Any area must be protected from prying eyes by a reliable fence. It can be constructed from different materials. The most popular and a budget option- This is a fence made of corrugated board.
It is suitable for those who want save on material and do not spend a lot of time building a fence. How to make a fence from corrugated sheets with your own hands is discussed in this article.
Corrugated fence has a number of advantages before others:
An important advantage of the design is the small amount of excavation work and ease of installation.
If you didn’t find a helper for you, don’t worry! With a fence like this I can handle it on my own.
The benefits of a fence made from such material include its opacity. This is important for free movement on the site. At the same time, you don’t have to be in sight of your neighbors.
Cons of corrugated sheets:
What if welding machine out of stock, or the self-taught master does not know how to work with welding? You can install a fence without welding, with the help of auxiliary: brackets, bolts, self-tapping screws and a construction clamp.
With this type of fastening, you cannot use parts that can damage the protective coating.
In addition to profiled sheets, transverse fencing profiles called joists are used. It’s easy to attach the logs to the post: a bracket and a construction clamp will allow do without using a welding machine.
The following advantages are highlighted in using the bracket:
Welding work is provided metal elements fence reliable fastening. After welding the fasteners, the surface is treated with a special primer to secure the work done and give the product greater thickness.
A fence with posts (example in the photo on the left) is chosen by the owners of households who What is important is the highest stability of the sheets and a respectable appearance.
Just like for metal pillars, markings are made for future masonry for brick fortifications.
Craftsmen make a hole into which concrete is poured. This procedure is important because large weight of the future structure. The building material is laid out in an area of 1.5 by 1.5 bricks.
Throughout the laying of a brick pillar, a level and plumb line are used for accuracy.
At a height of 0.2-0.3 meters and 1.5-1.7 meters from the top edge of the soil, they are laid inside the column brackets to support the structure. After the masonry is completed, the logs are welded to the brackets and covered with a protective coating.
After completion of the masonry, the surface of each pillar covered special roof to protect brick pillars from precipitation.
Sometimes the owner of the future fence decides to install a fencing structure made of profiled sheets without a foundation. Before making such a decision you need to consult a specialist, which will tell you about the type of soil and its swampiness.
If there are differences in the area, the presence strong wind and wateriness of the soil, installation cannot be done without a foundation.
If the soil layer allows this type of construction, it is best to use profile pipe 100 mm in diameter. The height of the pipe is selected based on the planned height of the fence. The top of the support is welded to prevent moisture from entering.
A building with a foundation is much more reliable than without it. If you have the financial opportunity and extra time, it is best to dig holes. They are filled with gravel mixed with broken bricks. The hole is filled with cement, with pre-fixed supports.
Fixed pillars should not be touched for four days until the cement is completely dry.
Work with a profiled sheet begins with a drawing detailed diagram, which will take into account all the points:
At this stage, you need to decide what type of fence will be on the site: continuous or sectional. Continuous construction involves a continuous arrangement of corrugated sheets around the entire perimeter.
A sectional fence is divided into segments separated by pillars.
When choosing a material, you need to pay attention to the height of the sheet and its thickness. The material should not be too thin.
For country house located in a temperate climate, optimal choice there will be a fence with plastisol or polyester coating.
Carrying out foundation laying work - one of important stages
, because it is at this moment that places for future pillars are marked. And from correct location The evenness of the structure will depend.
First produced marking the future fence. For this procedure, you can use pegs with a rope attached and a hydraulic level for accuracy. Then the places for installing the pipes are outlined. In the indicated places, recesses are made (recommended depth - 1 meter).
The pillars serve as support for the profiled sheet. From the strength of the material from which they are made, the reliability of the fence depends. The height of the pipe should be selected taking into account the depth to which the support will go into the hole.
Pillars made of profiled pipes 40x20 are popular. The thinner the corrugated sheet, the smaller the distance between the supports should be..
A budget option for supporting a fence is wood. Wooden pillars less in demand due to fragility. However, they are able to withstand significant loads. With this choice, you need to carefully treat the pillars with an antibacterial solution.
Pillars needs to be adjusted in height. In relatively flat terrain, the fence along the horizontal line should not have significant deviations or differences. To do this, use a watery level. A mark is placed on the posts and the extra centimeters are cut off with a grinder.
The pillars are installed in pre-dug holes and filled with concrete with the addition of crushed stone. The surface of the concrete is covered with a film to prevent moisture and speed up drying.
