How to glue wallpaper on crooked walls. Pasting curved walls and corners
Since not all walls and corners, especially in old houses, are straight, many people ask how to glue wallpaper on curved walls.
In this article we will try to answer these and related questions, and also analyze which wallpaper is suitable for curved walls.
Because the following information is specific, it may not apply to all cases.
And if your walls are smooth and the corners are perfect, just skip this article and read something else on our website wallpaper-steny.ru.
Before gluing, you should try to level the walls and corners as much as possible.
The smoother the surfaces are, the easier it will be to wallpaper!
2. At the second stage, it is important to choose the right wallpaper for curved walls.
The best option would be thick vinyl or non-woven fabrics with a matte or voluminous, but independent pattern.
NOT suitable for curved walls and corners:
3. To decide how to glue new wallpaper on curved walls, it is better to start from the window.
In this case, the first sheet should be glued exactly along a vertical line.
To apply perfect markings, use a level and a simple pencil.
4. The first sheet of wallpaper in a room with crooked corners is glued to the wall adjacent to the window so that an overlap is formed on the “ window wall» 3 centimeters.
5. The second strip is glued to the wall with the window and slightly overlaps the emerging section of the first sheet.
Take a longer ruler (or spatula) and apply it to the line of intersection of the second sheet with the first.
Using a knife along the ruler (or spatula), a deep cut is made in one go, for which the knife is not removed along the entire cut line, but only placed below the ruler.
IMPORTANT – the cut must be performed in one go, without removing the knife!
7. When the cut is made along the entire height of the canvases, you can remove the upper and lower cut sections by aligning the first or second sheets of wallpaper with the joint.
The joint should be smooth.
And to avoid mistakes, you can try to trim on some stand - on a clean and empty section of the wall, for example.
The quality of the pruning is very important and you only have one try!
The main thing is to monitor the vertical position of each subsequent canvas and make the necessary cuts in the corner areas.
9. You can hide unevenness in the floor area using a small wooden or plastic skirting board for the floor.
10. Irregularities in the ceiling area are hidden using baguettes or panels.
Since the above was about non-woven or vinyl wallpaper, which looks luxurious and expensive, it is better to give preference to gypsum or wooden carved ceiling plinths.
If you use cheap foam plastic ones here ceiling skirting boards, their lack of integrity and cheapness can ruin the whole picture.
11. When gluing wallpaper to curved walls and corners, you should make sure that the joint does not lie exactly in the corner.
If this happens, then it is extremely difficult to adjust the evenness of the joint along an uneven corner line (how to mask joints).
As an option, glue the adjacent wall with a slight overlap over the problem area and trim as described above.
If all of the above procedures seriously frighten you, if you have doubts about own strength, you could hire a team of specialists.
At the very least, experienced workers will make curved walls and corners as invisible as possible. And along the way, you yourself will learn a simple technique for gluing wallpaper on uneven surfaces.
Is it possible to glue wallpaper over old wallpaper?
: how to glue paper wallpaper. : gluing paper wallpaper
What wallpaper to glue on the ceiling. Choosing wallpaper for the ceiling
What to wash with vinyl wallpapers
How to glue wallpaper on drywall. Preparing drywall for wallpaper
How to glue non-woven wallpaper. Features of gluing
How to glue paper wallpaper
How to hang vinyl wallpaper on non-woven backing (step by step)
http://oboi-steny.ru
There are many shortcomings that spoil the walls and complicate repairs: cracks, unevenness, remnants of old coatings.
Ideally, the surface is carefully prepared before wallpapering.
But if the defects are not clearly visible and there is no time for leveling, you can use several solutions that will help hide imperfections and speed up work. Let's figure out how to choose the right wallpaper for uneven walls.
WALLPAPER VICTORA STENOVA GRAFFITI 998174
If the walls are not even, then you should give preference to wallpaper with a pattern. Plain coatings will only highlight all the imperfections and spoil general form rooms.
Abstract, a chaotically located pattern is best suited for uneven surfaces. It will divert attention to itself, and the imperfections of the walls will be almost indistinguishable.
The right choice would be wallpaper with small patterns, for example, flowers or a monogram. However, a pattern that requires matching the pattern should be avoided, otherwise the joints will further highlight the recesses and hills on the walls.
