Design work- a difficult task, especially if you are doing it for the first time. Using techniques to create original interior and the atmosphere in the room, always requires experience and time. Today we will look at how to glue wallpaper for painting: videos and visual photo tips will become your reliable assistants.
Let's first choose the wallpaper to paint - we'll figure out how to glue them a little later.
Classification:
Vinyl coverings
Non-woven covering
So, how to glue glass wallpaper for painting? The main thing is to take into account the main point - before pasting the walls you will have to treat the surface with an acrylic or latex primer. In addition, you will need a special adhesive composition for heavy wallpaper.
Painting with a spray gun
An important part of the question of how to apply wallpaper for painting is the choice of adhesive composition.
Thus, ordinary paper sheets can be glued with a composition based on methylcellulose -. You can even cook the paste at home. But when working with heavy coatings, a special composition will be required.
If you don’t know how to glue York wallpaper or other types of heavy coatings, choose a PVA-based adhesive composition. It is particularly reliable and will help hold two-layer textured canvases not only on the walls, but also on the ceiling.
The operating technology itself is not much different from the usual one in the room.
Stages of work:
Note! The corners are covered with an overlap. One canvas is glued with a margin of 2-3 cm and covered with the second.
After the surface has completely dried, you can begin painting the finish.
For coloring we need:
Spread the paint layer evenly over the surface, moving along the sheets.
Do not apply paint to the same place several times, this will spoil the surface texture. Re-painting is carried out after the first layer has completely dried.
Wallpaper for painting allows you to update the interior without large-scale repair work. The ability to change color up to 8 times makes them an excellent solution for high-traffic areas (corridors and hallways), children's rooms and kitchens.
Wallpapers with unusual drawings, pleasant texture and stylish design may not always meet your expectations, since their quality is lost over time and the color fades. Those who strive to create stylish interior and to ensure that the wallpaper is preserved for a long time, people have long given preference to wallpaper for painting.
Decorating walls with wallpaper for painting has many advantages, since it not only provides the opportunity to update the interior, but also allows you to reliably protect the walls in your room. The use of such wallpaper allows you to save significantly, and the relief texture, characteristic of most collections, looks no worse in different types of interiors than wallpaper with bright patterns.
One of the most important stages in the process of decorating walls with such wallpaper is gluing, because the result of your efforts will depend on the correctness of this process. Video on how to hang wallpaper for painting, as well as some recommendations for choosing and preparatory work will help you cope with this task easily and quickly.
Before you find out all the intricacies of the process of gluing wallpaper for painting with your own hands, you should decide on their varieties, and also find out what type of wallpaper will be most suitable for your room:
All types of such wallpapers have some general properties: They quite practical and easy to use, can be repainted a large number of times and are harmoniously combined with other finishing materials.
Attention! Depending on the chosen material, the possible number of repaintings will vary: for example, paper wallpaper It is recommended to paint no more than three times, while for more durable wallpaper more than 5 paintings are considered optimal.
To learn how to glue and paint wallpaper for a certain type of paint, consult with specialists. The correctness of finishing work in your case will be influenced not only by the quality of materials, but also by the type of glue, the nature of the surface, external conditions, as well as the gluing process itself, which may differ depending on the structure of the wallpaper.
ABOUT preparatory stages before wallpapering the walls for painting, as well as about the features of this process, we will tell you further.
Pasting wallpaper for painting on any surface requires preliminary preparation. First of all, check the walls for unevenness and damage. All previous finishing materials should be removed from the walls.
Maybe, the surface will have to be leveled, and cracks and holes will have to be masked using putty. Next, the walls are cleaned of grease and dirt, and, if necessary, painted in one color (noticeable differences between shades can be noticeable even through durable wallpaper).
Further the wall is primed: for these purposes it is better to use an acrylic primer on water based. Other types of primers may prevent the adhesive from absorbing evenly. In addition, acrylic will help strengthen the wall and also allow you to get rid of dust and minor dirt.
Important! The priming process is carried out immediately before applying glue and finishing with wallpaper for painting the prepared surface.
