This is an additional condition to make you feel more comfortable when contacting us. If something doesn’t suit you during or after the restoration of the bathtub, just call our dispatch center 24/7 and I will return all your money to the last penny! By the way, in 2018 we received only 9 requests for a refund (out of 38,990 requests!).
There is no need to worry about what will happen to your bathroom after the warranty. I give every client lifelong service at Lenremont. This means that if this bathtub needs restoration again after the warranty period, restoring the bathtub will cost 2 times less! So you get 25% discount on post-warranty repairs.
Yes! I am so confident in the skill of my masters that I boldly give you 1 year warranty (subject to compliance with standards) for bath restoration. This is the biggest guarantee in all of Russia.
And one more surprise - you will receive 4 months warranty on all spare parts, since Lenremont orders parts from a direct supplier.
This guarantee means that, if suddenly Your bath will need restoration again, The master will come for free and restore the bathtub. Even if the master who carried out the restoration of your bathtub gets sick or no longer works for us, you do not need to worry that you will be left without warranty service: we have more than 100 bathtub restoration masters on our staff. We take full responsibility for ensuring that you, our dear client, are satisfied.
During renovations, you want to put things in order everywhere, including the bathroom. New wall covering, beautiful ceiling, fresh plumbing... There’s just one important nuance– an old bathtub with a terrible yellowed and cracked coating, on the surface of which there may be some pretty scary black chips. Changing this element of convenience in an apartment is not as easy as it seems, and it is also an expensive pleasure. But there is a way out. A coating that has lost its appearance can be restored quite quickly and cheaply. In this case, it will be easy to cope without the help of professionals. Restoring the enamel coating of a bathroom with your own hands is quite possible and will not require huge amounts of money.
Before you know how to revive an old bathroom coating without it... complete replacement, you need to figure out why you need to restore it at all. Why isn't it easier to buy and install a new one?
A new bathroom costs a lot of money, especially a high-quality cast iron one. Of course, you can buy an ordinary metal one, but it causes some discomfort to the residents living in the apartment: filling with water is accompanied by a loud sound, which even neighbors can hear in thin-walled houses.
You still need to manage to install the new bathtub while dismantling the old one. And this is not as simple as it seems. Such work will entail a large number of garbage, and heavy one at that. At the same time, women will not be able to cope with it - in any case, strong people are needed man's hands and those who dismantle everything will endure. And probably anyone can simply apply a new enamel coating.
Fortunately, the factory enamel in the bathtub is quite durable, and some apartment owners do not even have to deal with such a procedure as restoring it. This can be achieved thanks to the special technology used for application. The bathtub blank is subjected to strong heating and only then covered protective coating, that is, enamel. In theory, it can last for centuries, but due to constant cleaning and treatment of the bathtub, this does not happen. On the contrary, the bathtub slowly but surely loses its appearance, the enamel turns yellow and becomes not smooth to the touch, but rough.
Yes, enamel is needed not only for beauty - it also protects the bathtub from the effects of various aggressive factors (for example, cleaning agents, water of different temperatures). Without enamel, the metal loses some of its qualities - for example, at the site of damage, cast iron will begin to rust, and the rust will spread further and further, destroying the product.
Attention! If damage to the enamel is not repaired in a timely manner, then rust can destroy the entire product or radically change appearance baths.
Of course, it is impossible to create factory conditions in an apartment, and it is also impossible to restore the enamel perfectly. But it can still be reapplied, which will help restore the bathtub to a beautiful and tidy appearance. And this - without unnecessary financial and physical costs.
Note! , applied at home yourself, will not last as long as the factory one, but is still capable of turning your old bath to a new one. But you need to handle it with care - it is less resistant to mechanical/chemical influences and can even change color due to contact with certain substances.
In general, the following methods now exist to restore the appearance of a bathroom.
In order to carry out restoration work, you will need certain materials and tools:
Now on construction market present big choice various enamels for baths, aimed at both professionals and home craftsmen. At the same time, if you are a beginner, it is better to purchase the simplest option - it will not require any special skills to use. Such enamels are sold both in aerosol cans and in cans (applied with a brush or small roller).