Wallpaper with geometric patterns is contraindicated for non-ideal surfaces. Any distortion of straight lines will immediately catch the eye and indicate all the shortcomings.
Another important question is how to choose the color of wallpaper for uneven walls. Light shades have the opposite effect: they increase the visibility of flaws. Therefore it is better to choose dark or rich colors . If such wallpaper is difficult to perceive and seems too gloomy, you can use a combination.
A bright accent strip covers that section of the wall where the unevenness stands out most clearly, and discreet wallpaper is glued to the even parts.
WALLPAPER BRAVO STEIN 80583BR23
Regular smooth wallpaper does not cope well with surface imperfections, but textured ones can hide them more effectively. Such wallpapers include varieties of vinyl and non-woven coverings and photo wallpapers. The most important thing is the convex pattern.
Foamed Vinyl performs the task perfectly. The dense base and voluminous relief of such wallpaper will mask flaws and decorate the room. Hot stamping also suitable for such cases. These coatings are durable and have a textured surface, which means imperfections will be completely invisible.
Non-woven wallpaper for painting- an indispensable assistant in repairs. You can choose different relief patterns and paint them in suitable color. In this case, the unevenness will visually disappear, and the walls will appear smooth.
Wallpapers and photo wallpapers, imitating natural textures, will cope well with problematic surfaces. Coverings imitating stone, brick or plaster create a special stylistic mood in the room and turn the disadvantages of the walls into advantages.
It is important that such wallpaper be matte. The play of light and shadow on glossy wallpaper will make unevenness visible.
WALLPAPER MIRABELLA ANACAPRI 1 37301
Wallpapers differ in the density of the material from which they are made, which means they have different masking abilities. Single-layer paper wallpaper is the most thin version, so it's not The best way eliminate wall defects. For such cases, duplex, consisting of two layers of thick paper, is more suitable. These coatings are inexpensive and easy to use.
The properties of vinyl and non-woven wallpaper are much better. Coverings with a vinyl layer, especially foam and hot stamping, have increased density- 200-250 g/m2, and for some manufacturers it can reach up to 400 g/m2. They are easy to clean, resistant to damage, but most importantly, they hide uneven walls.
Non-woven wallpaper is heavy and has a significant thickness. This means that they will not only last for many years, but will also save time on preparing walls and sealing small cracks.
There is little difference between how to glue wallpaper on uneven walls and pre-prepared ones. But there are several nuances that affect the final result:
Walls with defects and unevenness will not hurt high-quality repairs And beautiful interior. The most important thing is a competent approach to the choice of finishing materials and taking into account the characteristics of their gluing.
If this question comes to your mind, it means you don’t have the time, desire, or money to properly prepare the walls for wallpapering.
Not the best the best option, but you need to get out of the situation... A few tips from professionals with many years of experience who have seen and different walls and different wallpapers.
We asked the question: “What wallpaper to glue on uneven walls?” several masters and systematized the answers.
First, about what kind of wallpaper to glue, but crooked walls are strictly forbidden:
Now let’s talk about what options remain in stock so that, despite the uneven walls, the pasted wallpaper will hide the deficiencies of the preparation and, in general, everything will look decent:
That's all the main ones
From the author: summer in in full swing, everyone is relaxing and enjoying the sea, but you have to urgently correct repair defects and figure out how to hide uneven walls? We welcome you to our website, we are ready to help and tell you about the main design secret. Let's work on the mistakes and determine which wallpaper to choose for uneven walls! Let's try to find a solution to the problem together.
First you need to decide on the design, layout and choice of materials, and finally - on the final type of finishing: will it be plaster, drywall or decorative wallpaper. Agree, this sequence corresponds to most construction repair work. It’s quite difficult to decide on what to choose, especially with the current volume of products offered. building materials, as well as information articles on the World Wide Web. We will try to help you with this. You have already taken the first step - you have chosen our website!
Smooth walls are very good, because such a surface makes it quite easy to carry out Finishing work of any complexity, and even more so. But, as offensive as it may be, very few can boast of perfect flat surface walls in their premises, especially in standard apartments old building.
Important: in a situation with large differences and obvious defects on the walls of your rooms, you need to approach the repair work with the proper consistency and thoroughness, so to speak. Uneven walls can and should be leveled! If the defects are minor, then you can save money and time and use design secrets.
