Stairs. Entry group. Materials. Doors. Locks. Design

The cost of building a log bathhouse 5x8 without finishing under the roof is 378,000 rubles

• The foundation is support-column. 2 blocks per cabinet (for one-story houses) and 4 blocks in a cabinet per cement screed(for houses with an attic). Concrete blocks, solid, size 200x200x400 mm. The cabinets are installed on a compacted sand bed. Sand (PGS) is provided by the customer.
• External walls – profiled timber natural humidity section 145x90 mm (wall thickness – 90 mm) “block house” or straight profile.
• Total in the log house one-story baths– 16 crowns. There are 17 crowns in the log house of the baths with the attic.
• An open terrace (if any) on supports made of planed timber with a cross-section of 100*150 mm, with shrinkage jacks. The fencing is a handrail made of planed timber with a cross-section of 40*100 mm. Steps at the entrance.
• The clear ceiling height of the first floor (from the floor joist to the floor beam) for one-story baths is 2.15 m (+/-50mm); for baths with an attic 2.29 m (+/- 50 mm)
• The second floor is attic. Clear attic ceiling height (from floor beam to ceiling beam) – 2.25 m
• The height of the roof at the ridge for one-story baths is 1.20 m.
• The gables are a frame made of natural moisture boards with a section of 150*40 mm, 100*40 mm. Exterior decoration gables - lining (spruce/pine AB) 17*90 mm. Wind protection – NANOIZOL “A” (for buildings with an attic).
• In the gables of one-story buildings, a door (1 piece) and ventilation hatches (1 piece for each gable, under the ridge) are installed.
• In the gables of buildings with an attic, ventilation hatches are installed (3 pieces for each gable).
• Eaves and roof overhangs with a width of 200 mm (for one-story buildings) and 300 mm (for buildings with an attic). The cornices and overhangs are hemmed with clapboard (spruce/pine AB) 17*90 mm.
• Installation of window and doorways with a dressing crown, without installing casing bars.
• Assembly of a house/bath on the customer's site.

The price of a turnkey 5x8 bathhouse with a foundation and stove is 580,000 rubles

