Many owners of private houses or apartments choose a counter and bar stools for their kitchen, because this option looks more interesting. However, in stores it is not always possible to find furniture that completely suits your taste, decor, and style. Some manufacture bar stools from profile pipe or from other materials with your own hands. You can cope with such work quite easily, you just need to follow certain rules.
The easiest way to create a bar stool is using plywood or wood.
For the manufacture of homemade chair you need to prepare the following:
It is also necessary to prepare the selected materials - plywood or wood. Some people make metal bar stools with their own hands, but such work is much more difficult. In the process of making furniture, a diagram or drawing with exact dimensions is used, otherwise there is a chance of making a mistake and damaging the product. Focusing on certain dimensions, you will be able to find out exactly how much wood or metal you will need and prepare the required amount of materials.
The height of the chair is usually determined based on the distance from the floor to the bar counter itself. The distance from the tabletop to the chair is most often about 35 cm.
Among wood materials The most accessible forests are birch and pine. You can use some elements of old furniture.
Cut out the following parts:
The small circle will be used to make a backing, and the large circle will be used to make a seat. Make sure the direction of the wood grain in the legs is vertical. Then start assembling the furniture using self-tapping screws. Connect the legs to each other and to a small circle, screw the large circle to it, then screw the stiffening ribs. Tint the furniture using stain and wait until the chair is completely dry. Apply varnish to the surface (two or three layers).
Another variant wooden chair slightly different. It is very simple to make and convenient to use. The seats of these bar stools can be upholstered in fabric, bent or straight.
The procedure is as follows:
To create a recess in the seat, you need to cut it out on the surface and then plan it using a chisel. Then the seat needs to be sanded and connected to the legs, and then the entire chair needs to be sanded. As a finishing touch, it must be applied to the furniture. paint material.
If there is a need to stylize wooden furniture antique, you can use special products for aging.
Another functional option is a bar stool with a recess and a backrest. This way the furniture will be as comfortable as possible.
For the back you will need additional blanks.
A metal chair is reliable and durable furniture. In the process of work they are used metal profiles, sheet iron, various trimmings.
You can create it yourself beautiful furniture from metal pipes. This chair will fit perfectly into loft style rooms. The furniture body itself is made from pipes. It's better to opt for chrome of stainless steel. PVC or plastic to choose for similar products not worth it, since these materials are not as strong as metal.
Prepare the following:
To make a chair, follow the instructions below:
Many people prefer to further decorate chairs they have created with their own hands, regardless of what material they are made of. One of the most popular decoration options is the use of fabric. First you need to decide on the shade and type of material, and you should focus on general design kitchens. To decorate chairs, tapestry, furniture silk, microfiber, and jacquard are often chosen. Some people prefer to decorate furniture using various decorative elements, paints, paper, glue.
One of the most original methods decoration is decoupage, which allows you to turn even the most daring design ideas into reality.
Can be picked up different materials for decoration and with the help of decor, make an ordinary chair turn into a real work of art.
Every person wants to arrange their home in the best possible way. For this, people make stylish and original repairs and arrange the furniture. Furniture items can not only be purchased ready-made in stores, but also made with your own hands.
The second option is distinguished by saving money, exclusive designs and a wide range of imagination.
Bars appeared on the market not so long ago, but have managed to become popular and in demand among owners of spacious kitchens or dining rooms, where in addition there is also a bar counter. Most often, they are found in spacious private homes, where there is enough space for their installation. free place. If you are lucky enough to become the owner of such a home, then you should definitely place several original and exclusive chairs near the bar counter, which will become the main decoration of the room.
To the main advantages self-made furniture items should include:
Concerning design features, then there are bar stools different forms, designs, sizes and materials of manufacture. Based on the types of structures, they are divided into models:
Advice: if you are just starting to master the profession of a furniture maker, opt for a stool.
You can make a bar stool from wood or metal. Metal constructions Suitable for those who know how to work with a welding machine.
But to collect wooden product Almost every person can do it, having a little experience in carpentry and a great desire to make furniture with their own hands.
Furniture from natural wood will bring a special atmosphere of home, warmth and comfort into the interior. It will delight owners not only with its environmental cleanliness, but also with interesting shades, textures and textures.
When choosing wood, there are several factors to consider. Namely, that by type the whole tree is divided into:
Attention: in addition to the strength of wood, it is also worth considering its resistance to moisture. Even hard varieties of trees do not always withstand increased moisture, and upon contact with it they swell and lose their original appearance.
Soft wood is the easiest to work with. But it does not have a long service life and high technical qualities. A chair made from soft varieties will serve its owners from 10 to 15 years. But this best option for beginners in carpentry. If you already have experience self-assembly chairs, it is better to use more expensive types of wood, for example, oak, beech, ash. Such chairs will serve you and your family for decades, and will delight you with their aesthetics and ease of use.
You can make a bar stool from different breeds trees. The most popular and popular are:
Before you start creating a drawing, you need to decide on the design and type of construction of the future chair. At this stage we think about:
After this, the optimal option for creating a drawing of a bar stool is selected. And you can do this in different ways:
Which option to choose is up to you. The main thing is that the design of the bar stool is thought out correctly. After all, its comfort in operation will depend on this.
Although there are many options for creating a bar stool design, it is worth considering the following factors. Namely, this piece of furniture must have certain dimensions:
It's just symbols. If the bar stool seat has a round or oval shape, its dimensions will differ significantly from those indicated above.
