Sewage pumping station Grundfos installation(Grundfoss) SOLOLIFT2 C-3 Several years ago, the world leader in the production of pumping equipment, Grundfos, released an updated version of the popular sewage installation SOLOLIFT 2 C3 / This installation is a compact device (including all the necessary pipes and connections for successful installation), highly efficient and is a hermetically sealed plastic unit , relatively small in size, which contains a pump with a “dry design” motor, which has a built-in check valve in the discharge pipe, as well as a level switch, a special built-in ventilation valve with carbon filter of improved quality, which allows you to effectively drain all sewage in your kitchen, bathroom (excluding the toilet) and other similar premises.
Pump type: | |Sewage installation| |
Pump type: | Surface |
Height: | 34.1 cm |
Width: | 15.8 cm |
Length: | 49.3 cm |
Weight: | 6.6 kg |
Operating mode: | 50% - 1 min. (30 sec. on; 30 sec. off) |
Protection class: | IP 44 |
Mains voltage: | 1 x 230 V |
Maximum power consumption: | 0.64 kW |
Water quality: | Dirty |
Permissible temperature of the pumped liquid: | up to 75°C |
Contents of delivery Grundfos (Grundfos) SOLOLIFT2 C-3: | Adapters with the same outer diameter and different inner diameters corresponding to the size of the pressure pipe. The pressure pipe, adapter, and pipeline are connected with a clamp. The eccentric inlet pipes allow the connection to be shifted by 10 mm, which facilitates the installation of the sewer installation. |
Maximum flow: | 204 l/min cubic m/hour |
Maximum pressure: | 8.8 m |
Insulation class: | F |
Rated current: | 3.1 A |
On/off level (from the bottom of the tank): | 65(115)/35 mm |
Application: | Sink, shower cabin, bidet, bathtub, washing machine/dishwasher/kitchen sink |
Advantages: | Operational reliability, easy care and maintenance, easy installation and replacement |
Manufacturer country: | Serbia |
Service within 24 hours: | Yes |
Guarantee: | 24 months |
Grundfos SOLOLIFT2 (Sololift 2) this is a unique series of compact sewer pumping units from the world leader in the production of pumping equipment that facilitates the drainage of wastewater from any household plumbing regardless of the gravity drainage system. Price on sewerage pumping units fully reflects their great functionality and high quality. The service life is designed for more than 10 years (as for all the company’s equipment Grundfos) ,warranty period 24 months. Buy a pumping unit Sololift2 (sololift2) You can in our company, the entire range of products is always available for you, as well as highly qualified specialists at your service who will help you select the equipment you need.
The units collect and pump wastewater through a thin discharge pipe (>23mm) to the next overflow pipe - up to a height of 6 m or a distance of up to 100 m.
An additional toilet and full bathroom in the attic or basement will no longer be just a dream thanks to the SOLOLIFT2 WC 1 or WC 3, as well as the sololift 2 CWC 3.
The series consists of 5 compact variants pumping units for disposal of domestic wastewater.
3 installations sololift , And designed for pumping wastewater from toilets, sinks, bidets, showers, washing machines and other plumbing fixtures.
2 installations< Grundfos Sololift 2 C-3 > and Grundfos Sololift 2 D-2designed to pump out wastewater from multiple sources (washing machine, dishwasher and sink).
Number in symbols models means the possible number of additional inlet pipes (for example model Sololift2 C-3 has 3 inlets). SOLOLIFT2 (sololift 2 ) are designed in accordance with the needs of professionals, and therefore provide high reliability, simplicity and cleanliness during service.
The units are ready for use with a plug and operate fully automatically when water is supplied to the pump drain tank.You can learn more about the operation of Grunfos Sololift2 pumping units
Application
The pump is used in cases where drainage from plumbing equipment is necessary, but it is not possible or it is impossible to use gravity drainage pipe. Installations with connection to a bathroom are intended only for installation in private houses or apartments. Other installations can also be used for commercial purposes.
WC-1, and are designed for pumping wastewater from 1 toilet, 1 washbasin, 1 shower or 1 bidet.
CWC-3 This is an optional flexible option designed to be integrated into a front wall installation.
C-3 and designed to remove (hot) wastewater from bath, shower, washbasin, sink, washing machine and dishwasher.
Compact dimensions allow them to be integrated into the front wall kitchen set or bathroom, and into floor structural elements.
Explanation of the model name.