When deciding how to glue wallpaper for painting in your interior, you should pay maximum attention to the choice of adhesive for finishing. The reliability of gluing, the strength and durability of the wallpaper, its service life and appearance. Since wallpaper of this type is glued for more than one year, you should not skimp on glue: give preference to not the cheapest, but reliable option.
The modern range includes many types of glue. So what glue for wallpaper for painting? fits better Total? In order not to make a mistake with the choice, focus on the type of wallpaper that will be used to decorate your room. For example, methylcellulose-based adhesive is suitable for paper coverings: it is intended for light-type wallpaper, so it will not disrupt the structure and appearance of such materials.
It is more difficult to choose heavy-duty wallpaper glue for painting. As a rule, factories that produce vinyl, non-woven and fiberglass wallpaper for painting also produce glue with suitable properties.
If you can't find desired type glue - give preference to PVA-based options. On the package different types This glue indicates which wallpaper it is best to use for: light or heavy.
The adhesive is applied to the wall or roll after priming the surface, and it is extremely important to follow all the features of this process indicated in the instructions or on the packaging.
Non-woven wallpaper for painting, as a rule, is not treated with glue: just apply it to required area walls. A few more important information about how to properly glue wallpaper for painting will help you cope with finishing works without the help of specialists.
How to glue wallpaper for painting on walls? This process consists of several simple but important steps.
So, step by step instructions:
Remember! During the gluing process, you should be careful: to prevent glue streaks and the formation of folds on the surface of the wallpaper, apply the glue gradually, moving from top to bottom. In addition, thanks to this technique, you will have time to glue the wallpaper before it dries completely.
Smoothing the glued sheet should be done from the center to the sides of the sheet: This will release all the excess glue and get rid of any air bubbles. It is advisable to carry out this process using soft textile materials that will absorb the remaining adhesive mass. If after gluing you find that the canvas is placed unevenly - don’t be afraid to remove it from the wall and re-glue it: Paintable wallpaper is resistant to such processes.
After gluing all the wallpaper sheets make sure that there are no excess fabric residues at the junction of walls or the border of the floor. Trimming excess materials can be done using a spatula: set it as a limiter and draw along a smooth border with a stationery or construction knife.
Gluing wallpaper for painting in the corners requires a lot of concentration: two canvases should overlap each other, but There should be no too large or crooked sheet fragments left at the junction, since cutting off unnecessary parts will be problematic. We advise you to read about.
If necessary, make an even cut in the middle of the overlapped panels: then you can remove the top and bottom strips and smooth the joint.
A construction knife can also be useful if there are sockets: since Before the gluing process, all sockets are removed, just make a corresponding hole in the wallpaper, release the wires - and install the socket in place.
After gluing and complete drying of the wallpaper, you can begin the painting process.. Using quality paints, you can disguise seams and joints, creating a holistic and harmonious covering for the walls.
If you wish to create unusual design, gluing will be an advantage: the protruding parts of the pattern can be decorated in a different color, creating spectacular accents on the walls.
If the wallpaper is hung well, you can decorate it at any time without additional preparatory measures. It is very convenient and fast, which is why many people prefer this type of wallpaper for walls.
Now you know how to hang wallpaper for painting, what to look for when choosing it and how to achieve excellent result in your interior. You can understand this process in more detail using the video of wallpapering for painting.
Paintable wallpaper is one of the most popular options for interior decoration. If you want to change a boring interior, there is no need to remove such wallpaper from the walls; you just need to repaint it. Moreover, new layers of paint can be applied multiple times.
Along with fiberglass wallpaper, non-woven wallpaper is the most popular among buyers. Such coatings are made from non-woven material containing cellulose and synthetic fibers. The products have a fine texture and are most often applied to foam vinyl. Non-woven wallpaper has certain pros and cons, and the advantages are much more significant.
Advantages:
Flaws:
They are made from fiberglass - a very durable material, which contains the following elements:
Advantages of glass wallpaper:
The disadvantages of glass wallpaper include the following qualities:
Most financially accessible finishing material. Made from two-layer paper. To create texture, they use embossing technology using wood shavings.