Also, when creating a drawing, it is worth considering that the seat can be either hard or soft. To make a soft seat, you will need to additionally prepare the following materials:
The tools we need are:
The materials that will be used in the work process are::
Making a bar stool, like any other piece of furniture, begins with sawing the parts. We will need to prepare the following individual elements:
Reference: the small circle will be used as a base, the large circle as a seat.
After preparation individual elements bar stool, you can start assembling it. All parts are assembled with self-tapping screws, and To give the product strength, you can use PVA glue. The bar stool assembly process will look like this:
We looked at the simplest option for making a bar stool from natural wood with your own hands.
If you want to make a recess in the seat, you need to cut it out on the surface, and then plan it using a chisel. Next, the seat is sanded and covered with paints and varnishes.
The seat of a bar stool can be made soft. To do this, foam rubber with a thickness of at least 3 cm is glued to plywood or boards, and upholstery fabric is nailed on top using a stapler.
After making a bar stool, it needs to be decorated. Each craftsman chooses his own version of decorating a piece of furniture made by himself.
Some just cover wooden surfaces stain and varnish or paint. Some people like to carve the legs and back of furniture, while others prefer the decoupage technique.
The easiest way to decorate a bar stool is with fabric. For these purposes, materials that are resistant to moisture and dirt are selected (tapestry, leather, leatherette, jacquard, microfiber).
It is not at all necessary to bother yourself with reupholstering furniture; sometimes it is enough to simply sew covers on it. This way you can update the interior of the room from time to time by creating new covers. When choosing fabric for decoration, it is important to consider the overall interior of the kitchen or dining room. The chair should fit harmoniously into the surrounding environment and be its main decoration.
Ideas for decorating the resulting furniture and its use can be seen in the following photos:
The detailed process of manufacturing, assembly and decoration can be seen in the following video:
In conclusion, it is worth noting that all bar stools are unique and inimitable in their own way. They are able to bring a special atmosphere of warmth and harmony into the interior. A self-made chair with your own hands will become not only a decoration for the kitchen or dining room, but also a source of pride among your family members and guests.
In contact with
1. Characteristics of a bar stool.
2. Tools and materials.
3. Manufacturing sequence.
Bar stools are a convenient accessory for tables with a height of more than 850 mm. Outwardly, they may look similar to ordinary stools, but only with elongated legs. The height of the chair should be 300 - 350 mm lower than the level of the tabletop.
The remaining parameters (width, length, height of the legs, presence of a backrest) are adapted to the user’s wishes and the design of the room. Let's look at how you can make a bar stool with your own hands from timber, which, for example, can be purchased at hardware stores.
Owners of spacious homes, both apartments and houses, have the opportunity to add comfortable and beautiful elements to the interior. Thus, bar counters are very popular.
Such racks require unusual places for sitting. The length of which should be much higher than the average stool. A similar chair can be purchased at furniture store, or you can make it yourself. This process has many advantages over the store-bought one:
There are two possible ways to make a stool:
The first option has more advantages over the second:
Any natural wood material has its own characteristics in terms of density and happens:
Products made from dense materials will last for almost several generations; they become very durable and reliable. But for a beginner in this business, soft ones are also suitable, you just have to take into account that their service life will not exceed 15 years.
Before starting work, you should accurately determine the design of the stool, put it on paper or produce it electronically for your convenience.
The standard conventional dimensions for all such chairs are:
To assemble a wooden stool you will need:
To assemble the simplest bar stool made of wood, you will need to connect all the prepared parts together using self-tapping screws, and to better secure them, apply PVA glue.
The assembly process includes the following sequence:
Note! If you wish, you can make your stool soft; to do this, you need to put foam rubber on the seat, cover it with the selected material, which is fixed with reverse side stapler.
This is how you can very quickly and quite easily make a comfortable, beautiful bar stool for your counter.
A regular bar stool made from walnut and iron with a seat.
The main detail of this homemade product is its shape, for easy welding and strengthening of pieces of iron. If you're brewing for the first time, this project will get you very familiar with the activity and will help you become a great brewer.
Part 1: Let's start production.
We cut the metal into 4 parts of 23.2 cm by 54.5 cm.
Everything was fastened to the side joint and secured with screws, so they formed 20 cm. square pipe 58.5 cm.
Part 2: Base in the form of an angle to fit the mold.
The pieces themselves had to be cut beveled so that everything would fit.
Using a tape measure, we will find a suitable angle and set it so that everything matches. The pieces of lumber were passed through the saw so that if necessary, there would always be a beveled edge.
Part 3: End of the basic part.
We attach the beveled base with plywood and nail it with an edge. This part is not connected to the pipe, so it can be removed if necessary.
Part 4: Mark and cut off future legs.
We mark and cut off the lower part of each leg first. To mark, we hang the corner of the mold over the edge of the table and secure the metal part in place.
When cutting pieces of legs, everything is placed in the mold and then the upper ends are also marked.
Part 5: Upper part of the chair.
The top part of the bar stool was made with 4 iron corners.
Everything was marked using a square made earlier and an ordinary stationery pen.
We glue the resulting pieces together and then remove them from the mold to adjust the precise weld on each side.
Part 6: Vise.
Part 7: Footrest.
The pieces turned out to be 30 cm long and at an angle of 45 degrees.
Part 8: Finishing the welded parts and sanding them.
Metal pads were welded underneath each leg.
Now sand everything down with 40 grit sandpaper.
Part 9: Location.
The main part of the mode is on two thickened boards.
All boards are sanded using sandpaper.
Sand the beveled edges with sandpaper grit 100 to 220.
Part 10: Painting.
