zinc layer, but is also subject to painting, which can be:
Unfortunately, when purchasing external signs It is impossible to determine the quality of the powder coating, so it is better not to pay twice and immediately buy a picket fence with a polymer layer of protection.
In addition, you can paint the planks yourself. To do this you will need roof paint and a spray gun.
If you want a fence with a unique picture and texture, you will have to buy factory material.
Photo: powder coating is used as a protective material A metal picket fence imitating wood is gaining popularity. Available shades:
A good coating allows you to recognize metal only at close range.
Advantages:
Flaws:
To build the fence, it is better to hire an assistant, this way you will significantly reduce installation time.
If the design is needed for reliable protection house and will be located on the street side of the site, we recommend that you take into account that:
Now let's look at what methods of fixing a picket fence are used more often.
A generally accepted option for installing planks. No need to know to build special instructions and attach additional transverse joists to increase structural rigidity.
Each plank is fixed in a vertical position to the joists with screws or rivets. This can be done with gaps in one row or you can design a blank canvas in the form of a checkerboard fence.
Not as popular as the previous type, but if you follow the instructions, the fence will be no less attractive.
Installation of pickets horizontally much more difficult. It will be necessary to attach additional poles, which often need to be non-standard shape. If this is not done, the planks will begin to sag, which will lead to deformation of the entire structure.
And an increase in the amount of materials for construction means an increase in the total cost of the fence.
Another name is double-row. The planks are mounted to the transverse joists on both sides so that they overlap each other by at least 1 cm. To do this, the step between the stripes is made slightly smaller than their width. The fence turns out to be almost continuous and what is happening on the site is visible only from a certain angle.
For a completely blank canvas, it is necessary that the pickets overlap each other by half.
The disadvantage of checkerboard is that the material consumption per 1 linear meter increases by 50%.
An economical option for fastening picket fences, since the strips of material are fixed in one layer. Often gaps up to ⅔ of their width are left between the slats, but this is not critical. The step between the elements may be larger, or they may be attached closely.
Disadvantage: due to the gaps, the area remains completely visible.
Most often found:
Less common design top line like a pyramid, wings.
The unusual spans will be complemented by a stone or brick base.
It is carried out at the design stage of the structure. The future structure is schematically depicted on paper. Determined total length, number of support pillars, transverse joists.
You need to calculate how much picket fence you will need after you have determined the height of the fence and the size of the installation step.
The volume of fasteners also depends on the amount of material. When fixing with self-tapping screws, 1 strip requires at least 2, and preferably 4, self-tapping screws.
Let's consider the procedure for assembling a fence with pillars made of profile pipes on strip foundation. We will need:
The entire amount of work can be done alone, but it is much easier to cope with the process together, so if possible, find an assistant.
Upon completion preparatory stage you can start marking. It is performed using wooden pegs and rope. The pegs are driven into the ground at the locations of the supports, and a rope is stretched between them.
The foundation for such a fence is not only strip. But this type is more reliable, more durable and suitable for massive structures.
If you choose metal supports, remember that they need protective treatment from corrosion, and to make them more beautiful, before installation it is recommended to paint them to match the picket fence.
Square or square pipes are used as transverse joists. rectangular section and welded to the posts.
Supports with ready-made holes for joists are available for sale. Then the fastening is done with bolts.
Photo: welding logs to metal poles For fences up to 1.5 m high, two joists are enough. At higher heights, it is better to increase the number to three pieces. In this case, the fence will cope well with any wind loads.
The top of the pillars and the edges of the joists are protected with plugs, possibly plastic ones. This way, moisture will not get inside the pipes.
There are 2 options for fixing the slats:
Regardless of the chosen type, all fastening elements are matched to the color of the picket fence.
For a transparent fence, the slats are fixed at a distance of up to 5 cm; for a solid fence, they must overlap each other by at least 30%.
Below are 4 metal picket manufacturing companies whose products are most often purchased.
The company is popular both in the Russian and European markets. Issues various products from metal profiles, PVC:
All products are certified.
Produces and sells construction materials.
The Euro picket fence is made of steel 0.5 mm thick. The edges are rolled. Phytoresistant (does not fade in the sun), does not rust. Each plank is wrapped in film. The service life of the products reaches 50 years.
All products are certified.
The group of companies makes and implements:
EugeneST LLC produces metal picket fences under its own brand “Barrera”.
The production association has a head office in Belarus and many branches in nearby CIS countries. Has been producing for over 15 years building materials, including a metal picket fence. All products are sold under the Kronex brand.
By creating a fence from metal picket fence, you get a beautiful, durable structure that does not require maintenance and perfectly protects the area.
125167 Moscow Leningradsky Prospekt, 47
https://www.siteThe design of a metal picket fence consists of vertical posts, transverse horizontal guides and metal strips. Externally, such a fence is very similar to a classic wooden one. But only this one is relative the new kind fencing has an impressive list of advantages, thanks to which it has gained wide popularity. A metal picket fence from “MASTEROVIT” is reliable, easy to install and transport, excellent protective properties, an impressive exterior and the ability to ensure air circulation in the area. Our fences, made of high-strength materials using advanced technological lines, last for decades and require virtually no maintenance or care.