Wallpaper of this variety differs from others in its high resistance to mechanical damage. Great for rooms where small children or pets live.
The strength of the material is ensured by a layer of vinyl (made from polyvinyl chloride). Another advantage vinyl base- possibility of repeated repainting of the surface.
Wallpaper of this type is distinguished by high decorative properties. Most often they are made with imitation of plant relief in the form of stucco. They are made using rosin, wood flour, wax and chalk.
The advantages of linkrust include the following characteristics:
Disadvantages of linkcrust:
When choosing wallpaper for subsequent painting, take into account the following circumstances:
Wallpaper is chosen taking into account the purpose of the room. For example, vinyl or paper sheets are great for a children's room or master bedroom. The former are highly durable, while the latter are environmentally friendly and inexpensive. Also a good option for a children's room is beautiful non-woven wallpaper made from wood waste.
It is most practical to purchase glass wallpaper or non-woven coverings for the kitchen. The same products will fit well in the hallway, toilet, corridor, kitchen and dining room.
Most wallpaper for painting has a structure and pattern. The attractiveness of wallpaper after painting depends on the severity and beauty of the structure. Several painting cycles are allowed. However, keep in mind that the texture becomes less noticeable after each application of paint. The most durable in this regard are considered to be glass wallpaper, which can be repainted 8-10 times.
Smooth canvases without embossing are also used for painting. To treat walls covered with such wallpaper, finishing putty is used. As a rule, smooth wallpaper is chosen by those who want to create an interior in the style of minimalism or Scandinavian classics.
First, close all the windows and doors to the room. This is necessary to avoid drafts. To complete the work, the following materials and equipment are required:
There is no need to level the walls before painting, as the paint will mask all minor defects. The surface is carefully primed with 2-3 layers of sealant. This will improve the adhesive properties of the coating. The glue is also diluted, but not too much - it should be thick.
Painting wallpaper without a pattern will not be difficult, but if it is available, you will need a fitting card (it is located on the packaging). The map also contains information about the interval after which the pattern is repeated. When cutting wallpaper, move the new roll to the required distance. The figure below shows typical material markings.
Work order:
Rolls of fiberglass are most often made in the form of photo wallpaper. The components of the product (dolomite, limestone, soda and quartz) are combined with a paper base, resulting in a finishing material with high consumer characteristics.
Sticking fiberglass wallpaper We carry it out in several steps:
Paper-based wallpaper is usually equipped with a pattern. Although such canvases are inexpensive, gluing them is associated with difficulties. Inept actions can lead to the appearance of folds or bubbles on the canvas. At the same time, properly glued wallpaper is durable, as it has a two-layer structure.
An important feature when gluing paper wallpaper is the need to treat the sheet itself with glue, and not just the wall. We carefully apply the coated sheet to the wall and slowly - using a roller - smooth it out uniform movements. If you work with a spatula rather than a roller, the likelihood of bubbles appearing can be significantly reduced. However, you need to be careful not to tear the sheet.
When gluing smooth paper wallpaper, you will need to prepare the walls, otherwise all the defects on them will be noticeable. Preparatory activities include the following actions:
If there are significant cracks on the surface, we seal them with putty. Wallpaper on a paper base is glued end-to-end - without adjustment. They usually dry within 24 hours.
Doing it yourself is no less important a task than purchasing wallpaper. Choosing the wrong paint will lead to damage to the expensive material.
Water-dispersion and water-based paints are suitable for all types of wallpaper. Present on the market paints and varnishes of this type containing polyvinyl acetate, acrylates or silicone. The highest quality and most expensive paint is silicone based. Water-soluble paints do not contain complex aggressive organics, which are not only undesirable for wallpaper, but also release toxins.
Water-soluble compositions have a basic White color. If necessary, the paint is tinted to the desired shade using pigment substances purchased separately. The entire volume of tinted paint should be prepared immediately, and not in parts. If this rule is neglected, it will no longer be possible to repeat the desired tone, since the slightest change in the proportion of components changes the color.