Installing poles is difficult, but it can be done with your own hands. The main thing is to be precise in your work.. It is recommended to carry out installation together with an assistant.
After the concrete has successfully dried the surface of the vertical posts and joists are coated with paint or primer. If you do not carry out this procedure in advance, then later, when the sheets are already tightly held, they will interfere with surface treatment.
It is best to install corrugated sheets with a partner. One holds the bottom of the sheet at the level of the tensioned thread, and the other secures the surface with a screwdriver at the top.
After checking that the sheet is horizontal, it is strengthened in three or four more places. The sheets are fastened with self-tapping screws or bolts. Can Make the job easier with a screwdriver with low revs. Self-tapping screws must be screwed through one wave.
Despite the fact that a self-tapping screw can be easily screwed into a corrugated sheet, it is better to make a preliminary hole in the material with a diameter slightly larger than the diameter of the self-tapping screw. This is important when the metal expands linearly due to sudden temperature fluctuations.
Perpendicular screwing of the self-tapping screw - necessary condition fastening of corrugated sheets. For better sealing of the fastening, special neoprene washers are used, which should fit tightly to the sheet.
For installation accuracy, use a level. It is important to install the first sheet evenly, since all other work will be carried out from him. The sheet is attached in four places with a distance of 20 cm from the edge. The next sheet is laid with an overlap in one wave.
To accurately hit the crossbars with a self-tapping screw, you need to pull the string with outside at their level.
It is unacceptable to make a minimum number of fastenings: due to gusts of wind, the fence will be subject to loosening.
The final stage of installation is the installation of the end strip. It will cover the edges and create the appearance of a finished structure.
We quickly and easily build a fence from corrugated sheets without a foundation - video instructions:
Fences made of corrugated sheets are used everywhere. This material is popular due to its simplicity and speed of installation, attractive appearance and affordability. If you agree with this statement and are planning to build yourself such a fence, we suggest that you familiarize yourself with step by step process its construction.
If the site where the fence will be erected is located in the city, you need to submit an application to the appropriate authorities asking for permission to carry out the work before installing a corrugated sheet fence. The application must be accompanied by drawings of the future fence and construction estimates, legally approved by architectural and construction control authorities.
The permission received and project documentation should be registered with local authorities and only after that construction should begin.
If the fence will be erected on a site located in the suburbs, it is not necessary to obtain permission. You will only need documents confirming your rights to it.
Failure to comply with current legislation may result in a fine or demolition of the illegally erected fence at the expense of the owner of the site. Also, it will not be possible to sell such a house in the future.
Before erecting a fence, you need to decide which ones to build. Gates can be swing, sliding, sliding. It is easier to build swing gates, but this type of gate requires extra space on the site to open it. To avoid any problems, you should choose the type of gate at the site planning stage. It is written in more detail about planning a suburban area.
Before construction begins, it is necessary to calculate the material taking into account the perimeter of the area to be fenced and the height of the fence. Remember the overlap. It is maintained within the range of 3 to 10 centimeters.
The boundaries of the location of the entrance gates and entrance gate are immediately marked, the installation pitch of vertical supports is calculated (usually 2.5-3 meters), the area is leveled and cleared of debris.
To mark the area you will need a tape measure, cord, and stakes. The latter are installed in the corners where the main pillars will be, and a cord is stretched between them. Then, with a certain step (2.5-3 meters), auxiliary pegs are driven in between the main pegs. They don’t forget about the future gate with a wicket; markings are also made for them.
To build a fence you need to buy: 
Pouring the foundation and installing support pillars
For fences made of corrugated sheets, two types of foundations are used: strip foundation, when a trench of a certain depth is dug along the perimeter of the marking (can be from 50 cm to 1.5 m) and filled with concrete, and local, when a separate hole is drilled for each post and also concreted. You can use a special drill for drilling. Installation of support pillars is carried out in the following order:
If you decide to make a local foundation for a fence from corrugated sheets, make recesses with a diameter of 25 centimeters and a depth greater than the freezing depth of the soil in your area.
Strip foundation is used in construction different types houses. There are deep strip foundations and shallow ones. The first type of foundation is used for houses with a basement or houses over one floor, the second - for small outbuildings and one-story houses. You can build on a strip foundation. Calibrated timber has good thermal insulation qualities and provides a microclimate that is comfortable for humans.
