Stairs. Entry group. Materials. Doors. Locks. Design

Let's try to figure it out practical nuances this process.

In what cases is it necessary to paint skirting boards?

Many readers believe that painting ceiling skirting boards is done only in cases where it is required interior design premises. That is, this procedure is purely aesthetic in nature.

But there is a rather important point here. Painting ceiling skirting boards significantly strengthens them and allows you to hide small scratches and dents that often appear during the process. installation work or during transportation of products.

As a rule, the natural color of foam baseboards is white, which means that after a certain time the material will begin to turn yellow or become covered with dust and acquire a grayish tint. Painting protects them from such troubles.

Practice shows that painted foam ceiling plinths have a longer service life than those without painting.

Thanks to this factor, you benefit economically, even despite the additional costs associated with purchasing painting materials.

If you still have doubts whether you need to paint ceiling plinth foam, find photos of rooms with painted and natural fillets, and then compare them. In most cases, users choose the first option (painted skirting boards).

When and with what to paint

Even a person without experience in performing repair work will say that painting ceiling fillets is much more convenient before installing them, right?

In this case, there is no need to constantly move the stepladder from one place to another and work in an awkward position. Another positive point– during the painting process you will not stain the walls and ceiling.

On the other hand, after installing painted foam baseboards, gaps usually form (due to uneven surface walls and ceiling), as well as joints between in separate parts fillets. They need to be sealed with putty and painted again.
Considering the above arguments, we can say that the choice of method for painting ceiling skirting boards depends solely on your personal preferences.

Important point! When choosing paint for foam baseboards, carefully study the information about it. Do not use formulations that contain solvents. Polystyrene foam is a very “delicate” material, designed for the use of paints on water based.

Experts advise buying the following types colors:

• acrylic;
• latex;
• polyvinyl acetate.

If you cannot find the paint of the desired color, make it yourself using a white solvent-free composition and the necessary dye.

To paint foam ceiling fillets you will need:

• brush;
• putty knife;
• capacity;
• dry rag;
• paint the desired color.

Quite often, the design of a room stipulates that the ceiling and baseboards should be the same color.

In this case, before you start painting, be sure to cover the floor with film and thick cardboard. This is necessary to protect flooring from paint and marks left by a stepladder.

Having figured out how to paint the ceiling plinth, you need to pay a little attention to the tools that are used to perform the work presented.

To paint embossed skirting boards, it is better to use a thin brush, which allows you to apply the paint evenly even on very complex patterns. For a smooth surface of ceiling fillets, a wider brush is suitable.

When painting installed ceiling skirting boards, be sure to use wide spatula.

It is needed to prevent paint from getting on the walls and floor. Right hand you paint the fillets, and with your left hand, hold the spatula at an angle to the baseboard (the paint gets on the spatula). For these purposes, you can use a piece of plastic or thick cardboard.

Preparatory stage

Before you begin painting the installed foam ceiling skirting boards, you must carefully prepare them for this procedure.

1. 1. Prepare tools and materials (trowel, dry rag, sandpaper, water, putty and silicone sealant).
2. 2. At the next stage, joints, cracks and mechanical damage to the baseboards are sealed. To eliminate defects in the corners of the room, apply the putty with your finger (work with gloves!).
3. 3. Excess putty is wiped off with a wet rag.
4. 4. When everything is dry, you can clean out the uneven areas using sandpaper for this purpose.

If you have completed preparatory work, following the instructions provided, then you can safely start painting.

Painting

IN in this case you will need a place with low humidity, without drafts, so that there is no direct sunlight.

It allows you to paint quickly and much better than using a brush. In order to prevent streaks from appearing on the baseboard, try to keep the can of paint at a distance of 30 cm from the surface to be treated.

Before you begin painting the installed foam baseboards, you must thoroughly clean them of dirt and dust.

To prevent paint from getting on the ceiling and flooring, it is best to use masking tape. Fix it as close as possible to the fillets so that there are no gaps between the tape and the baseboard.

The painting process will be much easier if you decide to make the ceiling and fillets the same color. The first one is painted with a roller, and the baseboard with a brush. After the paint has dried, you need to repeat this procedure.

Important point! Ceiling plinths are painted in at least two layers, regardless of the type of paint, the chosen method of work and other factors. Otherwise, in a few months you will have to paint the ceiling skirting boards again.

If, according to the repair plan, your ceiling and fillets should be different color, then, first of all, the ceiling is painted. In this case, as already mentioned, it is necessary to use masking tape, which will prevent the paint from getting on the ceiling.