Do not use alkyd or oil-based paints and varnishes for painting wallpaper. They are distinguished by high viscosity and density of structure, and a pungent odor (due to the presence of organic chemicals in them). Alkyd and oil paints lay on the surface in a thick layer, as a result of which the natural structure of the wallpaper is disrupted and its ability to “breathe” is reduced.
Not recommended for use foam rollers for painting canvases. After their use, small air bubbles remain on the surface, which is not only unsightly, but also leads to further deformation of the coating.
Paint the wallpaper in at least two layers. In some cases, especially when we're talking about For inexpensive coatings, you will need to apply paint three to four times. The best option tool - lint roller middle length, made of sheepskin or velor. To paint corners and hard-to-reach areas, you need to have a brush.
For vinyl and non-woven wallpaper, it is best to use acrylic or water-based paints. Oil-based ones are unacceptable because they contain an organic solvent that destroys the material.
Advice! To avoid damage to the material, it is recommended to first apply a test coat of paint on a small piece of wallpaper and wait for it to dry. Moreover, one more nuance should be remembered: the dried coating will be a slightly different shade than the liquid dye.
The roller is lowered into a container of paint and wait until the tool is saturated. Strokes are made from the corner of the room - vertically. Movements should be smooth, without significant pressure. If, after the surface has dried, there are still insufficiently painted areas on it, re-painting will be required. The second and subsequent layers are applied only after the coating has completely dried. Detailed Process available in separate material.
They begin only 2-3 days after gluing them. The reason for this break is the need for the material to dry completely.
Acrylic or latex paint is best suited for glass wallpaper. Wallpaper with a semi-gloss effect looks very good. You should not use too thick paint or overdo it with the number of layers, as this can easily level out the texture.
Before applying paint to glass wallpaper, it is recommended to thoroughly prime the surface. The primer will help create a coating that holds the fiberglass particles in the structure of the material. As a result, fiberglass becomes completely safe for residents.
As with other types of wallpaper, start painting from the top corners of the room. You should not try to paint the entire wall area at once. It is more correct to treat the surface in small areas.
Fiberglass wallpaper provides the craftsman with significant opportunities for creativity. To create different visual effects, stencils and curly rollers are used.
Used for painting paper-based wallpaper water-based paint. Apply it with a roller or spray gun. With the help of the latter, you can work much faster.
Paint after the glued canvases have dried. To create a full coverage, you will need two layers of dye. The second layer is applied only after the first has dried. Just as in the case of other types of wallpaper, it is possible to use stencils, a figured roller, or paint with a gradient effect.
In some cases, a third layer is also made - varnishing. Thanks to the varnish layer, increased surface resistance to moisture is ensured. However, the creation of three-layer coatings requires high qualifications from the worker, since defects during varnishing will result in the visibility of all surface defects.
To make the room look original, you can experiment with colors, shades, relief, texture and patterns.
If desired, you can combine colors, but this must be done taking into account the rules of the palette:
Vertical boundaries make it possible to zoning space. In addition, any vertical lines visually increase the height of the ceiling. The boundaries between color areas can be left undecorated or marked with paper or plaster borders, mosaics or moldings.
You can transform your apartment unusual combination tones For example, three walls are painted in light shades, and the fourth is highlighted with a bright, saturated color.
Structural wallpaper can be painted in two colors. The base is one, and on top, according to the relief pattern, another. Thanks to this, the structure of the coating is emphasized.
If desired, you can create various designs on the wallpaper in the form of circles, diamonds, squares, monograms, etc. For such purposes, smooth wallpaper without structural patterns is used. The walls are painted white, and multi-colored patterns are applied on top. To mark the surface, use masking tape and stencils. You can also paint the wall manually using a brush.
Decorative Venetian plaster is a great way to decorate walls. The cost of such plaster is high. In addition, qualifications are required to perform the work. A simpler option is wallpaper with imitation Venetian plaster. This solution is a non-woven covering with vinyl coating. Since the top imitating layer is thick, the effect of multi-layer Venetian plaster with an interesting structure is achieved.
Advantages of wallpaper with Venetian plaster:
Currently, the main trend is the use of materials that imitate natural textures. Moreover, this rule applies to all styles - both classics and modern solutions.
