There are 10 main ways to restore WiFi on modern TVs. Most of them involve fixing settings wireless network. The necessary settings on Samsung, LG, Panasonic and Sony devices can be changed at home, without contacting a service center.
Let's consider in turn all the main ways to correct configuration errors:
The first steps to take if WiFi on the TV does not work is to reboot the Smart TV and router. A malfunction may be software in nature and can be easily corrected by reinitializing device drivers. To reset your TV, turn it off and on again. Some experts also recommend removing the plug from the electrical outlet and then plugging it back in. This advice makes sense for those TVs that remain connected to the local network even after turning off the screen.
When rebooting the router, you must wait 10-20 seconds between turning off and turning on. During this time, the previous Internet session will be closed on the provider's side. Therefore, the connection will be made again, with the settings reset. When the Smart TV and router turn on again, try connecting to WiFi.
Using the Smart TV's built-in menu, navigate to Settings WiFi connections. Select the manual mode for specifying settings if the DHCP server is disabled on the router and the connection with automatic detection of parameters does not work. In the “IP address” line, enter any IP from the local range. Valid start and end addresses are available for clarification in the router admin panel.
In the “Subnet Mask” field, you must indicate which part of the IP range will be used to address local network clients. A common value for this parameter is 255.255.255.0. In the “Gateway” line, enter the IP address of the router that is used to enter the settings.
Advice! The subnet mask and gateway can also be checked through any computer connected to your router. To do this, select the command line in context menu"Start" buttons. In the window that opens, enter the command: “ipconfig /all” and press “Enter”.
This method is especially relevant for Samsung TVs. Accessing the Internet and multimedia content through Smart Hub is difficult when Samsung servers are overloaded. By specifying your DNS server addresses, the connection to Internet resources will be made directly, without using the manufacturer’s infrastructure.
DNS server addresses are specified in the provider's support. You can also use free public DNS. This service is provided by Google, Yandex, and OpenDNS. For example, to use Google address servers, just enter the IP of the main server: 8.8.8.8 and the additional one: 8.8.4.4. If there is no text field for entering an alternative server, enter only the first address in the DNS settings.
If you established a connection by manually entering your wireless network password, try connecting via WPS. WiFi Protected Setup technology allows you to activate the fast connection mode in the TV settings. After this, a similar mode must be activated on the router. This is done through the control panel or a special button on the back of the case.
To log into the router's web interface, turn the device over and look for the sticker with your login information. It is usually located on the bottom side and specifies the default IP address, username and password. Enter the IP in any browser and enter the account information available on the sticker. Then go to the “WPS” section and activate this feature. Fast connection will be available within 1-2 minutes.
In the case where the WPS protocol was initially used, but at the moment it is impossible to establish a connection, enter the information manually. When connecting to a hidden network, you will need to specify not only the access key, but also the WiFi name (SSID). TVs with earlier versions of firmware do not always support searching for hidden networks. Therefore, before updating the software, it is recommended to remove hiding the network name in the router settings.
A quick way that in some cases helps solve problems with WiFi on Smart TV is to restore factory settings. Before executing it, it is advisable to rewrite the values of the main parameters not related to the network. After the reset, you can return them based on the recorded information. Menu path to restore factory settings on popular TV models:
Note! When installing factory settings, not only will the standard parameters networks. Settings for image, sound, energy saving and other Smart TV functions will not be saved.
Problems with the wireless network on the TV may be due to poor signal reception from the router. If possible, move the router closer to the Smart TV and install it so that there is less interference in the path of radio waves. The main obstacles to signal transmission are walls, pieces of furniture and working household appliances.
Installing an access point at an elevated location will help ensure better WiFi connectivity. For example, you can put the router on a cabinet or hang it above the door. If it is not possible to move the router closer to the TV, connect a more powerful antenna to it. The higher the antenna gain, the better the network will work on Smart TV.