Note! It is best to use the composition that is intended for application with a brush - it covers the old coating perfectly and is easy to work with. Aerosol products are chosen when you need to restore a small chip - in this case, the enamel does not lie uniformly.
A bath restoration kit usually contains two components - a hardener and the enamel itself. There should also be a preparation that will help prepare the bathtub itself for painting. By the way, replacing enamel - great option to select a new bath color. The latter can be painted blue, red, green and other colors using special colors.
Table. Bathroom restoration kits.
| Name | Description |
|---|---|
"Reflex-50" | This set is intended for use by professionals; it is very liquid, so it will be difficult for a beginner to work with it. To cover the old coating, you will need to apply the composition several times. Restoring the bathtub will take at least a week, since each layer must be dried thoroughly. But the coverage is excellent. |
"Svetlana and Fantasia" | These are enamels of medium thickness, they are easy to apply without spreading much, which is optimal for an inexperienced restorer. Easy to apply with a brush. The kit also includes a preparation that is used to treat the surface of the bath before starting work. You can use special colors. |
"Epoksin-51" | Thick, quite viscous enamel, which is applied with a brush - the whole complexity of the work lies in the thickness. At the same time, the enamel spreads perfectly, leaving no streaks. Does not require preliminary puttying. Dries in at least 2 days. |
| A group of drugs that are not essentially enamel. They cover the surface well and are easy to apply – just pour this product over the bathtub. |
Before you start coating the bathtub with new enamel, you should definitely prepare the surface to be treated. It should become smooth and as light as possible.
Step 1. The bathtub is cleaned of rust. Special acid-based preparations will help with this. Many of them are quite effective. For example, a drug based of hydrochloric acid will remove red spots in just 10 minutes, but it will also destroy all the remaining enamel in whole pieces. It is also important to rinse this product thoroughly from the surface of the bath and be sure to follow the instructions for use. There are also more gentle preparations that deal with rust less quickly, but still effectively. Products based on oxalic acid work well, acting more accurately than drugs based on hydrochloric acid. Preparations of the latter type are washed off with water after 30-40 minutes.
Step 2. Next, you need to roughen the surface of the bathtub from the inside - for this you use either sandpaper or a grinding machine. The latter will significantly speed up the work. It is important to thoroughly clean all chips and cracks.
Step 3. After using the sander, it is necessary to wash off all dust and dirt from the surface of the bathtub. After this, the surface is degreased with acetone.
Step 4. The next stage is applying a primer, for example, GF-020. The layer of this substance should be well dried for about two days.
Advice! A reflector will help speed up the drying process. And by the way, it is not necessary to apply a primer.
Step 5. Now you should warm up the bath well - hot water is drawn into it. But you can also use construction hair dryer– in this case, there is no need to additionally dry the bath.
Now the bathtub is ready for refinishing.
We continue restoration work. Now we move on to covering the bathtub with enamel from the inside.
Step 1. The restoration kit is prepared for use in accordance with the instructions. The enamel should be well mixed until smooth.
Step 2. Using a brush, the enamel is applied in long or short strokes. Long from top to bottom and bottom to top, and then right-left or short from bottom-up-right-left. Corners and areas near drain holes are carefully painted.
Step 3. In this way, the enamel is applied several times. Each layer must be thoroughly dried in accordance with the instructions.
bath enamel
To restore the former beauty of enamel, you do not always need to resort to drastic measures and paint the entire bathtub. Sometimes it’s enough just to repair chips and scratches. It's not that difficult to do.
For example, from minor scratches A mixture of dry whitewash and BF-2 glue will help get rid of it. It is simply applied to those places where there is minor damage. In this case, it should be applied in several layers so that the latter does not protrude above the surface of the main enamel coating. It is convenient to apply the substance with a regular brush.
