Knowing how to properly clean the tank and toilet from lime deposits and urinary stone, you will remove even the most difficult deposits, leaving your plumbing fixtures snow-white and clean. Use soda, vinegar, Coca-Cola, oxalic acid, citric acid or bleach. In particular difficult cases use automotive electrolyte or hydrochloric acid, provided that the sewer system is made of metal. Remove the water from the toilet bowl, treat the surface and leave for 20 minutes (or more, depending on the chosen cleaning method). Then scrub thoroughly with a brush and rinse, draining the water from the tank.
The bathroom is a favorable place for the development of microorganisms. In addition, urinary stone and limescale deposits inside the toilet, spoiling the appearance of the plumbing. Knowing how to clean a toilet will improve your sanitary conditions and restore plumbing, but the main thing is to approach the procedure competently, since improper exposure will irreversibly damage the enamel.
If dirt and deposits appear in the toilet, take immediate action to avoid unpleasant odors and sediment buildup.
The following types of pollution are formed inside the toilet:
Enameled plumbing is less prone to the formation of plaque that cannot be removed, but on rough surfaces it appears more often and more intensely.
If going to the toilet becomes unpleasant because conspicuous stains and bad smell, try cleaning the toilet with a brush. If you are not pleased with the result, move on to more serious cleaning methods. Folk remedies are well suited for cleaning minor and old deposits in private houses and apartments that have a plastic pipeline or a local sewer/cesspool system.
With prolonged exposure, vinegar can dissolve hard urinary stones and limescale without damaging the surface of the toilet.
To clean the toilet:
To enhance the effect, you can use heated vinegar essence or vinegar-soda solution (1 tbsp soda for 1 tbsp acid). The processing mechanism is the same as when washing with pure vinegar.
Scoop the water out of the toilet, pour in the product and flush by pressing the button on the tank.
Folk remedies are no less effective: pour ½ pack of soda with 1 tbsp. water (scoop out the water from the toilet first). After 15–20 minutes, pour a kettle of boiling water into it so that the dissolved blockages go into the sewer or street cesspool.
If you have a problem with how to clean a dirty toilet, use special or folk remedies. To aggressive ones, like of hydrochloric acid and auto electrolytes, resort in extreme cases, because they are dangerous for the drain system.
Larisa, July 6, 2018.The toilet is an important plumbing equipment. At frequent use urinary stone and plaque form in the toilet, which spoils the appearance of the plumbing. But this is not the only reason why constant and careful care is needed. In this environment, bacteria and dangerous microbes thrive, which can lead to serious illnesses.
Sediment and limestone accumulate gradually. At first it is a light sediment, which grows and hardens each time. And after some time it will not be easy to cope with the cleaning.
Causes of deposits:
Contaminants can be removed traditional methods or chemicals.
Every housewife has proven methods in her arsenal that effectively cope with cleaning. Home remedies are preferred. In every home there are inexpensive, chemical-free preparations. The fight against limescale in the toilet begins with them.
This food supplement copes well with a slightly hardened lime layer.
Cleaning procedure:
It is unlikely that it will be possible to clean ceramics in one go. The procedure is repeated many times.
To clean plumbing fixtures, use vinegar paired with baking soda. You can remove rust and return to its former whiteness in this way:
The following algorithm will help you remove urinary stones:
If necessary, the process is repeated. Instead of soda, an iodine solution is suitable. To get the result, 5 drops per 200 ml of vinegar are enough. The composition will not only clean the plumbing, but will also remove small sewer blockages at the same time.
An inexpensive product that will get rid of limescale, rust, and old dirt. During testing, no unpleasant odor is released. The only trouble is that this product is becoming less and less common on the shelves. retail outlets. What is the cleaning method:
When working, do not forget to wear gloves.
Clean the toilet yellow plaque Baking soda will help. If the pollution is not too advanced, then it is easy to deal with it using the following algorithm:
Soda can be used to clear clogged drains, but you can’t do this without adding essence.