When choosing wallpaper in a situation where there are uneven walls, it is important to be guided not only by personal taste and preferences regarding color range and style, but also the problem of defects. Manufacturers, of course, are aware of the existence of this problem and are ready to offer a fairly wide selection of wallpaper that can be glued to problem walls without much difficulty. After all, due to their characteristics, appearance and performance properties, they are suitable for gluing to any surface, including those with protrusions, bumps and depressions. Texture and pattern will help hide and camouflage defects and unevenness of the walls. So all that remains is to decide which wallpaper to choose.
What do our people advise us? experienced craftsmen, what wallpaper do they prefer during renovation to hide unevenness? We invite you to listen to the recommendations:
Let's look at photos and the most common types of wallpaper that can be successfully used for problem walls.
If you glue ordinary paper wallpaper to walls with defects, then all these defects will clearly appear. Manufacturers offer to use a special type of paper wallpaper called duplex. They are made from two thick layers of paper, which are pressed into one piece and feel like cardboard. They also contain various types of embossing and often repeating patterns, which makes it possible. Among other things, they hold their shape well and stick perfectly to an uneven wall, because they do not need to fit tightly over the entire surface. All potholes and bumps will be hidden! And such wallpapers are very affordable in price; any average person can afford them.
Important: An additional property of the duplex is environmental friendliness, which allows it to be used in a nursery and bedroom!
Source: this-wallpaper.ru
Durable and bright. Vinyl samples are a good alternative to duplex wallpaper, although they are already in a higher price segment. They will serve you for a long time, remaining bright and fresh. In addition, on bright wallpaper The unevenness of your walls will not stand out so much, and the thickness and deep texture will allow you to hide the most complex defects. Among other things, they have the ability to copy texture natural materials for finishing, which will give your room a noble, “rich” look.
Source: alberomarket.ru
From the total mass of vinyl wallpaper that is used to decorate walls with uneven surfaces, the following areas can be distinguished:
Source: remontiruem.com.ua
Source: kuhniclub.ru
Source: chipak71.ru
A good material for hiding unevenness is also non-woven fabric - a combination of paper and fabric components. It has a high density and relief embossing on the surface. Wallpaper made from it is very dense and hard. Sometimes a decorative detail is added - a vinyl backing. Non-woven wallpaper comes in white and colored. Most often they are made white, ready for further coloring. Painting is done after gluing the sheets to the wall. Painted wallpaper has a matte appearance, which further helps hide uneven surfaces.
From the author: Summer is in full swing, everyone is relaxing and enjoying the sea, and you have to urgently correct repair defects and figure out how to hide uneven walls? We welcome you to our website, we are ready to help and tell you about the main design secret. Let's work on the mistakes and determine which wallpaper to choose for uneven walls! Let's try to find a solution to the problem together.
First, you need to decide on the design, layout and choice of materials, and finally - on the final type of finishing: whether it will be plaster, drywall or decorative wallpaper. Agree, this sequence corresponds to most construction and repair work. It is quite difficult to decide on what to choose, especially with the existing volume of construction materials on offer, as well as information articles on the World Wide Web. We will try to help you with this. You have already taken the first step - you have chosen our website!
Smooth walls are very good, because such a surface makes it quite easy to carry out finishing work of any complexity, and even more so for wallpapering. But, sadly, very few people can boast of a perfectly smooth wall surface in their premises, especially in standard apartments of old construction.
Important: in a situation with large differences and obvious defects on the walls of your rooms, you need to approach the repair work with the proper consistency and thoroughness, so to speak. Uneven walls can and should be leveled! If the defects are minor, then you can save money and time and use design secrets.
When choosing wallpaper in a situation where there are uneven walls, it is important to be guided not only by personal taste and preferences regarding colors and style, but also by the problem of defects. Manufacturers, of course, are aware of the existence of this problem and are ready to offer a fairly wide selection of wallpaper that can be glued to problem walls without much difficulty. After all, due to their characteristics, appearance and performance properties, they are suitable for gluing to any surface, including those with protrusions, bumps and depressions. Texture and pattern will help hide and camouflage defects and unevenness of the walls. So all that remains is to decide which wallpaper to choose.
