IP101-1A-A1 thermal detector 54°C, with indicator and IP101-1A-A3 detector are used to detect signs of fire (increased ambient temperature). An alarm is generated when the temperature reaches environment threshold value. The detectors are designed for round-the-clock operation in closed heated rooms and are designed to work together with control and control devices with direct or alternating current loops.
Features IP101-1A-A1
IP101-1A-A1 thermal detector 54°C, with indicator and IP101-1A-A3 detector are used to detect signs of fire (increased ambient temperature). An alarm is generated when the ambient temperature reaches a threshold value. The detectors are designed for round-the-clock operation in closed heated rooms and are designed to work together with control panels with direct or alternating current loops. Features IP101-1A-A1 Microprocessor analysis of the temperature sensor signal. The detector periodically measures the ambient temperature and, when a threshold temperature value is reached, generates an alarm by increasing the current consumption. For easy control of operation there is a red LED indicator. In standby mode, the indicator gives short flashes at intervals of 6...8 s. In alarm mode, the LED indicator in the IP101-1A-A1 and IP101-1A-A3 detectors gives double and triple flashes, respectively, with a frequency of 1 Hz. This makes it easy to detect a tripped detector. The detectors receive power directly through the alarm loop, eliminating the need for additional power line wires. The design of the detectors ensures their connection to the alarm loop without observing polarity. Possibility of connecting fire alarm control and control devices “Granit”, “Karat”, UOTS-1-1A, “Kvarts” to fire loops without the use of external limiting resistors. The aesthetic design of the detector housing fits into the interior of any room. Thermal fire detectors
Siberian Arsenal IP-101-1A-A3 is a maximum fire thermal detector that is used to detect signs of fire (increased ambient temperature). An alarm is generated when the ambient temperature reaches a threshold value. The detectors are designed for round-the-clock operation in closed heated rooms and are designed to work together with control and control devices with direct or alternating current loops. The detector has a microprocessor analysis of the temperature sensor signal, periodically measures the ambient temperature and, when a threshold temperature value is reached, generates an alarm by increasing the current consumption. For easy control of operation there is a red LED indicator. In standby mode, the indicator gives short flashes at intervals of 6...8 s. In alarm mode, the LED indicator in IP101-1A-A3 detectors gives double and triple flashes, respectively, with a frequency of 1 Hz. This makes it easy to detect a triggered detector. Devices of this type receive power directly through the alarm loop, eliminating the need for additional power line wires. Possibility of connecting detectors to an alarm loop without observing polarity, as well as connecting fire alarm control and control devices “Granit”, “Karat”, “UTS-1-1A”, “Kvarts” to fire loops without using external limiting resistors. The aesthetic design of the detector housing fits into the interior of any room.Description Siberian Arsenal IP-101-1A-A3
Technical characteristics Siberian Arsenal IP-101-1A-A3
Thermal detector 54°C, with indicator
The fire thermal maximum detector "IP101-1A-A1" is used to detect signs of fire (increased ambient temperature). An alarm is generated when the ambient temperature reaches a threshold value.
The detectors are designed for round-the-clock operation in closed heated rooms and are designed to work together with control and control devices with direct or alternating current loops.
Specifications
Supply voltage polarity | free |
Rated response temperature | +54...+65 °С |
Response time when the temperature rises at a rate of 3 °C/min* | 700 ±120 s |
Interval between temperature measurements | 6...8 s |
Time to return to standby mode after removing the supply voltage, not less | 2 s |
Supply voltage range from the alarm loop, | 10...25 V |
Current consumption | 60 µA |
Residual voltage in “Fire” mode (internal), no more | 5.5 V |
Shell protection degree | IP30 |
Operating temperature range | -30...+76 °С |
Average time between failures of the device in security mode or disarming mode, not less | 70,000 hours |
Service life, not less | 10 years |
Any premises - office, store, apartment or warehouse - are constantly at risk of fire. Its cause can be anything - a short circuit in the electrical wiring, a malfunction of electrical appliances, spontaneous combustion of a material, or human factor. Any property owner wants to protect their property from destruction. For organizations of a certain type of activity, the presence of a fire alarm is prerequisite to open an enterprise and carry out work. A completely logical question arises: how to equip fire alarm on site inexpensively, reliably and in accordance with existing requirements. The answer to this question may be the installation of an IP 101-1A detector. This device combines reliability, simplicity and affordability.
Fire detectors IP 101-1A-A3 and IP 101-1A-A1 are intended to detect signs of fire in heated warm rooms. Innings alarm signal occurs when the temperature rises above the threshold specified by the sensor. The detectors have a 24-hour operating mode. Presentable appearance(a small cylinder made of white plastic) makes it possible to install them in premises of the highest status.
Detectors work together with other control sensors in the system security and fire alarm system. Their design provides the ability to connect to any DC loop.
Heat detectors IP 101 1A can be installed in the following rooms:
The devices operate only on heat, without reacting to light sources, smoke or gas.
The IP 101 1A detector is a compact device with a fairly simple but functional design
It consists of the following parts:
Space scanning is carried out automatically by periodically sending pulses to the thermoelement. When the control temperature is reached, the resulting pulse causes a short circuit in the circuit, the signal from which is sent to the control equipment. The LED lights up continuously, indicating the location of the triggered sensor.
Heat detectors of the IP 101 series compare favorably with heat sensors of other designs. They do not have fusible connections and bimetallic petals, which are not highly reliable and often give false signals.
In addition, these devices have the following features:
The design of the lid allows you to aesthetically and harmoniously place the device in various rooms.
Like anyone else technical product, heat detectors have their pros and cons.
The advantages of the product include the following indicators:
The disadvantages of products in this series include the following:
Despite minor disadvantages, IP 101 detectors are well-deservedly popular and in demand.
The IP 101 1A detector has the following specifications Things that potential buyers should pay attention to:
The manufacturer guarantees the detector for 36 months after installation.
The devices can be installed simultaneously with other control sensors, as well as after their installation. The number of detectors installed depends on the technical capabilities of the security system.
The devices are fastened to the ceiling, since in the event of a fire this is where the temperature is highest.
On a note: The sensor from the sensor is installed at a distance of no more than 5 m over the entire ceiling area.
Detectors can be mounted on any material. It can be concrete, wood, drywall or plastic. For soft materials Self-tapping screws are used for wood; for hard ones, plastic dowels and self-tapping screws are used.
After connecting the wires, the base of the housing is secured to the ceiling and the lid is closed. The devices in the circuit are connected in parallel.
Device maintenance is carried out quarterly and includes the following actions:
If a malfunction is detected, the device is sent to the manufacturer with appropriate explanations, and a new detector is connected in its place.
Fire thermal maximum detector IP101-1A-A1 is used to detect signs of fire (increase in ambient temperature). An alarm is generated when the ambient temperature reaches a threshold value. The detectors are designed for round-the-clock operation in closed heated rooms and are designed to work together with control and control devices with direct or alternating current loops.
Guarantee: | 12 months |