Difficulties connecting to a wireless network may be caused by incorrect router settings. To change them, go to the control panel. Go to the DHCP tab and make sure the DHCP server is enabled and working properly. If you disable it, the TV and other network devices will not be automatically assigned a local IP address. Normal routing and Internet access will not be possible.
Check the "Security" tab in the router settings. If client filtering by MAC address is enabled, disable it. On routers from ASUS, TP-Link, D-Link, Huawei and some other manufacturers, the MAC address of any device can be whitelisted. In the future, connections of devices from this list will not be blocked, so normal WiFi operation on the TV will be restored.
The Smart TV MAC address is specified in the settings. The exact path differs depending on the brand; on most TVs from popular manufacturers, the necessary information is in the menu:
Important! After adding the Smart TV MAC address to the white list or changing other router settings, reboot it. To do this, use the “System” or “System Tools” menu item. You can also use the power button on the case or temporarily unplug the device from the outlet.
The built-in software of Smart TV needs to be updated in a timely manner. Errors can accumulate during operation, resulting in difficulties connecting to the Internet via WiFi. Depending on the TV model, the update can be done in several ways:
If WiFi on Smart TV does not work, to download new version software, use the second or third option. Detailed instructions Software updates are usually posted on the website of the company that produced the TV. Possible names of the desired section: “Help”, “Support” or “Help Center”.
While the utility is running, it is important not to disconnect or de-energize the device. Any interruption may affect the future functionality of Smart TV. Do not use firmware from third-party developers to avoid loss of warranty service.
This method will not help fix problems with the internal radio module. But if these are the reasons why connection errors occur, use external device. The form factor of such a WiFi adapter resembles a regular flash drive. Like most other devices, it works when connected to a TV via USB.
There is another type of adapter for WiFi reception on sale. They have an external multidirectional antenna that provides better signal reception from the router. It is recommended to connect such modules via a USB extension cable, placing them at some distance from the TV. Thanks to this connection, interference from a running Smart TV will be minimized, and the data exchange speed will increase.
Important tip!
A breakdown of the radio module in the TV is the main reason why the previous tips may not help solve the problem. If you have tried all the ways to solve WiFi difficulties, there is most likely a hardware problem. It is recommended to take the device to a service center. Within the warranty period, the WiFi module will be replaced free of charge.
If it is not possible to take the device to a workshop, you can use a cable connection. To do this, insert one end of the power cord into the “LAN” port on the router, and connect the other to the TV. Routers usually have 2-4 Ethernet outputs; you can use any of them to connect a TV.
Nowadays, there are a large number of different Samsung, Sony, Toshiba TVs on sale, which are equipped with various functionality that the consumer had never even dreamed of before. For example, many TVs today have a built-in Wi-Fi module, which allows people to expand the functionality of their simple TV. TVs with Wi-Fi are unique devices that can easily be transformed into real entertainment centers. With the help of a wireless network, you will no longer have to think about installing antennas, etc., this will make people's lives: convenient, calm, comfortable.
IN shopping centers There are different TV models available that have built-in Wi-Fi, so everyone can choose what they need and go online. For example, you can buy a Samsung UE55ES8000 device, with which you can get not only high-quality images, but also a large number additional functions. So, a 55-inch device will cost from 83-132 thousand rubles.
This TV has:
In addition, the consumer will be able to use the Skype program, which can also be used using the built-in video camera. Thanks to local dimming and proprietary Micro Dimming Ultimate backlight, the picture is dynamic. The LGI 47LM640S 47-inch device will cost approximately 34,000-48,500 rubles. It also has Full HD resolution, but the screen refresh rate is half as high, which does not prevent the picture from remaining of the same high quality.
Inside the TV you can find the XD Engine processor and built-in Smart Energy Saving Plus technology, thanks to which you can save a significant amount of energy. Where to buy a TV that connects to Wi-Fi? Stores with various modern equipment are located all over the world, and TV can also be purchased through the online store.