Explanation of the designation of SOLOLIFT2 installations:
WC - model has a connection to the toilet and is equipped with a cutting mechanism
C - model with compact design
D - model for shower and sink
1 - one additional connection (not counting the toilet connection)
2 - two additional connections
3 - three additional connections
Attention! Units of models C-3 and D-2 are not equipped with a cutting mechanism.
The compact sewage pumping unit is equipped with:
Installation design in accordance with EN12050-2 standard, with unique properties, quick installation, long service life and easy cleaning.
Internal structure Sololift 2S3 installations
Examples of installation of the Grundfos Sololift 2 C3 installation
Overall dimensions of the pump GRUNDFOS SOLOLIFT 2 C-3
net weight 6.6 kg Tank capacity 5.7 l Flexible pressure pipe ∅22/25/28/32/36/40 Possible entrance dimensions 1 x ∅32/36/40, Start and stop levels Start: 72 mm above floor level. Stop: 52 mm above floor level pH value of the pumped liquid from 4 to 10 Temperature environment from +5 °C to +35 °C Rated current 3.1 A Rotation speed 2800 min-1 Insulation class F Supply voltage 1x220-240 V, 5-Hz. |
|
Sometimes there are situations when a pump with a Grundfos Sololift grinder is simply necessary. Some of the most common ones include:
In these two typical situations (although there may be many more), it is difficult to think of a more suitable solution than a pumping unit with a Sololift toilet grinder. Today on the plumbing market you can find many similar products, but none of them can compete with them in terms of functionality, reliability and technical characteristics. It is possible that the price of plumbing equipment from other companies with much worse performance may not be competitive.
In any case, domestic buyers have already appreciated the fecal pump for the toilet from the manufacturer Grundfos.
The drainage pump from Grundfos is a truly unique plumbing design. If you decide to buy this product, then before doing this, it is highly advisable to familiarize yourself with the entire model range (Sololift 2 WC 1, Sololift 2WC-3b Sololift2 CWC3) study specifications and features. This knowledge will help you choose best option at a price, and the most suitable for certain operating conditions.
Toilet pump. It should be borne in mind that this device requires installation (in addition to the toilet) on a maximum of 3 sanitary units: shower, washbasin and urinal (or bidet). The pumps in this series are practically no different from Sololift2 WC 1 (toilet connection + another source).
The main purpose of all the plumbing devices listed above is to transport waste water from the plumbing unit to the sewer. GrundfosSololift pumps are compact in size and operate fully automatically. A chopper knife is located inside the pumps. All stations are capable of effectively removing fecal wastewater from to varying degrees intensity (medium and low). One of the conditions for normal operation of Grundfos Sololift equipment is the temperature of the fluid passed through - no more than 50C. The devices are not intended for pumping liquids with large mechanical fragments and chemically aggressive solutions.
Also very popular among consumers all over the world is the Grundfos Sololift 2 C3 installation, which is designed for installation in the kitchen, laundry room and other places where you may have a sink, washing machine and dishwasher. Due to its high technical characteristics, namely power and the ability to pump water with temperatures up to 90 degrees Celsius, it is indispensable when pumping used water into the sewer.
In order not to waste money in vain (the price of Grundfos pumps cannot be called cheap), you need to decide on the most suitable one for a given specific situation model. And only then buy it. You should also adhere to the following operating requirements:
You can install the grinder pump yourself, but it is still better to call an experienced specialist.
This is a small-sized, fully equipped and ready-to-install pumping unit that consists of a hermetically sealed plastic tank in which are located - a pump with a “dry version” motor with a check valve in the discharge pipe, a level switch, ventilation valve with improved quality carbon filter (no additional filters required), electrical cable 1.2 m long with Shuko plug. The pump automatically turns on when the tank is full (switch-on level) and automatically turns off when it is empty (switch-off level).
Vertical pumping is 8.8 m, horizontal - 90 m
The design allows pumping wastewater at temperatures up to 75 °C during continuous operation and up to 90 °C within 30 minutes.
Sololift2 C-3- a small-sized, fully equipped and ready-to-install sewage pumping unit for pumping household wastewater (without feces) from those premises in private houses from which wastewater cannot be directed into the sewer by gravity.
Sololift2 C-3 is typically used for:
in the floor basements below sewer level, or in connection with the renovation or modernization of existing buildings, where their location may be remote from the main sewer riser and it is not enough to establish a natural slope.