• The foundation is columnar. 2 blocks per cabinet (for one-story baths) and 4 blocks per cabinet on a cement screed (for baths with an attic). Concrete blocks, solid, size 200x200x400 mm. The cabinets are installed on a compacted sand bed. Sand (PGS) is provided by the customer.
• Waterproofing – roofing felt in one layer.
• The strapping is a beam of natural humidity with a cross-section of 150x100 mm. Along the outer perimeter the strapping is laid in two rows. The timber is processed protective composition.
• Floor joists - natural moisture board with a section of 40x150 mm per edge, with a pitch of 600 mm.
• The subfloor is a natural moisture board with a cross-section of 22x100mm. Steam, waterproofing – NANOIZOL S.
• Floor insulation – 100mm KNAUF/URSA mineral wool (or equivalent). Vapor barrier – NANOIZOL V.
• The finished floor of the first floor is a dry tongue-and-groove floorboard (spruce/pine AB) 36mm thick. Every fifth board is fastened with self-tapping screws (for the possibility of re-upholstering the floors in the future).
• External walls - profiled timber of natural humidity with a section of 145x90 mm (wall thickness - 90mm) "block house" profile or straight. A total of 16 crowns (for one-story baths) and 17 crowns (for baths with an attic).
• The partitions of the first floor are profiled timber of natural humidity with a section of 145x90 mm, straight profile. They cut into external walls with a depth of up to 30mm.
• Intercrown insulation– jute fabric 6mm thick
• Inter-crown connection - on a metal dowel ( construction nail 6x200mm, 250mm).
• Gusset- “half a tree.” The outer corners of the log house are covered with clapboard (spruce/pine AB) 17*90 mm in two rows.
• An open terrace (if any) on supports made of planed timber with a cross-section of 100*150 mm, with shrinkage jacks. The fencing is a handrail made of planed timber with a cross-section of 40*100 mm filled with carved balusters. Steps at the entrance.
• The terrace floors are dry tongue-and-groove floorboards (spruce/pine AB) 36mm thick. They are attached with self-tapping screws to each board. The boards are laid in 5 mm increments.
• The terrace ceilings are lining (spruce/pine AB) 17*90 mm. Vapor barrier – NANOIZOL V.
• The clear ceiling height of the first floor (from floor to ceiling) is 2.10 m (+/- 50mm) for one-story bathhouses and 2.25 m (+/- 50mm) for bathhouses with an attic.
• The ceiling lining of the first floor (except for the steam room) is lining (spruce/pine AB) 12.8*88 mm. (joint for layout is allowed)
• The second floor is attic. Clear attic ceiling height (from floor to ceiling) – 2.20m
• Floor insulation – 100mm mineral wool KNAUF/URSA (or equivalent). Vapor barrier NANOIZOL V.
• The attic floors are dry tongue-and-groove floorboards (spruce/pine AB) 36mm thick. Every fifth board is fastened with self-tapping screws (for the possibility of re-upholstering the floors in the future).
• The cladding of the walls and ceiling of the attic is lining (spruce/pine AB) 12.5*88 mm (a joint for layout is allowed).
• Insulation of attic walls - 100mm basalt mats ROCKWOOL (or equivalent). Vapor barrier – NANOIZOL V.
• The attic partitions are a frame made of natural moisture timber with a cross-section of 40*75 mm, sheathed on both sides with clapboard (spruce/pine AB) 12.5*88 mm. The partitions are not insulated.
• Rafters - trusses made of natural moisture boards with a section of 150x40mm, 100x40mm. Installed in increments of 900-1000 mm.
• The gables are a frame made of natural moisture boards with a section of 150*40 mm, 100*40 mm. The external finishing of the gables is lining (spruce/pine AB) 17*90 mm. . Wind, moisture protection – NANOIZOL “A” (for baths with an attic).
• In the gables of one-story baths, a door (1 piece) and ventilation hatches (1 piece for each gable, under the ridge) are installed.
• Ventilation hatches are installed in the gables of bathhouses with an attic (3 pieces for each gable).
• The sheathing is a board of natural moisture with a cross-section of 22*100 mm, with a pitch of 300 mm. Counter-lattice - 20*40 mm slats, along the rafter slopes.
• Roof covering – ONDULIN (burgundy, brown, green) or galvanized corrugated sheeting. Under-roof vapor barrier – NANOIZOL S.
• Eaves and roof overhangs are 200 mm wide (for one-story baths) and 300 mm (for baths with an attic). The cornices and overhangs are hemmed with clapboard (spruce/pine AB) 17*90 mm.
• The staircase to the attic is single-flight, on strings made of planed timber with a cross-section of 145*90 mm. Floorboard steps. The handrail and fencing in the attic are planed timber with a cross-section of 40*100 mm.
• Finishing the walls and ceiling of the steam room - lining (aspen B) 14*90 mm (joint for layout is allowed). Reflective insulation on a foil base - NANOIZOL FB. Counter rail – 10*40 mm (ventilation gap – 10 mm). Before covering, the timber base of the walls is treated with a protective composition for baths and saunas NEOMID 200.
• Two-tier shelf made of planed boards (aspen B) 28*90 mm. Joint width – 40 cm (height – 50 cm); Lounger width – 60 cm (height – 110 cm).
• Installation of the ERMAK 12/ERMAK 16 stove with a hanging tank (stainless steel 35 l) for heating water.
• The base of the stove is brick in one row. Cutting the combustion portal - brick.
• Fire insulation - basalt cardboard, ceiling and roof passages, reflecting screen made of smooth galvanized steel on basalt cardboard, flush sheet.
• The chimney is vertical, with an outlet into the roof through the ceiling. Starting pipe - stainless steel 0.5 mm, stainless steel gate valve, stainless steel starting adapter, sandwich pipes 115 * 200 mm (stainless steel 0.5 mm * galvanized 0.5 mm), galvanized head.
• Installation in a washing room shower tray 800*800 mm with siphon. The drainage outlet beyond the perimeter of the bathhouse is a plumbing PVC pipe with a diameter of 50 mm.
• The windows are wooden, double glazed, with sealing and fittings (screw-in hinges, twist locks). Inward opening doors. Dimensions (h*w) 1200*1500 mm; 1200*1000 m; 1200*600 mm; 600*600 mm; 400*400 mm. Windows are installed in casing boxes.
• The entrance door is wooden, paneled, solid (spruce/pine A). Size (h*w) 1800*800 mm (for one-story baths; 2000*800 mm (for baths with an attic). Handles, hinges. On front door a padlock is installed.
• Interior doors – bath, frame (aspen A). Size (h*w) 1750*750 mm. Handles, hinges.
• In window and doorways casing bars (swarms) are installed.
• Sealing of corners, joints, abutments - spruce/pine A/aspen AB plinth.
• Finishing windows, doors - spruce/pine frame A on both sides, aspen AB
• Nails for fastening parts are black construction nails.
• Nails for fastening the lining – galvanized 2.5x50 mm
• Nails for fastening plinths, layouts - finishing galvanized 1.8x50 mm.
• Loading, delivery up to 400 km from Pestovo, Novgorod region, unloading of a set of material.
• Assembly of the bathhouse at the customer's site.
• BONUS. Accessories for the steam room. Stones – gabbro-diabase 40 kg.