Before we talk about how to connect Wi-Fi to a TV and make sure that the TV catches the network, it must be said that first you need to organize a home Wi-Fi group, to which you may later connect a TV device. Make it possible different ways: via a Wi-Fi router or using a laptop as an access point.
One way or another, to access the Internet, a laptop or external router must be connected to the local network.
Then everything is not difficult enough. Despite the solid selection various models TVs that are presented on the domestic market, they all operate using the same type of connection. So, how to connect to a TV? You can connect your TV to the Internet via Wi-Fi using a router. It's not complicated here. First you need to connect to the local network and configure the adapter. Once this is done, then you need to connect the TV and configure it by going to settings.
Now let's take a closer look at how to configure Wi-Fi connection on TV. You need to find the “Network” item and connect a wireless connection. In principle, setting up is quite simple. Receiving data from the network is automatic, since the router has a DHCP function. This means that it automatically assigns an IP address to all equipment that connects to it. To search for connections that are available, you need to go to the “Network Settings” item. Then you just need to follow the prompts on the TV screen.
Then you need to select the appropriate items and at the end you will see a list of Wi-Fi networks that you can connect to, for this:
It must be said that if both devices have WPS, then the network settings will be minimal, further simplifying the task for the consumer. In this case, you just need to press the corresponding key on the router. Next, in the TV connection settings, you need to select the desired item. Thanks to these manipulations, the TV will automatically begin to search for suitable connections and establish a connection.
Now it’s clear how to connect to the Internet via Wi-Fi using a router. However, there are times when there is no router. In other words, the consumer does not have an individual local network to which it would be possible to connect television. In addition, sometimes you just need to play content on TV that is on your PC.
In this case, you should create a direct connection to your personal computer.
At the same time, if the laptop is connected to cable Internet, then the TV will have a chance to connect to the local network. Initially, you need to make a distribution. The computer has the same wireless module as the Wi-Fi router. This means that the PC can also create access point functions. In order to organize such an Internet network, it is possible to use third-party programs or included tools.
It must be said that the built-in PC software works unlike third-party applications:
So, let's talk about how to create a private Wi-Fi group using a PC using built-in tools. To do this, you need to open the command line. If you are using Windows 8, then press the Windows keys plus X and click on “Command Prompt”. In Windows 7, you need to press Windows plus R, write CMD in the window that appears and press Enter. Then you need to enter - netsh wlan set hostednetwork mode=allow ssid=My_virtual_Wi-Fi key=12345678 keyUsage=persistent.
It must be said that here it is necessary to strictly observe all spaces and use all symbols only in the Latin alphabet. This command will install the required driver and perform distribution. In order for the network to work, you need to enter - netsh wlan start hostednetwork. That's it, the Internet network is functioning and now you just need to connect the TV to it. Everything is done as mentioned above.
Now we should talk about how to connect to TV via a Wi-Fi connection. The fact is that innovative TVs can simply play content from a computer. However, for this it is necessary to expand necessary information. To put it another way, organize general access to it. This is done through special programs that make the settings minimal.
The list of such applications includes:
In addition, there are many programs, but the utilities listed above are popular due to their ease of use. You just need to install any of the specified programs on your laptop and run it. They automatically see video/audio/photo content and share files. First of all, in the program settings, you need to click on the device that will run the content. You need to choose your TV. Next, you should specify the folders in which the files are located and allow scanning. Then you need to select and click on “Start” in the toolbar.
It is not uncommon for some users of smart TVs (Smart TV) from the manufacturer Samsung to encounter problems connecting to the Internet. Typically, at home, consumers use a Wi-Fi router to connect remotely to a local network.
But, the reason why Samsung TV may not connect to Wi-Fi may be:
Experts advise changing the TV’s firmware via a flash drive, and not directly from the company’s servers over the Internet. A wizard will also help you find out why you stopped receiving Wi-Fi. service center. Sometimes it is difficult for an ordinary user to fix a problem. A professional can help you turn the network on or off.
Having decided to purchase a TV with Wi-Fi, you need to study the connection information or use the support of a specialist. Let the technology be convenient and practical.