Non-standard methods of painting ceiling fillets

Lovers original ideas When it comes to interior design, you will definitely be interested in non-standard methods of painting ceiling skirting boards.

For example, fillets with large, relief patterns can be given the appearance of a stone surface. To do this you need:

1. 1. Glaze of the appropriate shade is applied to the surface of the baseboard.
2. 2. Using a brush, make small light strokes.
3. 3. The surface is covered with dark spots (Umber glaze is used).
4. 4. Small strokes of dark shades are applied.
5. 5. All excess is removed from the surface of the baseboard.
6. 6. After everything is dry, touches of a bronze shade are applied.
7. 7. The fillets finally dry out and become like a stone surface.

A good designer will definitely figure out how best to combine these ceiling plinths with other design elements of the room so that it acquires a harmonious and original look.

Thus, painting foam ceiling plinths turns into a real art. You have the opportunity to get not only the “stone effect”, but also other interesting colors and shades:

• Malachite.
• Patina.
• Gold.
• Aged wood.

But do not forget that the listed options can only be used if they “fit” into general design premises. “Golden” or “malachite” skirting boards are unlikely to be suitable for a room decorated in a modern style.

In the process of preparing ceiling plinths for painting, you can use a vacuum cleaner to remove dirt and dust, construction hair dryer to remove old paint, and a “grinder” or drill to eliminate unevenness on walls and ceilings.

Before using masking tape, be sure to check how firmly it adheres to the surface. It's possible that when you remove the tape, it will pull out fresh paint, decorative items, etc. In such situations, it is better to use a regular spatula or cardboard to protect the floor and walls from paint.

Even if the natural color of foam baseboards suits your space perfectly, it is better to paint them white too. This will protect the fillets from dust and yellowing due to ultraviolet radiation.

After studying this topic, you know what and how to paint the ceiling plinth so that this procedure is successful and your room becomes more comfortable and attractive. You are also convinced that this type of repair work is rightfully considered simple and does not require special skills or education.

Even a small renovation can dramatically change the entire look of a room, and painting the baseboards is one of those small but interesting touches that will allow you to amazingly transform a room or create a complete updated look after renovation. Painting skirting boards (floor and ceiling) is considered the final touch in repair work, however, it is recommended to paint them before wallpapering or painting the walls, so as not to stain them. There are certain nuances to how to paint a baseboard correctly, so we suggest you read this material to the end and use the recommendations below to get the job done efficiently and quickly.

First of all, to paint the baseboard, we will need:

Primer– you can use acrylic primer
Dye– alkyd or acrylic, aerosol or regular
Brushes if you use regular paint rather than spray paint
Acrylic clear varnish– it will protect the painted wooden surface from damage, and also adds depth to the color and shine of the new coating
Respirator and gloves for protection while working
Solvent for degreasing the surface before painting (you can use white spirit, kerosene or special degreasing compounds)
Cloth napkins or just dry clean cotton rags
Masking tape and paper or covering film
Very fine grit sandpaper
Spatula and putty, best car, you will need it if you plan to remove deep scratches or chips.

Why do you need to paint the baseboard?

3 Hide the joints. Often, when joining skirting boards, gaps or irregularities remain that can be successfully hidden with putty and paint.

4 Protection. Painted with paint or varnish wooden skirting boards, you will protect them from pests and wear.

5 Decoration. You can also paint the baseboard so that it matches the color of the ceiling or walls and fits harmoniously into the overall interior of the room.

How to paint the baseboard?

Skirting boards made of polyurethane, duroplymer, and foam require a special approach, since this material does not tolerate the ingress of any solvents. In this case, use only acrylic, latex or water-based paints. For plastic skirting boards Acrylic spray paints are ideal or special paints for plastic. As experience shows, it is most convenient and best to paint skirting boards that have not yet been attached with spray paint, but if the skirting board is already attached to the wall, then it is better to use regular paint, since the use of aerosols may damage walls or ceilings. For those who are serious and sensitive about the interior of their home, we advise you to pay attention to tinting varnishes (glazes) for wood - they are perfect for finishing and decorating unpainted wooden baseboards. This tint varnish is sprayed from a can, then rubbed with a sponge or brush over the surface. In addition, you can use textured paints, for example with the effect of natural stone.
Knowing now what to use to paint the baseboard, you can do this job yourself.