The most popular styles are:
The process is similar to similar work on walls. However, there are some peculiarities. It is better to cover the ceiling with thick non-woven or vinyl sheets. This approach allows not only to solve decorative problems, but also to prevent water from entering from the upper floors in the event of leaks.
For painting wallpaper on the ceiling use water-dispersion paint. It is important to dilute it to such a consistency that it is easily absorbed into the roller and does not flow from it onto the floor. In this case, the dye should not be too thick, as this will leave unsightly marks on the surface.
With the help of non-woven wallpaper for painting you can create a special coziness and unusual interior. Moreover, this applies not only to residential, but also to work premises. This material is practical and environmentally friendly. A room covered with such wallpaper will be transformed beyond recognition. It will look truly stylish and beautiful.
Non-woven fabric is a very practical and truly durable material, in its essence very reminiscent of paper. It contains cellulose fibers, however, despite this, it differs from conventional paper in certain features.
Non-woven wallpaper fabrics often consist of two layers: non-woven fabric and polyvinyl foam. Thanks to your technical specifications The first layer is able to absorb paint and glue, while the second one holds them perfectly.
This finishing material is currently very popular due to a number of advantages:
Non-woven wallpaper is a unique finishing material with many advantages. There are two types of wallpaper, in the manufacture of which non-woven fabric is used.
If the substrate is made of non-woven fibers pressed in a special way, followed by spraying of foamed vinyl, such fabrics are called non-woven vinyl.
There are also completely non-woven fabrics, for the manufacture of which embossed non-woven fabric is used. The cost of such wallpaper is much higher and you can’t find it in all stores.
Many people are interested in how to hang wallpaper for painting with their own hands and is it even possible?
The process of covering a room with non-woven wallpaper is quite simple. And it is not at all necessary to resort to the help of specialists. You just need to purchase suitable glue, a brush with which to apply it, as well as a special roller, plastic spatula or soft cloth.
Hanging wallpaper for painting with your own hands begins with preparing the working surface. To do this you need:
Next, you should prepare according to the instructions, and also cut the strips to the desired length. To do this, take the required height of the room and add about 5 cm to it. In this case, it is imperative to ensure that the drawing or pattern matches, if any.
Now let's look at how to glue wallpaper for painting on walls.
When smoothing the wallpaper, all movements should occur from the middle to the edges It is important that the first strip is glued strictly vertically. To do this, use a plumb line or level. Next, apply glue to the surface of the wall (cover the canvas itself adhesive composition not necessary) and attach a strip to it. After this, carefully level the canvases and expel the air from under them using a special roller, brush or soft fabric. All movements are performed from the middle to the edges. There should be no folds or bubbles. After gluing one strip, move on to the next.
Any excess glue that remains on the front side of the canvas must be immediately removed with a rag.
After the walls are pasted over, you need to wait about a day for them to dry completely. At this time, changes in room temperature and drafts should be avoided.
There are non-woven wallpapers that cannot be painted, as well as those that are intended to be painted. The good thing about the second option is that you can choose the color you want and repaint them many times with your own hands. The painting of non-woven wallpaper itself is quite simple, and thanks to the use in various ways and painting techniques, a complete transformation of the room is possible.
Some wallpapers have a smooth structure, others impress with their special relief. If the wallpaper is smooth, you can create paintings on it yourself if you wish, but the textured surface itself looks stylish and beautiful.
You can color the paint yourself or purchase ready-made paint in the required color in specialized stores. For non-woven wallpaper, it is better to choose water-based paints. Acrylic and latex mixtures are also great.
How much paint you need to paint a room depends on the wallpaper you choose, as well as the paint itself.
One of the most common questions that arises when painting wallpaper is how long should you wait after hanging? You can paint non-woven fabric for painting or any other wallpaper fabric no sooner than after 24 hours.
To paint you will need a paint tray, a roller, a brush and, in fact, the paint itself. It must be mixed thoroughly so that the shade is uniform.
The paint is poured into a tray and then the roller is soaked with it. it is necessary from top to bottom. It is quite possible that the first layer will not apply completely evenly. That is why you will have to reapply the paint. In this case, each subsequent layer should be applied only after the previous one has completely dried.
