Mora Top is a Czech company that has been known on the market for quite a long time thanks to its developments. Engaged in the development of impeccable products that satisfy all customer needs. The company also tries to fulfill the requirements of technical progress. It is worth studying the features in advance and technical specifications, which the Mohr gas column has.
We managed to win the sympathy of buyers thanks to a number of unique characteristics inherent in modern models:
Note! Market price Most models do not exceed 16 thousand rubles.* The consumer properties of the Mora dispenser are higher compared to existing analogues.
Heating a home and hot water supply are two main issues that can be resolved by any buyer who decides to purchase gas water heaters. Cost-effectiveness and compact dimensions are among the main positive aspects devices.
There are other characteristics that can attract buyers:
Interesting! The disadvantage is that it is difficult to find parts for some models. Especially if they were released quite a long time ago. Mora gas water heaters are cheaper than existing analogues, but some buyers consider existing prices too high.
Mora geysers are instantaneous water heaters. There are not many main elements in the design:
Together with safety and operational adjustment equipment, the above components are placed in one housing.
Important! A gas burner makes the gas combustion process as safe as possible. In this case, the water in the heat exchanger warms up to desired temperature. The gas supply stops after the water supply is turned off. In this case, the gas also goes out.
Ignition in a gas water heater is supported in two types: piezoelectric or conventional electric. Electric batteries serve as a heat source in the first case. The piezoelectric method assumes that the igniter is first lit, and then the burner is ignited.
Ignition occurs with the opening of the water tap and changes in pressure in heating system. This rule also applies to the Vega series.
Most buyers do not think about the quality of geysers from this manufacturer. This parameter is rarely in doubt, confirming its reliability in practice.
The main series are represented by several modifications:
If you purchase a version with electric ignition, over time you will need to install several new batteries, you also need to remember this. All of these models are wall-mounted.
Note! When turning on 2-3 mixers, one wall-mounted unit is quite enough for efficient work. The cases of all versions remain small.
The room and installation location are the most important parameters, which should be decided upon before installing the unit. The main thing is that there is ventilation inside the room. And the walls must be made of material that does not support combustion. Usually the setting remains simple process, which consists of just a few steps:
As for operation, you only need to turn on the unit and set the appropriate temperature. There are two special handles on the front panel of the device. The main control handle has only four positions:
Note! High reliability and service life of at least 12 years are characteristic of any burners included in the lineup. Customer reviews will confirm that failure occurs extremely rarely. And finding spare parts is not difficult.
It is better to immediately contact the service center if the warranty period has not yet expired. In almost all major cities representatives of the company from the Czech Republic are working. Here are a few problems that users encounter most often:
A common cause is insufficient traction. The condition of the chimney ducts is checked first. The water heater is accurately installed with irregularities, if the pipe is clean, but the draft sensor still works. This means that there is not enough oxygen in the boiler room for normal operation. The problem can be solved by installing a supply and exhaust valve. The main thing is not to choose bad cheap analogues.
Most likely, the rubber membrane at the water reducer has broken. Corrosion eats away at the heat exchanger. It is recommended to install copper coils in areas of leaks.
This usually happens when the batteries run out. Or due to poor water pressure, lack of oxygen indoors in sufficient volumes.
Note! Failure of the water unit gearbox is also a common failure. Inside the block there are rubber gaskets that quickly break due to water pressure. On average, the membrane needs to be changed every 5-8 years.
Service centers, official stores - optimal places to purchase spare parts for geysers. Then as Supplies there is no doubt.
The Czech company Mora Top has been present on the geyser market for many decades. All this time, she tries to produce impeccable products that satisfy all consumer needs. At the same time, the company does not lag behind the requirements of technological progress. Let's look at the most popular models of geysers of this trademark, their features, and also give valuable advice manual.
This modification is designed to replace models 5502, 5505, 370, 371. All four versions were discontinued several years ago, but as previously installed equipment wears out, you can replace them with new column, without changing connecting dimensions. Thanks to this, updating water heaters will be easy and simple. Geyser mounted on the wall, capable of developing thermal power 17.3 kW, providing up to 10 liters of heated water in 60 seconds. The design of this model uses:
The system automatically maintains the set liquid temperature. There are two options - with piezoelectric ignition and battery-powered. The entire necessary range of safety devices has been installed.
It is impossible to switch the gas valve to open position when the water supply is turned off. Gaseous products will definitely not get out.
This is another promising model from the Czech company. Its characteristic advantages are, in addition to its brilliant design, compact dimensions and technological excellence. The thermal generation rating is 17.3 kW, and the spread in the amount of water received (when heated to 25 degrees) is from 5 to 10 liters. The device is able to operate in an automated mode and consume 10% less gas than other products of comparable power. Positive reviews Buyers are also attracted by efficiency up to 92%, as well as smooth power control.