Attention, TODAY only!
What is Smart TV? This is the Internet on a big screen, a symbiosis of the capabilities of a television receiver, smartphone and computer, providing media content to a wide audience, family video without a disc.
The TV connects to the Internet both via wires and without them. The basis of wireless connection technologies is Wi-Fi. The advantages of the network are determined by:
How to connect a TV to Wi-Fi, what is required for this in practice?
You need a device equipped with HDMI, VGA, AV, USB or RJ-45 ports and an Internet connection. In this case, you will need a set-top box with a Wi-Fi module. Its type is determined by the type of available television port. In the case of a USB port, you will need a flash drive adapter; If you use an RJ45 socket, you will need an adapter to USB.
Requirements for the console:
If the TV already has a Wi-Fi module installed, then the connection task is greatly simplified; you only need to have a router with Internet access. Of course, this option is the most successful design, providing bit information transmission speeds of up to 300 Mb/s.
It's intuitively clear how to connect your TV to Wi-Fi. Each connector is connected to its own socket, the connectors are inserted without tension, until it clicks. The network connector is connected to the appropriate socket.
The only difficulty may be in the settings.
If you have LG equipment, go to the menu item: “Network settings”, set to “wireless”.
Option 1. From the list of access points, select the name of the network, set a password for it using the remote control and menu prompts, click “OK”. Then you need to wait for the test results and then act on the suggestions from the screen. As a result, a network connection message will appear on the screen and a signal strength icon will appear.
Option 2. Suitable for a router equipped with a WPS button (protected setting). Select the appropriate item in the settings menu. On the router, press and hold the WPS button for about 15 seconds, and the setup occurs automatically.
Option 3. Select the “Ad-hoc network” settings item to connect the device directly to your computer if you do not need Internet access.
If your TV manufacturer is Samsung company, then the first two connection options are completely the same, two new methods appear: “One Foot Connection” and “Plug & Access”. Selecting the “One Foot Connection” setup mode does not require additional costs, but only installing the router near the TV and clicking on the “Next” button.
In accordance with the “Plug & Access” technique (must be provided by the router), the flash drive is inserted into the router, you should wait until the indicator stops blinking, pull it out and insert it into the Smart TV. The connection is established automatically.
How to connect a TV to Wi-Fi is no longer difficult. This setting, like other television functions, is carried out using the remote control through the menu. By choosing the right connection, you can use all available resources.
Have you already connected your TV to Wi-Fi? Share your experience on
If you look at the TVs that are on the market now, most of them support the Smart TV function. LG has webOS, Samsung has its own Smart system, Philips and Sony run Android TV. There are, of course, other manufacturers, but they are less popular. What I mean is that Smart TVs themselves are primarily an additional source of income for manufacturers (through the sale of additional accessories) and a good marketing move.
There are also cool features for the user. You can go online, watch videos on YouTube, read the news, watch the weather, etc. But here you still need to calculate what is more profitable: buy a TV without Smart TV and an attachment to it, or pay more for Smart functions. Since a regular Android box can make your TV more SMART than a built-in system. But today is not about that.
Of all the TVs that have Smart TV features, many models come without a built-in Wi-Fi receiver. True, in 2017 almost all models already have a built-in receiver. And if you don’t connect the Internet to the TV, then all these Smart functions on it are simply useless. Yes, all models definitely have a LAN port that allows you to connect to the Internet via cable. But you must admit, this is very inconvenient. You need to lay a network cable from the router to the TV.
And all these Smart TVs that do not have a Wi-Fi module are another insidious plan of the manufacturers. After all, you could insert this wireless module and make the TV a couple of dollars more expensive. What for? If we can then sell branded Wi-Fi adapters for $100 each :) And even now these branded Wi-Fi adapters for Samsung, LG, Philips TVs are very difficult to find. They are simply not on sale. But there are TVs, and their users want to connect to the Internet via Wi-Fi.