For deeper chips, a preparation based on nitro enamel is suitable, to which “Super Cement” is added - a special construction adhesive. The mixture is prepared in a 1:1 ratio. The resulting substance is also applied in layers, each of which is given time to dry (about 24 hours).
A mixture of zinc white and epoxy (1:2) will also help to cope with severe damage. Mix according to the rules epoxy resin, the remaining components are added to it. Zinc white can be easily replaced with porcelain shards. Such a mixture applied to the chip site will take at least 5 days to dry, but it will serve for many years.
When carrying out this work, you should make sure that the color of the enamel and the paint that will be used to restore the scratch match. Otherwise, the bath will be spotty.
And finally, some valuable and useful tips.
Attention! All chemicals, with the help of which restoration work is carried out, are poisonous and dangerous to health, so personal safety measures cannot be neglected. If the work is carried out incorrectly, there is a high risk of ending up in the hospital.
Bathtub restoration and replacement old enamel to a new one - a completely independently feasible way to return the product to its former beauty. At the same time, the new coating will serve for at least 5 years if treated with care. Of course, then you’ll have to paint the bathtub again, but considering how much cheaper it is this type work than everyone else, it's definitely worth it. By the way, an important factor influencing the long service life of enamel is chemical composition water. It is also advisable to take this into account when choosing a bath restoration method.
Restoration is a great chance to change the color of the bathtub
It’s no wonder that cast iron bathtubs are extremely popular among buyers. Even though the market is filled with acrylic and steel taxes, cast iron models not only do not go out of fashion, but are also strengthening their position. The reason for this demand is quite simple - a cast iron bathtub is durable, and at the same time it retains heat well. However, over time, the coating of a cast iron bathtub wears out and chips, stains and cracks appear on it. In such a situation, there can only be two options for solving the problem - restoring the enamel cast iron bath or buying a new one.
If we talk about purchasing, then it is worth considering a number of points that significantly affect the price of the issue, namely:
If you are not used to wasting money and time, you will certainly be interested in such a service as restoring cast iron bathtubs. Modern technologies and innovative materials allow as soon as possible return the bathtub to its radiant appearance and presentability without special expenses.
High-quality materials from Germany direct from the manufacturer
The material is non-toxic, odorless! Hardening - 20 hours
We work without prepayment, under a contract. Responsible approach
Experienced craftsmen. We have been restoring bathtubs for over 10 years
Warranty up to 5 years! Material service life 15 years
Prompt order fulfillment. Technical support
Bath 120 cm.
RUB 3,800
3,500 rub.
Bath 150 cm.
4,000 rub.
3,700 rub.
Bath 170 cm.
4,200 rub.
RUB 3,900
Restoration of cast iron bathtubs in Moscow is one of the services offered by our company. Even if your bath has completely lost original appearance, don’t rush to look for a replacement. Unique technology restoring the enamel on a cast iron bathtub will transform it, eliminating the need for an expensive purchase.
By contacting us, you can be sure that:
Call us and make sure that restoring the enamel on your bathtub is quick, simple and very profitable!
| Name of service | Price |
| Installing an acrylic baseboard on the side of a bathtub | 1300 rub. |
| Installing our screen under a bathtub on an aluminum frame (regardless of the length of the bathtub) | 2200 rub. |
| Installation of a new siphon (re-visit of the technician 24 hours after drying. New siphon, corrugations, cuffs, connection + warranty) | 1250 rub. |
| Installation acrylic liner 150 cm. | 4000 rub. |
| Installation of acrylic liner 170 cm. | 4200 rub. |
| Call a measurer for consultation and correct measurement baths | 500 rub. |
| Retaining the old piping (siphon), replacing only the drain grate with a new one | 150 rub. |
| Dismantling old cast iron trim | 400-600 rub. |
| Removing the plastic trim | For free |
| Cleaning non-factory enamel | from 400 to 800 rub. |
| Color color | 400 rub. |
| Removing chips on a bathtub | 150 rub. |
Replacing a bathtub is a very expensive and troublesome undertaking, associated with great difficulties and quite significant financial costs. That is why most of those who have started repairs (especially not major, but cosmetic) are looking for alternative ways give this sanitary ware a neat appearance again. Masters in this field certainly know how to restore an old cast-iron bathtub. But it’s quite possible to do most of the work yourself.