You should act with caution so that the mixture does not corrode the corrugation, which contains polymers.
The popularity of the method is growing every day, as it actually works.
Pepsi or Cola is poured into the water tank and directly into the drain hole. And in the morning the crust is removed. Soda eats away lime, urea and other contaminants.
Acid battery solution is an effective but dangerous product that can cause serious injury and damage. And not all plumbing fixtures can withstand such exposure. And those who decide to use electrolyte need to take precautions: rubber gloves, safety glasses, an apron and even a respirator.
Electrolyte is used only in extreme cases. People turn to it when they want to clean out heavy deposits and old dirt, but other methods do not help.
It is not always possible to remove limescale and urinary stones on the toilet using home methods. Industrial products designed specifically for this work come to the rescue. Thanks to convenient packaging, hard-to-reach places are treated. Where are the rags, brushes and human hands difficult to get through.
To clean the plumbing chemicals and avoid physical damage, wear full set protective equipment:
Pour 150 ml of the main product into the bowl and water tank and leave for a quarter of an hour. The remains are washed off. And the surface is scrubbed with a brush. Wash off again.
The chemical removes any slag, but does not damage enamel, rubber, or plastic. When working, it is enough to wear rubber gloves.
Prepare an aqueous solution in a one to one ratio. Pour it into the plumbing bowl and leave for 10 minutes. Wash it off. Avoid contact of the solution with rubber and plastic to avoid damage to the product.
Alkaline formulations are produced in convenient packages. The following brands stand out among them:
Algorithm for cleaning with alkaline preparations:
The effectiveness of alkaline mixtures is very low. To obtain good result, the procedure is repeated several times.
You can clean urinary stones in the toilet using commercially available powders with abrasive particles. Their work can be appreciated, but there is a small unpleasant nuance. Small granules scratch structures made of individual materials. This means that sediment will appear again in the near future.
How to remove dirt if there is currently no alternative to abrasive powder:
The tablets will not only remove stains, but also get rid of stones. They have a pleasant smell, disinfectant and disinfectant properties. The tablets are easy to use and have a reasonable price.
To make the tablet perform its function, it is simply placed in the tank. The water is colored a certain color. When flushed, the colored liquid affects the contaminated areas. The original color is gradually restored. This is a signal that the tablet's effect has ended. She is being changed.
There are some differences in the processing of each of these plumbing elements that you need to be aware of and, if necessary, remember them. How to remove dirt from the toilet seat, tank, lid:
In the absence of these drugs, they do it differently:
How to clean the toilet from limescale and urinary stone, and which method to choose for this, each housewife decides individually. But it is still better to prevent a disease than to treat it. It is imperative to perform certain actions that will keep the item safe and sound.
Protect plumbing fixtures from stains and limescale. Provide timely care. And then the product will serve for a long time and productively.
To clean the toilet from urinary stone deposits, you can use not only purchased products, but also folk recipes. For example, housewives often use for this soda ash, citric acid, "White", vinegar and even some of the carbonated drinks. If the plumbing has not been cleaned for a long time, then more powerful reagents are used - chemical acids and even electrolyte for batteries. This article will provide specific instructions and recommendations on how to use these and other products to clear urinary stones from your toilet.
Urine stone is what we used to call the plaque that appears over time on the inner walls of the toilet. Plumbing fixtures that have not been changed for a long time are especially prone to its accumulation, in a very rough surface that holds a large amount of lime. It’s even worse if the toilet tank is made of metal, and the pipes have been preserved from Soviet times - all this forms a lot of rust, which also contributes to the formation of urinary stones. If you can’t replace this rarity with modern plumbing equipment, you will have to clean it at least once a week.
What does the ill-fated urinary stone consist of? Most of it is ordinary lime deposits, and their specific smell and hue is given by microparticles of human waste and rust, held by the pores of the lime. This whole mixture is an excellent environment for the life and rapid reproduction of billions of microorganisms, making the smell even stronger and more unpleasant.