We have compiled for you a convenient table of differences in the configurations of bathhouses for shrinkage and turnkey.

The whole country rests on such workers

Alexey Gennadievich!!! Due to lack of time, I couldn’t write to you - thank you very much for the work of your employees in building the bathhouse, two young men, unfortunately, I don’t know their names, they worked clearly and harmoniously, the quality of the bathhouse is EXCELLENT!!! The whole country rests on such workers. All our friends and relatives also noted the impeccable work of the guys, which resulted in the bathhouse we dreamed of.

The guys built us an amazing bathhouse

I would like to express my deep gratitude to Alexey (general director), Sergey Zorin and Vladimir Chistyakov (builders)! At the beginning of August, the guys built us a stunning bathhouse, taking into account all our wishes. The delivery of materials was carried out on time, the construction was completed even ahead of the previously agreed time, the quality of materials and work is at the highest level. In general, just a fairy tale! I advise you to build only with Russian carpenters!

"Price quality"

The work is pleasing to the eye. Fast, high quality, on time. I thank the team of guys (Evgeny, Dmitry, Sergey) and General Director Alexey Roslov for the work done. I ordered a bathhouse with a 6x6 attic, project B-20, with minor changes, “for shrinkage”. All work was completed ahead of schedule and with high quality. All my wishes were taken into account. I was very pleased with Alexey Roslov’s attitude towards his work. He always promptly and competently answered all my questions and resolved controversial issues. The team, despite the young age of the guys, worked quickly and smoothly, and at the end they gave advice on caring for the timber and preserving it for the winter. Next year I will do the finishing with the same team. "Russian Carpenters" wins in all respects compared to other large companies. “Price-quality” is about them. Again Thanks a lot. I will recommend it to everyone.

Bathhouses are so popular that they are experiencing explosive growth. This is completely justified. For little money, the client gets more than just a bathhouse. He gets additional living rooms, which are never superfluous.

Bathhouse project 5x8 with terrace from the company SK Domostroy will be an excellent choice. It is especially suitable for those people who dream of such a universal building.

Unique advantages of a 5x8 bathhouse designed by SK Domostroy

A modern 5x8 bathhouse is a full-fledged house with a steam room. The first floor is dedicated to a classic Russian bathhouse. The second floor is living rooms. They can be equipped according to the client's individual order. Some people prefer to see bedrooms on the second floor. Someone makes one large room rest. Others set up a children's playroom.

The design of the house is intended for year-round use. A high-quality insulation system allows you to use the bath house throughout the year.

Construction baths made of timber with an attic are the optimal and economical solution unlike two-story baths. You get the same area, but cheaper, saving on the foundation and building material, and non-straight walls add personality.

Do you want to build a functional sauna? We provide for you various projects baths made of timber with an attic, designed taking into account all the requirements of operational and fire safety. This is an excellent choice for large families with the opportunity to comfortably spend their leisure time alone with nature. On one floor of this building there is a sauna, and on the second there is a relaxation room and a bedroom.

The advantage of a bathhouse with an attic floor

The timber is an ideal ecological building material, since it is highly reliable, and the construction of baths is carried out within two weeks.

A bathhouse made of timber with a turnkey attic is profitable investment finance in country cottage area. By building such a bathhouse, you will receive additional living space in which it will be cozy and comfortable at any time of the year.

Where to buy inexpensive bathhouses with attics?

In the online store " Dacha World» you can buy a bathhouse with an attic and order production according to an individual project.

The price of the finished project depends on the complexity of the design, the materials used and on the equipment of the building with the necessary communications. Sales and construction of projects are carried out in St. Petersburg and Moscow, as well as in the Central and North-Western regions.

Our specialists approach each project individually and use only high-quality profiled timber during construction.
After construction is completed, the attic floor is insulated. By ordering the construction of a sauna from the Dachny Mir company, you will not have to be directly involved in the construction of the building - our professional craftsmen will take it all into their own hands. All you have to do is agree on the prepared project and sign the contract. Immediately after the facility is put into operation, you will be able to enjoy your favorite water treatments.