Country house frame-panel houses, houses using Canadian technology and many others can also be built on a shallow strip foundation. About dachas frame-panel houses read in, and it’s written about how to build using Canadian technology. Both types of buildings are erected quickly.
Installation of cross pipes (logs)
When the concrete has hardened, the installation of transverse pipes begins. Their number depends on the height of the fence. The distance between the logs is maintained at one and a half meters. They are joined to vertical posts using a weld. If you have no experience in this matter, it is better to seek help from a specialist.
When all the jumpers are welded, they begin to paint the welded areas, thereby protecting the metal from corrosion. The top of the vertical supports is covered with plugs.
Installation of gates and wickets
Making gates and wickets is the most difficult process. First, frame structures with diagonal or horizontal connections. The posts of the wicket and gate are connected to each other by a transverse joist to give the structure greater rigidity. Next, the assembled frames are attached to the posts and covered with sheets of corrugated sheets. You can immediately mount the corrugated sheet and then install the gate and wicket.
Fastening corrugated sheets to the frame
The corrugated sheeting is secured with special self-tapping screws and rubber gaskets. For one linear meter of corrugated sheeting, from 12 to 14 fasteners are used. starts in the direction from the gate in both directions. The overlap of the sheets is one wave, the distance between the screws is 2 waves.
Cleaning the area
Installation is completed, you can start cleaning the area. The accumulated garbage must be collected and taken to where it belongs. You can remove the dust from the fence and begin to enjoy the new look of your site.
Fence made of brick and corrugated sheets
Installation of fences from corrugated sheets
Fence at the dacha made of corrugated sheets from the inside
Many construction teams undertake the installation of a fence made of corrugated sheets. The process is not troublesome and fast, and the earnings are significant.
You can eliminate this expense item from the overall estimate for landscaping a dacha or private home by deciding to make a fence from corrugated sheets with your own hands.
The purpose of the fence on the site is to enclose the territory. At the same time, he also has another function - representative.
Previously, the main material for constructing fences was wood - an affordable material, but requiring care and protection from destruction; currently, other building materials compete with it: brick, concrete, polycarbonate, mesh, forging, corrugated board.
In terms of the ratio of the parameters “price-installation-durability-appearance”, the leadership belongs to corrugated sheeting, which has led to its wide distribution among users.
Few have such a list of advantages. building materials. But all these properties are fully revealed only when correct installation. This means you need to know how to make a fence from corrugated board correctly. Within the article, we will talk about the nuances of choosing a material, the specifics of its calculation, the types of frames for a fence, we will describe how to attach corrugated sheeting and much more.
Do-it-yourself corrugated fence -
step by step guide from A to Z
Installation of a fence made of corrugated sheets only involves screwing the sheet to the frame; this is a process consisting of several stages. We will describe each of them in detail in the form of step-by-step instructions.
An arbitrary schematic drawing (sketch) is needed in order to visualize design features fence
There are two types (types) of corrugated fence:
It is the type of fence that determines the material consumption and methods of installing structural elements.
The following is applied to the drawing diagram:
Note. At sectional fence The width of the section is determined by the width of the sheet. It must be a multiple of 1, 1.5 or 2 sheets.
A detailed diagram simplifies the calculation of the material.
Construction will proceed quickly if the materials necessary for manufacturing are prepared in a timely manner.
When choosing a profiled sheet (corrugated sheet), you need to pay attention to the thickness (0.45-0.5 mm +/- 0.06 mm), wave height, absence of a capillary groove, parameters, coating, color and texture.
The profiled sheet has a high windage, this must be taken into account when planning the frame.
Note. The dimensions of corrugated sheets for fences differ between different manufacturers; this must be taken into account when choosing a material. It is also worth knowing that the warranty period for galvanized corrugated sheeting is 20-30 years, and with polyester coating - up to 50 years (depending on the thickness of the layer).
Theoretically, any material can be used: wood, stone, metal.
When deciding which poles to use for a fence, keep in mind that the simplest and affordable option - metal pipes.
The parameters of the racks depend on the expected load. Typically, pipes of 60x40x2 mm or 40x40x2 mm are used. For round pipes diameter - 60-100 mm.
You can use store bought ones finished pipes for a fence (photo) (for all types of soil) or piles (normal soils and loams).
The advantage of ready-made support posts is the presence of a “heel” for installation on a cushion, holes for attaching corrugated sheets and an upper plug that prevents water from entering the post.