Combined fittings from Germany are capable of turning on the column even at a pressure of 2.5 liters in 1 minute. Other designs of the same kind do not provide this opportunity. What is important is that the German developers also made sure that a strictly specified temperature was maintained. This allows you to extinguish the negative effect associated with pressure surges. Refusal to operate moving parts in water prevents the disadvantage of most columns - a high risk of leakage at the intersection of water and gas fittings.
This model is equipped with an ignition powered by 1.5 V batteries. For normal operation, 2 batteries must be used. Like other versions in the Vega line, the design attracts attention with its external design and at the same time technical leadership. A protective thermostat is provided to prevent overheating of the liquid inside the heat exchanger. The automation will block the operation of the main burner if there is no water; a high-quality ionization electrode is installed.
This geyser is far superior to all the versions listed above. It develops thermal power up to 26.4 kW, while the minute flow rate warm water ranges from 8 to 15.2 liters. Operation of the device involves consumption natural gas. The special design of the fittings ensures that the column starts already when 4 liters of water enters per minute. The heating rate due to the improved heat exchanger is increased by 15% compared to similar designs.
Additional turbulators slow down the deposition of scale particles many times over and speed up the heating of the liquid. The carefully selected diameter of the heat exchanger tubes allows for a balance between slow accumulation of salts and effective cooling of the walls. This cooling occurs without simultaneous overheating of the housing and casing. The design includes protection against leakage into the room flue gases. There is also a fire safety device that stabilizes the action of the main burner and igniter.
No matter how well Czech and German developers treat their responsibilities, geysers can still cause various failures. Problems with water and gas blocks may be associated with mechanical defects in the water heaters themselves or with deformation of the supply cables. Also, as with other columns, problems are often created by:
At the input to the column there is a filter in the form of a grid. It is designed to trap small debris moving with the flow of water. But since the mesh itself inevitably becomes clogged with this dirt, it needs to be cleaned periodically. When the column does not light up or goes out too quickly after starting operation, the reason for this development is almost certainly due to wear of the membrane. An element that continuously stretches under pressure fails over time, becomes overstretched, or breaks completely.
If you hear a pop when igniting and the wick immediately goes out, the fuse is dirty. Clean it by removing the casing and unscrewing the tubes of the draft indicator and the gas supply channel. In addition to the fuse itself, it is better to immediately free the wick and nozzles from dirt. In a situation where these measures do not produce results, you will have to change solenoid valve. If there is a spark that does not ignite the burner, it is necessary to inspect and tighten the wiring of the ionization controller and clean its contacts.
You can often hear that a gas water heater does not heat water well. The main reason is a malfunction of the heat exchanger, clogged with soot and soot. An accurate diagnosis can be made by the color of the fire - in the case of a real blockage, it turns yellow and may even deviate to the side. This condition threatens serious overheating of the casing and requires immediate cleaning.
To reduce the risk of scale, you need to avoid heating the water unnecessarily to 55 degrees and install protective filters. If a blockage does occur, it is necessary to close the gas pipeline and water supply circuit. After draining the remaining liquid in the radiator, remove the casing and open the way to the main plates. If necessary, they are not only cleaned with a brush, but also the problematic parts are removed and washed.
Water leakage does not appear suddenly, because the corrosion process develops gradually. Small holes can be seen by spots on the surface of the heat exchanger. It is best to inspect the structure after closing the tap, then the pressure will be higher and the problem will become clearer. Instead of soldering the radiator, you can use a rubber pad or cold welding.
In the latter case, you will also have to select a material whose melting point is higher than the expected heating during operation.
You can connect a system that has been in cold conditions for a long time after at least 2 hours in a warm room. You cannot use a geyser located closer than 0.1 m from walls or any other objects. There should be at least 0.4 m above it. If a thermostat is installed, it must be selected with an outlet without electric potential, since any discharge threatens to explode.
An autonomous hot water supply system today is relevant not only for a summer residence or country house, but also for a city apartment.
Interruptions in hot water and its summer shutdowns, accidents and major repairs networks are deprived of the already familiar comfort.
An instantaneous water heater allows you to provide your home with uninterrupted and high-quality hot water supply throughout the year.
Rising electricity tariffs tip the scales in favor heating devices, operating on gas, as more economical.
The geyser is instantaneous water heater, consisting of an ignition device, gas burner, heat exchanger, water-gas fittings.
All components of the device, together with control and safety equipment, are housed in a compact and aesthetic housing. The ignition device ignites the main burner when the water tap is opened and the pressure in the system changes .
The gas burner ensures safe combustion of gas by heating water in the heat exchanger. When you close the water tap, the gas supply stops and the main burner automatically goes out.