Metal picket fence Olympus Novalux Economy
The cost of the fence includes:
Metal picket fence: one-sided U-shaped 125 mm wide, with a gap of 10 cm
Columns: 60x60 mm with wall thickness 1.5 mm
Cross members (joists):
Painting the fence frame: Primer GF-021
Services: Installation
Fence warranty 36 months Price: from 1099 rub. per p.m.
Metal picket fence FinFold Standard
The cost of the fence includes:
Metal picket fence: single-sided FinFold with a width of 100 mm, with a gap of 3 cm
Columns: 60x60 mm with wall thickness 2.0 mm
Cross members (joists): 40x20 mm with wall thickness 1.5 mm
Painting the fence frame: Primer GF-021
Services: Installation
Fence warranty 36 months Price: from 1434 rub. per p.m.
Metal picket fence FinFold Premium
The cost of the fence includes:
Metal picket fence: double-sided FinFold with a width of 100 mm, with a gap of 2 cm
Columns: 60x60 mm with wall thickness 2.0 mm
Cross members (joists): 40x20 mm with wall thickness 1.5 mm
Painting the fence frame: Hammerite
Services: Installation
Fence warranty 36 months Price: from 1625 rub. per p.m.
Installation savings
All you have to do is call, and we will do the rest for you. Just 3 steps to save.
For the total cost linear meter metal picket fences have an impact on:
Metal picket fences are currently very in demand. Unlike structures made of corrugated sheets, these are more modern solutions They have a spectacular exterior and provide air circulation throughout the plots.
Innovation on Russian market was the proposal of the MASTEROVIT company - a fence made of Euro picket fence (metal). Such fences, made of high-strength materials using advanced technological lines, last for decades and require virtually no maintenance or care.
The MASTEROVIT company is one of the best on the Russian market. The installation of a fence by our specialists is a work that is well-organized down to the smallest detail, carried out strictly according to a predetermined schedule.
The above advantages allow us to set the most favorable prices for European picket fences for consumers. We offer two implementation options. The cost of fence per linear meter with installation is reduced due to reduced production costs and optimization of manufacturing and installation.
The Finfold euro picket fence was developed in the process of cooperation with engineers from Finland and patented by specialists from the MASTEROVIT company. The material combines an attractive appearance, reliability, durability and unpretentiousness.
Designed by Finnish technology the conveyor is equipped with 12 rolling rollers. The possibility of product deformation during the production process is eliminated.
We can produce metal picket fences of any height (from 100 to 4000 mm) at the request of the customer. In addition to the main material, the following are used in the construction of fences:
We offer several options for processing fencing:
Various polymer and powder coatings are available to order. From choosing an option finishing The service life of the fence and the frequency of its maintenance depend.
Classic polymer coatings cheaper than powder analogues. However, if you want to maximize the life of the structure while maintaining a presentable appearance and avoid maintenance costs, it is better to choose powder coating.
The processing of metal picket fences by our specialists takes place under the control of Henkel, one of the leaders in the paint and varnish materials market.
We offer various color solutions. “Bog Oak” is popular. The double-sided coating imitates a wooden fence by 90%.
Chocolate
RAL 8017
Green moss
RAL 6005
Ripe cherry
RAL 3005
Grey
RAL 7004
Ivory
RAL 1014
Ultramarine
Ral 5002
Signal blue
RAL 5005
Sea wave
RAL 5021
green foliage
RAL 6002
Wet asphalt
RAL 7024
White
RAL 9003
Types of colors of double-sided euro picket fence:
Chocolate
RAL 8017
Green moss
RAL 6005
Ripe cherry
RAL 3005
The next step is welding the joists. A picket fence is attached to the resulting crossbars. Galvanized roofing screws of the same shade are used.
A metal picket fence can be attached to the joists on both sides ( standard solution), and from both (“chess”). Any of the implementation options will preserve the area's ventilation.
To protect the end part of the structure from external influences a decorative strip is installed. A European picket fence takes on a complete appearance.
We are engaged in the construction of reliable and durable fencing. 130 professional teams work strictly according to schedule, even in areas remote from the capital, on any type of soil and at any temperature.
Even during the season suburban construction We fulfill orders as quickly as possible. Necessary materials and components are always available in our warehouses. After completion of work, construction waste must be removed.
Our goals are mutually beneficial cooperation, maintaining an impeccable reputation and expanding our customer base. By ordering a European picket fence from the MASTEROVIT company, you will receive service highest quality and a guarantee for the work we perform.
Buying a fence for a dacha made of Euro picket fence from the MASTEROVIT company is the best and least expensive solution. We will meet your expectations. Professionals will produce a reliable and durable fence from the manufacturer. We will solve any task efficiently and quickly.
It’s very simple to order a European picket fence with installation:
We have developed a unique picket fence calculator. This service allows you to calculate the cost per linear meter of the structure depending on the desired characteristics of the fence.
Contacting the MASTEROVIT company is an opportunity to install a fence made of Euro picket fence at the lowest possible price
in Moscow and Moscow region.