For lags (crossbars) it makes sense to use square pipes 40x40x2 mm. or 40x20x2 mm. General recommendation- the width of the log is equal to half the width of the support column.
It is unacceptable to use wooden logs, because the wood tends to rot in the place where the sheet is attached. This will not only reduce the service life of the fence, but will also prevent the sheet from being reused. Metal corner It is also not suitable for logs; with a thickness of 2 mm, it will not provide adequate resistance to wind load, and manufacturers do not recommend using a thicker one.
Note. A special self-tapping screw for corrugated sheets with a drill is designed for drilling metal with a thickness of no more than 2.5 mm. So the use of a thick-walled profile is fraught with additional drilling efforts.
Special fasteners (brackets) are used when assembling the fence frame using a non-welding method, using hardware.
Plastic plugs perform a protective function to prevent water from getting inside the pipe.
In practice, the pillar is covered with a special cover or plastic bottle. Not very aesthetically pleasing, but certainly cheap, and good as a temporary solution to the problem.
Needed for weldless assembly of the fence frame. For this, an M6 bolt or screw (30 and 20 mm) is used. As well as self-tapping screws for fastening corrugated sheets or rivets.
Professionals advise using a self-tapping screw, because... it is equipped with an additional gasket (neoprene rubber), which allows you to press the corrugated sheet tightly without damaging its surface. Its length is 15-35 mm.
Advice. When using rivets, it is recommended to process the edges of the hole for them special paint. This will prevent the rapid appearance of rust at the fastening site and the formation of rusty stains on the corrugated sheet, which are very difficult to eliminate.
The paint is used to touch up scratches that may appear during installation of the corrugated sheet, as well as to paint over the cut area on the sheet. The consumption is small, one can is usually enough.
U-shaped strip (fence, covering), which is installed on top edge(rib) of the profiled sheet and protects users from possible cuts, and the sheet from rust.
Material prepared for the website www.site
Note. When purchasing, please note that the edges of the plank must be curved (rolled). Otherwise, they will not only scratch the metal during installation, but will lose their shape (the edges will move away from the sheet) during operation.
How to determine how much building material is required for production.
Note. The sheet can be installed both vertically and horizontally. With horizontal fastening, the height of the fence will be equal to 1, 2 or 3 working widths of the sheet. For vertical - determined by the customer.
Advice. When calculating, do not operate with such a concept as total area required corrugated sheeting. Make calculations in pieces for a given sheet height.
The number of supports depends on the distance between the corrugated fence posts
Note. The calculations take into account that support posts (pillars) must be installed at the corners of the fence, as well as at the location where the gate and/or wicket is installed. The number of intermediate supports is rounded down. And the difference is compensated by the deviation from the specified distance between the posts.
The size of the post is determined by the height of the fence, taking into account that the posts go deep into the soil by 30% of their length. Thus, with a fence height of 2,000, the height of the support post for a fence made of corrugated board should be 2,600-2,700. For intermediate posts, an installation depth of 25% of the total height of the fence is allowed. Then the length of the rack will be 2,500 mm.
The quantity depends on the method of installing the fence.
Thus, the total timber timber is determined by multiplying total length fence by the number of crossbars.
The number of plates is equal to the number of support posts multiplied by the number of rows of joists.
The number of plugs is equal to the number of support posts. Plus 2-3 spare ones (useful during the operation of the fence).
When calculating the self-tapping screws, it is taken into account that the fastening is carried out in two extreme waves and through two in the middle of the profiled sheet into each of the transverse logs. Thus, with two transverse logs per sheet, 6 pieces are required, with three - 9 pieces. The number of hardware is rounded up in multiples of the packaging (standard packaging - 250 pcs). Because, during the process of tightening the self-tapping screw, defects may occur.
When fastening with rivets, their consumption increases, since they are fastened along the edges and through the wave.
Standard paint packaging: 50, 100, 200, 500, 900 g. The choice depends on the length of the fence. Usually 50 gr. jars are enough.
The quantity is equal to the length of the fence divided by the working length of the plank. The standard length of the strip is 2,000 mm, the working length (including overlap) is 1850-1950 mm.
Installation technology step by step:
Clearing the soil surface of anything that will interfere with the installation of sheets and posts.