What do our experienced craftsmen advise us, what wallpaper do they prefer during repairs to hide unevenness? We invite you to listen to the recommendations:
Let's look at photos and the most common types of wallpaper that can be successfully used for problem walls.
If you glue ordinary paper wallpaper to walls with defects, then all these defects will clearly appear. Manufacturers offer to use a special type of paper wallpaper called duplex. They are made from two thick layers of paper, which are pressed into one piece and feel like cardboard. They also contain various types of embossing and often repeating patterns, which allows you to hide unevenness. Among other things, they hold their shape well and stick perfectly to an uneven wall, because they do not need to fit tightly over the entire surface. All potholes and bumps will be hidden! And such wallpapers are very affordable in price; any average person can afford them.
Important: An additional property of the duplex is environmental friendliness, which allows it to be used in a nursery and bedroom!
Source: this-oboi.ru
Durable and bright. Vinyl samples are a good alternative to duplex wallpaper, although they are already in a higher price segment. They will serve you for a long time, remaining bright and fresh. In addition, on bright wallpaper, the unevenness of your walls does not stand out so much, and the thickness and deep texture will allow you to hide the most complex defects. Among other things, they have the ability to copy the texture of natural finishing materials, which will give your room a noble, “rich” look.
Source: alberomarket.ru
From the total mass of vinyl wallpaper that is used to decorate walls with uneven surfaces, the following areas can be distinguished:
Source: remontiruem.com.ua
Source: kuhniclub.ru
When choosing wallpaper, be sure to determine the difference in the unevenness of the walls. This can be done using building level or plumb line. If during measurements the differences were more than 30 mm, it is better to choose another method for finishing the walls. For differences of 30-50 mm, it is better to pre-level the surface using finishing mixtures.
If you have limited funds for repairs, it is better to purchase double-layer paper wallpaper. They are not only quite dense - they have convex embossing. Pasting walls with such wallpaper visually smooths out unevenness, the walls acquire a good appearance and no longer irritate those living in the apartment.
When the amount allocated for repairs allows you to purchase higher-quality finishing materials, you should consider types of wallpaper such as vinyl and non-woven. They are distinguished not only by their good density, but also by their beautiful appearance, which both visually and physically allows the walls to be leveled.
Vinyl wallpaper is more shiny and smooth in appearance, while non-woven wallpaper looks more noble. Therefore, it is more often recommended to use non-woven wallpaper in living rooms and bedrooms, and vinyl wallpaper in kitchens or hallways.
Vinyl wallpaper may contain various additives in the outer layer - metal particles, mica powder, artificial silk fibers. Foamed vinyl is not only aesthetically pleasing, but also adds color and texture to the walls. There is also a washable type of wallpaper, but it should not be used for uneven walls because the surface is too smooth and shiny - the shine will shimmer and expose defects even more.
Due to the dense laying, wallpaper can best hide uneven walls. This finishing material can be either ordinary or intended for painting. If in the future it is decided to change the wallpaper, when removing it from the walls only the top paper layer will be removed. The bottom one, non-woven, will remain. Thus, without labor-intensive applications of a leveling mixture, the surfaces will be prepared for new renovation.
For gluing uneven walls, vinyl wallpaper with a matte surface is best suited; it is good if its base is non-woven. When gluing them, you will need to apply glue not to the wallpaper itself, but to the wall - this is more convenient. You need to carefully glue the first canvas - for this it is better to use a level. It is important to choose the right adhesive that is designed for gluing this particular type of wallpaper.
Liquid wallpaper is a universal material. Easy to apply, lasts a long time and has incredible decorative characteristics. To give aesthetic properties appearance Fillers in the form of granules, glitter and dyes are added to the wallpaper. The finished mixture is dry small flakes, soluble in water, which form a textured or smooth coating on the surface. The main advantage of liquid wallpaper is that it can be applied to any surface; it is important that it is well prepared.
The walls must be made as even as possible; their composition is heterogeneous, and on the surface there may be remnants of the old coating, glue, putty, self-tapping screws and self-tapping screws. Applying liquid wallpaper to an uncleaned, wet or uneven wall will cause rust, stains and stains to appear on it over time. yellow spots.
Important! Level the surface liquid wallpaper You can use layers no more than 3 mm thick, otherwise holes will form and all the flaws will appear.