To clean the walls of the toilet from the deposits that have formed, you will have to use strong and rather caustic liquids, so before work, be sure to purchase thick rubber gloves to protect the skin of your hands. The effect directly depends on the time of exposure of the cleaning agent used to the surface of the plumbing fixtures, so it is advisable to carry out the treatment late in the evening, and the cleaning itself in the morning.
First turn off the water supply, then remove the liquid from cistern and the toilet itself. To scoop it out, you can use a syringe or a small jar.
Of course, many would like to quickly get rid of urinary stones in the toilet using available means. And there are such means. Housewives mainly use various acids and liquids containing them for this purpose, as well as alkaline compounds, which include caustic soda or chlorine.
This can be soda (both baking soda and soda ash) or common commercial products such as "Whiteness" and "Domestos". It is advisable to avoid using dry powders to clean the toilet, as their particles strongly scratch its walls, which further contributes to the formation of urinary stones. Below are ways to use these products.
It is usually used to remove scale from teapots, but it also works well with urinary stone deposits. Prepare about 150 grams citric acid and a sponge slightly moistened with water. Use this sponge to apply the powder to the inner walls of the toilet, especially thickly to the area under the rim. No need to rub, the product will corrode everything.
Now leave everything for at least 5 hours, or better yet overnight, then clean the toilet with the hard side of the sponge or a regular brush. If the plaque is not completely wiped off, which happens when the toilet has not been cleaned for a very long time, you can repeat the procedure several times until a 100% effect is achieved.
To prevent breakdown of the drain system due to its contamination, you can treat the inside of the drain tank with citric acid. To do this, fill it with water and pour in a solution of citric acid (100 g of powder per 200 ml of water). Leave it overnight and simply drain the water in the morning.
Citric acid perfectly breaks down lime deposits, which very often cause failure of the moving parts of the drain system.
It is usually used to treat surfaces before applying enamel to them. Externally, oxalic acid is a substance consisting of small translucent granules. To rid plumbing fixtures of urinary stone, it must be used in the same way as citric acid (in its usual form or after diluting it to a liquid paste with plain water or alcohol). Do not forget about hand protection, as the product may damage your skin.
An ordinary dining room table is perfect for processing. First, the entire inside of the toilet must be thoroughly dried. Prepare some vinegar and a few scraps of scrap fabric. Dip cloth rags into vinegar and place them on the surface covered with urinary stones. After treating it completely, close the toilet lid and wait at least 5 hours.
After this, remove the flaps and use an unnecessary knife to separate the urinary stone from the walls. Soaked in vinegar, it should practically fall off on its own, revealing shiny white enamel. If its lower part still fits quite tightly to the surface, repeat the procedure.
To enhance the effect of vinegar, you can heat it, mix it with soda (1 tbsp per glass) or iodine (1: 1).
There are two ways to eliminate urinary stones using soda. It’s worth mentioning right away that the second method is unsafe, so it can be used only in case of urgent need (if it is impossible to cope with the problem by other methods), as well as if there is ventilation in the toilet hood and a tight lid on the toilet. In both cases, we will use soda ash and baking soda mixed in equal parts.
In the first (completely safe) you will need a soda mixture and a spray bottle with 9% vinegar. Soda should be combined with a small amount of water and the resulting paste should be applied to the walls affected by the stone and rubbed a little. After half an hour, spray vinegar on top and wait until the reaction between them passes. After this, clean the toilet.
The second method, in addition to the previously listed ingredients, also involves the use of chlorine-containing liquid bleach, which also needs to be poured into a spray bottle. First, use a damp cloth to clean the toilet with baking soda. After 30 minutes, spray vinegar over the baking soda. After all the carbon dioxide(characteristic foaming of the mixture), apply a layer of bleach from a spray bottle.
During the last stage of treatment, it is advisable not to breathe; you can tie your mouth and nose with a scarf.