Note. The destruction of the corrugated sheet begins at the point of contact with the ground surface. Pebbles, dirt, and mechanical damage lead to the appearance of defects at the bottom of the sheet. In addition, the uneven terrain of the site often creates difficulties when installing supports. That is why the foundation for a fence made of corrugated sheets is a mandatory stage in constructing a fence.
A soil study usually helps to decide on which foundation to install a corrugated sheet fence in a specific area. But since a fence made of corrugated board is a relatively lightweight structure, a regular one is suitable for it. Its optimal depth is 300-400 mm, and minimum width foundation for a corrugated fence is determined by the width of the support post (posts).
We will not dwell in detail on how to pour the foundation. But let us note this nuance: the depth of the pit in the place where the base support posts are installed (at the edges of the fence, corners, at the place where the gates are installed) should be 1/3 of their height + 100-150 mm for installing a cushion under the base of the post. For intermediate posts - 1/4 of the height of the support + the height of the pillow. This will eliminate the influence groundwater and soil freezing on the stand.
Preparation and installation of formwork is no different from arrangement strip foundation under a house or gazebo.
First of all, the basic support posts are installed (along the edges of even sections of the fence), a rope is stretched between them and intermediate posts are installed along it. At the site where the support posts are installed, the soil is removed with a drill and a gravel-sand cushion is poured onto which the posts are installed. In this case, metal pipes should be treated with an anti-corrosion solution.
Users note that it is better to concrete the racks at 100-150 mm. This way they remain stable when reinforcing the formwork and filling it with concrete. If you plan to compact the pillars, then the cushion should be made 200-250 mm high and the posts should be hammered into it. This method is more labor-intensive, but less expensive and reliable.
Advice. The use of a level and plumb line when installing racks is mandatory.
More simple option There will be installation of support posts without laying out the foundation. Installation requirements are similar. The depth is equal to 1/3 or 1/4 of the length of the rack depending on the location of its installation, the thickness of the gravel-sand cushion is 100-150 mm, mandatory treatment with an anti-corrosion solution, checking the level and reliable concreting.
Note. In practice, corrugated fence posts are installed with deviations from the given technology. This is justified in stable soils.
Alternative ways to install racks are shown in the diagram.
The corrugated sheeting is fastened to transverse joists. They are mounted on support posts after they are securely concreted. In this case, you cannot rush the work, because... this may cause the stand to deviate from the vertical.
Cross joists can be welded or screwed to the support posts. Craftsmen recommend using a holder plate (bracket) for these purposes. Thus, the plate is screwed to the support post, and the joists to the plate; this makes the project a little longer and more expensive, but the fastening is considered more reliable.
- end-to-end in front of the post. The method is ideal for constructing solid fences;
- behind the pillar using a holder (bracket). Suitable for constructing sectional fences;
- on the side of the pillar. The advantage of this method is that the corrugated sheeting can be attached not only to the joists, but also to the support column, which makes the structure more stable. But the duration of work and the consumption of self-tapping screws increases. Suitable for constructing sectional fences.
Note. If the site has a significant slope, the transverse logs are mounted offset, as shown in the photo.
The fully finished frame is coated with anti-corrosion primer and paint.
This stage is possible only if a sectional type of corrugated fence is selected. Here, the installed metal support posts can be lined with brick or lined with stone. According to many users, a fence made of corrugated board with brick pillars looks more beautiful and presentable than one with metal posts or even a solid one.
Note. Similar decor fence supports are thought out at the planning stage. Because Availability brickwork makes adjustments to the distance between the pillars, and hence the number of sheets mounted in the sections.
Of course, you can decide to finish the racks with bricks at any stage, but you should be prepared for the fact that the corrugated sheet will have to be cut to length, and this will lead to waste not only of the sheet, but also of paint, and cutting tool, time and money.
Users agree that this work should be entrusted to masonry masters, because... namely bricklaying in in this case will determine the aesthetic properties of the fence. If you decide to do the work yourself, you should know:
To avoid rust, you need to know how to attach corrugated sheets correctly.
To fasten the corrugated sheets to each other and to the joist, rivets or special screws are used. Installation begins based on the sheet configuration. One of the outer waves of the sheet is a covering wave (left or right depends on the manufacturer’s equipment). The first sheet is mounted in such a way that the covering wave of the next one covers the wave of the previous one, and not vice versa. In order not to encounter a situation where a piece of sheet material fails near the gate, installation should begin with these elements.
