After purchasing a new TV, many people have difficulty keeping it compact and easy to watch. Since very often in the room for which this product was purchased Appliances, there is not enough space, it becomes relevant to mount the TV on the wall using special holders (brackets). Such brackets will allow you to securely mount this equipment on the wall, thereby saving room space. We will talk about what these fasteners are, what types they come in, and how to make them yourself in this article.
Read in the article
The advantages of wall mounting for a TV include:
The main disadvantages of TV wall mounts are:
In order to understand how to hang a TV on the wall using a special bracket, you need to decide on the location and height of its installation.
When choosing a place to mount this household appliance on the wall, factors such as:
The installation height of the TV is selected in such a way that the person watching it does not have to raise or lower his head; for this, the entire structure is mounted at eye level of the person sitting.
Important! If you are not confident in your abilities or do not know how to properly hang a recently purchased TV on the wall, then it is better to seek help from professional installers. For a small fee, they will securely mount the bracket on the wall and fix your expensive equipment on it.
When choosing a wall bracket for a TV, many are faced with many models of this device. Among this variety, the most popular wall mounts are the following types:
The swivel-and-slide-out bracket for mounting a TV on a wall consists of the following components:
Thanks to its design, this mount allows you not only to change the angle of the TV horizontally by 60-90°, vertically by 10-12°, but also, thanks to the hinged connection of the arms, to extend the TV to a great distance from the wall.
Unlike the previous type, the tilt-and-swivel TV bracket has more simple design, consisting of:
Such a mount will provide a change in the angle of rotation of the TV in the horizontal plane up to 90°, vertically up to 20°.
A bracket for mounting a TV on a corner-type wall is used if it is not possible to fix it in another place due to large quantity shelves and other furniture. This mount consists of the following parts:
Depending on the design of the lever, such a bracket can not only change the angle of inclination of the display vertically and horizontally, but can also move it to one of two walls joined in the corner.
Before purchasing a mount, you need to choose the model that is best suited for specific conditions - for this you need to know how to do it correctly. In order to choose a bracket for mounting your TV on the wall, you need to consider the following factors:
A comment
Consultant for the retail chain "M-Video"
Ask a Question“When choosing a TV mount (swivel, retractable, tilt-swivel, corner), purchase a model with characteristics higher than you need. This will allow you in the future, when replacing one model with a newer one, not to purchase an additional new bracket.
"If it is not possible to purchase this device, then you should figure out how to quickly and cost-effectively hang a TV on the wall without using a bracket. You can do this in the following ways.
For this you will need square pipe 20x20 mm and 15x15mm, two M8 bolts, 4 M8 nuts. The manufacturing process of such a device is as follows.
Photo | Description of work |
| Cut the pipes to size:
|
![]() | We drill holes in the pipes:
|
![]() | Three holes of different diameters on each profile with a cross-section of 20×20 mm are combined into one using pliers and a drill. |
![]() | All holes for removing burrs are processed with a round file; holes with a diameter of 8 mm are additionally drilled to a shallow depth with a drill with a diameter of 10 mm. The workpieces are thoroughly cleaned on all sides with sandpaper. |
![]() | Two parallel edges of the M8 nut are ground with sandpaper so that it fits tightly inside the profile with a cross-section of 20x20 mm. |
![]() | The workpieces are degreased and painted black powder paint on metal. |
![]() | We insert a turned nut inside the 15×15 mm profile and place it opposite the hole located between the outermost ones. We screw a lock nut onto the bolt, insert it into the hole indicated above and screw it into the nut located inside the profile. To finally fix the bolt, tighten it with the upper lock nut. |
![]() | We fasten the 15x15 mm profiles using bolts to the mounting holes on the back wall of the TV. |
![]() | Two profiles with a cross section of 20x20 mm are attached to the wall at the same distance as thinner profiles attached to the back wall of the TV. |
![]() | The TV is mounted on the wall - the bolt heads are inserted into the corresponding holes on the profiles fixed to the wall, after which the fastener is slightly lowered under the weight of the device and securely fixes it to the wall. |
You will need two aluminum corners 30x30 mm, 4 M8 bolts, 2 M8 nuts, 4 M8 washers.
