However, the owners of the corresponding containers are spared from their characteristic disadvantages. These disadvantages include a certain fragility of the material.
Under the influence of a wide variety of external factors, careless impacts, impacts from sharp or heavy objects, and when certain heavy objects fall directly into an open tank, creating a hydrodynamic shock, such tanks can be damaged.
Damage can be very small and pinpoint, such as from a prick with a sharp object, or extensive, which manifests itself in large cracks that can fall apart structures almost in half.
This sight is extremely deplorable and especially unpleasant when it comes to the largest tanks, since their price is not so small. However, it is not at all necessary to throw out the entire structure when such a problem occurs.
There are possibilities for efficient and convenient restoration of tanks with full return to their original functionality.
Features of the material
Many are accustomed to the fact that they consisted of an extremely slippery material that was resistant to any glue. It is called polyethylene; however, during repairs it is necessary to ascertain as accurately as possible the specific material from which the corresponding container is made.
In fact, containers can be made from three types plastics. First of all, of course, we should talk about polyethylene. This material perfectly combines hardness and ductility, which greatly simplifies the processing procedure.
Polyethylene low pressure retains its functions and characteristics well in the range from -50 to plus 80 degrees Celsius.
Tanks with increased hardness, which can be felt even when touched, are most likely made of polypropylene. It is extremely tensile and has high rigidity.
Polyvinyl chloride structures cannot be used at temperatures below zero and above 60 degrees Celsius.
In addition, such blocks tolerate contact well with chemically aggressive environments at fairly high levels of hardness and strength. Typically, information about the material is indicated directly on the tank itself.
Based on knowledge regarding the material, the very principle of restoration of a specific container is actually chosen; there is a number of specialized technologies by which restoration is carried out.
Of course, first of all we will touch on polyethylene containers, which are the most widely used.
Many people are accustomed to the indispensability of plastic adhesives and epoxy compounds. However, in the case of polyethylene they are completely useless.
Small cracks and damage can be repaired thanks to waterproofing bitumen tapes. Another possibility for gluing polyethylene tanks is the use of BF-2 and BF-4 glue.
This substance has the ability to dissolve external structures and ensure its adhesion to materials. Of course, in in this case you will need to clean all relevant areas as thoroughly and efficiently as possible, as well as prepare patches from plastic pieces.
In this case, surface preparation, degreasing and ensuring maximum adhesion are key to efficient work glue.
Plastic tanks made of polypropylene can be restored by taking patches of fiberglass and pouring molten polymer onto them using a suitable glue gun.
In this case, cleaning is also required, and in addition, additional heating of the damaged area using a hair dryer. Always take into account the pressure of the water itself from the inside, calculate the required volume of the patch and the required adhesive material for reliable fastening.
Extremely effective method, which copes excellently with all types of plastics is welding.
Considering that materials are freely capable of transitioning from a solid to a viscous state, it is quite possible to try to melt the plastic to a certain depth, and then simply fill the damaged area with the same heated plastic or specialized strands to a certain depth.
Of course, in this case, extremely thorough cleaning of the surface is also necessary. In addition, all tanks used for production restoration work It is advisable to completely free it from water.
Plastic – unique material. Unlike metal, it is not subject to corrosion processes and rotting, therefore it is especially popular and in demand not only in everyday life, but also in production.
Our company provides services not only for manufacturing, but also for repairs plastic containers for any purpose.
To do this, we use a powerful material and technical base, which allows us to eliminate faults of any level of complexity in the shortest possible time.
Professional repair of plastic containers from any manufacturer
When ordering a plastic product from us, you receive a guarantee. Our specialists travel anywhere in the country to promptly resolve the problem.
However, what if you need repair of plastic containers another manufacturer?
Our workshop employs a staff of experienced specialists with experience professional activity which exceeds more than 5 years.
The craftsmen have all the necessary knowledge and skills, as well as the nuances of repair for any plastic product.
Repair of plastic containers carried out in the shortest possible time. 
To eliminate the malfunction, hot air welding technology is used. As a result, no seams or joints are formed, the treated surface looks completely smooth and without a single flaw.
Such a solution allows not only to produce high-quality repair, but also to return the product to an attractive appearance.
If the plastic has cracked, a hole has formed or the surface has burst, we can quickly fix everything.
It is important to understand that most often plastic refers to a specific technical polymer - polypropylene, which cannot withstand very low temperatures.
The range of values for its normal functioning ranges from -15 to +120 degrees Celsius.
That is why you cannot use cold welding or any other adhesive substances that do not interact well with chemical elements when working with it.
Cooperation with us brings undoubted benefits!
Repair of polypropylene containers produced on specialized equipment. Our workshop has a significant track record of successful activity, during which we have become true professionals.
Our specialists will be happy to advise you online. To get answers to all your questions, contact us at the number indicated on the website.
Repair of a polyethylene container can be carried out in relation to any plastic product, including:
Tank repair– a service that is in demand, because if the tank is damaged, you don’t want to throw it away, so all that remains is to have the damage professionally repaired.
This is especially beneficial in the financial aspect, because repairs require a significantly smaller investment than buying a new product.
Plastic is both a strong and fragile material, and if handled incorrectly, its breakage is inevitable.
With us you get not only professional and efficient repair, but also attractive prices that we make loyal and affordable for you. Call us and get answers to all your questions right now!
Any fall or mechanical impact can lead to cracks. And the container that allows water to pass through becomes useless. But seal a plastic water container It is quite possible that it will serve properly for some time.
It is quite possible to seal a plastic barrel at home. Let's consider two options for how to eliminate gaps in plastic barrels and other containers.