The benefits of the bath were known back in ancient times. Since then, each nation has developed its own, ardently revered bathhouse tradition, and in Rus' bathhouses were a common feature of the rural landscape. Modern country life It’s also hard to imagine without the joy of visiting a bathhouse. On personal plot You can see both the now familiar sauna and the more exotic hammam. But, despite familiarity with the customs of other cultures, the majority prefer the traditional Russian bathhouse.

To please themselves with a good rest and increase their health, the owners build bathhouses of various designs and materials. Practical owners strive to build a multifunctional bathhouse, which could become not only a decoration of the site and a health center, but also serve as a additional functions. Bathhouses made of timber with an attic are more suitable for this than others.

Timber bathhouse 6.3x6.3 m with attic Source kos-brus.ru

Material selection

A bathhouse with an attic and a terrace is usually built from wood; the most common options are:

Log baths. Traditionally, bathhouses (and other buildings) in Rus' were built from chopped logs, the most available material. Such designs still exist, but they are not very common due to their features: labor-intensive manual processing logs, the high cost of quality logs, long drying times and significant shrinkage. Nevertheless, designs for bathhouses with an attic made from this material are presented in a wide range. A steam room made from hand-processed logs will be of better quality than one built from rounded logs (which, however, depends on the skill of the hired carpenters), but will cost 40-50% more.

Panel (frame) baths. They are valued for their speed of assembly and cost-effectiveness during construction - they do not need a massive foundation. But such a building needs high-quality insulation and finishing, the costs of which can offset the savings. Therefore, it is necessary to study well the designs and prices - with all the details - before choosing a bath house made of timber.

Bathhouses made of laminated veneer lumber. The main advantage of the material is minimal shrinkage, which allows you not to delay using the bath for its intended purpose. Ordering such a turnkey bathhouse with an attic is completed in the shortest possible time.

Attic bathhouse in Scandinavian style Source giropark.ru

Baths made of profiled timber. The building pleases the eye with the impeccable shape of the facade; At the same time, timber with natural moisture has its own characteristics. It can be significantly deformed when drying, become covered with cracks, and the shrinkage of the box in the first year will be 10–15%. Chamber-dried timber is more expensive (the price is close to a rounded log), but the risk of deformation is minimized, and shrinkage does not exceed 3–6%. This makes kiln-dried timber one of the most practical materials for building a bathhouse.

Advantages and disadvantages of a bathhouse with an attic

For such baths, instead of a regular attic, an attic floor is designed - a full living room with insulation and characteristic sloping walls. Such living space is interesting from the point of view of the emerging prospects, including:

Additional square meters. The most obvious advantage is that it allows you to use the room for different purposes. A 5 by 5 bathhouse with an attic can become a multifunctional structure. In addition, the room will be 30-35% cheaper than a similar one in a residential building, but will be just as comfortable. The mansard (sloping) roof, thanks to the vertical side gables, allows you to achieve maximum use area. Hip or gable roof less profitable because, due to the design features, it reduces usable space.

Interior of a guest room in the attic of a bathhouse Source assz.ru

Saving land. A bathhouse made of timber with an attic is a profitable solution if the plot is of modest size, and the owners have big plans for its arrangement. The saved space can always be put to good use.

Multifunctionality. With the acquisition of an attic, the possibilities of using a bathhouse expand significantly. The owners can set up a gym here (which would otherwise remain a dream), a cinema hall, and equip a recreation area with a billiard table and a minibar. For some, it is more important to organize a guest room or a home SPA center. A bathhouse with an attic and a terrace will also expand opportunities for outdoor recreation.

Originality. Historically, the design of an attic floor with a slanted ceiling line itself evokes romantic thoughts about a bohemian lifestyle; Therefore, it is especially pleasant to relax and communicate here. The unusualness of the situation can be emphasized by decorating the attic in the appropriate style. Luxurious oriental motifs, airy Provence with wicker furniture or the decor of a closed yacht club look impressive. The effect is enhanced by windows installed in the roof, a podium instead of a bed and light through shelving. If the choice fell on a bath house, projects with an attic are the most rational solution.

Source homishome.com

On our website you can get acquainted with the most popular bathhouse projects from construction companies presented at the exhibition of houses “Low-Rise Country”.