Step-by-step instructions for painting baseboards at home

Step_2 Eliminate installation defects using silicone sealant or fine-grained putty. Apply putty to a rubber spatula, cover any errors (joints, corners, dents, scratches), trying to follow the curves of the profile.

Step_3 Excess materials for covering cracks, joints and minor scratches remove with a damp cloth.

Step_4 Wait for it to dry completely and remove any unevenness with sandpaper.

Step_5 Clean the baseboard from dirt using warm water and sponges.

Step_6 Degrease the surface using any solvent (acetone, white spirit or a special degreaser).

If you are painting a fixed baseboard, then to use spray paints you will need to cover the walls and floor at a distance of at least half a meter from the baseboard.
If you are painting with a brush and regular paint, use wide masking tape around the perimeter of the baseboard to avoid paint smears on the walls and floor, or use a wide putty knife or a sheet of cardboard to cover the wall when painting the edges of the baseboard.

Step_9 Let the first layer dry, then apply the second and subsequent layers (if required).

Step_10 After painting, you can coat the surface of the baseboard with varnish to give the paint a deeper color and protect it from abrasion and damage.

1 With the help of aerosol cans, paint is applied more evenly and efficiently, the surface is perfectly smooth.

2 Water-based paint, which gets on the wallpaper, is easier to wash off than other types of coloring paints and varnishes.

3 Use only high-quality materials when working at home.

4 Painting a textured baseboard with a roller will be difficult, so use brushes or spray paint.

5 Working with acrylic sealant is much easier because it washes off without any problems.

So, we tried to highlight the main important points in painting skirting boards, all that remains is to pick up the paints and get to work. A skirting board that you painted yourself will not only allow you to get a unique room design, but will also give you an emotional charge directed towards the future. Surely, more than once, glancing around the room, you will remember how you adjusted and painted the baseboard with your own hands, feeling like an artist and designer!

If you found this article useful, please rate it (at the top of the page). Thank you!

Visitors to this page most often choose from the online store:

Installing and painting the ceiling plinth often becomes the final touch in the renovation, when the walls, floors and ceilings are already decorated with a new finish. But some people prefer to do this work before finishing the walls so as not to stain the wallpaper. Regardless of the order of work, the question ishow to paint ceiling plinthand is it worth doing it at all?, remains open.

Why paint the baseboard and when to do it

Arguments in favor of coloring

Ceiling fillets made of polystyrene foam, polystyrene or polyurethane, which are commercially available, are most often white. If the ceiling in the house is also white, people often think: is it necessary to paint the ceiling plinth at all?

We answer: it is necessary! And we'll explain why.

• Skirting boards made from the listed materials often have small dents and scratches that will be visible in bright light.
• These same materials have a rather loose structure, are slightly translucent, and paint will give them strength and a more solid appearance.
• Over time, the unpainted material from which the ceiling plinth is made may turn yellow or simply darken from dust. It will be difficult to clean, while painted fillets can be easily washed with a damp cloth.
• The most important: It is impossible to glue the baseboard without joints, and they are very noticeable, especially in the corners. Therefore, before painting the baseboard, the joints are sealed, and a layer of paint completely hides them underneath.
• Wooden skirting boards also need painting, varnishing or impregnation. This will make them more beautiful and protect them from pests.
• Finally, in any case, the baseboard will have to be painted if you want to give it a certain shade, to “make friends” with the color of the walls or ceiling.

When is the best time to paint the baseboard?

But after installing the skirting boards, you will still have to seal and paint over the joints, and it is not a fact that this will be done accurately. Therefore, decide for yourself whether you need to paint the baseboards before installing them.

In our opinion, this should be done locally. It may be more difficult, but the result will be more complete and accurate. And if the color of the baseboard and the ceiling are the same, then the best option is to paint them simultaneously before gluing wallpaper or other wall finishing.

Advice. If the ceiling plinth needs to be primed before painting, then this procedure can be carried out just before it is installed in place, even without adjusting the fillets to size.

How and with what to paint the baseboard

Selection and preparation of paint

It is very important to understand what paint to paint the ceiling plinth. Products made of polystyrene foam and polyurethane literally dissolve under the influence of white spirit and other solvents, so for them you should choose only water-based paints - water-dispersion, acrylic, latex.

If you still decide to paint first and then install the fillets, then paint for the baseboard can be in a can - the work will be done very quickly and accurately, without streaks or drips.

Advice. If you need paint of a certain shade, but could not find it on sale, then buy white and tint it yourself or use this service at any large hardware store.