Photo | Description of work |
![]() | On one of the shelves of the corner we make two holes with a distance equal to the same between two mounting holes located in a horizontal plane on the back wall of the TV. On the second we make holes with a slightly larger distance. |
![]() | The second corner is 10-15 cm long more than the first. On one of its shelves, two pear-shaped holes (hangers) are made - for this, a hole is first made with a large and then a smaller diameter drill. On the second shelf, holes are made with the same distance as on a similar one at the first corner. |
![]() | The corners are folded together with shelves with matching holes and connected with bolts. |
![]() | The resulting structure is screwed to the back wall of the TV using bolts. |
![]() | On the wall, at a distance equal to the same distance, we make two holes between the hangers, drive dowels into them and screw them in. |
![]() | By inserting the screw heads into the hangers, we mount the TV on the wall. |
In addition to purchased models, you can also make a wall mount for your TV yourself.
A reliable and simple holder for an LCD TV can be made from a simple furniture tire using the following technology.
Photo | Description of work |
![]() | We drill two holes in the wall, insert dowels into them and screw in rectangular hooks (crutches). |
![]() | A rail with pre-drilled mounting holes at a certain distance is screwed to the back wall of the TV using bolts. |
![]() | To ensure that the back cover does not touch the wallpaper, bolts are screwed into the lower mounting holes, the heads of which are closed with plastic plugs. |
![]() | To prevent the bolt heads and plugs from damaging the wallpaper, we cover them with special paper stickers. |
![]() | The TV is hung on hooks and connected to the power grid, the Internet, or cable television. |
A fairly simple to manufacture and reliable mount for an LCD TV can be made with your own hands from wooden plank according to the following instructions.
Photo | Description of work |
![]() | We fold and clamp in a vice two boards 400-450 mm long, 25-30 mm thick so that the long edge of one of them protrudes 5-10 mm. |
![]() | Using a plane, we cut down the “step” to an inclined, flat plane, and process the resulting planes with sandpaper. |
![]() | We fasten one of the boards with bolts to the back wall of the TV so that the long side with the sawn plane faces down. |
![]() | We attach the second board to the wall with the beveled plane up. |
![]() | We mount the TV on the wall, combining the cuts on two boards. To prevent the equipment from jumping out, two additional screws are screwed into the sides. |
You can purchase the types of factory brackets described above in the following places:
Table. Average prices for different kinds brackets for mounting a TV on the wall, rub.
Bracket type | Maximum screen diagonal supported for mounting on this bracket, inches | ||||
26 | 32 | 40 | 55 | 65 | |
Swing-out | 600−800 | 1000−1200 | 1300−1500 | 1500−1700 | 2000−2200 |
Pan-tilt | 400−600 | 800−1100 | 900−1000 | 1100−1300 | 1500−2000 |
Angular | 800−1000 | 1200−1500 | 1500−1600 | 1700−1800 | 2000−2200 |
The most convenient and profitable way to buy required type Wall mounts for a TV can be found in trusted online stores of household appliances that have a long history and good reputation. Unlike a market point or hypermarket of household appliances, an online store has the most low prices due to the absence of the need to pay rent for premises or salaries to staff. Buying a bracket on the market does not bode well - a market product is designed for a wide range of consumers, as a result of which, at a low price, it has the same quality.
Mounting a TV on the wall is convenient and reliable. It cannot be thrown off by a child or an extremely frisky pet. In addition, such placement of equipment allows you to save space and make the interior more modern and attractive.
An important task is not just to mount the TV on the wall, but to do it as comfortably and conveniently as possible. It is convenient to look at a screen hung close to the ceiling only from a lying position. Other positions may cause tension in the eyes and neck.
Proper placement of the TV is not only about installing it, but also about maintaining the interior design. The device can be framed with a special decorative frame or installed in a niche of a certain color. It all depends on the individuality of the interior.
Installation can only be carried out on a flat and clean surface, without protrusions or depressions.