The fact is that the reaction of acetic acid and chlorine-containing liquid at the outlet releases a lot of chloride gas, which, when inhaled, causes bronchospasm, intoxication and burns of mucous membranes, so the fan in the hood should already be running. After completing the procedure, close the toilet lid as soon as possible and leave the room immediately. After 30 minutes, drain the water and wash the surface with running water.
This is a fairly expensive option for cleaning the toilet, but there are people who prefer it. In fact, the effect of softening urinary stones with the help of soda is due to the presence in the drink of a large amount of citric acid, which is easy to buy on its own for an incomparably lower price.
But you need to tinker with the powder, and here you just need to pour about 4 liters of soda into the toilet in the evening and put rags soaked in it on the walls. In the morning, the entire urinary stone can be easily scraped off with a sharp object or wiped off with a stiff brush.
Today, there is no shortage of products in stores for emergency and regular toilet cleaning. Most often they are applied under the rim, from where they flow down the walls. For complete cleansing, it is enough to wait no more than an hour, then walk over the treated surface with a brush and rinse everything off with water. In particularly advanced cases, such a procedure alone may not be enough.
Since the choice is really very large, try to purchase the product in the form of a paste, gel or cream. It is worth saying that almost all of them contain hydrochloric acid, which explains their high efficiency. If you hate spending money on expensive commercial products, you can simply buy pure hydrochloric acid and clean the toilet with it (instructions below).
Powerful chemicals It is advisable to use only if all the others have not helped, because they involve manipulating strong and rather dangerous acids. Be sure to wear rubber gloves before working.
Active substance here is sulfuric acid. Pour 200 ml of liquid into the toilet bowl and use a brush to spread it along the walls, apply under the rim. Don't forget to put the lid down. After 15 minutes, drain the water from the tank and scrub the walls with a brush. Rinse everything with water again.
Its concentration should be 33%. When using hydrochloric acid to cleanse urinary stones, it produces caustic fumes that should never be inhaled. If possible, provide good ventilation in room. The product should be used in the same way as battery electrolyte.
Pour 100 ml of acid into the tank and the toilet itself, and use it to treat the walls with a brush. Wait a quarter of an hour and drain the water, scrub the surface with a brush to separate the urinary stone from it. Drain the contents of the tank again. During this procedure, the internal walls of not only the toilet itself, but also the flush cistern are cleaned, which is especially useful if they have already begun to rust. Besides, orthophosphoric acid does not corrode rubber and plastic, therefore it can be used in houses with metal-plastic pipes.
If the toilet is cleaned in a timely manner, the condition of this plumbing fixture will always be good.
You should not only follow the operating rules, but also use special means to remove stubborn dirt such as urinary stones.
Contents of the article:
The main factors for the appearance of urinary stones:
To clean any surface household appliances from plaque, it is necessary at the first stage to remove the liquid from the internal structure. To do this you need to use a plunger. If you do not have this element, you will have to use a glass with a handle.
Only after the water has been bailed out or the system has been punctured should it be used. detergents. A special liquid is evenly applied to the surface and then left for about 60 minutes.
If during this time the plaque has not succumbed to the splitting processes, it is necessary to reapply the product, and then use a brush or similar object to remove the plaque. The older and thicker the deposits, the stronger the means required.
All methods of cleaning a toilet from urinary stones come down to using one of the following types of products:
Abrasive powders. The most famous of this group of products is Pemolux. Using these elements is quite simple. You should do the following:
It's quite hard work. The presented method is not recommended for use on earthenware coverings, as they may lose their smoothness and develop small cracks.
The same negative effect is possible for other types of surfaces, so you should clean the toilet carefully. If microscopic cracks are allowed to appear, dirt will accumulate in them.
Alkaline products. They are most often used in this group by “Belizna” and “Domestos”. The composition of these products is distinguished by the presence of caustic soda. It acts directly on the urinary stone, completely dissolving it. Leftovers harmful substances After application, the product can be removed with a brush, after which you should generously water the cleaned areas with water.