If you have a Smart TV without built-in Wi-Fi, and you want to connect it to the Internet via a wireless network, then there are the following options:
Let's look at the third option in more detail.
Everything is very simple. Almost all modern routers can operate in different modes: amplifier (repeater), access point, adapter, wireless bridge. I wrote about this in more detail in the article:. This scheme works something like this:
It looks something like this:
You can also use a regular adapter that has at least one LAN port. And it is available on almost all models.
What's the result: A router or repeater can be bought in almost every store. Compared to branded Wi-Fi receivers for LG, Samsung TVs, etc. And it will be cheaper this way (though it depends on which router you choose), since the price of original adapters is very high.
I wrote about setting up different operating modes on different routers in the article:. If you have a model from some other manufacturer, then you can look for setup instructions through the search on our website. Or ask in the comments.
Here is a solution for Smart TVs without built-in Wi-Fi. Without a doubt that The best decision This is the original receiver. But since they are practically not on sale and their prices are very high, you can use such a scheme. What do you think about it? Write in the comments!
Televisions from popular manufacturers Samsung and LG have undergone significant changes over the past few years in order to adapt to modern conditions. Now this is not just some kind of “box”, but an almost full-fledged home media center with a built-in mini computer based on the Android and Linux operating systems and the ability to connect to the Internet.
Access to the Internet in combination with a built-in PC provided TVs with many interesting opportunities - using various applications, watching movies online, integrating with social networks, connecting to a home network. This complex of multimedia capabilities of televisions led to the creation of a separate platform - Smart TV. To use all the features of Smart TVs, you need an Internet connection, which can be done via Wi-Fi or a wired connection via LAN. In this case, we will consider in detail the question of how to connect a TV to a WiFi network.
First of all, to connect the TV to the Internet via Wi-Fi, your home network must have a Wi-Fi router connected to the provider’s network (main router), and the TV itself must have a built-in Wi-Fi adapter. If the TV does not have a built-in Wi-Fi module, manufacturers produce external Wi-Fi adapters.
Branded Wi-Fi adapters from TV manufacturers, as a rule, are very expensive. To save a lot of money, you can buy a regular inexpensive Wi-Fi router and connect it via LAN to your TV. In this case, connecting the TV to the Internet via Wi-Fi will come down to simply setting up this router. You can do the same if the TV does not have a built-in wifi adapter
So, we assume that the TV has built-in Wi-Fi and there is a wireless router connected to the provider’s network. Before setting up a wireless Wi-Fi connection on your TV, you should check the settings of the router itself. Often the reason for an unsuccessful attempt to connect a TV via Wi-Fi is precisely the incorrect configuration of the router. No special router settings are required to connect a Smart-TV; in addition to the provider’s standard settings (login/password), it is necessary that the DHCP server is enabled in the router settings.
Let's look at setting up a network connection using the example of the LG Smart TV LA620V. If you have a TV of a different brand - Samsung, Panasonic, Philips, then you need to do everything the same way, only the interface of the TV itself will differ slightly.
First, turn on the TV and go to settings by pressing the Settings button on the remote control or TV.
After turning on the TV, press the Settings button
In the TV menu, go to the network section and select a network connection
The start page for setting up and selecting the type of TV connection to the Internet opens. Click the “configure connection” button.
On at this stage The TV displays visible and available wireless networks. We need to choose our home network from the proposed list.
If you have a password (encryption key) for the wifi network, you must enter it. Next, press the red button on the remote control, or select OK on the TV’s virtual keyboard.
After performing all the steps correctly, the TV successfully connects to the wifi network, which it happily reports on the next screen.
One of the weaknesses of connecting a TV via Wi-Fi to the Internet is possible freezes and slowdowns associated with low Wi-Fi bandwidth and weak signal levels. From my own experience, I can say that most of the time a TV connected via Wi-Fi works quite stably, without particularly noticeable slowdowns, and ultimately I’m quite happy with this.