Bathhouse designs with an attic also have some disadvantages:

The issue of isolation. The top floor of a bath house with an attic needs careful protection from moisture, which is ensured by a layer of vapor barrier layer in the ceiling. The interlayer will retain thermal insulation and building structure without allowing it to develop mold fungi and microorganisms hazardous to health.

The issue of insulation. If you plan to use the attic floor year-round, you will have to thoroughly insulate it.

The issue of complicating construction. The steeper the roof slopes, the more space there will be underneath. usable area. The best option there will be a broken (attic) roof, but it will cost more.

Broken mansard roof- technically complex design requiring a professional approach Source bruskarkasdom.ru

Bathhouse with attic: features of projects and layouts

In modest-sized baths (3x4 or 4x4 m), it is unprofitable to install an attic floor; For them, expansion by arranging a terrace or veranda is suitable. However, bathhouses with an attic and veranda are of particular interest. You can save money on construction if the bathhouse has dimensions of 6x4, 6x6, 6x8 m and larger. In this case total area can reach 60-80 m2, and the project provides for:

On the first floor: open terrace, hallway, dressing room (rest room), washing room and steam room. It is more convenient to place the stairs to the second floor in the hallway so as not to clutter up other rooms.

On attic floor: hallway, recreation room (or room with another purpose), storage room.

Balcony. A 6x6 (or larger) project may also include a balcony. Many owners like the idea of ​​space for summer holiday with leisurely tea drinking in the fresh air.

Turnkey bathhouse with attic - project with a balcony and veranda Source lestorg32.ru

On our website you can find contacts of construction companies that offer bathhouse design and construction services. You can communicate directly with representatives by visiting the “Low-Rise Country” exhibition of houses.

The most popular option is a 6x6 turnkey bathhouse with an attic, which is inexpensive and allows you to comfortably accommodate a family or a noisy friendly company. The design of a bathhouse may vary from project to project, for example, a dressing room is often combined with a recreation room (if the attic is intended for other purposes). The remaining rooms are equipped as follows:

Waiting room. You can allocate a small auxiliary room in it, which can be used as a dressing room and/or a storage room for firewood.

Steam room. A two-tier shelf and a suitable-sized sauna stove are installed here. Windows are traditionally made small.

Washing room. Usually a shower tray, a wooden (oak, larch or cedar) or plastic (with antibacterial coating) font is installed.

Steam room in a timber bath Source giropark.ru

Restroom. Perfect for complete relaxation would be better suited wooden floor, dim diffused light, comfortable furniture and pastel colors.

Bathroom. Modern requirement for comfort; for a full bathroom, 1.5-2 m2 is enough.

Pool. The dream of many bathhouse owners. By giving up the terrace and slightly reducing the area of ​​other rooms, you can treat yourself to such luxury.

Terrace. If it is glazed, it can be used for relaxation during rainy and cold seasons. As decorative element Lanterns look good here.

Video description

What a turnkey bathhouse with an attic and veranda looks like is shown in the following video:

Attic floor: construction features

A turnkey bathhouse with an attic will be inexpensive compared to a full two-story structure. Customers are attracted by the opportunity to save money without losing convenience and functionality. It is best when an additional floor is planned during design, then the calculation of load-bearing structures will be as accurate as possible. Otherwise, inevitable difficulties will arise with adding a staircase (most likely, a screw model will be successful) and windows (it is inconvenient to install windows in some types of roofs).

t600359-08

Project of a bathhouse with an attic made of laminated veneer lumber Source lineyka.net

Stairs to the attic

Owners who build an attic bathhouse on their own often go to two extremes when building a staircase. It turns out to be either prohibitively large, and then eats up precious space, or (with the best intentions) prohibitively steep. The descent along such a structure turns into an entertaining, but fraught with injury attraction. And if the exit point of the stairs rests on a sloping wall, then you should also take care of your head.

There are several ways to make a staircase not only functional, but also a comfortable (and preferably beautiful) interior detail. Of all the variety of bath stairs that exist in nature, the following options are familiar:

Marching staircase. Depending on the allocated area, it can be one- or two-flight. Such designs are the most familiar, easy to manufacture, and therefore most common. There are marching staircases on stringers, bowstrings or rails; The main thing for them is the correct calculation of the parameters of the steps and the distances between them.

Classic two-flight staircase Source beautycontraception.ru

Spiral staircase. A winning option for a bathhouse, as it takes small area, costs less and looks very impressive. Compared to the marching one, screw design has a steeper ascent angle and a smaller width of steps, which is potentially more dangerous.