A cast iron bathtub is the standard of quality, strength, and reliability in the plumbing world. It’s not for nothing that they recommend installing products made from this alloy in apartments. Many houses built back in the Soviet Union had just such bathtubs installed. Moreover, such baths are still used today. Also, a cast iron product is comfortable to use: it does not create noise, unlike, for example, a thin-walled iron bathtub. And it’s nice to wash in it - the bath retains the heat of the water poured into it much longer than others.
Unfortunately, even seemingly eternal things wear out over time. And a cast iron bath is no exception. In this case, it is not the structure itself that deteriorates, but the coating – the enamel, with which the structure was coated at the factory. And this one special paint, applied using a special technology, begins to lose its appearance, and its performance characteristics are getting worse.
On a note! During production, cast iron bathtubs are coated with enamel after strong heating. It is due to this that it is possible to obtain high-quality adhesion of the base to the coating.
Signs that it's time to update your bath are listed below.
Attention! Enamel chips are dangerous for the entire structure. The fact is that enamel paint protects cast iron from exposure to water and aggressive chemicals for cleaning plumbing fixtures. Rust forms quite quickly in places where there are chips and gradually begins to spread throughout the entire structure right under the enamel.
It is these signs that inform the owner of the bath that it is time for her to “rest.” But don’t rush to dismantle it and throw it away - the bathtub can be revived! And for this there are three quite simple and also relatively inexpensive way– this is the use of an acrylic liner, the “fill-in bath” technique and renewal of the enamel.
All these methods differ from each other in price, quality, speed of work and complexity of implementation. But it’s worth considering them all to choose the one that suits you best. Each method has its own advantages and disadvantages, which are important to know in order to make the right choice.
Self-enamelling or, more simply put, painting the inside of the bathtub with special coloring compounds in order to renew the coating is one of oldest methods restoration, which has already stood the test of time.
The work is carried out using a brush and special kits for restoration, which include directly and a hardener for it; the kit can also contain tints of various colors that will allow you to change the color of the bathtub and make it as harmonious as possible in a certain color scheme interior By the way, such coloring pigments You can buy it yourself, and then simply add it to the coloring composition diluted according to all the rules.
The paint is applied to the surface of the bathtub, previously cleaned of dirt and rust. Before starting work, it is advisable to sand the walls using grinder, wash, and then degrease with any means (for example, acetone).
Important! Before the enamel is applied, the bath is well heated. This can be done using a hair dryer or by typing hot water. However, after using the second method, the surface of the structure will have to be thoroughly dried. Otherwise, the paint will not adhere as it should.
It is most convenient to work with a brush, but there are also compositions that can be perfectly applied to the surface of cast iron using a small paint roller. There are restoration compositions for enamel bathtubs and in aerosol cans, but they are not recommended for use on large areas, since the paint coming out of them often lies unevenly on the surface, so drips may remain. By the way, some compositions, especially professional ones, may have increased or decreased fluidity, which can complicate the work of a beginner. Therefore, it is worth buying non-professional kits.
Attention! All compounds used for enameling bathtubs are very toxic, and therefore it is important to work in a respirator and rubberized gloves. It should also be ensured good ventilation in the apartment and remove children and animals from the house.
