Job Description. Cutting and manual cutting of wire, blanks from sheet and section metal. Sawing and deburring. Participation under the guidance of a more highly qualified fitter in the performance of certain simple and medium complexity works and operations for the assembly of metal structures and during their testing. Manufacturing simple details from varietal and sheet metal. Layout of parts according to simple patterns. Driving and cutting threads by hand with taps and dies. Alignment of racks for assembly. Installation of bolts and studs in matching holes of metal structures. Assembly of simple assemblies of metal structures for welding and riveting according to drawings and sketches using universal assembly and special devices. Tacking parts during assembly by electric welding. Drilling, reaming and reaming holes of small parts according to the marking on the machine and portable mechanized tools. Editing of details and knots of a metalwork.
Must know: name and purpose of the plumbing and measuring tools and devices and their application; refueling methods metalwork tool; techniques for performing simple and medium complexity plumbing operations and the process of assembling simple and medium complexity assemblies of metal structures; device and rules for the operation of lifting and transport devices, working and measuring instruments and devices; technological process, methods and techniques for assembling, fitting, checking and straightening metal structures; system of admissions and landings; properties, grades and assortment of materials and pipes used; methods of joining parts for welding; rules and types of marking of assembled units.
Work examples
1. Cylindrical tanks and vessels operating under pressure up to 5 MPa (60 kgf / sq. cm) - assembly and hydraulic testing.
2. Details from sheet and strip steel - marking according to the template, editing.
3. Sheet steel parts - bending.
4. Parts made of section steel of all profiles with a thickness of up to and over 6 mm - cutting, felling
5. Details are different - filing free sizes, cutting at angles, drilling according to the markup.
6. Small-sized casings - assembly.
7. Caps, lids, brushes, vessels, funnels, boxes, cabinets of all sizes - preparation, straightening and assembly of parts for welding.
8. Sheet and profile metal - drilling, cutting on guillotine and press shears, joining for welding.
9. Strip and twisted metal - bending and stripping after flame cutting.
10. Butt plates, stiffeners, temporary bolts - installation.
11. Supports and frames for devices - assembly.
12. Gaskets of simple and complex configuration made of sheet steel, cardboard, asbestos, clinogerite, rubber - cutting and cutting by hand marking.
13. Staples made of material different section- flexible in fixture.
14. Welded racks - assembly for welding.
15. Belt conveyors - assembly of metal structures.
16. Pipe fittings with flanges - assembly.
17. Metal cabinets and shelves - assembly.
Job Description. Assembly of metal structures of medium complexity for welding and riveting according to drawings and sketches using universal fixtures, as well as assembly of complex metal structures using universal assembly and special fixtures and templates. Adjustment of sealing surfaces. Marking places for the installation of simple basic parts and assemblies of metal structures. Assembly of complex metal structures together with a locksmith and an electric welder of higher qualification. Editing parts and assemblies of metal structures of medium complexity. Hydraulic and pneumatic testing of metal structures of medium complexity, working under pressure.
Must know: methods of marking places for the installation of basic parts and assemblies of metal structures; constructive arrangement of devices used in assembly; methods of sharpening metalwork tools; state standards for the materials used; a system of tolerances, landings and their designation on the drawings; requirements for the work performed; rules for working with a gas cutter and an electric welding machine; the sequence and methods of assembly on assembly racks and on copier conductors; range and steel grades.
Work examples
1. Apparatus low pressure with detachable connections - assembly.
2. Oil tanks - manufacturing and assembly.
3. Cylindrical tanks and other vessels operating under pressure over 5 to 15 MPa (50 to 150 kgf / sq. cm) - assembly and hydraulic testing.
4. I-beams for monorails - assembly.
5. Baths of rolling equipment and oil reducers, pouring ladles of various capacities - assembly for welding.
6. Collector insulation - manufacturing and assembly of parts.
7. Lamellar and suspended conveyors - assembly of metal structures.
8. Door and window frames and metal doors with a rigid frame - assembly.
9. Cases of counterweights - assembly for welding.
10. Stairs, platforms, girders, walls of bunkers, floorings, metal railings made of pipes and tees, brake sheets, fences, sliding supports, gratings - assembly.