The distance from the floor is not less than a meter, and the distance to the nearest place where you watch the TV should be at least three times the size of its diagonal. It is possible to look at the screen without loss of image brightness if it is attached to the wall at an acute or right angle.
Installation locations where equipment may be directly affected should be avoided. Sun rays. As a result, the image is lost and the surface may suffer. It is not recommended to install the TV mount on the wall near window or door openings.
When assembling the bracket with your own hands, it must be well fixed to the wall surface. For reliability, you can use a thick thread or belt.
Devices for attaching plasma to a surface can be stationary or rotary.
In the first case, the bracket is simply installed against the wall, and the TV is permanently fixed in a certain position.
Rotary ones have more functions, but such devices are also more expensive. Rotary, in turn, can be divided into:
Brackets are produced in different sizes for different TVs. Mounts for a 32-inch TV on a wall are often tilt-and-turn, and for larger diagonals they are tilted and stationary. Everything is connected with a large mass of devices with wide screens. The option simply will not withstand the load.
Any type of bracket can be purchased at the store. The more, the higher the cost of the bracket. Therefore, it is not surprising that many people have a desire to make
Before starting work, you need to decide what type of mounting for the TV on the wall will be. ready-made version. A stationary bracket is easier to manufacture. You can save several times by not buying one for a large TV.
By preparing a drawing, you can understand what materials and tools will be needed for the work. Calculations can be done manually or using a computer program. The diagram can also show the reliability of the connection of parts. She should be on top level, otherwise the structure will not withstand the weight, and the long-awaited purchase will simply break into pieces.
A simple wall mount for an LG TV and more consists of three bars, they are selected according to the length of the structure. Holes are made in one of them at equal distances from each other. This block will be attached to the TV body. This should be done carefully, without damaging the equipment.
Fastening is done using bolts. The second block is mounted on the surface; its fastening must be careful, also using bolts. There will be a third bar connecting the device to the wall; you can use it to adjust the angle of inclination. Then the entire structure is firmly fixed.
A wall mount for a Samsung TV can be assembled from a rectangular pipe. Pipe sizes should be selected individually for your model, taking into account functionality.
If the distance is small, for example only 20 mm, then the panel will be tightly adjacent to the wall, and the ability to connect equipment will be difficult. At long distance from the surface, for example 60 mm, there will be an opportunity to connect additional wires, but such a design looks ugly. The best option the distance becomes 40 mm. And the pipe height can be 60 mm.
Its length depends on the length of the TV itself and the distance between the mounting holes. A 42" TV wall mount must be able to support its weight.
Having decided on the dimensions, you can prepare the right pipe. Next comes marking for the holes. On the pipe itself you need to make holes with a diameter of 10 mm for mounting the TV, and for mounting on a wall - three more with a diameter of 8 mm.
They are marked at the same distance from each other and from the edges of the pipe.
The grooves for the TV mount should be tortuous, this will prevent accidental lifting or displacement.
The pipe can be attached to the wall various devices. If it is brick, then it is better to use dowel-nails; if it is wooden, then use self-tapping screws. The main thing is to complete the main task - a strong fastening. Then the workpiece can be given a noble appearance by painting it. This rectangular pipe piece will be attached to the wall.
If necessary, the TV mount on the wall can be adjusted in tilt; for this, one of the bolts can be used longer, and a lock nut can be installed on it, which will adjust the rotation.
In order for the bolts to gently rest against the wall, you can put rubber pads on them, which can be made from scrap materials, for example, from an old hose from a car. The TV is installed with two screws with stops and bolts with washers and bushings. The TV comes with special mounting strips; they also need to be secured.
We assemble the entire bracket at the installation site.
First, we attach the prepared pipe to the wall using nails or self-tapping screws. It is more correct to carry out the installation with building level. Next, hooks are made opposite the loops attached to the TV.
Now you can mount it on the wall for Samsung TV. It is better to do this with an assistant, even if the panel weight is small. You should hang the TV, adjust the angle and secure it firmly.