Advice. To ensure ventilation, you need to make the distance of the sheet along the ground surface 50-100 mm.
The corrugated sheet must be secured at the edges to each of the transverse joists. One fastener is located in the middle of the sheet. If the fence is being built in a windy region, it is advisable to fasten the hardware through two waves.
To screw a self-tapping screw into corrugated sheeting, you also need to have certain skills. Namely, to know that the self-tapping screw:
In fact, the installation of a fence made of corrugated sheets ends with the steps described above. However, manufacturers, craftsmen and experienced users recommend covering the upper end of the profiled sheet with a special decorative U-shaped strip (end fence strip).
The overlay will give the fence aesthetic appearance and will prevent damage to users from the sharp edges of the sheet.
The plank is simply placed on the sheet, so when ordering, pay attention to its width.
For corrugated sheets with a wave height of 8 mm, you need a strip 10 mm wide (including rolling) or 8 mm (without rolling).
Please note that the corrugated sheets of most manufacturers are colored only on one side. The unpainted gray side looks towards the house. If you plant trees, shrubs or grapes along the fence, this will hide the unpresentable appearance of the fence.
Cleaning is the logical conclusion construction process. Cleaning is necessary in order to avoid injury from scraps of corrugated board, scattered screws and to give the area a well-groomed appearance.
| Material | Cost of a corrugated fence
subject to DIY installation |
The cost of installing a corrugated fence
subject to the involvement of hired workers |
|---|---|---|
| Corrugated sheet | 140-680 rub/sq.m. | |
| Pipe 60x60x2 | 110 rub/m.p. | |
| Pipe 40x40x2 | 70 rub/m.p. | |
| Pipe 40x20x2 | 60 rub/m.p. | |
| Plate holder | 80-150 rub/piece. | |
| Pole plug | 1.7-59 RUR/pcs. | |
| Hardware (screw) | 2.5-5.3 rub/piece. | |
| 180 rub/piece (cylinder) | ||
| End strip (2,000 mm) | 60-110 rub/piece. | |
| Cement | 175 RUR/50 kg. | |
| Sand | 80 rub/50 kg. | |
| Gravel, fraction 20-40 mm. | 100 rub/40 kg. | |
| Nerzhamet-Grunt - alkyd primer for metal | 210 rub/kg. | |
| Foundation structure | 0 | 5,000 rub. per sq.m. (the cost is affected by the type of soil) |
| Drilling a hole or driving a pile | 0 | From 200 rub/piece. |
| Concreting support pillars | 0 | From 500 rub/piece. |
| Attaching the log | 0 | From 50 rub/m.p. |
| Fastening the corrugated sheet | 0 | From 200 rub/m.p. |
The total costs of constructing a fence made of corrugated sheets are determined based on the need for a particular type of material.
The cost of installing a fence made of corrugated sheets on a turnkey basis (price per meter of work, materials with installation) is shown in the table.
A fence made of corrugated sheets looks great and withstands any temperature changes and all types of atmospheric phenomena. But there are two weak points - windage and poor-quality installation. We hope that the information provided here will allow us to take into account and eliminate both of these shortcomings in a timely manner.
Today it is customary to make fences from a wide variety of materials, the choice of which in most cases depends on the requirements for the fence, the nature of the area on which it is installed and the size of the budget.
Before you begin to thoroughly examine the question of how to construct a fence from corrugated sheets without the help of specialists, you need to understand what a corrugated sheet is, what it is made of and what it represents, what are the reasons for its enormous popularity today, service life, positive properties .
Profiled sheet, also known as corrugated sheeting, is usually made of steel and has a zigzag or wavy pattern. correct form, in other words we can say that it is profiled. Due to this specific shape, it has additional strength and does not deform in strong wind gusts.
The steel sheet, which is a workpiece, is treated with zinc before the profiling process. As a result of such treatment, its service life increases to 50 years. This is one of the main parameters of the popularity of building a fence from corrugated sheets with your own hands. Steel sheets treated with zinc can be safely painted in various colors. Therefore, when implementing the idea of building a fence from corrugated sheets, you choose the required color yourself.
Fence made of corrugated sheets and its advantages
Before starting the construction, manufacturing or construction of anything, they first prepare and calculate an estimate, then select and purchase all necessary materials.
When buying profiled sheets for a fence, always remember that when installing it, the fixation occurs with an overlap of one wave, therefore the material consumption will be greater. Therefore, it makes sense to take the time and correctly calculate the number of sheets needed.