At this method connection we will need a router with a free LAN port and the required length of UTP cable. It is also relevant to have a DHCP server enabled in the router settings. This connection is more reliable and stable in operation, but in this case you will need to lay a cable, and if the apartment has already been renovated, then this becomes problematic. There is no need to consider this connection of the TV to the Internet in more detail; just insert the cable into the router and select a wired connection in the TV menu. In this case, there is no need to specify a network password, and the TV automatically receives an IP address.
A cable connection can be useful in two cases: when your TV does not have a built-in (or external) Wi-Fi module, and when you do not have a Wi-Fi router (or there is simply no way to connect to a wireless network).
We will look at two connection methods:
In both cases there is nothing complicated.
I will show using the example of the LG 32LN575U TV.
For example, you have a router, but your TV does not have Wi-Fi. We can simply lay a network cable from the router to the TV.
Our router must be connected to the Internet and configured.
We also need a network cable. A small cable comes with the router or TV. But, if you need a longer cable, you can make it yourself, as written here, or go to some computer store and ask to crimp the cable to the required length.
We connect one end of the cable to the router, into the yellow connector (sorry for the photo quality).
On the TV, connect the second end of the cable to the network connector (RJ-45). It would be better if the TV was on.
It should look something like this:
If everything is fine, then immediately after connecting the cable a window should appear on the TV with a message stating that connection to a wired network has been established(it disappears quickly).
That's it, the Internet on the TV is already working! You can use all the functions of Smart TV.
Here almost everything is the same as in the previous method. If your provider uses connection technology “Dynamic IP” (you can check with support), then we just connect the cable to the TV and everything works.
But if technology PPPoE, then this is a little more complicated. For example, on my LG 32LN575U there is no way to configure such a connection. There is only one option, install a router and raise the connection on it. And already connect the TV with a cable or via Wi-Fi.
But, as far as I know, for example, some Samsung TVs can raise a PPPoE connection. See the characteristics, check with the manufacturer.
You may need to set a static IP and DNS when connecting via LAN (the provider can also use this technology), It can be done. I’ll show you how :)
Go to Smart TV and select the network icon (can also be done through settings).
Click the button Set up connection.
Select a button Manual setup.
The cable should already be connected!
Select a button “Wired”.
The TV will build a network map and display the result of the Internet connection. Like this (your map may be different, that’s normal):
Click Ready. All, wired network with static IP configured.
If your provider links by MAC address y, and the Internet is already connected to a computer, for example, then connecting it to the TV most likely will not work. It is necessary for the provider to change the binding to the MAC address of the TV.
In this case, we need to find out the MAC address of our TV. This can usually be done in the settings.
In LG 32LN575U tab Support – Inf. about the product/service.
That's all. If you have any questions, ask them in the comments! Best wishes!
Also on the site:
We connect the TV to the Internet via a network cable (LAN) updated: February 7, 2018 by: admin
The TV can be connected to the router in different ways
The simplest option for connecting a TV to a router is via a cable with standard RJ-45 connectors. To do this, just connect a wire of the appropriate length to the appropriate socket on the TV, as well as to the LAN connector in the router. Be careful - the cable should not be connected to the WAN port marked with a different color (most often blue), intended for access to the global network. To establish a connection to the router via wire, you need to enable DHCP support in the settings of the router and TV.
The setup is extremely simple - in the TV menu you just need to select the network connections section and activate the connection via wire. Connecting a TV via cable is always easier, since the user does not have to deal with encrypted communication channels and many settings. In addition, a cable connection is more stable than Wi-Fi because, if the wire is well shielded, it is not affected by nearby radio sources. However, connecting via a cable will require its laying through special channels or electrical skirting boards so that the wire does not interfere with the movement of people. In addition, there is also a connection option using Powerline technology, which allows you to transfer data through a regular home electrical network by connecting special adapters to two sockets located on the same line.