When installing the panel permanently in a specific location, it is correct to hide the cables in a hole in the wall.
To do this you will have to cut a channel. If the feasibility of such a channel is in question, you can simply cover the wires with a special plastic box. It can be purchased at any hardware store. Initially he white, but it can be painted to match the interior or made contrasting. You can cover the box with wallpaper in the same color.
So, we found out how to make a wall mount for a TV with your own hands, so as not to resort to the expensive help of professionals.
A flat LCD TV receiver on the wall is very beautiful and stylish. Mounting a CRT-type TV in a suspended position allows you to save space. This is especially true in kitchen areas. However, the cost of factory fasteners cannot be called low. Let's talk about how to make a TV mount on the wall with your own hands.
Supports, depending on the device, are of 2 types:
Important! The advantage of such a system is its extreme simplicity.
Before you make a TV bracket for the wall with your own hands, let’s decide on the materials. All you need to make it is two wooden planks:
Important! To ensure that the screen is positioned at a slight angle, you need to select the top bar so that it is 20-25 mm thicker than the bottom bar.
Operating procedure:
Important! This - great option for flat receivers with a diagonal of 26 inches. The system is robust, reliable and easy to implement.
LCD TV receivers have limited viewing angles, so a mount equipped with a rotating angle mechanism will allow you to comfortably watch TV shows from anywhere in the room.
How to make a TV bracket? To make the mount you will need 2 plastic, wooden or metal plates. The more massive the TV device, the larger their size.
Important! If the dimensions of the device are small, then plates 200x200 mm, 8 mm thick, are quite suitable.
Mounting Features:
Important! To make the system more maneuverable, you can use 2 pipes connected by a long bolt and fastened with nuts.
The DIY swivel TV wall mount is ready!
Compared to LCD devices, CRT TV receivers are more massive, all other things being equal. It is unsafe to fix such a device by the back panel due to its relatively large weight. Therefore, a suitable option here is a support with a stand, on which, in fact, the TV device is installed.
So, you will need:
The procedure is as follows:
Important! To make the structure stronger, secure it with a washer between the pipe and the angle.
Brackets are simple devices used for mounting televisions, as well as other household appliances. They are very popular as they can significantly save space in the room. Basically, stands are used in the kitchen to place small TVs. When watching a movie, the bracket will be invisible due to the equipment installed on it.
There are many types of fastenings. Tilt and swivel brackets are plasma friendly and allow you to adjust the position for easier viewing.
Fixed fasteners are in most intimate contact with the wall, so they are ideal option if you plan to install a very large TV.
Both of the above options are mounted on the wall, which is why they are called wall brackets. In addition to them, there are also ceiling fasteners. This design has the ability to change position by tilting and rotating. This design is also very convenient for placing a TV, but it can only be used in rooms with a high ceiling.
Any type of bracket can be purchased at both a household and hardware store. They are affordable in price. But it is still possible to invent a TV bracket with your own hands. This process is very painstaking and takes a lot of time. Also, if you have a non-standard TV, you can order fasteners for it from a specially trained person (master), according to the size.
So how to make a TV bracket with your own hands? Before starting work, prepare a fastening drawing. It can be made to order, drawn by yourself or produced in computer program. The main thing is to imagine what it is and what elements it consists of. In terms of the quantity and cost of materials, homemade fasteners will halve the cost of a purchased bracket. But if it is assembled incorrectly, it can cause costs due to damaged household appliances. Therefore, during its production you should be extremely careful, and after work, check it for reliability, using unbreakable elements.
Brackets for LCD TVs
Several bars are used for the main material, their length is selected according to the width of the TV. Using a puncher, holes are created in the material. The distance between them should be the same size. The first bar is attached to the TV and serves to attach it to source material. It is attached using bolts. The procedure should be done very carefully so as not to damage the surface of the household appliance. The second material is intended for fixing on the wall. It is also attached using bolts and must be in careful contact with the wall. The TV is connected to the wall using a third bar, which also adjusts the angle of inclination. All three materials should be tightly connected to each other and form a lock.
When fastening, it should be taken into account that the distance of the fastener from the floor must be more than one meter. The distance from the sofa to the TV should be approximately three times its diagonal. To ensure that the brightness of the image is not affected, the angle between the fastener and the screen should be either acute or straight, that is, not exceed 90 degrees.
Brackets for mounting plasma TV
The bracket should only be installed on a clean wall that does not have unnecessary bumps or holes. Do not install it near windows and doors. Also, do not install in places exposed to sunlight, which will reduce image quality and can damage household appliances.
The most durable material should be chosen. Any household appliance can become hot when viewed, and therefore there is the possibility of a fire or ignition. In addition to the TV, you can use fasteners to install other household appliances, such as a microwave oven, toaster, speakers and much more. For kitchen TVs, for convenience, fasteners are made, right in kitchen corner. It is important to maintain the correct angle when installing.
The DIY TV bracket must be securely located in the wall surface. For greater reliability, household appliances are secured using belts or thick thread.
Here's a video on how to make a TV bracket with your own hands:
Before or after purchasing a TV, the happy owners of a new device are faced with quite logical questions: “Where and with what help to attach the newly purchased TV?” This article addresses the following issues: how to choose a TV bracket And how to make a TV bracket with your own hands.
The first thing that comes to mind is to find a ready-made TV bracket in a store, which without a doubt is ideal solution. But what are the differences between these products, and how to choose the right TV bracket, is a mystery to many.
The price of these mounts starts at $7 and can exceed $150, so it makes sense to understand what it depends on and what to choose.
Expensive brackets have more options for adjusting the tilt and swivel of the attached TV. The greater the angles of inclination and rotation, the higher the cost of the product. The cheapest models have no adjustment, they are static.
The maximum and minimum diagonal of the TV screen for which the bracket is designed. Again, the larger it is, the higher the price.
The cost of the bracket is greatly influenced by how far it is placed from the wall. Minimum distance the distance of the bracket from the wall can be 10-13 mm, and such brackets are cheap. But to purchase a bracket with a reach of 400-550 mm, you will have to spend $60-100.
Brackets for ceilings, walls and tables are available for sale. The mounting location is selected individually, depending on preferences. Since wall-mounted brackets are more common, find suitable model at an affordable price it will be easier in this category.
The maximum load on the bracket directly depends on the weight of the TV. The more the bracket can withstand, the more reliable and expensive it is.
Now, let's move on to creating a bracket with our own hands. Since you have reached this section, it means that you have already studied the entire store assortment of ready-made brackets, and you were not satisfied with something about them (just like me).
Here's a photo of what we ended up with to make it clear what we're talking about.
The task was to hang the TV strictly opposite the bed, while the curtain should not be affected in any way. This means that the simple option of attaching the bracket to the wall at a right angle was no longer needed.
After watching ready-made solutions, More or less suitable options We found only from $80, since we needed a bracket with a 545 mm offset and a significant angle of rotation, in general, we couldn’t afford it. The rotation angle was necessary, but tilt adjustment was not needed, and this already simplified the task, because making a TV bracket with tilts with your own hands is something unrealistic.
It was decided to use a long gate loop as the base. This loop can withstand a load of 50 kg, which is extremely reliable for a bracket.
The loop itself was secured to two anchor bolts, but nothing else is needed here, now the loop can only be pulled out with the wall.
Next, a piece of board was cut out, which serves as the connector of the bracket to the TV. The board with the bracket is connected with bolts with a truncated cone, this is done so that the heads of the bolts are in the same plane with the board, and nothing rests against the TV.
Then the wires were laid in a cable channel, which was secured with glue.
We also installed a separate outlet for the TV.
At this point, the installation of the bracket was completed, and all that remained was to fix the TV on it.
The gate hinge is the main and only expense; it cost 140 rubles. It doesn’t even make sense to count a piece of board and bolts, since these are pennies. IN total costs for the bracket itself did not exceed 200 rubles. The creation of a bracket for the poor has been successfully completed. If you decide to use the ideas from this article, leave a comment on it, good luck!