Preparing for coloring

Before painting the ceiling skirting boards, it is necessary to eliminate all installation defects. These can be not only the joints of adjacent fillets and corners, but also scratches and dents on the baseboard itself.

To do this, you can use any fine-grained finishing putty or white silicone sealant. For wooden baseboards it is better to use wood putty.

Preparation for painting skirting boards consists of the following steps:

1. Prepare any of the above materials, a sponge or soft cloth with water and a small rubber spatula. Instead, you can use any flexible plastic plate.
2. Apply putty on a spatula and cover the joint moving along the seam - from top to bottom. Press the spatula firmly against the baseboard, but not too hard, trying to follow all the curves of the profile.
3. Excess putty delete with a damp sponge.
4. It is more convenient to seal joints in corners by applying putty or sealant to the tip of your finger. In this case, you need to work with gloves.
5. If there are gaps between the baseboard and the wall or ceiling, they also need to be sealed.
6. Wait Allow the putty to dry completely and smooth out any uneven surfaces using the finest sandpaper.

If the paint for the ceiling skirting boards is already ready, you can start painting the ceiling skirting boards.

Painting methods

Painting ceiling plinths is the simplest thing and does not require special skills. But the technology itself depends on at what stage of finishing you decided to do this work.

Important! Before starting work, the plinth must be thoroughly cleaned of dust, or even better, primed.

Please pay attention to the following nuances:

• If you are painting a plinth that has not yet been mounted or has been installed on a wall that has not been pasted over, you can use both spray paint and a soft brush. Before painting the baseboard on the floor, cover it with film or paper so as not to stain it.
• If the floor and walls are already finished, they need to be protected from paint. To do this, stick masking tape along the baseboard, being careful not to leave open areas. Although fresh water-based paint can be easily wiped off with a damp cloth, the wallpaper may be damaged.

• If you are afraid of ruining the wallpaper with tape (if it is peeled off, they may also move away from the wall or lose their decorative coating), then there is another way to properly paint the baseboard. Take a wide clean spatula or a sheet of thin plastic or cardboard and apply it to the wall while painting the corresponding area.
• After applying the first coat of paint, you need to let it dry. If the joints are not visible through the layer of paint, and you are satisfied with the result, then painting the ceiling plinth can be considered complete. If this is not the case, then the procedure must be repeated again.

When the finishing work reached its final phase, it was time for the final touch in the interior design - installing and painting the baseboard. We will look at how to paint a floor plinth in a suitable tone and choose a paint so that there is harmony in the interior.

A floor plinth is needed to close the gap between the wall and the floor around the perimeter of the room. In addition, today almost all skirting boards have a cable - a channel that allows you to place cables in it.

There is currently a huge range of materials for skirting boards, but we will consider only those types that need to be painted.

Types of skirting boards for painting

Wooden– environmentally friendly building material, strong, resilient, easy to maintain, durable, and has a respectable appearance. They are installed mainly on parquet, wood and in dry rooms.

MDF– made from compressed wood fiber, mounted mainly on laminate, linoleum, and other floor coverings. Beautiful, does not fade from sunlight, environmentally friendly, resistant to pollution, easy to clean, easy to care for, but fragile from a strong impact, inferior to wood in terms of durability.

Manufacturers offer ready-to-install MDF products or unpainted planks, the color of which you can choose and paint yourself.

Before considering how to paint a floor plinth, let’s decide on the range of paints and varnishes for this work.

Paint for floor skirting boards

When applied, alkyd paints (enamels) form a durable and dense water-repellent film on the surface that is resistant to mechanical damage and detergents.

They should be applied to a dried baseboard, since otherwise, when the fillet dries, bubbles will appear on the paint layer, which will lead to peeling of the painted layer. The drying time is short, but a significant drawback is that these materials have an unpleasantly pungent odor.

Acrylic enamel is a water-based composition, so the surface of the treatment breathes. In addition, it is moisture-resistant, odorless, easy to care for, does not dry for long, and is characterized by durability and fire safety properties.

The list could go on for a long time - these include polyurethane varnishes and paints, oil paints are still in use today, all kinds of varnishes and other modern paints and varnishes. To highlight the texture of the wood, you can simply coat the product with alkyd varnish, if desired, pre-impregnated with stain.

Painting wooden baseboards

Let's look at how to paint a wooden floor plinth. First of all, you need to prepare everything you need for work.