The recent trend has been the construction of a wooden single-flight staircase with a steep angle (35-45°) and proportions tied to medium length step. This option, borrowed from the construction techniques of the Scandinavian countries, makes it possible to make the stairs to the attic as comfortable and safe as possible.

Video description

About the construction of an attic bathhouse from profiled timber in the following video:

Communications

The classic Russian bathhouse had no communications and, like all medieval buildings, was heated in a black way. Firewood was brought from a neighboring forest, and water was taken from a river or well. Modern bath house - projects with an attic and ordinary steam rooms are connected to all communications, which allows you to enjoy the process in comfortable conditions. All necessary networks are provided for at the design stage and include:

Water supply. The source can be a centralized or autonomous system, well or well. Sometimes a large storage tank is installed.

Electricity. Electricity is used for more than just lighting. It feeds the boiler, pump (if the supply water is coming from the well), electric furnace and Appliances, from the kettle to the TV. IN modern projects Warm floors are often installed.

The forced ventilation system also runs on electricity Source banyabest.ru

Gas. Instead of an electric boiler, you can install a gas boiler. Heating water will be more economical, but you will need to invite a specialist to install the boiler.

Sewerage and drainage system. If central system absent, a septic tank is used for drainage.

Ventilation. A system that increases the service life of a building and maintains the necessary sanitary standards; It can be natural (through an open window, which is often not enough) and forced. Ventilation is needed not only in the steam room, where steam accumulates, carbon monoxide from the stove and carbon dioxide exhaled by people. Air circulation is important both in the rest room and in the washing room with shower.

Video description

About the attic bathhouse with an area of ​​60 m2 in the following video:

Heating. A properly designed and constructed bathhouse allows you to avoid additional heating, limiting yourself to the heat of a brick or cast iron stove. If desired, in winter time additional funds can be used. The simplest and most effective will be electric heater. You can also use radiators, heated floors (water or electric), gas and electric convectors.

Baths with an attic: standard and individual projects

To build a bathhouse, the owner suburban area no need to rack your brains, inventing the outlines and structure of the future building, choosing and purchasing materials, raising walls and laying engineering Communication. A specialized construction company will help you choose a suitable project, carry out all the work competently and save the owner time, nerves and finances.

Typical design of a bathhouse with an attic and a terrace Source rozarii.ru

Companies offer bathhouses with an attic made of turnkey timber, the designs and prices of which are aimed at a wide variety of tastes. Choosing a standard project allows you to immediately begin construction and after a few months (if the bathhouse is made of glued or dry profiled timber) to test the bathhouse in action. A custom project will require consultation with an architect and additional time (and money) for development. The decision to build a turnkey bathhouse with an attic has several important advantages:

The bathhouse will be built on a site of any complexity.

You will get a bath within the period specified in the contract.

The design will reliable and durable, since the builders have extensive experience and use proven assembly technology.

Glazed terrace of a bathhouse made of laminated veneer lumber Source giropark.ru

When ordering a project you can often get special offer: free antiseptic treatment of the subfloor and lower crown, brick panel for the stove or metal door For a present.

Many organizations allow some changes in standard projects (changing the location of doors and windows) at no additional cost.

The most popular solution for big family or a friendly company is a bathhouse project measuring 5x5 and 6x6 m. The steam room in such projects is designed for 4-5 people, and the relaxation room for 7-8. An additional plus is that it is easier for a square building to find a place on the site, and the attic allows you to get a comfortable multifunctional space without taking up valuable land.

Individual project of a timber bath Source ecoterem-spb.ru

Bathhouses with an attic on a turn-key basis: asking price

The opportunity to get “two in one” - a full-fledged living space that can be used at your discretion, and a bathhouse made according to Russian traditions attracts everyone more people. These buildings are different convenient layout and tall performance characteristics; Choosing a suitable project from a wide range will not be difficult. Prices timber baths with an attic in the Moscow region look like:

Baths 4x6 m: from 245-260 thousand rubles.

Baths 5x5 m: from 265-270 thousand rubles.

Baths 6x5 m: from 280-295 thousand rubles.

Baths 6x6 m: from 320-350 thousand rubles.

Conclusion

For most people, a bathhouse is the most affordable and enjoyable way to relax from the hustle and bustle. modern life, chat with friends and join in the healing procedures proven by the thousand-year experience of our ancestors. Such a vacation will be especially successful if the timber bathhouse has an attic. Guests staying for the weekend will appreciate the advanced features this design provides.