Owners of modern Smart TVs with built-in Wi-Fi modules can be considered lucky, since such devices are the easiest to connect to the Internet. Just go to the settings and select the “Wireless connection” option, and then select the communication channel you need. In order not to waste a lot of time trying to enter the password from the TV remote control, choose the WPS function, which allows you to connect the device with one click of a button on the router.
There is no need to purchase a special router for your TV, no matter what many major manufacturers claim. To connect your TV to the Internet, you just need to choose a quality device that complies with the N standard if you are going to do it via Wi-Fi. Setting up the router will be extremely simple - you need to set the parameters set by the provider, make sure that data distribution starts after a reboot, and then create a wireless network by setting the SSID name, the optimal encryption method and password.
If your TV does not have a built-in Wi-Fi module and you do not want to connect via cable, then you will have to look for workarounds to establish a connection. First, you need to carefully study the documentation and promotional materials for the device you are using. If they indicate Wi-Fi Ready, the situation can be corrected by installing an additional adapter, which will cost 500–2500 rubles, depending on the specific type.
The best option would be to purchase an adapter in the form of an expansion card installed in a special slot. A device that complies with the PCMCIA standard or its equivalent provides several advantages:
However, not all TVs have slots for expansion cards, so you will have to use a different method to connect them to the router via Wi-Fi.
Adapters can also be connected to the TV using USB; this option is the most common, since any modern device is equipped with one or more universal connectors. When choosing a USB adapter, you should give preference to models with a folding external antenna and a transmitter with a power of at least 16 dBm, since they provide a stable connection even at long distance. In addition, it is advisable to purchase devices that are manufactured by the same company that manufactured the TV, since only in this case their performance is guaranteed. There are many known cases where universal Wi-Fi adapters worked great for a long time, but turned off after a firmware update by a manufacturer that cares about its profits. Branded adapters are on average 50% more expensive than third-party brands.
Connecting the Internet via an additional adapter will also not be a problem, since it is enough to activate the function wireless connection in the TV system menu. In this case, you should make sure that the router uses the DHCP function and supports the same standard as the TV transmitter. In the settings you will need to specify the encryption standard, as well as select the SSID of the wireless network and enter access data.
If the TV’s documentation does not indicate readiness for wireless networks, you can connect it to the router via a special set-top box. It is a miniature TV router that connects to the main router. However, the TV itself receives all data via an RJ-45 cable, which makes this method suitable for most modern devices. The set-top box has only one drawback - like a router, it will have to be configured first by connecting it to a computer. In the TV settings, you will need to select a cable connection, despite the fact that you will actually be using a Wi-Fi network.
Surprisingly, you can connect a TV to a router even without Smart support TV. Many will ask whether there is any point in such a connection at all, and you will get the answer to the question by reading this section. You will need to purchase a compact computer running on the Android operating system or its own alternative developed by the manufacturer. Some of these devices use a cable, but most can be connected using a compact HDMI plug. The cost varies between 2.5–10 thousand rubles, which is determined by the technical content and functionality.
The compact computer that connects to the TV is equipped with a built-in Wi-Fi module. This means that it can independently connect to the router using its own settings menu. In addition, it allows you to connect tablets and smartphones to use them as remote controls and keyboards, or stream media. Its only drawback is the impossibility of simultaneously using other accessories connected to the TV, for example, flash drives or external hard drives. However, most of these computers provide the ability to install a memory card, which solves problems with additional storage devices.
Since such devices have their own operating system, they can not only access the global network and allow a person to use multimedia content online, but the user can run various applications: games, weather forecasts, information services, clients social networks and many others. In addition, most HDMI set-top boxes for TVs support Airplay, Miralink and some others, making them suitable for streaming audio and video files from smartphones and tablets, and can also communicate with other home electronics equipped with wireless modules. Also, in this case, there will be no problems with compatibility, since the manufacturer simply cannot control the type of signal transmitted through the HDMI connectors, and the next firmware will not deprive you of Wi-Fi. But it is worth remembering that budget devices of this type rarely delight the user with the same performance as a TV, so you will have to pay a considerable amount for convenience.