It will take about a week to completely restore the bathtub using this method. The fact is that the enamel is applied in several layers, and each of them should be thoroughly dried before applying the next. TO , You can read in our article.
| Advantages | Flaws |
|---|---|
| A cheap and accessible way to restore bathtubs. | The enamel is sensitive to shock and cracks easily. Over time (and quite quickly), chips may appear. |
| You can do the work of enameling a bathtub yourself, and the products for this are sold in any hardware store. In this case, you do not need to have special skills to apply enamel. | The enamel does not cover large irregularities - they need preliminary refinement. |
| During the work, plumbing fixtures will not be dismantled. | Over time White paint will begin to turn yellow. |
| This is enough quick way bath restoration. | You need to take care of such a bathroom very carefully - do not use aggressive chemicals or abrasives for cleaning. Also, do not pour boiling water into a bathtub with such a coating. |
The average service life of enamel is about 5 years. Therefore, if this method was chosen, you should be prepared for the fact that after this period of time the enameling will have to be repeated.
bath enamel
This method of restoring bathtubs is actively used for cast iron products and is otherwise called “bath in bath.” A custom-made or purchased ready-made acrylic liner is inserted inside the old structure, which follows the contours of the plumbing structure. It is fixed inside with foam or special mastic, which is applied to the inner surface of the bathtub. In this case, it is necessary to dismantle the plumbing parts for drainage.
Advice! For high-quality adhesion of the adhesive substance to the surface of the bathtub, it is best to clean and degrease it (the surface).
The acrylic liner is solid, so first it is inserted into the bathtub without glue, holes for drainage are marked, after which they are removed and these holes are cut. Then, after applying adhesive composition on the inner surface of the bathtub itself, lower the liner there and glue it.
Table. Advantages and disadvantages of the method.
| Advantages | Flaws |
|---|---|
| Acrylic is a very durable substance; such a bathtub coating will be stronger than enamel. | The need to dismantle plumbing equipment. |
| The liner does an excellent job of hiding all the unevenness and damage to the bathtub, making it smooth and beautiful. | Cannot be installed on structures made of thin metal. Such metal can bend under the weight of water and people, which is why the adhesive adhesion of the liner to the surface is easily broken. |
| Acrylic does not turn yellow over time. | Quite a high price. |
| Easy to install. | The method high requirements to the quality of materials - bad glue or a poor-quality liner can ruin the whole job. |
The service life of the acrylic liner is approximately 15 years. However, this restoration method is much more expensive than the previous one.
This method is otherwise called “fill bath” because it is performed using a special technology using liquid acrylic. The substance is poured onto the prepared surface of the old bathtub. This is a fairly durable coating that resists daily exposure well, but still requires careful cleaning without the use of abrasives.
On a note! Due to its relative thickness and viscosity, liquid acrylic can be used to mask unevenness during bathtub restoration.
“Fluid bath” is enough new method restoration, but has already become a favorite of many, since it does not force plumbing owners to completely replace a cast-iron bathtub, but can be done easily even with their own hands.
Filling bath - before and after
The advantages of the method lie in the durability of the coating, since acrylic is applied in a fairly thick layer - about 5-6 mm. By the way, despite its thickness, it spreads well over the surface of the bath. It is also very pleasant to the touch and smooth.
How to properly restore a bathtub using this method? It's simple - follow our instructions.
Step 1. First you need to prepare the bath for work. Using a grinding machine, the old enamel coating is sanded to a rough state.
Step 2. The bathtub is cleaned with a powder and a sponge, and then rinsed with clean water.
Step 3. Drain system can be dismantled both at the top and at the bottom of the bath.
Step 4. The surface of the bathtub is degreased using any degreaser. Acetone will do, as will any other solvent. After this, liquid acrylic is prepared according to the instructions indicated on the package. The mixture must be stirred very thoroughly.
Step 5. It's time to start filling the bath. For ease of work, a little acrylic can be poured into a small container. To avoid staining the floors, the container is placed in the bathtub.
Step 6. Acrylic is poured onto the surface of the bath in a thin stream, starting from the corners and edges of the bath in a circle.
Step 7 The substance is poured in several layers. It should flow down the walls of the bath, evenly covering the sides and top.
Step 8 Using a spatula, the acrylic layer is leveled, starting from the middle of the bathtub to its bottom. All “gaps” are covered. The acrylic is lifted with a spatula from the bottom of the bath. In this way, all the side walls and bottom are worked out.
Step 9 The bath is left to dry - this period is at least 36 hours. All this time it is better not to touch it at all, otherwise you can ruin all the work.