11. Cylindrical and conical shells made of sheet metal - bending.
12. Settlers, measuring tanks, collections - assembly.
13. Foundation slabs - assembly.
14. Louvre grilles, decking for openings, bar racks for fastening conductors, conductor for anchor bolts - assembly.
15. I-section bars - assembly of metal structures.
16. Farms - assembly on a copier.
Job Description. Assembly of complex units of metal structures for welding and riveting according to drawings and assembly diagrams using universal fixtures, as well as assembly of complex units of metal structures using universal assembly and special fixtures and templates. Marking places for the installation of complex basic parts and assemblies of metal structures. Editing complex and complex parts and assemblies of metal structures. Cleaning for gumming welds manual pneumatic grinder. Participation in the assembly of experimental and unique units of metal structures under the guidance of a more highly qualified locksmith. Hydraulic and pneumatic testing of complex components of metal structures operating under pressure. Elimination of defects found after testing complex assemblies of metal structures. Drawing up sketches and assembly schemes. Assembly, lifting and installation with a temporary distribution of metal structures in various positions at various heights.
Must know: specifications for the assembly of complex metal structures; system of admissions and landings; quality and roughness parameters; the effect of heating metals (during welding) on their deformation; conventions welded seams; ways to reconcile complex steel structures; installation rules and device lifting mechanisms and fixtures; methods for straightening complex metal structures in fixtures using templates and according to drawings; device and rules for setting up manual pneumatic machines.
Work examples
1. A-shaped excavator farms - assembly of individual units.
2. Cylindrical tanks and other vessels operating under pressure over 15 to 30 MPa (150 to 300 kgf / sq. cm) - assembly and hydrotesting.
3. Tanks of tee, box-shaped and lattice section for load-bearing metal structures - assembly.
4. Mixer bandages - assembly.
5. Mixing drums with internal spirals - assembly.
6. Shafts of cellular disc vacuum filters made of high-alloy steel - assembly.
7. Auger screws - assembly.
8. Drilling rigs - assembly separate parts metal structures.
9. Gas holders, air collectors and water separators - assembly.
10. Gas pipelines - assembly.
11. Turbine casing frames - assembly.
12. Frames and casings industrial furnaces and dried - assembly.
13. Protective covers - assembly, installation.
14. Structures of load-bearing bridges of pipelines - assembly.
15. Conductor, copiers for farms - assembly.
16. Cases of evaporators and condensers - assembly with spherical bottoms and fittings for welding.
17. Cranes with a lifting capacity of up to 100 tons - assembly of structures and individual units.
18. Monorails - assembly.
19. Lattice supports - assembly.
20. Overall welded tanks - assembly.
21. Ties and spacers - assembly.
22. Sections of nozzles of dryer drums - assembly.
23. Traverses - assembly for welding.
24. Half-timbered houses - assembly of girders and elements.
25. Refrigerators and tilters blast furnaces- manufacturing and assembly.
26. Cabinets and drawers (waterproof) - assembly.
27. Electric blowers and turbo blowers - assembly.
28. Elements of radio towers, power line supports - assembly.
29. Elevators, smoke exhausters, exhausters - assembly.
Job Description. Assembly of complex units of metal structures for welding and riveting according to drawings and assembly schemes using universal and special fixtures and templates. Marking places for the installation of complex basic parts and assemblies of metal structures. Leveling and alignment of assembled metal structures. Construction of simple geometric shapes assembly drawings and sketches. Assembly of experimental and unique units of metal structures. Hydraulic and pneumatic testing of complex components of metal structures operating under pressure. Elimination of defects found after testing complex assemblies of metal structures.
Must know: the appointment of various kinds of complex metal structures; operating conditions of lifting and transport devices, methods for determining their reliability; mechanical properties base metals; allowable tensile, bending, compression forces; mechanical characteristics of the lifting mechanisms used; methods of performing rigging and welding work; the procedure for organizing work on the assembly of complex metal structures; ways to mark up complex sweeps.