Coloring should be done in one go. Only in this case will the coating be as uniform and uniform as possible.
To paint corners, slopes, and walls near the baseboard, use a brush or small roller. All areas that do not need to be painted (slopes, doorways, etc.) must be sealed masking tape. It will save them from possible contamination. After the paint has dried well, remove the tape.
If you want to repaint non-woven wallpaper with your own hands for painting, you just need to old paint apply a new one. If the room is painted in more light color, before applying the desired shade, it is better to apply a layer of white paint.
How many times non-woven wallpaper can be repainted depends on its quality. Usually this is 5-7 procedures, but it is worth remembering that after each coloring the pattern and relief may gradually blur.
Non-woven wallpaper for painting can be painted in different ways.
The first method is traditional, in which the front side of the wallpaper is painted. As a result, it is possible to obtain a completely uniform color.
The second method involves coloring the material from the reverse side. By using this method manages to give the relief surface a special airiness. The thing is that in those places where there is no polyvinyl, the paint appears on front side, and where he is, she is not visible. Thanks to this coloring, it is possible to create truly three-dimensional designs, and the surface itself looks simply magnificent. A special feature of using this technique is the need to paint the canvases even before gluing the wallpaper for painting.
Another unusual option is to paint the walls themselves. In this case, the color will be interesting to shine through the wallpaper. The main thing here is to choose thinner fabrics.
You can also leave the wallpaper completely unpainted. Interesting option– tinting individual convex parts or spraying paint over an already created background with a spray gun. You just need to think in advance what effect you want to get.
Don't be afraid to experiment and look for new ways of coloring. As a result, you will create a real work of art with your own hands.
Tsugunov Anton Valerievich
Reading time: 5 minutes
A well-known saying says: “repairs cannot be completed, they can only be stopped.” Therefore, having gone through the complete finishing of the apartment once, next time you want to get by with minimal cosmetic work. An excellent opportunity to update the interior in the future, without immersing yourself in a full-fledged renovation, is provided by covering the walls and ceiling with wallpaper for painting. Also, this type of coating is indispensable when solving the problem of “wall painting” for growing artists. At the same time, it remains possible to embody a variety of interesting design ideas. Let's find out how to glue wallpaper intended for painting, as well as how, with what and when to paint it.
When starting to work with modern coatings for multiple painting, it is worth considering some important points:
The final result directly depends on the quality of the working surface, which must be smooth, dry and clean. Prepare the wall as follows:
Advice! If the differences in height or the curvature of the corners are too great, it is better to use drywall when leveling.
To ensure that the gluing process goes quickly and without unpleasant surprises, the work surface should first be marked and the wallpaper should be cut.
Important! It often happens that the fiberglass fiber crumbles during cutting, so you need to act carefully with a sharp tool (scissors or a breadboard knife). When working with such material, you should use a respirator or bandage, gloves and closed clothing.
Note! If adjustment of the pattern/relief is required, it must be done at the stage of cutting the wallpaper sheets.
Paintable wallpaper differs from ordinary paper-based wallpaper in its density and thickness, which brings its own specifics to the gluing process.
Advice! It is important not to leave uncoated areas on the paper, which will turn into air bubbles after the wallpaper dries. It is convenient to use glue with an indicator. A special dye added to the composition, most often blue or pink, helps control the uniformity of application. After drying, the glue becomes transparent. The brands Metilan, Kleo, Pufas have such compositions.
Wallpaper for painting is glued end-to-end, so each subsequent sheet is attached as tightly as possible, since the paper shrinks slightly when drying.
Working with non-woven and glass wallpaper is easier than with paper. Such fabrics do not tear, do not stretch and do not need to be coated with glue.
Note! While gluing and drying the wallpaper (at least 24 hours), drafts should be avoided in the room.
Let's figure out how to properly glue wallpaper in difficult areas - in corners, near door and window openings.
Regardless of the coating material and the type of corner (internal or external), the wallpaper in these places is glued overlapping.
After drying, a neat invisible seam is obtained.