To use this tool correctly, you must perform the following steps:
Alkali can achieve complete dissolution of urinary stones. These products must be used carefully. The condition of the tank should be checked. If it leaks even a little, you need to turn off the water for a while.
Products containing acid. This group includes “Silit”, “Duckling” and “Comet”. These products should be used according to the principle that is relevant for alkaline solutions. Substances with an antibacterial effect are often produced based on acid. Their use allows you to get rid of not only urinary stones, but also from infection.
To ensure your toilet is in perfect condition, you can use traditional methods.
The toilet bowl is bleached, disinfected and cleaned not only using purchased products, but also using substances that almost every housewife has.
Alkali
IN Lately The use of caustic soda is common. With its help, any pipes can be cleaned, even from severe blockages. Together with the urinary stone, the toilet bowl is cleaned of fat, since this chemical is capable of dissolving organic substances.
To clean the toilet, you need to put on high-quality rubber gloves in advance, and then do the work, carefully distributing the product over the surface. Housewives often opt for store-bought gels that contain alkali.
If the surface is excessively dirty, you must use the following procedure to clean it:
The yellow-brown crust is a urinary stone. This plaque can best be removed with alkali. Other remedies work worse. Together with this crust, you can simultaneously get rid of rust and other contaminants.
Acid
This product is also excellent at removing dirt. The toilet bowl is cleaned of the most corrosive substances, so the complete elimination of urinary stones with correct use funds guaranteed. If you leave it for a long time, it may partially disappear upper layer coverings.
It is advisable to constantly check the degree of cleanliness of the toilet, trying to remove dirt with a brush in order to remove the product after it has been completely eliminated. It is necessary to add water to the mixture every 5-10 minutes or rinse and reapply.
Typically, home owners use vinegar essence for various purposes, so almost everyone has it. Sulfuric acid can be obtained from the battery, since it is necessarily contained there to maintain the function of the electrolyte.
Bleaching
To remove dirt and bacteria from the toilet along with urinary stones, you can use a solution of regular bleach. This substance has excellent whitening properties, but to achieve maximum results you will have to work the surface with a brush.
To remove traces of urinary stones, you can use a pumice stone. Cleaning a toilet with a regular pumice stone is not very convenient, so it is advisable to purchase a special device on a stick. You may wear gloves when performing work.
When bleach is mixed with abrasive, the best remedy to remove dirt is very difficult to find. In rare cases, the plaque remains. In this case, you will have to additionally clean the surface with acid.
The greatest difficulties arise when cleaning an old toilet. Its surface is rough, as there are scratches, roughness, and sometimes chips. Even with regular and sufficiently high-quality cleaning, constant contamination leads to the formation of indelible urinary stones. Usually, only replacing the old plumbing fixture with a new one helps.
You can use Coca-Cola to whiten the inside of the toilet.. You should pour the drink into the container and wait a few hours. When using this or a similar strong product, the following instructions must be observed:
To prevent the appearance of persistent urinary stone deposits and other contaminants, it is not necessary to constantly use strong products. You need to follow some instructions:
It should be remembered that expensive toilets should be cleaned regularly, since when getting rid of heavy pollution the top coating may be damaged, which will negatively affect appearance subject.
More modest furniture also needs to be washed on time so that you do not have to spend a lot of time on cleaning.
There is an opinion that a clean sink and a clean toilet are the face of the housewife, but in fact, not only the reputation of the woman caring for it, but also the health of the household depends on cleanliness. The toilet is a place where pathogenic bacteria constantly accumulate, and the presence of limescale and urinary stone in the drain pipes contributes to this.
There is an opinion that a clean sink and a clean toilet are the face of the housewife, but in fact, not only the reputation of the woman caring for it, but also the health of the household depends on cleanliness. The toilet is a place where pathogenic bacteria constantly accumulate, and the presence of limescale and urinary stone in the drain pipes contributes to this.
The appearance of urinary stones depends on many factors. The reason may be poor quality water in the tank, infrequent flushing while using the toilet, broken tank, old plumbing and bad enamel coating plum, or all these reasons together.