When erecting a fence from corrugated sheets, use metal pipes with a diameter of 50 to 60 mm for the main pillars. The number and length of pipes are calculated based on the total distance at which the fence needs to be built. It is recommended to place support pipes at a distance of no more than 2.5 m.
Naturally, when building a fence, the need arises to make a gate. To do this, you need to purchase a special steel profile, most often they use a square or rectangular cut. The required amount of profile is calculated taking into account the need to use it in the manufacture of wickets, gates and crossbars.
You will also definitely need self-tapping screws for fastening the metal. They are sold with hats different color, are sold in specialized construction stores.
After finishing shopping for all the necessary materials, start preparing the necessary tools.
To perform such work, you should have at hand:
First of all, to carry out precise actions without errors, look at the photo of fences made of corrugated sheets, draw your version of the fence that you want to see in the final form, in the form of a diagram. This action will be a good help when making calculations required quantity material. Using this drawing it will be convenient to calculate the dimensions of the fence elements.
After completing the circuit, proceed with the next steps. Make markings for the posts in the place where you plan to build the fence. It would be more practical to start marking from the location of the future gate. The dimensions of the transverse profile and the distance between them described above should be taken into account. Leaving the right space under the gate, mark two places under support pillars(there will be a gate between them). Then drive in the wedges. The following actions will be the same - make further markings for the pillars on both sides of the place for the gate. After completing these steps, take the rope and stretch it from the first to the last wedge.
When you look at a stretched rope from the side, you can easily determine with your own eyes all the errors. Next, you will need to correct the errors, maintaining the previous distance indicated by the markings.
The next stage is excavation work. It is necessary to dig holes for each previously planned pillar, half a meter deep, 20-25 cm wide. Prepare medium-sized brick fragments (cement mortar should flow between them). Take the pillar, lower it into the hole exactly in the middle, cover it with fragments of brick, check the level and fix it. These steps must be repeated with each pillar.
Remember, for a longer service life of the posts, they need to be primed and painted before installation. This will protect them from corrosion for as long as possible.
When all the posts are installed, the newly tensioned rope will help identify deviations from the norm. Naturally, we correct all deviations.
Then stir cement mortar and pour it under each pillar. After this, the pillars must be left motionless for 5-6 days - this time is just enough for the solution to completely dry and harden.
After five days, construction work can continue. The next step is to attach the crossbars to the posts using a welding machine. They are fixed at a height of 30 cm from the ground and 30 cm below the top edge of the pipe. We carry out welding actions in relation to all pipes. Then we prime and paint the entire resulting structure. We wait for the paint to dry completely.
At this stage, the final appearance of the fence will be formed. Now you need to attach the corrugated sheets to the crossbars. It's not at all difficult and exciting. This must be done with pre-prepared self-tapping screws, every 20-25 cm. Basically, fastening begins from the place where the gate is planned and continues in one of the selected directions, then in the other.
These are the main stages of constructing a fence from corrugated sheets. The process is basically simple, although it does require some simple skills. But at the end of the work, you will have an excellent fence that will last a long time. If you wish, you can update it and repaint it.
No one suburban area can't do without a fence. Even if the most friendly relations have developed with neighbors, any owner still strives to fence off his property at least along the outer perimeter. Agree, you feel much more comfortable in the yard when you know that strangers are not watching you, willingly or unwillingly. And worries about the safety of one’s own property stored in the yard or outbuildings become less acute. Therefore, questions are always among the top priorities.
Not so long ago, the choice of fence design and materials for its manufacture was not so great. Nowadays, the variety of options is so wide that it is even difficult to list them. But probably one of the most popular materials is a profiled metal sheet (otherwise it is called corrugated sheet or corrugated sheet). This is due to the fact that the cost of a set of building materials for the construction of a fence from corrugated sheets is quite affordable for the average homeowner, and the work on constructing such a fence cannot in any way be classified as a task of an increased level of complexity, that is, they can be carried out on their own.
Let's take a closer look at what the advantages of such a fence are, let's see how to build a fence from corrugated sheets with your own hands, without resorting to the help of a hired contractor. construction crew and rental of special equipment.
Some owners of suburban areas treat corrugated fences with some prejudice, considering them some kind of frivolous fence for their territory. And it’s completely in vain - corrugated sheet fencing has a number of advantages that make it extremely popular.