Option 1
For work you will need the following materials and tools:
Operating procedure:
VIDEO INSTRUCTION
Option 2
If you need to repair a container whose water is under pressure, you can resort to another method.
To work you will need:
Operating procedure:
Final sealing and smoothing out irregularities on the repaired plastic tank If the defect in the plastic container is small, you can use epoxy glue. Two-component epoxy adhesive will help effectively solve the problem of leaky plastic tank.
It is characterized by increased resistance to moisture and chemicals, polymerizes in just 1 hour, non-flammable.
Needs to be cut required quantity glue, knead clean hands until a homogeneous mass is obtained, fashion a cone out of it and insert it into the hole in the tank. Fix securely for a few minutes.
Then you need to wait 2 hours, after which the container can be used.
The cost of this composition is from 150 rubles per package of 50 g.
They also have similar properties adhesives "General Purpos Permapoxy PERMATEX"(from 314 rubles for 25 ml) and “Plastic Weld Permapoxy PERMATEX” (from 320 rubles for 25 ml).
You can purchase epoxy adhesives in most construction stores, as well as via the Internet.
A plastic tank is a convenient water reservoir that ensures the preservation of liquid parameters for a long time. It is not destroyed by moisture and is not prone to rust, but can be deformed under the influence of external factors. How to seal a plastic water tank? The choice of method depends on the nature of the damage and the type of polymer.
Before sealing a plastic water tank, you need to know the composition of the material that was used to make it. Depending on the source raw material there are the following types polymers:
To repair plastic tanks, there must be no water in them.
The container is emptied of liquid, and the damaged area is cleaned and degreased. Then perform the following operations:
Any vehicle wears out over time. This applies to all elements of the car, including the car tank. In particular, used cars may experience small crack or even a hole in the tank.
Of course, such a malfunction cannot be ignored under any circumstances, since, firstly, it is very dangerous for the life of the driver and his passengers, and secondly, it is a very costly affair (fuel will constantly leak out through the hole).
In fact, any car owner can repair the tank with his own hands. There are several ways you can use to repair a hole in the tank yourself. To do this, he needs patience and a number of the following things: soap, solvent, cold welding, epoxy glue, fiberglass, soldering iron and solder, as well as welding machine with electrodes.
Instructions for action:
1. If the hole is small, then you can repair the hole in the tank with your own hands using ordinary laundry soap. You just need to rub the entire surface of the tank in the area of the defect with laundry soap.
2. To use the following method, it is first necessary to stop the flow of fuel from the gas tank. Only after this can you try to repair the crack in the tank using cold welding. If it is not possible to remove the gas tank itself from the car, you can again use laundry soap and rub the defect area with it. The fuel flow will be stopped for some time. Next, use acetone to remove most of the soap and degrease the surface. After this, it is necessary to carefully treat the surface of the tank near the crack. sandpaper. This is done to ensure better grip. Now you can take a cold weld and seal the hole, while grabbing the edges a couple of centimeters.
3. Fiberglass is needed to improve the insulation of the gas tank. Before gluing the surface of the tank with this material, it should be moistened in epoxy glue. Apply fiberglass exclusively to dried cold welding. This usually takes about fifteen minutes. To achieve the best effect, experts recommend gluing 3-4 layers of fiberglass.
4. If the hole is large enough, it must be soldered. Before you start soldering, you need to completely stop the flow of gasoline and drain it as much as possible. After this, the surface around the defect is treated with sandpaper and degreased with acetone. Next, you should tin the hole with tin and a suitable tin plate sanded. Now you can solder the hole. The sealed area is additionally tinned with tin.
5. To ensure greater reliability, experts recommend additionally welding a hole in the gas tank, having previously completely expelled the fuel vapors from the unit. To do this, you need to put it on the exhaust pipe and give it a good gas. Now you can weld the hole.
autoremka.ru
Buckets, basins, barrels and other household equipment are made of plastic. This material is practical, easy to use, but short-lived.
Any fall or mechanical impact can lead to cracks. And the container that allows water to pass through becomes useless. But it is quite possible to seal a plastic water container so that it will serve properly for some time.
It is quite possible to seal a plastic barrel at home. Let's consider two options for how to eliminate holes in plastic barrels and other containers.
Option 1
For work you will need the following materials and tools:
Operating procedure:
VIDEO INSTRUCTION Option 2
If you need to repair a container whose water is under pressure, you can resort to another method.
To work you will need:
Operating procedure:
Final sealing and smoothing of irregularities on the repaired plastic tank 
Seal up the cracks in the tank VIDEO ON THE TOPIC The first method has proven to be the most effective in practice. The second one is more suitable as a temporary measure.
If the defect in the plastic container is small, you can use epoxy glue. Two-component epoxy adhesive will help effectively solve the problem of a leaky plastic tank.
It is characterized by increased resistance to moisture and chemicals, polymerizes in just 1 hour, and is non-flammable.
It is necessary to cut off the required amount of glue, knead it with clean hands until a homogeneous mass is obtained, fashion a cone out of it and insert it into the hole in the tank. Fix securely for a few minutes.
Then you need to wait 2 hours, after which the container can be used.
The cost of this composition is from 150 rubles per package of 50 g.
The adhesives “General Purpos Permapoxy PERMATEX” (from 314 rubles per 25 ml) and “Plastic Weld Permapoxy PERMATEX” (from 320 rubles per 25 ml) also have similar properties.
You can purchase epoxy adhesives at most hardware stores, as well as online.
kakkley.ru
A common problem with used cars is a crack or hole in the gas tank. Ignoring this defect is not easy and expensive, since gasoline will leak, but it is dangerous. There are several ways to repair a hole in a tank. 