Sololift2 C-3 suitable for installation under a washbasin, or particularly suitable for installation in limited space in structures near walls and built-in cabinets. Low on/off levels are suitable even when used with a shower tray.
The compact sewage pumping unit is equipped with:
Installation design in accordance with EN12050-2 standard, with unique properties, quick installation, long service life and easy cleaning.
Application: Sink, shower cabin, bidet, bathtub,washing machine, dishwasher, kitchen sink
Contents of delivery: Adapters with the same outer diameter and different inner diameters corresponding to the size of the pressure pipe. The pressure pipe, adapter, and pipeline are connected with a clamp. Eccentric inlet pipes allow the connection to be shifted by 10 mm, which facilitates the installation of the sewer installation.
Advantages: Operational reliability, easy care and maintenance, easy installation and replacement
REPLACING SOLOLIFT+ to SOLOLIFT2
We invite you to buy Grundfos SOLOLIFT2 C-3 at a bargain price of RUR 24,050.
Grundfos SOLOLIFT2 C-3 is different high quality And optimal price. The manufacturer is known all over the world and provides a guarantee for its products.
To buy Grundfos SOLOLIFT2 C-3 in our online store, you just need to place an order online on the website
Maximum performance | 11.1 cu. m/hour |
Power | 640 W |
Voltage | 220 V |
Availability of cutting mechanism | No |
Connectivity | washing machine, dishwasher, bath, sink, shower, bidet |
Type | Surface sewer installation |
Maximum pumped water temperature | from 75°C, for 30 minutes at 90°C |
Pipe diameter | 32 mm, 40 mm Ø |
Dimensions (DxDxV) | 373.3x158.3x255.3 mm |
Weight | 6.6 kg |
Guarantee | 2 years |
The universal compact sewerage installation is designed for transporting wastewater and connecting to a variety of plumbing fixtures. Among the entire series, the Sololift 2 C-3 model has the highest operating capabilities; the unit can be connected to:
Please note that this model is not equipped with a cutting mechanism; foreign objects into wastewater may cause equipment failure. The device is intended exclusively for the disposal of gray waste.
A simple operating principle and high-quality components are the key to many years of effective operation. The household pump is easy to maintain and does not require any additional upgrades; it goes on sale completely ready for installation.
The pumping unit is capable of pumping out liquid at temperatures from 75 to 90 C, depending on the duration of operation, the maximum time of uninterrupted operation is half an hour, this is quite enough to remove waste water.
The Danish company produces high-quality, reliable and functional pump equipment. The Sololift 2 line is very popular and has a huge number of positive feedback and fully meets modern requirements.
For the production of compact sewerage installations the manufacturer used the most suitable materials and reliable components. Innovative technologies and numerous studies have made it possible to produce a series of unique units that save on the organization of the sewer system and perform high-quality wastewater disposal.
High technical characteristics and high-quality materials ensure many years of service.
Installation of a household pump is very simple; you can make the connection yourself, following the manufacturer’s instructions included in the kit. The manual describes in detail each stage of installation and startup of the equipment.
The simple operating principle is based on automatic switching on and turning off the installation, as soon as the tank is completely filled, the injection mechanism discharges wastewater to the main sewerage pipeline. After the tank is emptied, the unit automatically turns off.
A unique household pump will help you realize all your wildest ideas related to rearranging the plumbing area, creating an additional bath for guests or moving the kitchen from one room to another.
The main task of such sewer stations is to transport wastewater into the main pipeline of the sewer system; the device will allow you to install a shower stall in the attic or organize a laundry room in the basement, install an additional toilet and sink.
Model Grundfos sololift 2 with 3 works with lightly contaminated waste water, it is strictly prohibited to use equipment for pumping chemicals and aggressive substances.
Simple and quick frontal installation is carried out using adapters and flexible hoses; all joints are treated with sealant.
Reliable Sololift 2 sewage pumps will create conditions and comfort anywhere.