Before working with the material, the wall is painted with a substrate (concentrated primer) in 2-3 layers to protect the wallpaper from everything on and inside the wall. It is better to choose a substrate that is odorless and quick-drying. The first layer is strongly absorbed into the wall and has no effect, so the painting should be uniform, without “bald spots.”
Liquid wallpaper can be applied to painted walls. If you take into account some rules, the result will be quite good. The first is to remove rust on the wall water-based paint is not suitable, since through it the yellowness will appear again over time. Oil or nitro paint for walls is not the best good decision, they will not “breathe”. For better adhesion to liquid wallpaper, small amounts of PVA glue are added to the paint.
Without preliminary preparation, liquid wallpaper will not stick to a painted wall. Before applying, you need to check how firmly the paint sits - whether it is peeling off. If there is plaster underneath, you need to tap the wall and check if it is coming off. When tapping on the problem area, a booming sound will be heard. Identified defects must be repaired immediately to avoid problems in the future.
If the paint and plaster hold up well, you will need quartz primer to treat the surface before applying liquid wallpaper. This primer increases the adhesion of the finishing material and makes it easier to distribute. Wallpaper adheres to a highly absorbent wall, so the painted surface needs to be roughened. To do this, use primer paint with quartz sand. It is better to carry out processing with a wide brush rather than a roller.
If the wall is covered oil paint or another glossy layer, which means it is as smooth as possible. Sandpaper will help make it rough for better grip.
Advice! The thickness of the applied layer must be adjusted; for this, the inclination of the spatula is used. The stronger the blade is pressed to the plane, the sharper the angle and thicker the layer. facing material and vice versa. At a higher angle, more mixture will be cut off.
On what surface can liquid wallpaper be applied:
Important! Color of walls painted different colors, needs to be equalized. Liquid wallpaper over white paint will be lighter and brighter, and on dark paint it will be duller and darker.
Liquid wallpaper cannot be applied to whitewash. It is not enough, as many believe, to cover such walls with a primer. Lime surfaces become heavily saturated with moisture and begin to crumble, yellow spots appear. Therefore, the coating is sanded completely down to the base material, then oil-phthalic paint or waterproof primer is applied to the wall.
Many people wonder whether it is possible to apply liquid wallpaper to plaster - not only is it possible, but this is the most suitable medium for intermolecular influence. Plaster is a mineral surface and the finishing material “sticks” to it very well. However, the coating also needs to be leveled with a special solution consisting of cement with sand, rotband and putty.
Depending on the composition of the plaster itself, it can absorb a lot of moisture, so it is first treated with 3-5 layers of primer to ensure that all pores are closed. The crumbling plaster must be removed to a solid base.
Concrete walls are puttied with a gypsum binder mixture before priming. Water-soluble primer covers them quite well.
Is it possible to apply liquid wallpaper to plywood? The answer will definitely be “no” if it is not processed in any way. Plywood is wood material, for which excess contact with moisture is extremely undesirable, and liquid wallpaper contains a lot of water. Otherwise, the finishing material will simply delaminate and peel off, and the wood will begin to swell. Therefore, applying it to an unprepared surface can result in peeling and a change in the structure of the plywood itself.
Laminated sheets are coated with primer paint with abrasive chips before applying liquid wallpaper. This will help to achieve, if not ideal adhesion to the surface, then very high quality. Alkyd enamel is applied to non-laminated boards, followed by a primer layer.
Interesting! According to some experts, plywood in direct contact with liquid wallpaper will greatly decrease in area. On the wallpaper side, the sheet bends inward.
The easiest way to verify all of this is to conduct an experiment on a thin sheet of plywood and see what happens to it and what the finish itself looks like.
Liquid wallpaper can be applied to almost any surface, including deformable ones (chipboard, gypsum board, plywood, fiberboard), but not to peeling paint, lime, greasy or oil stains. Defective areas are treated using scrapers and special removers for paint and varnish materials. The main requirement for the surface is the interchangeability of the product, that is, good adhesion, and for this you will need to compare the main components.
The video shows how to prepare walls before applying liquid wallpaper:
Liquid wallpaper covers small unevenness well. They will fit perfectly on carefully rubbed plaster. The plane being processed must be free of waves; allowed small cracks and scratches. In rooms with high humidity work with this finishing material not very comfortable. The temperature in the room should not exceed +40°C.