Step 10 Lastly, when the acrylic dries, a drain system is installed.
Now you can use the product for your pleasure. The service life of a “fill-in bath” varies from 8 to 15 years.
A “fill bath” can be made using two types of media – glass acrylic and liquid acrylic. They are different from each other, and a common mistake for beginners is to mistake them for the same substance.
Stakryl began to be used about 10-15 years ago. It is relatively inexpensive and has fairly high strength. After applying it to the bath, it should be dried for at least 4 days - and already here you can see a clear difference between the substance and ordinary liquid acrylic, which has a shorter drying time. Glasscryl is also resistant to mechanical damage, so it is important to handle a bathtub covered with it with care and precision.
Liquid acrylic, on the contrary, has appeared quite recently on the construction products market. It has higher strength and resistance to various mechanical stress. The coating made from it retains a glossy shine for a long period of time. By the way, the smell from it is much less pungent than from glass. Acrylic takes only 36 hours to dry.
In general, both materials can be used for the restoration of bathtubs and other plumbing fixtures. But you should definitely know the difference between them.
Summing up the results of what has been said, we can confidently note that anyone can restore a bathtub with their own hands, restore its former grandeur and neat appearance, even without the use of drastic measures to replace the bathtub itself. But the service life of such updated products (or rather, their coating), of course, is not so long.
Acrylic bath liner - installation steps
Filling bath - before and after
It’s no wonder that cast iron bathtubs are extremely popular among buyers. Even though the market is filled with acrylic and steel taxes, cast iron models not only do not go out of fashion, but are also strengthening their position. The reason for this demand is quite simple - a cast iron bathtub is durable, and at the same time it retains heat well. However, over time, the coating of a cast iron bathtub wears out and chips, stains and cracks appear on it. In such a situation, there can only be two options for solving the problem - restoring the enamel on a cast-iron bathtub or buying a new one.
If we talk about purchasing, then it is worth considering a number of points that significantly affect the price of the issue, namely:
If you are not used to wasting money and time, you will certainly be interested in such a service as restoring cast iron bathtubs. Modern technologies and innovative materials make it possible to quickly return a bathtub to its radiant appearance and presentability without any special expenses.
High-quality materials from Germany direct from the manufacturer
The material is non-toxic, odorless! Hardening - 20 hours
We work without prepayment, under a contract. Responsible approach
Experienced craftsmen. We have been restoring bathtubs for over 10 years
Warranty up to 5 years! Material service life 15 years
Prompt order fulfillment. Technical support
Bath 120 cm.
RUB 3,800
3,500 rub.
Bath 150 cm.
4,000 rub.
3,700 rub.
Bath 170 cm.
4,200 rub.
RUB 3,900
Restoration of cast iron bathtubs in Moscow is one of the services offered by our company. Even if your bathtub has completely lost its original appearance, do not rush to look for a replacement. A unique technology for restoring enamel on a cast iron bathtub will transform it, eliminating the need for an expensive purchase.
By contacting us, you can be sure that:
Call us and make sure that restoring the enamel on your bathtub is quick, simple and very profitable!
| Name of service | Price |
| Installing an acrylic baseboard on the side of a bathtub | 1300 rub. |
| Installing our screen under a bathtub on an aluminum frame (regardless of the length of the bathtub) | 2200 rub. |
| Installation of a new siphon (re-visit of the technician 24 hours after drying. New siphon, corrugations, cuffs, connection + warranty) | 1250 rub. |
| Installation of acrylic liner 150 cm. | 4000 rub. |
| Installation of acrylic liner 170 cm. | 4200 rub. |
| Call a measurer for consultation and correct measurement of the bathtub | 500 rub. |
| Retaining the old piping (siphon), replacing only the drain grate with a new one | 150 rub. |
| Dismantling old cast iron trim | 400-600 rub. |
| Removing the plastic trim | For free |
| Cleaning non-factory enamel | from 400 to 800 rub. |
| Color color | 400 rub. |
| Removing chips on a bathtub | 150 rub. |