Urine stone is a plaque consisting of calcareous and mineral deposits. To a greater extent, the amount of these deposits will depend on the regularity of cleaning the plumbing and on the condition of the pipes; the more rough places there are in the drain pipe, the easier it will be for mineral deposits to settle there, and the thicker the layer of stone will be.
To remove limescale from a drain pipe you will need:
To clean the toilet from corrosive plaque, you first need to remove all existing water from the drain pipe, to do this you need to shut off the access to water and remove the existing water, this can be done using an old ladle, or a jar, a large syringe, a plunger or any other container that can be used you can remove excess liquid from the drain hole.
The presence of water will reduce the effectiveness of stone removal products, so for maximum effect, it is worth fiddling around a little to get the desired result.
Then, carefully protecting your hands from aggressive means, you need to apply them to the urinary stone, leaving it for a long time, ideally overnight. After some time, the stone is removed with a hard sponge, brush, brush, spatula, possibly a plastic knife or knife, or other thing with a fairly hard surface. However, it is worth considering that by injuring the surface of the drain, the problem with urinary stones will begin to form more often.
The choice of means to combat stone plaque is quite large; you can use a special solution or gel purchased in the store, or you can choose a remedy from the substances available at home.
What can I use to clear stone from a pipe drain?
Vinegar is found in almost every home; its use is not limited to culinary needs. The scope of its application is quite wide and one of such applications is cleaning the toilet.
In order to clean drain pipe To remove plaque from the toilet, you will need vinegar, about a glass and old rags. It is advisable to heat the vinegar, although you can use a solution room temperature. Then, after putting on gloves, we generously soak old rags with heated vinegar and place them on the affected areas of the drain. The toilet is closed with a lid and left for a while. The plaque softens under the influence of vinegar and is easily separated from the surface with a spatula or knife.
Citric acid should be applied with a damp sponge or cloth in a thick layer to the affected areas, left for several hours, and then stung with a hard sponge or brush. Sometimes the procedure should be repeated until the plaque is completely eliminated.
The principle of working with oxalic acid is the same as when working with citric acid. Oxalic acid crystals are applied to a damp surface in a thick layer and left for some time, then the surface is cleaned with a hard sponge.
You should take into account the fact that oxalic acid is very caustic and you must use gloves when working with it!
Soda, both baking soda and soda ash, for cleaning the drain pipe, can be used both in pure form, and in company with acetic acid, and some housewives also use chlorine bleach.
If you choose chlorine for cleaning the toilet, you should take care to protect your lungs from the release of caustic gas; for these purposes, you should take care of good ventilation of the toilet room and the ability to close the toilet tightly.
Baking soda, in relation to soda ash, is converted with water into a thick paste, which is applied to damaged surfaces. If desired, after some time the soda slurry is sprayed on top with vinegar and/or chlorine bleach. Then, using a stiff brush, the mixture is removed along with the plaque. If necessary, the procedure should be repeated.
Due to the fact that imported soda contains a large amount of citric acid, it is often used to eliminate various raids and scale. Coca-Cola has also proven itself in cleaning toilets.
This tasty and not the cheapest method is quite effective; if necessary, the soda can even be heated. The effect occurs in approximately 3-4 hours.
Whiteness contains in its composition a caustic ingredient that effectively removes lime deposits, while it dissolves it entirely. The effect of whiteness can be compared with the effect known to many housewives, Domestos.
One of the healthiest ways to remove stone deposits is to use chlorine. Working with this product requires special care, since if handled improperly, you can get a burn to the respiratory tract. Due to its properties, which allow not only to remove plaque, but also to kill all possible microbes, bleach still remains one of the most common means used for cleaning toilets.
Modern household chemicals allow you to quickly and effectively eliminate any problem, including eliminating limescale that has formed in the toilet.
This tool has already been mentioned above. Domestos dissolves limescale in the drain pipe, softens it and makes it easy to eliminate the problem. The product usually has a gel structure and does not flow off the surface immediately, which makes it possible to exclude additional elements, for example old rags. Contains chlorine!