• Wooden plinth;
• Brushes;
• Composition for primer;
• Masking tape, sandpaper;
• Sponge or rags, gloves.

We protect the surface of the walls and floor near the baseboard with masking tape, sticking it around the perimeter. If you work very carefully, you can place a wide spatula in the areas of painting and move it as the work progresses.

First, sand the planks with sandpaper to remove all roughness and minor defects, then the paintwork will lie evenly on the fillet.

To ensure that the paint adheres well to the surface, prime the fillet for better adhesion of the wood and paintwork materials.

Paint with a brush; the paint should be applied in a thin layer so that there are no smudges. After it dries, apply a second layer. Remove the tape only after it has completely dried.

Painting MDF skirting boards

After installing the planks, we move on to painting them. To protect the wall finishes and floor coverings from accidental contact with paintwork materials, it is better to protect them with masking tape. It wouldn’t hurt to also cover the floor with a film to prevent accidental drops. Wear gloves on your hands.

MDF planks are a porous material by nature, so they require a little preliminary preparation of the surface so that its fibers do not rise when painting. This can be eliminated by sanding the surface with fine sandpaper to remove lint.

Then the primer composition should be applied twice. The second layer of primer is applied after the primary layer has dried completely and has been sanded again. As a result, you will receive a high-quality surface for applying the selected paintwork material.

We will paint with a brush - select the size based on the height of the MDF fillet. Paint in a thin layer to avoid smudges. We wait for the paintwork to dry and repeat painting the planks a second time.

Alternatively, the fitted planks can be painted prior to installation. All preliminary steps to prepare them for painting are the same, but you can paint them with spray paint - everything is at your discretion.

What color to choose baseboard for the floor

When choosing skirting boards for the floor, as a rule, they are guided by the type of floor covering. For example, the most suitable baseboard for parquet floors is made of a similar material - wood, MDF. Exactly the same as for ceramic tiles - ceramic baseboard.

When deciding how to paint the floor plinth, what tone to choose, the parameters of the room, its geometry, ceiling height, general interior style and, of course, your preferences are considered.

You can choose the color of the baseboard:

To match the floors

It is considered classic to match the color of the fillet to the tone of the floor covering. The baseboard should be a couple of shades darker than the floor covering or lighter and serve as a kind of floor-wall boundary. When the elements are monotonous, we visually get an increase in the boundaries of the room.

To match the walls

It would be a good idea to “tie” the tone of the floor plinth to the walls. If the walls are plain, then this is easier to do. Then, not only the harmony of design and the calmness of the color scheme are noted, but also a visual increase in the size of the room.

To match the doorways

Often the color of the plinth is oriented towards the tone of the doors, or rather the trim, which is visually perceived as a continuation of one continuous line of color in the interior. They should be the same in thickness.

Color Contrast

Often, contrast in color selection has a very beneficial effect on the overall perception of the room as a whole. It turns out that the baseboard is a kind of accent, which should echo the other details of the room in color. These can be any interior items - upholstered furniture or decorative pillows for it, curtains, wall panels, etc.

We discussed how to paint a floor skirting - in fact, it seems that it is a small element of the interior. However, there are no trifles when decorating a room - sometimes minor changes add very interesting notes to the overall harmony.

All photos from the article

Polyurethane skirting boards are today considered by most experts as one of the most suitable materials for decorating ceilings and walls. A wide range of polymer fillets, their good performance, as well as a number of other advantages explain the demand for such products in this market niche.

In our article we will look at what these advantages are, and then we will describe the installation of polyurethane skirting boards, paying attention to the key features of the technology.

Product overview

Main varieties

Skirting boards made of polyurethane foam are elongated panels that are made from polymer raw materials. As a rule, such parts are installed at the joints of surfaces, therefore their design provides for the presence of two perpendicular planes used for fixation on the base.

The front part of the plinth can be very different.

Depending on its configuration, the following varieties are distinguished:

• smooth - the simplest, used simply to mask the corner. Smooth skirting boards are characterized by a minimal price, but their decorative potential is low;

Note!
On the other hand, the smoother the front part is, the less prone it is to dust accumulation, and the easier it will be to care for the baseboard.

• shaped - have a more complex configuration. It is shaped models that occupy the main market share, since they combine both an attractive appearance and simplicity of form;
• relief - act as an independent decorative element. Most often, the relief imitates gypsum stucco, which is why such a polyurethane foam plinth will not be appropriate in any interior.

Depending on the purpose of the products, an alternative classification can be given: