Stairs.  Entry group.  Materials.  Doors.  Locks.  Design

Stairs. Entry group. Materials. Doors. Locks. Design

» What is the maximum length of wallpaper that can be glued. How to glue meter-long wallpaper - master the simple principles of work. Characteristics and preparation for do-it-yourself gluing

What is the maximum length of wallpaper that can be glued. How to glue meter-long wallpaper - master the simple principles of work. Characteristics and preparation for do-it-yourself gluing

IN Lately On the shelves of construction hypermarkets and on the virtual windows of specialized online stores, you can increasingly see wide ranges of meter wallpaper. They are different from rolls standard sizes almost 2 times, having a width of 1 meter, or more precisely - 106 cm.

What are their main advantages when compared with their usual analogues and how to choose them correctly? And most importantly, how to properly glue wide wallpaper? After all, over the years, many of us have become accustomed to gluing standard rolls half a meter wide. So let's move on to look at these interesting questions.

Detailed instructions: how to glue meter-long non-woven wallpaper

The process of gluing meter-wide non-woven wallpaper includes several main stages. Let's look at each of them in more detail and find out how to glue meter-long wallpaper:

  • Preliminary preparation of the wall. We remove the old wallpaper and remove any remaining unevenness in the form of paper and other residues. The advantage is the fact that wallpaper with a non-woven base is not afraid of minor surface irregularities, chips and scratches on the walls and partitions of the room. In addition, if the prepared working surface is slightly rough, this will be rather a plus before starting work.
  • Then you need to close all windows, vents and other sources of drafts. It is recommended to close even technical ventilation openings. Moreover, opening vents and windows is allowed only after the glue has completely dried, which can take from 24 to 72 hours. It is also recommended to turn off the power for a while, remove the sockets, remove them from the walls various elements fasteners: nails, screws, etc.
  • and wall surfaces. Be especially careful when purchasing adhesive as it must match the type of wallpaper. The process of preparing the solution itself is not complicated and even a non-professional can easily do it with their own hands. Pour water into a pre-prepared container and gradually add dry glue, while stirring with a small stick or other available means. Read the glue instructions: it says how long it will take for the solution to harden sufficiently and be ready to start work. As a rule, you will not have to wait more than 10-20 minutes. Once the glue is ready, you need to mark the wall. Considering that this is non-woven, and, moreover, meter-long wallpaper, it is necessary to take into account that they will need to be glued at the joint - this is exactly what will be correct. As reviews and expert advice say, it is better to start gluing from the window, moving deeper into the room. As for the first sheet, align it vertically with a plumb line, and draw a line with a regular pencil using a long meter ruler.
  • The next stage is cutting wallpaper for gluing. Leave 10 cm at the top and bottom as a margin. After completing the work and completely drying, you can remove excess (left in reserve) sections of wallpaper using a previously prepared sharp knife.
  • Let's start gluing. Having successfully completed all the previous instructions, you need to move on to the next stage of work - directly to gluing. Before applying the glue itself, you need to mix it again. After this, we proceed to applying the adhesive layer. This is done using a wide wallpaper paste brush. As you know, non-woven wallpaper is not coated with a layer of glue. It is enough just to apply it to the surface of the wall. After applying a layer of adhesive solution, carefully smooth the wallpaper. This stage must be performed efficiently and conscientiously, taking into account that you are gluing wide meter-long wallpaper. If necessary, straighten the wallpaper, level it and get rid of air bubbles using a special plastic spatula for leveling wallpaper. Smoothing can also be done using a plastic comb or roller, downwards and away from the middle of the wallpaper sheet. Remove excess glue with a small sponge or rag.
  • We continue gluing the remaining cut sheets. . If necessary, you need to accurately select the pattern so that it matches the adjacent sheet of wallpaper.

Advice from the experts! Since meter-long wallpaper is much wider than standard wallpaper, it is recommended that two people hang it together. Therefore, before starting work, find yourself an assistant - it will be much easier to work with him.

Pros and cons of gluing meter-wide wallpaper

Before gluing 1-meter wallpaper, it will be useful to learn about their advantages, as well as some disadvantages. The fact is that only after a detailed study of the pros and cons of gluing wide canvases, you will have a more or less accurate idea regarding the choice in favor of one or another option.

Advantages

The advantages certainly include the following points:

  • After the repair, fewer joints remain on the wall.
  • and execution of work. After all, even despite the fact that meter-long wallpaper has O The thicker thickness compared to standard analogues is still easier to measure and glue 15 sheets than 30.
  • You can save additional money, since the price of one tube of wide meter-long wallpaper, although slightly, is still lower than that of two tubes of standard-width wallpaper.

Disadvantages of wide canvases

Of course, one cannot fail to mention some disadvantages:

  1. Difficulties in fitting wide non-woven wallpaper to the adjacent, already pasted canvas, in contrast to traditional analogues.
  2. Difficulties with gluing alone. Unlike rolls of regular 53 cm width, working with wide rolls requires an assistant.
  3. Necessity better preparation surfaces of the walls before gluing, in order to better fit one sheet to another.

We hope that now you have more clarity on how to properly glue meter wide wallpaper. This coating, as we have seen, has a number of significant advantages. We wish you a successful renovation!

Before you hang meter-long wallpaper, you need to calculate its quantity (how many rolls will be needed per room). Therefore, first, determine the perimeter. For example, the width of the room is 6 meters and the length is 7. Then the perimeter is 26 m. The amount of wallpaper is calculated using the following formula: perimeter of the room: roll width: 9 or 10 (the first number if the image is adjusted).

Let us explain what 9 and 10 mean. The fact is that these wallpapers usually have a length of 25 meters. The average ceiling height is 2.50 m. Therefore, 10 canvases are obtained from one roll. Returning to our example, the number would be: 26:1:10 (without adjusting the pattern) = 2.6 rolls. Round up to 3. As you can see from the above, these wallpapers are also a very profitable option. If it suddenly turns out that the length of the roll is 10 m, then you need to divide by 3 and 4, respectively.

Advantages of meter wallpaper

As it turned out, meter-long wallpaper has some undeniable advantages before the usual ones. Firstly, we can say that sticking much more profitable in terms of time and finances. Three rolls of this wallpaper cost less than 6 rolls of regular wallpaper (0.53 m). And the process itself is much faster, and consumables are significantly saved.

Secondly, they look more attractive because there are fewer seams on the wall. This generally affects the perception of space. In addition, there is less need to join the drawing. This way, random irregularities when combining images will not be so noticeable. Thirdly, most often non-woven wallpaper is 1 meter wide, which is also distinguished by its durability.

How to glue meter-long wallpaper correctly?

The question often arises - how to paste meter-long wallpaper? On initial stage you need to prepare the base. To do this, the old coating is removed from it, be it plaster, paint, etc. Then the walls are leveled. In this case, switches and sockets are closed with a special masking tape. Next, everything is prepared related tools: tape measure, pencil, water level, plastic spatula, glue bucket, polyethylene, knife.

After this, the gluing of meter-long wallpaper begins. Mark the room from the corner. Apply wallpaper and mark vertical lines with a level and pencil. In this case, it is important to make markings taking into account the fact that the canvases will be glued using the overlapping method. Next, spread the film on the floor or table. This is necessary so that the front side of the canvas does not get dirty. The glue is prepared in accordance with the instructions (written on the package).

Attention! The selection of glue should be made depending on what wallpaper it will be applied to. For paper, non-woven, bamboo and fabric, certain adhesive mixtures are needed.

Then the question may arise - how to stick meter-long wallpaper on the walls? The principle is the same as with regular ones. The canvas is cut to a length equal to the height of the ceilings, plus 10 centimeters. They put them down front side down onto the polyethylene and apply glue to the underside. Make a fold in the center and fold the canvas in half so that it is properly saturated with glue.

Apply the same composition to the wall with a roller. At the final stage, attach the canvases themselves and smooth them with your hands or a dry cloth (to avoid bubbles). In order not to get confused with how to glue meter-long wallpaper, a video describing which is presented on our website, just follow the instructions, and then the process will be successful!

Carrying out self-repair and finishing an apartment is fraught not only with the complexity of the work, but also with the lack of certain skills on the part of the performer. Many owners are interested in how to glue meter-long wallpaper so that the pattern fits correctly and there are no visible joints left on the wall. The process of gluing wide wallpaper needs to be considered in more detail.

How to hang wallpaper alone (click to enlarge)

What types of wide wallpaper rolls are there?

Pasting any type of wallpaper is always an entertaining and responsible activity. Professionals glue products alone, but in the case of wide canvases you may encounter difficulties. To solve the problem and glue meter-long wallpaper, one needs to find out the nuances of preparing the walls, choosing materials and appropriate tools.

The proposed options themselves can be of two types:

  • vinyl on non-woven fabric;
  • non-woven for painting.

Non-woven fabric is a thin non-woven base that is stronger than paper wallpaper. The advantage of non-woven products is their reliable gluing to the wall. In the future, gluing wide wallpaper on non-woven fabric without properly preparing the walls will lead to problems arising at the stage of changing the finish.

Non-woven wallpaper is designed for further painting, while another type - vinyl, is produced with a pattern using polyvinyl chloride. Images can be textured and perfectly hide uneven walls. High quality wide vinyl wallpapers very dense and when smoothing the canvas you can be sure that they will not be erased, which cannot be said about ordinary paper analogues.

You can select wallpaper from the table (click to enlarge)

Domestic and foreign manufacturers produce wallpaper 100 cm wide in order to make gluing the surface of walls indoors faster.

The importance of wall preparation: working with drywall

Before gluing wide wallpaper, it is necessary to thoroughly prepare the walls. All surfaces can be divided according to the base material:

In the case of gypsum board, if we're talking about about the construction of new cardboard walls, it is important to carry out the preparatory work once and in the future, during repeated repairs, the owner will only need to remove the old wallpaper in order to stick a new one. Before gluing wide wallpaper onto drywall, first putty it with starting putty, then finishing mixture. It is necessary to wait until the first layer dries, and then apply the second. First, the drywall seams are glued with sickle tape, and all protruding screw heads and gaps are carefully covered.

The final stage of working with drywall is cleaning the surface using sandpaper fine dispersion. After this, non-woven wallpaper is glued in compliance with all the rules.

Watch the video to understand better:

Wall with concrete base: how to prepare

If the base is a concrete wall that was previously covered or painted, you must perform the following steps:

  • completely remove old wallpaper or paint. If on at this stage difficulties arise, you can use special chemical compounds, allowing you to quickly and effectively remove old paint and putty;
  • the next stage contains the main rule: seal all visible holes on the surface, as well as solve the problem with wall defects. This can be achieved using a good putty mixture;
  • The third phase of the work will be covering the entire wall with putty, and it is not necessary to achieve a perfectly flat plane: when gluing high-quality meter-long wallpaper, all irregularities will be hidden under the structure of the pattern. After the putty has completely dried, lightly sand the walls;
  • The final step will be to treat the wall with a primer deep penetration. Thanks to this substance, the wallpaper will not absorb much glue, but will dry out gradually. Using a wide brush, apply primer to all walls and wait until dry. Next, you can begin to resolve the issue of how to properly glue meter-long wallpaper.

Some craftsmen, when working with unprepared walls, use an additional color scheme that matches the color of the wallpaper. They add it to the primer and go over it with a second coat to give the walls a background before gluing.

Find out more from the video:

Meter-long wallpaper on non-woven fabric - how to glue

In order for the glued products to stick firmly to the wall, it is necessary to follow a certain technology when working. To get started, prepare your tools:

  • roulette;
  • construction knife or scissors;
  • a bucket for diluting glue;
  • container for pouring and convenient use of glue;
  • wallpaper adhesive composition;
  • wide brush;
  • plastic spatula;
  • simple pencil.

Use special tools for wide wallpapers (click to enlarge)

Before gluing wide wallpaper correctly, you need to mark a cut on the wall in order to know where to apply the canvas. We take a tape measure and measure from the beginning of the wall exactly as much as the width of the wallpaper. We carry out with a simple pencil line from ceiling to floor. There is no need to mark the entire wall at once; it is optimal to make marks immediately before gluing the wallpaper.

The next step will be diluting the adhesive: pay attention to the manufacturer's instructions on the ratio of water and powder - the main thing here is to maintain the proportions and not make the glue too liquid or thick. As a rule, after dilution, the manufacturer recommends letting the solution sit for 5 minutes and then start working.

By watching the video you will learn even more:

Pour the finished mixture from the bucket into a flat container for convenience. Before you begin, cut the fabric from the roll. The length of the canvas should be 10 cm greater than the height of the wall. Lay the wallpaper on the floor and use a utility knife to make a cut.

Important: if gluing occurs on a floor where there is already finishing, use plastic film to prevent glue from getting on the floor.

Using a wide brush, apply glue to the section of wall that was previously marked with a pencil. It is advisable to do this quickly to prevent the glue from drying out. Many experts also recommend applying glue to the non-woven base for better adhesion.

We apply a piece of canvas to the wall coated with glue. This is done in this order:

  • bring the canvas to the ceiling itself and carefully apply it, pressing;
  • Gradually press the entire surface of the cut against the wall with your hands;
  • when the cut stays on the wall on its own, take a plastic spatula and start removing bubbles and wrinkles;
  • It is possible for one person to glue meter-long wallpaper, but it will be difficult, so involve your household in the action: have an assistant hold the canvas from below, lifting it slightly to expel the air. Another person smoothes the cut from the center to the edges, carefully straightening it.

Having dealt with the first glued sheet, move on to the next one, following the steps in the same order.

In addition to the main process of pasting walls, there is also a list of nuances and useful tips, which you need to listen to to achieve a positive result:

  • avoid drafts in the room and try to ensure optimal temperature regime during work;
  • if the procedure is carried out in winter time, make sure to glue the cuts in these areas before the radiator starts to heat up;
  • Most adhesives are universal, but if you are interested in the question of how to glue meter-long non-woven wallpaper correctly, then it is best to choose a special glue for such a base;

Useful advice for gluing in the kitchen:

Important: It would be appropriate to use stepladders or stools in order to more accurately apply the canvases to the wall.

  • If you make a mistake in the case of uneven placement of the cut on the surface, the situation can be corrected within 10 minutes, while the glue has not yet set. To do this, you need to use a spatula on the glued canvases, slowly straightening the wallpaper along the wall, avoiding tears and abrasion;
  • To glue meter-long wallpaper end-to-end, place the next cut overlapping the previous one. After pressing, run the knife along the seam, retreating the number of centimeters that was covered by the new cut. This way, the extra strip of wallpaper will be removed, and the canvases themselves will not have a visible seam.

The main advantage in deciding how to glue wide wallpaper is the fast pasting of the surface, compared to standard products. To finish a space 10 m long, you need to cut and glue a meter roll of canvas the same number of times. In case of paper wallpaper narrow width, the time and effort expended increase by one and a half times.

Show your imagination when decorating the walls and involve all family members in the process - the result will please everyone, and the process will unite the family and speed up the work.

Non-woven wallpaper - element decorative finishing walls and ceilings, which is heard by everyone and has a wide practical use. Often, this category includes both pure non-woven wallpaper and wallpaper with vinyl coating, which is applied to a non-woven base. This is no coincidence, because the base is the most important working element of the decoration. The correct order of work and the category of accompanying materials depend on its component.

Characteristics and preparation for do-it-yourself gluing

Non-woven wallpaper is a non-woven material consisting of more than two-thirds from cellulose fibers with the addition of synthetic binder fillers. Characterized by a low degree of hygroscopicity and higher strength than wallpaper on paper based. Consist of several layers. The working part of the wallpaper has a smooth surface. The front side is made with various embossing and can have a foam structure.

The width of non-woven wallpaper, in the most popular versions, is 0.5 and 1 meter. But there is an intermediate option - 0.7 meters. In fact, these numbers are not entirely accurate. Every size range has a small allowance. For meter-long non-woven wallpaper it is seven centimeters. A standard 10-meter roll usually has a slight excess in length.

Non-woven wallpaper is divided into two types:

  • for painting;
  • with complete coverage.

By front surface Non-woven wallpaper has a textured pattern to be painted. The canvas itself has a white or slightly yellowish color. In other cases, the color, pattern and composition of the coating can be very diverse.

The main factor when choosing wallpaper width, are the spatial characteristics of the room, such as: the surface area of ​​the walls on which the wallpaper is supposed to be glued; the presence of volumetric projections, niches, door and window openings.

But since general principle Since the gluing is the same for canvases of any width, you can consider the option of meter-long wallpaper.

How to glue non-woven meter wallpaper

Wallpapering begins with preparing the wall surface.

With order preparatory work And verbal recommendations, can be found in the video presented here.

Calculation of the required amount of wallpaper for pasting

In order to optimize your purchase as much as possible, you need to measure the length and height of the walls, in the area of ​​which there are no door or window openings. At standard height For a room not exceeding 2.5 meters, one roll of non-woven wallpaper is enough for four meters of the perimeter of the room, provided that the design or pattern on the front side does not require combining adjacent canvases. Selecting a pattern reduces the yield of full-length cuts. One roll produces three whole sheets. The remaining parts will be useful for pasting wall sections partially occupied by window and door niches.

When purchasing wallpaper glue, you should make sure that it matches the selected type of material. Non-woven base much heavier than paper, and when gluing wallpaper with your own hands, it would be wrong to rely on universal adhesive mixtures, recommended by the manufacturer for all types. It is worth making sure that the annotation contains a specification: for non-woven wallpaper.

General principles and features of work

There are “canonical” recommendations on how to hang non-woven wallpaper on a wall, based on the ideal data of the decorative material and perfect parameters of the room in which the work is carried out. But for gluing non-woven wallpaper with your own hands, professional experience will also come in handy. There are no contradictions between them, only small amendments taking into account local characteristics.

For example: it is not a fact that the distance from floor to ceiling, along the entire perimeter of the room, will be a constant value. Therefore, first of all, you should measure the height of the room at all corner joints of the walls. The larger indicator is taken as the main one. And pasting the walls should begin closer to this place, from the ceiling. This point is especially important if you are going to hang non-woven wallpaper with a matching pattern. The video shows one of the gluing methods, from a whole roll. This method is quite relevant, but not always convenient.

It is easier to operate with a pre-prepared cut. Required quantity whole cloth, cut to size maximum height. The selection of a cut with a rolling pattern is carried out by correct alignment of two cuts. The cut sheets, laid with the working side up, are placed in a common stack on the floor surface. Depending on the coating, the floor is cleaned or covered with plastic film.

It is believed that to glue non-woven wallpaper, it is enough to apply glue only to the wall. But for those who are trying to do this work for the first time and with their own hands, it will not be superfluous to treat the working side of the canvas with glue. This will give the performer additional time (the glue tends to dry and be absorbed into the surface) and will make it easier to move individual sections of wallpaper along the wall plane in the process of aligning the joints.

Question about preliminary or subsequent installation of fillets, must be decided directly on site. There are a number of reasons why it is more productive to install ceiling fillets after wallpapering.

Non-woven wallpaper - how to glue?

Aesthetics of the general background wallpaper, which are glued end-to-end, do not depend on the direction of the light flux, so it is not at all necessary to start gluing from the window. The starting line can be slopes doorways or a vertical mark of the edge border, made by hand, using building level or plumb line. If you plan to start gluing meter-long non-woven wallpaper from the corner, then you should make a three to four centimeter overlap on the adjacent wall. The overlap is overlapped with another canvas, after which, stationery knife A vertical penetrating incision is made in both sheets, the excess is removed, and the joint is carefully placed along the cut line.

Gluing non-woven wallpaper from the ceiling is all the easier since all non-woven materials do not curl and practically do not wrinkle. Holding the panel by the upper edge, you should align it along the previously marked line (first cut) or bring it to the edge of the previously glued one. Having correctly placed and pre-smoothed the upper third of the wallpaper sheet, you need straighten the rest and lower it freely, aligning it with the edge of the previous one. After ironing the resulting joint, use a rubber roller to roll the canvas along its entire length, from the middle to the edges. Excess adhesive that appears is removed immediately with a dry cotton cloth.

Wide wallpaper is a real wonder for a novice builder. Our compatriot is accustomed to using standard canvases for wallpapering rooms. But along with this, there are wallpapers that have a larger roll width, and the approach to work in this case changes radically. Although this material from regular wallpaper not much different, but significantly reduces the effort spent on repairs due to its increased width. From this article you will learn how to properly glue wide wallpaper, how to choose it wisely, mark the wall and paste the entire room.

What are the wide wallpapers?

Almost all Russian wallpaper products are currently produced according to a certain standard - most developers are familiar with wallpaper 53 centimeters wide. Foreign-made wallpapers are presented in a richer assortment, but at the same time they often have a non-standard width. For example, wallpaper from Italian and German manufacturers, whose products are quite widely represented on our market, have a working width of 106 or 70 centimeters.

And the special size wallpapers that are presented in model range Belgian companies make up a collection with roll widths of 90, 100 and even 140 centimeters. A number of models from the famous French manufacturer include wallpaper with a width of 90 and 70 centimeters. If after consideration various options wallpaper, you have chosen a wide size for yourself, then you just need to figure out the question of how to glue wide wallpaper.

Wide wallpapers have a non-woven base, so they do not require impregnation with glue. To achieve the desired result, you just need to smear the prepared wall with adhesive and place a dry cut sheet on it. However, you will have to first level the surface using finishing and starting putties. If you don’t take this “little thing” into account, you will definitely end up with mismatched seams.

However, you should not think that wide wallpapers are represented exclusively by non-woven fabrics. With the same success, the canvas can be paper, light, heavy and used with other glue in combination.

Advantages of wide wallpaper

But before choosing and pasting wallpaper, it is worth talking about the advantages of the size of wallpaper chosen by the consumer, which are especially attractive to ordinary consumers. The most obvious of these advantages is that the number of seams becomes noticeably smaller when working with wallpaper of this type.

It should be noted that wide wallpapers were specially designed to achieve the so-called “seamless” effect. The number of joints between pasted adjacent strips is reduced almost by half, which makes them invisible during repairs.

In addition, the use of wallpaper custom size significantly simplifies all procedures for gluing them. It is unlikely that any of us will doubt that cutting 5 pieces of wallpaper, treating them with glue and then gluing them to the wall is much easier than doing the same with 9 pieces of standard wallpaper. Of course, the effort and time spent on repairs in both of these cases are incomparable.

The cost of purchasing wallpaper material is also reduced, because with equal quality indicators, the cost of a wide roll is less than the price of two rolls of standard size wallpaper.

Disadvantages of wide wallpapers

There are no downsides to wide wallpapers, but there are some inconveniences when working with them. In this situation, it is recommended to very carefully prepare the surfaces for pasting. If the walls are poorly aligned, then high-quality pasting will be impossible. The fact is that defects and unevenness of the walls do not allow achieving ideal joining of adjacent strips of wallpaper.

Due to the large width, it may turn out that they will not be enough total length, and to cover the last couple of centimeters of the wall you will need to buy an additional roll. Due to the fact that the number of strips of wallpaper of this type is more difficult to adjust to the width of the wall than for standard wallpaper, a certain overconsumption of material is possible.

Another limitation that significantly affects the entire work process is that wide wallpaper is best glued by two people.

How to choose wide wallpaper

The peculiarity of wide wallpaper is that it looks a little different in a roll than after pasting it on the wall. Therefore, it is better to choose them in specialized stores, where there are samples displayed on the stand.

When looking at the rolls on display, you should start from the bottom of the stand, moving to the top, and then look at the middle samples. This should be done because the human psyche is designed in such a way as to protect a person from an overabundance of visual information. The gaze best captures what is in front of the eyes. Experienced sellers know this, and they place wallpaper that is not in great demand in the middle of the stand.

If you want to perform original design housing, buy all materials from one collection - borders, wallpaper, fabric for curtains. When choosing, give preference to wallpaper that has a quality certificate. Although rumors that vinyl wallpaper is not particularly environmentally friendly are completely unfounded, it is still worth asking about the quality.

Preparing the surface for pasting

The most difficult thing in working with wide wallpaper is preparing the working surface of the walls. Preparing the surface of the walls for wallpapering with a large width should begin when the finishing of the ceiling has not yet been completed. In this case, you must:

  • Remove the covers of sockets and switches, and then seal the holes with adhesive tape, which can be easily removed after work;
  • Remove all screws, nails, dowels and plugs from the walls;
  • Completely remove the old coating from the walls, making sure that even the slightest traces do not remain;
  • Inspect everything carefully again.

How to glue wide non-woven wallpaper if the walls are not very smooth? In this case, it is necessary to carefully level the surface with a dry mixture or cover the walls with plasterboard. The latter technique makes it possible to perform internal thermal insulation, and this is of great importance if mold has appeared on the walls - you cannot glue wallpaper on such walls until the fungus and the causes of its occurrence are completely removed.

Primer of walls for wide wallpaper

On smooth walls Before pasting, it is imperative to apply a primer, which will close the numerous microscopic pores. Its use will save the adhesive mixture, in addition, the glue will not be too absorbed into the wall, thereby ensuring the strength of the wallpaper. According to the rules, good adhesion of the base to the surface is recommended; this is precisely what is ensured by the primer, removing all dust from the walls.

By the way, if you spread glue on unprepared walls, some of it will be absorbed very quickly, and you won’t be able to complete the task properly. Before you begin gluing the wallpaper, the primer must dry completely.

If you use foam or other borders when finishing, you should note that they need to be installed on the wall before wallpapering. In the process of work, you will need a wide brush for applying glue, a special rubber roller, a long ruler, a pencil, a plumb line, scissors, a stationery or construction knife, as well as cotton rags.

Pasting wide wallpaper

When purchasing, it is recommended to check the compatibility of the selected adhesive and wallpaper. It is necessary to pay attention to the group of wallpaper, because according to the accepted classification, the material is divided into light, dense and heavy wallpaper. When working with standard wallpaper It is customary to apply glue only to the wall, but check the instructions to be sure.

How to glue wide vinyl wallpaper so that the joints are less noticeable? Work must be started from the window and carried out in the direction of the incident light. When joining panels, it is imperative to maintain the design and pattern. It may take more than one roll of wallpaper, but the result is worth it - the wallpaper will look like a solid canvas on the wall.

In principle, the method of covering walls with wide wallpaper is no different from the method of working with standard wallpaper. Just like regular wallpaper, wide wallpaper should be glued starting from the middle and from the top. If some irregularities do appear, then you just need to make a small cut on the edge of the wide wallpaper and overlap the edges of the cut on the wall.

When gluing meter sheets, it is convenient to use two stepladders, because with such an organization of work, good alignment of the strips along the surface of the walls is ensured. In addition, no additional movements of the partners who glue the sheet are required.