Specifications | |||||
Possible connections | Toilet, urinal, washbasin, sink | Toilet, urinal, washbasin, sink, shower, bidet | Wall mounted toilet, urinal, washbasin, sink, shower, bidet | Shower, sink, bidet | Washbasin, dishwasher, washing machine, shower, bathtub, bidet, built-in sink |
Consumption | 620 W | 620 W | 620 W | 280 W | 640 W |
Voltage | 1x220-240 V-10%/+6%, 50 Hz | 1x220-240 V-10%/+6%, 50 Hz | 1x220-240 V-10%/+6%, 50 Hz | 1x220-240 V-10%/+6%, 50 Hz | 1x220-240 V-10%/+6%, 50 Hz |
Weight kg | 7.3 | 7.3 | 7.1 | 4.3 | 6.6 |
Temperature of the pumped liquid | Max. 50°C | Max. 50°C | Max. 50°C | 50°C | 75°С (no more than half an hour 90°С) |
Rated current | 3.0 A | 3.0 A | 3.0 A | 1.3 A | 3.1 A |
Flow l/min | Max. 149 | Max. 149 | Max. 137 | Max. 119 | Max. 204 |
Pressure | 8.5 m | 8.5 m | 8.5 m | 5.5 m | 8.5 m |
Power cable | 1.2 m, 0.75 mm² | 1.2 m, 0.75 mm² | 1.2 m, 0.75 mm² | 1.2 m, 0.75 mm² | 1.2 m, 0.75 mm² |
Duty cycle | S-3-50%-1 min | S-3-50%-1 min | S-3-50%-1 min | S-3-50%-1 min | S-3-50%-1 min |
Areas of use
Sololift2 C-3 is suitable for pumping greywater from washing machines, dishwashers, baths, showers, wash basins or kitchen sink. The unit is intended for front mounting in a wall. The professional design allows pumping wastewater with temperatures up to 75 °C, with continuous operation for 30 minutes up to 90 °C.
Typically these settings are used in the following cases:
Features and Benefits
Durability and operational reliability
Easy installation and replacement
Easy care and maintenance
Equipment design and configuration
Sololift2 C-3 comes with a tank made of composite material, resistant to waste water, which has an inspection cover.
Characteristics:
Technical data
Net weight | 6.6 kg |
Tank capacity | 5.7 l |
Flexible pressure pipe | Ø22/25/28/32/36/40 |
Possible entrance dimensions | 1 x Ø32/36/40, top connection 2 x Ø36/40/50 side |
Start and stop levels | Launch level 1: 65 mm above floor level Launch level 2: 115 mm above floor level Stop level: 35mm above floor level |
pH value of the pumped liquid | from 4 to 10 |
Maximum fluid temperature | 75 °C constant 90°C for 30 minutes |
Maximum head | 8.5 m |
Maximum flow | 204 l/m |
Ambient temperature | from +5 °C to +35 °C |
Operating mode | S3-50% - 1 min. (30 sec. on; 30 sec. off) |
Supply voltage | 1 x 220-240 V - 10%/+ 6%, 50 Hz |
Power consumption, P1 | Max. 640 W |
Rated current | 3.1 A |
Power factor (cos) | 0,66/0,90 |
Rotation frequency | 2800 min-1 |
Protection class | IP44 |
Insulation class | F |
Connection cable | 1.2 m, 0.75 mm2 (H05VV-F-3G) |
dimensions
Sololift2 units are CE marked and have the following certificates:
SOLOLIFT2 This is a unique series of compact sewer pumping units that facilitate the drainage of wastewater from any household plumbing fixtures, regardless of the gravity drainage system.
The units collect and pump wastewater through a thin discharge pipeline (>23mm) to the next overflow pipe - up to a height of 6 m or a distance of 100 m.
An additional toilet and full bathroom in the attic or basement will no longer be just a dream thanks to the use of SOLOLIFT2.
The series consists of 5 compact versions of pumping units for the disposal of domestic wastewater. 3 units WC-1, WC-3 and CWC-3 are designed for pumping wastewater from toilets and other plumbing fixtures. 2 units C-3 and D-2 are designed for pumping gray wastewater from several objects.
The number in the model symbols indicates the possible number of additional inlet pipes. SOLOLIFT2 is designed in accordance with the needs of professionals, and therefore provides high reliability, simplicity and cleanliness during service.
The units are ready for use with a plug and operate in fully automatic mode when water is supplied to the tank.
The pump is used in cases where drainage from plumbing equipment is required, but the use of a gravity drainage pipe is not available or impossible. Installations with connection to a bathroom are intended only for installation in private homes. Other installations can also be used for commercial purposes.
WC-1, WC-3 and CWC-3 are designed to pump wastewater from 1 toilet, 1 washbasin, 1 shower and 1 bidet.
The CWC-3 is an optional flexible option designed to be integrated into a front wall installation.
C-3 and D-2 are designed to remove (hot) wastewater from bathtubs, showers, washbasins and washing machines.
Their compact dimensions allow them to be integrated into the front wall and floor structural elements.