The ignition device can be piezoelectric or electric. At the press of a button, the piezoelectric element ignites the igniter, which subsequently ignites the main burner. In devices with electric start The source of the spark is energy from electric batteries.
Mora Top geysers are assembled in our own production facility in the Czech Republic. These are reliable and high-tech units for installing a hot water supply system for an apartment or cottage.
Water heaters are characterized high efficiency, The efficiency is 92%. Their operation is almost silent, which allows them to be installed anywhere. The fuel for them can be either natural or liquefied gas.
The Mora line of speakers consists of the following models:
It is important to know: Speakers with electric ignition require periodic replacement of batteries!
The power of these water heaters is sufficient for the simultaneous operation of 1 - 3 water dispensing devices. All models are available in compact wall-mounted housings. The difference in the model options is the presence of electric ignition from built-in batteries, the letter “E” in the marking.
Instantaneous water heaters of the Vega series have a number of unique properties that have won the sympathy of buyers for these devices:
The price of Mora Top geysers does not exceed analogues, the same Hayes. Market value from 16 thousand rubles. Compared to analogues, Mora has higher consumer properties.
Before installing the speaker, you need to decide on the room and installation location. The room must have ventilation and the wall must be made of non-combustible material. Installing a column is usually straightforward and consists of the following steps:
Expert advice: Between the wall and the speaker body you need to lay a gasket made of non-flammable material!
Operating a water heater involves turning it on and setting the required temperature. For this purpose, there are two handles on the front panel of the device. The operation control handle has four positions:
The water temperature knob allows you to adjust water heating from a minimum of 25 degrees to a maximum of 55 degrees.
Good to know: the higher the heating temperature, the lower the water flow through the water heater.
The speakers are highly reliable and have a service life of at least 12 years. Customer reviews indicate that they rarely fail.
If the operating instructions are followed, then the main reason for failure is the formation of scale and salt deposits. In this case, the repair consists of flushing the water path and heat exchanger.
Over time, heating efficiency may decrease and traction may deteriorate. Possible reason consists in the deposition of soot and soot. Troubleshooting this problem involves disassembling and cleaning the gas path of the column.
If more complex malfunctions occur, especially in the gas path, you must contact service center, having qualified specialists and the necessary spare parts.
Gas water heater review Watch Mora Top Vega 10 E in the following video:
If it so happens that your house does not have hot water supply, but there is gas, then you need a gas water heater to heat the water. Experts from Price Expert analyzed the models of geysers that buyers were most interested in at the beginning of 2019, and selected the 10 best. Now you will learn about them. But first, let's choose a manufacturer.
The leading positions in popularity, reliability and build quality today are occupied by gas water heaters from the Czech manufacturer Mora Top. Its products never stay in stores for long, and therefore sometimes you just need to have time to place an order. Among foreign manufacturers of geysers, the always popular brands Bosch and Ariston do not lag behind. Products with a good price-quality ratio are offered at Russian market Zanussi and Hyundai. The best domestic producers traditionally represented by gas water heaters of the Neva and Ladogaz brands.
Mora Vega-10 is a new generation instantaneous water heater, characterized by compact dimensions, modern design and excellent functionality. This model guarantees maximum comfort of use and consistently high efficiency, thanks to which you will forever forget about problems with hot water. A number of design solutions ensure exceptional reliability of the device.
Minimum dimensions- this series of Mora geysers is characterized by its small dimensions, thanks to which the equipment is considered one of the most compact in its class. Mora Vega-10 is easy to install and does not require labor-intensive maintenance.
High comfort of use- user actions when operating the water heater are minimized. This model of the column is equipped with combined fittings from the German company Mertik, which guarantees that the column is turned on at a water flow of 2.5 l/min. This fitting allows you to automatically maintain the set temperature, even with changes in water pressure in the water supply. Important design advantage Mora Vega-10 is that the moving parts of the column do not function in a water environment, excluding leakage at the junction of water and gas fittings.
Economical- the Mora Vega-10 water heater provides highest efficiency for equipment of this class: 92%. The reduced volume of the heat exchanger allows you to heat flowing water 15% faster than any other gas water heater.
High reliability- the heat exchanger tubes have special turbulators that do not allow scale to settle on the internal walls. The column heat exchanger itself is made of tubes with a diameter of 18 mm, which prevents the deposition of salts and effectively cools the walls without overheating the casing.
Safety of use- the water heater has a whole range of safety systems, including a water temperature limiter (protection against overheating), a backdraft fuse for combustion products (prevents gases from entering the room in case of clogging chimney), flame fuse (for stable operation of the main and ignition burners), protection against starting the column without water.
You can find out more detailed information about this model and buy a gas water heater Mora Vega-10 on our website or from our sales department.
.jpg)