How to glue wide wallpaper: step-by-step instructions

  1. First, you should measure the length of the wall and calculate the number of whole strips that fit on it.
  2. It is imperative to mark the first canvas, starting from the window and moving deeper into the room. At a distance of 105 centimeters from the corner, you need to draw a vertical line to the floor using a plumb line, pencil and ruler. In case the vertical angle does not match, leave one or two centimeters.
  3. An important point is wallpapering in the corners, so attach special importance to this procedure. It is better to leave an overlap at the corner, which will later be covered by a panel on the opposite wall, but will not create an unsightly gap.
  4. After this, you should cut the required number of whole strips for one wall with a small allowance in length. Coat the wall well with glue to the width of the panel, going beyond the marked line.
  5. Start pasting together with an assistant. One person should hold the top edge, climb onto a stepladder and place the cut close to the ceiling line, a previously drawn horizontal line or border and to the marked vertical, the coincidence of which is adjusted by an assistant.
  6. Smooth the material to the wall, displacing any air bubbles that have arisen, moving from the middle to the edges. Remember that you should not try to stretch the wallpaper horizontally, because after drying it will create a gap and the wallpaper will return to its original position.
  7. The following canvases must be placed close to the previous ones, without gaps or overlap.
  8. As a rule, it is not possible to get the exact number of whole strips on one wall, and the last of them has to be cut off vertically. The panel on the next wall should be applied exactly from the corner, blocking it. Exposed glue at the joints is wiped off with a clean rag.
  9. Excess wallpaper can be trimmed only after the canvas has dried, since otherwise the sheet may shrink in the corners, uneven gaps will appear near the floor and near the ceiling, which cannot be masked.

Taping inconvenient places

When using non-standard wallpaper, pasting becomes much more complicated difficult places in the room: corners, behind the radiator and areas above the openings. But it is easier to glue the ceiling with wide wallpaper, since two people still take part in this process, and the number of sheets will be significantly reduced compared to standard wallpaper.

To paste wide wallpaper behind the radiator, you will have to cut the roll into small pieces. The best option- cut several pieces from one canvas, which is intended for pasting a flat part; fortunately, the width allows this.

When pasting an inconvenient place, difficulties arise that are associated with matching the pattern. If you can still guess the dimensions, then it is quite problematic to achieve a matching pattern. This procedure requires some design skills and experience and may not work the first time.

It is best to purchase non-woven wallpaper, because you can move it on the wall within ten minutes after sticking it on. However, under no circumstances should you take adhesive compositions, which contain additives for faster drying. This glue is intended exclusively for experienced workers.

How to glue non-standard wallpaper alone

Contrary to popular belief that only two people need to glue wide wallpaper, this job is quite feasible for one person. After all, the average width of the material is 106 centimeters, and the span of a person’s arms reaches at least 150 centimeters. That is, you can easily join the seams and perform alignment.

If you don’t manage to do everything smoothly the first time, don’t despair. You can always remove the canvas, coat the wall with glue again and repeat the process again, taking into account the mistakes made and watching how to glue wide wallpaper in the video. And, of course, remember that everything must take place in indoors, where drafts are excluded. Doors and windows can only be opened every other day.

Finally, I would like to present to your attention a few simple but useful tips that can be useful when pasting rooms. non-standard wallpaper. You should prepare in advance the entire necessary arsenal of tools that will be needed to complete the gluing work. This way you can avoid wasting time during work and save money. If necessary, you can use leveling aluminum corners, which are carefully puttied.

But it’s not enough to know the technique for sticking wide wallpaper; you also need to understand how to stick wallpaper in an original way in order to get the result spectacular interior. For these purposes, several types of wallpaper are usually used simultaneously. different shade and textures to add variety to the design of the room. Even novice designers should know that combining wallpaper can hide the shortcomings of a room's layout and highlight its advantageous aspects.

For example, horizontal alternation can visually reduce the height of the room, while vertical alternation can expand narrow passages. Methodology " accent wall» helps highlight the main piece of furniture. Wallpaper inserts are an independent decoration of the interior.

Thus, subject to the rules and recommendations described above, wide wallpaper will advantageously decorate your room, and as a result you will get an incredible seamless coating effect. If desired, meter-long wallpaper can be of any color and any texture, from the most different materials. When choosing a roll, be sure to pay attention to the recommendations regarding application and characteristics of the canvas.