The easiest way to connect a TV to a global network is to connect to a router via cable; you do not need to waste time setting up the equipment, nor do you have to deal with disconnections due to strong interference. However, laying a wire is not always convenient, especially if the house has recently been renovated, and no one is going to destroy the finishing for such a purpose. Therefore, most people prefer a wireless Wi-Fi connection, and even if the TV is not equipped with a corresponding module, you can always install an additional adapter. There is no limit to ingenuity, as devices that are not compatible with wireless connections can be connected to special attachments that resemble routers. Even if the TV does not have a Smart TV, you can purchase a special set-top box with an HDMI connector, which is a miniature computer with its own operating system.
2) Via wireless Wi-Fi networks.
In this article I will describe in detail how to do this using Wi-Fi. This method requires a Wi-Fi router (more precisely, a configured Wi-Fi network) with Internet access and a TV itself that supports a Wi-Fi connection. Whether your TV supports a wireless connection, you can check the technical documentation for the TV or information on the official website of the TV. If your TV does not support a wireless network, but does support Smart TV, you can purchase a USB Wi-Fi adapter for your TV model and thus provide yourself with a wireless connection.
What does connecting a TV via Wi-Fi do?! First of all, it frees you from unnecessary work, namely pulling the LAN cable from the router, which is sometimes very difficult. But if you have low Internet speed, then Wi-Fi connection will not work for you The best way, because no matter how good your router is, in any case, during wireless transmission the Internet speed is lost and it may not be enough for comfortable work Smart TV, in which case you are better off connect the TV using a LAN cable .
In this article I will take a closer look at how to set up the Internet on your TV. LG with webOS, but a similar setting will be on other TVs - Philips, Samsung, Sony etc.
First of all, you need to go to the TV settings; to do this, if you have a regular TV remote control, click the “Settings” button.
If the path is Remote magic, click the "Input" button.
And in the TV menu, select the gear icon.
From the menu, select "Network" - "Connect to a Wi-Fi network."
A window will open in which you will see all available wireless networks and various ways to connect to them. I propose to analyze each method separately.
I suggest starting with the most popular method by entering the password for the wireless network. To do this, select the network you want to connect to.
Enter your network password and click "Connect".
As a result, you will see a check mark appear opposite your Wi-Fi network.
And in the Network menu, in the “Connect to a Wi-Fi network” field, the line “Connected to the Internet” will appear.
If your wireless network is hidden, select "Set up hidden Wi-Fi" network in the connection menu.
Enter the network name, then select a security type and enter a password if the network is password protected.
WPS(Wi-Fi Protected Setup) is a standard developed by the Wi-Fi Alliance of wireless equipment manufacturers to simplify the process of setting up and connecting to a wireless network. In particular, for this method you do not need to know the password for the Wi-Fi network, the main thing is to have physical access to the router.
To connect your TV to a wireless network using this method, select “Connect using WPS - PBC” in the TV menu.
Then no later than 2 minutes. press the WPS button on the router. In most routers, this function is enabled by default, but it is better to connect to the router’s web interface and make sure of this.
After a few seconds, your TV will connect to your Wi-Fi network.
For this method, select the appropriate item in the TV menu “Connect using WPS-PIN”.
A code will appear on the TV screen that must be entered into the router settings.
Connect to the router's web interface, find the settings related to WPS, for example, on TP-Link routers, there is a separate WPS item, select it and click the "Add device" button.
After this, enter the password specified on the TV (if the password has already been lost, repeat the action and select “Connect using WPS-PIN”, a new password will appear that is different from the first one).
After this, you should see a window indicating that the device was successfully connected.
As you may have noticed, connecting a TV to a Wi-Fi wireless network is a very simple task that even a child can handle. But sometimes there are problems connecting the TV to Wi-Fi, to fix them try the following steps:
1) Turn off and on the router and try again;
2) Reset the router settings to factory settings and configure again;
3) Update the router firmware;
4) Update the TV software via USB flash drive.