Another remedy for fighting plaque and bacteria is toilet duck. Its main component is hydrochloric acid. The method of application is the same. You need to apply a thin layer of the product to the damaged areas and leave for a while, repeat if necessary. Then clean the drain with a stiff brush or sponge and rinse with plenty of water.
The composition of this product also contains hydrochloric acid. According to users, it has proven itself to be excellent in cleaning toilet bowls from limescale build-up.
Another modern remedy in the fight against bacteria and limescale deposits under the toilet rim and in the drain holes. The product has proven itself in the fight against limescale and rust. Directions for use: Apply the product to damaged areas, leave for 15-20 minutes and then remove with a brush or hard sponge.
Cleaning product produced by Aist. Is different affordable price and fast cleaning effect.
To remove limescale deposits in the toilet bowl, you should choose Mister Muscle in granules. The crystals are applied to the damp damaged surface, which is subsequently cleaned with a brush and washed with water.
A specially developed product for removing limescale from plumbing fixtures. Use according to instructions.
If the dirt is very old and the layer of limescale is very thick, then strong substances come into play.
Please note that their frequent use is contraindicated!
The use of hydrochloric acid requires compliance with safety rules. It is not recommended to inhale acid vapors! Do not use acid if there is plastic pipes. The use of protective gloves is mandatory!
Acid is applied to inner surface toilet bowl and under the rim, leave for 15 minutes and wash off with a brush and a large stream of water.
The main component of battery electrolyte, which is the main active element in a car battery, is sulfuric acid. Co school curriculum It is known that this substance is extremely dangerous and must be used with extreme caution and only in the most extreme cases.
This substance will allow you to get rid of urinary stones in just 10-15 minutes. It can be used even if there is plastic elements and pipes. Be sure to use rubber gloves!
The principle of cleaning a toilet from plaque under the rim is no different from cleaning a drain pipe, only in this case the cleaning agent is applied directly under the toilet rim. It is better to choose liquid products that can be easily applied under the rim. For example, use household chemicals in convenient plastic containers with a curved nose. You should then use a toilet brush to remove dirt. For rinsing, you can use a powerful syringe.
It happens that urinary stones form on the walls of the drain pipe, in places inaccessible to the human eye. In these cases, residents often encounter periodic blockages.
To eliminate this problem, you can use special tools to remove blockages, which help to corrode not only the blockages themselves, but also the stone that caused them. If clogs occur frequently, it may be worth calling a professional to fix the problem.
When cleaning your toilet, you should consider the materials it is made from. Nowadays, toilets themselves are most often made of ceramics or earthenware, but pipes can be made of different materials, made of plastic, metal, both metal and plastic. Pipe connections can be made of plastic or rubber. These nuances should be taken into account when choosing products to remove contaminants.
If the toilet is made of porcelain. When cleaning porcelain toilets, it is important not to damage the enamel with which it is covered; excess scratches on the surface lead to the destruction of the toilet and contribute to the rapid clogging of damaged areas with limescale, and urinary stones form even faster. Here you should avoid cleaning with abrasives and powders. To clean a porcelain toilet, it is best to choose acidic and alkaline cleaners.
Ceramics and faience. When cleaning ceramic and earthenware toilets, a hydrochloric acid solution is ideal. Metal brushes and spatulas should be excluded, as they cause scratches. When treating a toilet bowl, it is not recommended to use boiling water unless you want to replace a burst toilet bowl.
Polymer concrete. For toilets made from polymer concrete, gel cleaning agents and liquid products.
Stainless steel. The most easy-to-maintain toilets are made from this material, but they are quite rare. When cleaning stainless steel toilets, any cleaning and aids. A spatula, iron brushes, all this will not cause any harm to the toilet. You can also use boiling water for processing.
It is easier to prevent any problem than to fix it. To make urinary stones less likely to be deposited, you should follow some rules.
Simple ways to keep your toilet clean:
