The dacha has long been a place of mental relaxation and recovery after everyday work for a city person. Some summer residents prefer to create a mini-collective farm on their site with regular planting of various healthy vegetables and fruits, while having all the necessary products all year round. Someone just wants to relax on a piece of nature, breathe in unpolluted air or go to a barbecue. But the holiday is especially pleasant when country cottage area really well maintained.
Beautiful decorative elements plywood can turn any dacha into a work of art and weekends at the dacha will bring much more pleasure. Crafts from plywood and sawing from plywood (how to saw from plywood can be found here) - it’s not that difficult. The main thing is to have correct presentation about materials and tools.
The first and most important criterion for a job well done is right choice material. Plywood is the most common material in this matter: its physical properties are most suitable for cutting with a jigsaw. But there are several varieties of plywood that correspond to a certain type and scale of the future wooden product.
To work better with physical properties plywood, you need to understand how it is structured from the inside. Plywood sheets are made from veneer - a sheet of wood (from 0.5 to 1.5 mm thick), which is made by cutting a thin layer of solid wood different ways(peeling, planing or sawing). The most natural and most durable material - natural veneer, produced by planing or sawing. The plywood itself is made by gluing several layers of veneer in a cross pattern (along and across the fibers) using a factory or manually. A very durable material, available in many construction markets and having excellent qualities both for making crafts and for household work. The only thing that should not be allowed is moisture. There are a great variety of types of plywood: painted, with backings made of other materials, from peeled wood, from a solid cut (or rather, sawn), etc. The leaf thickness is usually 0.5-2 cm.
If the work is large-scale, with large elements, then it is worth taking thick, multi-layer plywood. If you have to cut out miniature parts, then a thin sheet of plywood is more suitable. But in any case, the material must meet a number of requirements, by paying attention to which you can wisely choose a good product:
In addition to the basic product, there are a number of products that will improve appearance Your work is made of wood and will extend its life. This is especially important when the plywood figurine is exposed to weather conditions, standing in the sun and exposed to moisture in the country. There are several methods of final processing: painting, staining (impregnation with varnish or paint), lamination, etc. Usually 1-2 layers paint coatings enough to create protection for a plywood craft.
You can also cover the product with an ornament or design. For this you can use different kinds paints: acrylic, gouache, watercolor. The main condition for painting: before starting, sand the plywood and prime it acrylic varnish or even PVA - this way its decorative qualities will become much better.
Tools for sawing plywood products can be either manual (hand jigsaw, hand drill, screwdrivers) and electric (jigsaw, band saw, electric drill). What you should definitely stock up on before starting to work with plywood:
It is also important to arrange a place for comfortable work with tools. There are specialized workbenches for sawing, but you can do without it if you have a table on which it is convenient to place a jigsaw and other tools. But it is better to equip the table with an additional platform for the machine: basically, this is a formatted piece of timber attached to the table, which will serve as a platform and clamp for the jigsaw.
A jigsaw is often used for coarser parts: small and technically complex elements are best cut out by hand. Band-saw In general, it is mainly applicable for thick sheets, the elements from which are often made large: the power of the saw is even higher than that of a jigsaw, so it is used very rarely for artistic purposes.
A drill or awl is used to drill holes and small parts that cannot be made with a jigsaw. A thin drill can also be used to round out curls and other shaped elements.
There are 3 types of files, which are the main working element of a jigsaw:
For inexperienced craftsmen, the second option is more suitable, since it is easy to use and contributes to the rapid development of dexterity in sawing, the so-called. "stuffing" the hand. Unlike a file with large teeth, a file with a thin blade is designed for small parts and is much more difficult to control. In the hands of a beginner, it can easily break, since without experience in working with complex parts it is impossible to feel the tension force of the file. When purchasing, you need to pay attention to the quality of the teeth and the strength of the blade: a good file bends freely.
Before starting cutting, prepare necessary materials and tools. We check the quality of plywood. If it satisfies your task, you can begin to grind its surface before cutting out coarse-grained and fine-grained sandpaper.
Then we make a sketch or transfer the drawing of the drawing onto the material (it is better to do the sketch in such a way that you have to cut less along the fibers). It is advisable to make the drawing carefully, without smearing the parts, as it will be more difficult to cut them out later.
According to the drawing, holes are made with an awl or drill in those places where the cut with a jigsaw will begin. Try to plan and drill all the holes in the plywood in advance, as once you start sawing, the sheet may crack under the drill. Before cutting out figured parts, it is worth practicing the technique on simple objects.
During operation, the jigsaw (file) is directed from top to bottom, so it is important to properly fasten the blade so that the cutting part is directed downward. It is also important to properly thread the blade before starting work so that there is tension in the saw blade. But there is no need to leave it in this state after finishing work, just as you should not leave a file stuck in the product - it can easily break.
When working at the machine, be prepared to constantly change the position of the workpiece: make several cuts in 1 hole, thus allowing the product to rotate freely around the blade.
If the tool deviates from the pattern when sawing, try to free the blade, giving the file free space and correct the direction.
At the end of the work, all edges are brought to a smooth state with a file and sanded with sandpaper - now the product is ready for coating paint and varnish materials. Here you will need a brush for varnish or PVA glue. It is advisable to coat the product in 1-2 layers. If you plan to paint on plywood in the future, it is better to apply one layer.
Here are examples of some plywood works for the dacha, made by cutting with a jigsaw. Thanks to them, the garden and dacha as a whole look well-groomed, which inspires you to create your own masterpiece. To create your own work, just a little practice and imagination is enough.
A few examples of drawings will help you decide exactly how you can decorate your garden at the dacha:
Before making furniture from plywood with your own hands, which can serve faithfully for a long time, you should study all the physical properties of the material and the rules for its processing.
Plywood is a material that does not require any special tricks during processing. This material, used in making furniture from plywood with your own hands, has another significant advantage - low cost.
Plywood is a material that does not require any special tricks during processing
There are a large number of drawings that allow you to make furniture from plywood with your own hands. Such drawings can be easily found on specialized websites that are dedicated to making furniture from plywood with your own hands; in addition to drawings, on such resources you can see photos of finished furniture made from this material and the corresponding description for them.
Very often, plywood is used as a material in the manufacture of furniture intended for placement in the country house or in a children's room.
Such furniture is characterized by ease of manufacture and a high degree of environmental safety, which determines its high popularity.
Such furniture is characterized by ease of manufacture and a high degree of environmental safety, which determines its high popularity.
A large number of Homeowners are interested in how to make furniture from plywood with their own hands. First, you should study what types of plywood exist and how to work with them.
The production of any type of plywood is carried out from veneer, which is glued together during the production of the material with adhesive mixtures. The quality of the material obtained during production depends mainly on the material used adhesive composition.
The production of any type of plywood is carried out from veneer, which is glued together during the production process of the material with adhesive mixtures
Thanks to the glue, the panel acquires:
For making plywood domestic producers Veneer made from birch or coniferous wood is used.
Plywood made from coniferous wood has beautiful design and is used exclusively for the production of furniture. To reduce the cost of the material during production, hardwood veneer can be used, on which upper layer softwood veneer.
Plywood made from birch wood has a contrasting structure and is monochromatic. When using birch wood, plywood is more expensive.
Important! Birch plywood weighs more than plywood, which is made using wood from coniferous wood.
Depending on the degree of processing, plywood is divided into 3 categories:
Bending strength of plywood
There are 6 types of plywood, which differ in the composition of the adhesive component used in production:
Plywood characteristics table
On a note! Based on the presence of defects and natural defects in the wood used, the produced material is divided into 5 grades.
Grade E material is considered to be of the highest quality.
To make furniture with your own hands from plywood, you should cut the sheet before starting operations. When cutting the material, accuracy should be observed, since in the future this parameter can affect the entire furniture assembly process.
For cutting thin plywood a sharp knife is used, a jigsaw is recommended for cutting medium-thick plywood
At the same time as cutting accuracy, it is necessary to be careful when cutting and avoid the formation of chips. The absence of chips increases the design quality of the structure. To cut the material, use a jigsaw or an electric circular saw. To prevent chips from forming on front side, when working with a jigsaw, you need to draw a drawing on front surface material, and when using a circular saw, the drawing is applied to the back plane.
In order to completely get rid of the slightest chips, you need to use a shoemaker's knife to cut through the top sheet of veneer to the width of a jigsaw blade or saw. To perform this operation efficiently, the first pass is made without strong pressure as a mark, and then another 2-3 passes are made with a knife with strong pressure.
Cutting and cutting plywood sheets is best done along the grain. With this cutting method, the smallest number of chips appears when all the requirements of the technological operation are met.
To cut thin plywood, a sharp knife is used, a jigsaw is recommended to be used for cutting medium-thick plywood, and if thick material is used when assembling furniture, it is recommended to use a special circular saw to cut it.
If, when constructing furniture from plywood with your own hands, plywood from soft types of wood is used, then under fasteners special washers should be placed that reduce negative impact fastening to wood, photos of how to properly install special washers can be viewed on specialized websites dedicated to assembling furniture structures with your own hands.
When constructing children's furniture from plywood with your own hands, you should Special attention pay attention to the processing of end elements, this is required to minimize the likelihood of injury when children use the product.
Designing furniture to furnish the kitchen space requires care when drawing up drawings and assembling structures.
DIY plywood set
During assembly kitchen sets It is recommended to use moisture-resistant types of material that have high resistance rates. The fact is that the kitchen is a room with a high level of humidity, and this, in turn, can negatively affect the plywood.
When designing furniture, it should be taken into account that kitchen area the room ventilation system and other engineering Communication, which must be hidden and at the same time must have free access for repair work.
When designing floor cabinets, you should remember that their height and depth should be calculated taking into account the size of the countertops used when assembling the furniture.
When calculating the parameters of the side walls, the thickness of the doors used in the furniture design should be taken into account.
When assembling kitchen furniture, special attention should be paid to corner wall cabinets, since assembling these elements is fraught with difficulties
When assembling kitchen furniture, special attention should be paid to corner wall cabinets, since assembling these elements is fraught with difficulties.
You can see in detail how to design plywood furniture with your own hands in the video, which is easy to find on specialized websites dedicated to self-creation furniture.
When designing floor cabinets the best option There will be the use of solid thick plywood boards.
Using plywood, you can make almost any furniture for your home; it could be, for example, a bed or a rocking chair, a closet, both floor-mounted and wall-mounted.
Using plywood, you can make almost any furniture for your home, it could be, for example, a bed or a rocking chair, a closet, both floor-mounted and wall-mounted.
Such furniture is distinguished by its originality and uniqueness, which can surprise any person. Furniture made with your own hands from plywood can become the pride of the home owner.
To design a bed, you will need to prepare a drawing or sketch indicating the dimensions of all structural elements.
After preparing the sketch, it is necessary to prepare a plywood sheet with a thickness of at least 18 mm, the length of the workpiece should be 3 m and the width 1.5 m. A sheet 2 m long is cut out of a single sheet. This cut will subsequently serve as the bottom in the design of the bed. After preparing the plywood sheet that serves as the bottom of the bed, the ends of the workpiece should be thoroughly processed with sandpaper. The remaining cut from the initial blank can be used in the manufacture of such a structural element as the head of the bed.
If in the process of constructing furniture a sheet that does not have lamination is used, then after assembling the structure, the head of the bed is covered with stain or paint and left until completely dry.
The construction of a frame base requires a careful approach during design and assembly. At the design stage it is necessary to carry out exact calculations design parameters. The bed frame is made of timber. For assembly, you need to prepare 2 pieces, each 2 m long and 2 pieces 1.5 m long. In this case, you should take into account the width of the beam. The bars should be connected to each other using screws or nails.
The bed frame is made of timber
The previously prepared bed bottom is attached to the prepared frame. The bottom should be secured using long bolts. On internal corners the legs of the bed are fixed to the structure. The legs of the bed should be made of timber.
Decorating a bed made of plywood is the last stage of DIY furniture production.
The headboard of the bed should be installed using long bolts. The headboard can be decorated using fabric intended for furniture finishing. In addition, the headboard can be finished in any way. in a convenient way. If desired, during the finishing process, fabric is used, under which foam rubber is placed; this approach to finishing the headboard makes it more contoured and embossed.
Most often, furniture stores offer their consumers designs of rocking chairs designed for one person. Those who like to design their own furniture for their home can make this piece of furniture for two people.
Who said money doesn't grow on trees? Plant such a tree in a secluded place and regularly fertilize its roots so that over time it will bear a rich harvest.
In this project I wanted to play with the metaphor “ Money Tree” and I decided to really show that in the stylized design elements. Coins pour through the leaves, accumulating at the roots in the form of a fabulous treasure. Simple technique Stroke allows you to achieve a three-dimensional effect using a single template. I hope you have a lot of fun working on your piggy bank.
John Olson, designer
1. From 3mm cherry plywood, cut four pieces measuring 280x280mm for the four front layers A-D. From 6mm cherry plywood (or glued 3mm) make a blank measuring 280x406mm for the back layer E.
2. Make three copies of the tree template. Cut off the root part of all templates and discard, leaving only one for further work. Using spray adhesive, attach one copy of the tree template to the first layer blank A, aligning the bottom line of the barrel with one of the ends. Set the rest of the templates aside.
3. With a #2 file in the jigsaw, cut the wood along a solid contour line. Saw off the crown from the trunk, and then make a cut in the crown. Note. The first layer A is the only one, in which you need to separate the trunk from the crown. This will help prevent the stain from spreading when tinting the trunk.
4. Tape the trunk to the crown again A and place the wood on the next piece IN. Using a pencil and a small washer, trace the sawn tree to create a new, slightly enlarged outline on the workpiece. (photo A). Make sure the cutout is outlined as well. Cut out layer B and make a hole for the file in the middle of the cutout.
Insert the tip of a pencil into the hole of a small washer and trace around the cut wood. The washer serves as a spacer that increases the contour.
Quick tip! DFor greater expressiveness and increased apparent volume, alternate the direction of the wood fibers in the layers. Shine, one of the properties that characterizes the appearance of wood, changes intensity depending on the angle at which the surface is illuminated.
5. Take one of the copies of the template, cut out the right part including the layer coin channel IN, and glue it to layer B (photo B), aligning the indentations on the edges. Now cut out only the channel for the coins in the layer IN. Then staple the layers together IN tape (including the sawn channel). Continue enlarging the outlines to cut out the layers. WITH And D from the remaining 3 mm blanks. Glue the remaining copy of the template to the layer D, cut out a channel for coins and fasten all parts of the layer D with tape.
To avoid mistakes when cutting out a coin channel, use only part of the template. This will avoid mistakes and damage to the workpieces.
6. Take a copy of the root template and attach it with spray adhesive to the bottom of the 6mm piece. Align the layer D along the center and top edge of the roots template. Use the washer to enlarge the contours of the tree one last time. Note. This time the cutout in the middle will be too small, so it's better to mark it by hand without using a washer.
Drill holes for the file in the layer E to make cuts in the crown and roots. Cut out the layer E and remove the paper templates from all parts.
Your piggy bank will become four times more burglary-resistant and will discourage a potential thief (or prankster) if you use screws with different types splines. Using one screw of each type (Phillips, Torx, slotted and square), designer John Olson was able to see that not everyone can pick up a screwdriver and get to your treasures.
7. Carefully apply a thin layer of white PVA glue (we chose white glue because it becomes colorless after drying) to the back of the two parts of the layer D, without smearing the edges about 3 mm wide to avoid squeezing out the excess. Lightly press the layer D to layer E, using the scrap from cutting the channel to accurately position the parts, secure the gluing and remove the scrap. Wait for the glue to dry and glue the layers in place sequentially. C, B and A.
1. Cut out the sides from a 19mm maple board F, upper and lower walls G. Cut out the posts from 6mm material N and crossbars I the specified width for the front frame with an allowance of about 25 mm in length.
2. Install a dial-type groove disk into the saw machine and secure a wooden pad to the longitudinal (parallel) stop. Cut 10x13 mm folds along the rear inner edges of the box walls F, G, as indicated on drawing. Move the fence to cut 19mm rebates at the ends of the side panels. Then adjust the position of the stop and disk to make 10 mm wide folds for the plexiglass on the inner edges of the frame posts and crossbars N, I.
Hold the legs of the compass in a vertical plane to mark the outline of the cutout using the drawing method.
3. Spread the legs of the compass by 13 mm. Lay down the tree A-E onto the workbench and press the top wall of the box against the bottom cut G and use a compass to draw the contour of the cross section of the trunk onto it (photo C). Then using jigsaw machine cut a notch in the top wall and double check the fit, making adjustments if necessary. Glue the sides of the box F, G.
4. Make bevels at the ends of the posts and crossbars of the front frame N, I, adjusting its dimensions to the box F/G. Glue the frame, fix it and wait for the glue to dry. Measure the fold on the back of the frame and cut out a piece of clear plexiglass J 3 mm thick for the window. Glue the frame N/I to the box from the front, placing the plexiglass in the fold.
5. Measure the fold on the back of the box F/G/H/I and cut out the backdrop TO made of 6mm birch plywood. Drill and countersink holes for screws in the backdrop (see Fig. drawing).
1. Carefully tint the trunk and roots with a dark stain (we used General Finishes Antique Cherry stain on oil based) and let it dry. Quick tip! So that the stain does not spread from the trunk to the crown in layers B-E, make cuts in the outer layers of veneer with a sharp knife to create a clear border.
2. Cover the transparent window J masking tape and apply a colorless coating to all parts of the piggy bank. (We sprayed the semi-matte nitro varnish three times from an aerosol can, sanding in between with 320-grit sandpaper.)
3. When the coating is completely dry, assemble the piggy bank by screwing in the screws, with the roots located between the box and the backdrop. Now empty your pockets of change and watch the mountain of treasure grow.
Wood carving with a jigsaw is rapidly gaining popularity: many people want to purchase an interesting decorative item to decorate their home, furniture, and even clothes! Carved objects of various thicknesses fit organically into any interior style; people often purchase photo frames for photographs with ornaments, cut-out words and letters, or order intricate shelves and other interesting products. Few people know that artistic cutting out of plywood with a jigsaw is a task accessible to anyone, even the untrained and inexperienced. You just need to understand how to work with the tool.
A jigsaw is a tool designed for cutting various contours from plywood, including curved ones. It is equipped with a blade with fine teeth that can make an even cut of plywood without the formation of significant burrs.
The ancestor of this type of tool is a manual jigsaw. It consists of a metal arc in the shape of the letter “U”, between the ends of which a sawing blade is stretched and attached to clamps. They securely hold the file during operation and allow you to adjust its tension. On one side of the frame there is a handle.
The clamps on the tool can rotate, creating different planes for sawing, thereby providing the opportunity for wood carving of varying complexity.
When cutting from plywood with a hand jigsaw you have to be careful: its design is quite fragile, with intensive work the blade often breaks from force and heat, so it has to be replaced. To do this, each master must have several dozen spare files.
When working with a jigsaw to carve internal contours, it is convenient to use such an auxiliary board as in the photo: it will help both protect the table and solve the problem of convenient placement of the workpiece.
The tool operates from an electrical network. It is a housing in which the working mechanisms are located, and there is also a handle for control on it. The sawing organ is located in the lower front part. The blade is often protected by a foot, which allows you to cut the contour exactly along the line without deviation. Advanced and professional models jigsaws have various attachments, facilitating the cutting process and leveling the edges of plywood.
Blades can have different teeth in shape and size. It is necessary to select saw blades that are appropriate for the material being processed so that damage and damage to the plywood sheet does not occur during operation of the mechanism.
Classification of jigsaws by power and application:
The instructions on how to use a jigsaw, or the technical data sheet, should describe the main parameters of the tool that must be taken into account when using the mechanism.
Sawing with a jigsaw is a creative process, but it requires preparation and additional equipment. What you will need for work:
Drawings for cutting with a jigsaw can be different sizes, depending on the scale of the product being manufactured. To create a diagram of a shelf, a piece of furniture or a composite three-dimensional toy, you can take large leaf Whatman paper A1 or A0, the wallpaper remaining after the renovation will also work; for small figures, use regular A4 paper or another suitable format.
Using a bright pencil or marker, draw the outline of the future product on the surface, following the dimensions. This could be an element for assembling furniture, a shelf or another large product.
Templates for cutting with a jigsaw are presented online in such a wide range wide variety that choosing the right one can be difficult. It is much easier to come up with your own cutting patterns and transfer them to paper.
Before you start cutting with a jigsaw, you need to transfer the image from the stencil to a piece of wood or plywood. To do this, cut out a shape from a sheet, apply it to the surface of the plywood and carefully trace it. It is desirable that the line be smooth and accurate. We use with a simple pencil so that if necessary, you can correct the line by erasing it with an eraser.
We apply the outline from the back side so that finished product no remnants of the lines were visible. Inner area can be shaded so as not to cut off excess and to mark untouchable areas.
It is important to transfer the design in such a way as to minimize cutting along the grain with a jigsaw - it is so difficult to get an even line.
Many people have probably heard how to use a jigsaw. Working with the tool will not cause difficulties if you prepare for it correctly.
Plywood carving begins with the inner contours of the design. To do this, you need to make slots for inserting the tool blade:
How to saw with a jigsaw:
Working with a jigsaw is much easier than using a hand tool; there is no need for physical effort and the process goes faster.
How to saw with a jigsaw:
As you can see, there is nothing complicated in this process.
If you did not follow the technology or held the tool incorrectly, the saw may simply move off the line. Why does a jigsaw cut crookedly:
To avoid such problems, before starting sawing, be sure to check the tension of the saw and the fastening of all working elements. If the blade is beveled and stuck, it is better to start over and make a line parallel to the defective one.
Safety precautions when working with a jigsaw for cutting plywood and wood are simple:
Wood carving with a jigsaw requires care and attention. Both your health and the integrity of the finished product depend on these qualities.
Sawing wood with a jigsaw or hand tools is a creative process. You can create many decorative items different directions:
Drawings of plywood crafts do not have to be made in exact dimensions. Even taking an example from the Internet and changing its proportions, you will get a unique product that no one else has in this form.
DIY plywood crafts can be painted or left in a natural color; you can glue buttons, beads, ribbons and other decor onto them to liven up the product. To do this, it is worth involving children in the work; their imagination is a bottomless well of interesting ideas.
We offer you diagrams with photos for cutting out of plywood with a jigsaw.
You can come up with your own idea of what you can cut using a hand or electric tool, make your own sketch and transfer it to paper, then to a piece of wood or plywood.
Carving plywood with a jigsaw requires certain knowledge and skills. If you don't have them, consider the following rules:
All photos from the article
Plywood is not only a unique building material, but also an excellent basis for manufacturing various crafts. Moreover, for this you will need a minimum of tools - manual or electric jigsaw, the plywood sheet itself, and the result largely depends on human imagination.
There are many options for using this material; in general, we can distinguish the following methods of using plywood:
This material also has a number of advantages:
Note! For use inside the house, you should choose sheets marked FC, this means that urea glue was used when gluing, which does not contain phenolic compounds that are dangerous to human health.
When making any craft, you can’t do without cutting plywood with a jigsaw (manual or electric).
There are several rules in this matter that should be followed in any case:
Note! It is important to correctly install the file into the jigsaw before starting work. The direction of the teeth should be as shown in the figure.
It is not necessary to make plywood products with a jigsaw using hand tools, the same quality can be achieved using power tools.
It is physically impossible to consider all the options for plywood crafts in one article. But it’s still worth stopping at a few interesting options.
As a test, you can try to make a couple of simple crafts consisting of only one element. There are many options, for example, you can try to cut out the outline of an animal from plywood and then paint it in the desired colors.
This level of complexity is suitable even for children; the work will be performed in the following sequence:
You can complicate the task a little and try to make a figurine consisting of several elements, for example, a Christmas tree or a snowman. A plywood Christmas tree with a jigsaw will consist of 2 parts connected like a tongue and groove.
To make it, you just need to trace 2 contours of the future Christmas tree on plywood and provide grooves in both elements. In one part, the cutout is made from the top, and in the second - from the bottom, the size of the cutout is up to the middle of the height of the future Christmas tree.
After cutting, you will need to sand the surface of the plywood and go along the edge to remove burrs and smooth out any sharp edges. Dimensions of grooves in the bottom and upper parts must correspond exactly to each other.
Note! Many do-it-yourself drawings of plywood products using a jigsaw can be found on the Internet, for example, on our portal. This is much more convenient than drawing on your own.
After mastering figure sawing, you can move on to crafts consisting of several parts. As an example, we can give a figurine of a snowman, consisting of a torso, a head, two legs and arms; all these elements will be connected to each other with an ordinary thick thread.
The basic principle remains the same - we draw up a drawing, cut out individual parts from a plywood sheet, and then move on to combining them. In addition to working with a jigsaw, you will have to drill thin holes in the plywood in order to thread the thread through them.
A plywood snowman is assembled into one piece using a jigsaw; you can put a small bright scarf around your neck. As is the case with other crafts great importance has the color of the figurine, the coloring should leave the impression that the snowman has just been brought into the room from the cold.
The options are relatively small and simple crafts There are many, and you can always make drawings of plywood work with a hand jigsaw yourself or simply find them on the Internet.
If you have a jigsaw, you can try to take on a larger task. It is relatively easy to make an elegant frame for a picture from plywood, and the picture itself can be made entirely of plywood.
A picture made of plywood can be easily obtained by combining light plywood and a dark background. You just need to cut it out on the sheet light color the desired outline and then fix it in a frame on top of a dark background. Due to this, the desired effect is achieved; externally, such paintings look no worse than ordinary ones, even more unusual, because traditional painting is more widespread.
As for the technology, to make a picture you only need a template with the location of the cutouts. You can make it yourself; to do this, just make the image you like black and white, add contrast and manually mark the position of the cutouts. Number of plywood layers different shades limited solely by the skill of the author.
Thin plywood is also suitable for making a frame for a picture or photograph, and frames made from plywood with a jigsaw can also be solid, that is, cut from one piece of plywood. The simplest plywood frame is a closed plywood contour (rectangular, square or oval) with figured sawing along the outer perimeter.