Work examples
1. Excavator base - assembly.
2. Water tanks, gas ducts, bunkers and chimneys - assembly.
3. Cylindrical tanks and other vessels operating under pressure over 30 MPa (300 kgf / sq. cm) - assembly and hydrotesting.
4. Main and end beams of overhead cranes - assembly.
5. Drums: coal grinding, ore grinding mills, mine machines - assembly.
6. Towers and frames of scoop dredgers - manufacturing of details.
7. Car dumpers - assembly.
8. Sluice gates - assembly.
9. Thin-walled telescopic casings made of special steels - assembly.
10. Metal structures (trusses, columns, rafters, blocks, casings) - assembly, verification of all structures.
11. Bridge structures - assembly.
12. Building structures - control and enlarged assembly, reconciliation.
13. Containers with a carrying capacity of more than 0.5 tons and organizational equipment with mechanical, telescopic and other drives for moving or lifting loads - manufacturing, assembly, adjustment and testing.
14. Mine pile drivers - production of details.
15. Cases of heat exchangers - assembly.
16. Cases of cement, metallurgical and other furnaces of complex structures - verification of the complete assembly.
17. Cases of electrostatic precipitators - assembly.
18. Cranes with a lifting capacity of over 100 tons - assembly of structures and individual units.
19. Mechanisms for turning excavators, reloaders, portal cranes - control assembly.
20. Nozzle of dryers - installation in the case.
21. Models of simulators intended for training workers (crane and lift operators) - manufacturing, assembly, adjustment and testing.
22. Technological tooling designed for the manufacture, assembly and testing of prototypes - manufacturing.
23. Furnaces for heat treatment - production of parts and installation.
24. Open-hearth furnaces - assembly of metal structures.
25. Automatic filter press plates - assembly.
26. High pressure heaters - assembly.
27. Reactors, autoclaves, multi-chamber tunnel dryers - assembly.
28. Reservoirs under high pressure- assembly.
29. Sections of the elevator housing - assembly.
30. Shells and suction dredgers with a capacity of up to 300 cubic meters. m/h - assembly.
31. Compound shelving, chairs and armchairs with movement in three planes - manufacturing, assembly, testing.
32. A-shaped excavator farms - general assembly.
33. Automatic filter presses - general installation.
34. Tanks - assembly.
35. High power walking excavators - assembly.
Job Description. Assembly, adjustment, testing and delivery in accordance with the technical specifications of complex metal structures, as well as experimental and unique components of metal structures that require increased accuracy of assembly work. Construction of complex geometric shapes according to assembly schemes and sketches. Participation in the preparation of a passport for the assembled units of metal structures. Hydraulic and pneumatic testing of experimental and unique units of metal structures operating under pressure. Checking the correct assembly of metal structure nodes of varying complexity with the removal of operational diagrams and characteristics.
Must know: fundamentals of heat engineering, mechanics, geometry and trigonometry; the principle of operation and rules for the operation of complex metal structures; equipment, complex tools, fixtures and various devices used in the assembly of metal structures; the sequence of assembly of metal structures; requirements for the assembly of structures and products subject to special tests; technology and specifications for the assembly of metal structures.
Work examples
1. Autoclaves, recuperators, muffleless, tempering and quenching units - production of units and installation.
2. Heat exchangers complex design- production of pipe systems, general assembly, installation and testing.
3. Casings of blast furnaces, domes of air heaters, inclined bridges of blast furnaces - control and enlarged assembly.
4. Supports of heavy power lines - control and enlarged assembly.
5. Supports of tubular structures (telemasts, radio masts) - assembly.
6. Shells and suction dredgers with a capacity of more than 300 cubic meters. m/h - assembly.
7. Annular air ducts, tangential inlets, elliptical branch pipes - assembly.
This job description has been developed and approved in accordance with the provisions Labor Code Russian Federation, Unified Tariff and Qualification Handbook of Works and Professions of Workers, Issue 2, Sections: “Foundry Works”, “Welding Works”, “Boiler Rooms, Cold Forging, Drawing and Spinning Works”, “Forging and Pressing and Thermal Works”, “ Mechanical restoration metals and other materials”, “Metal plating and painting”, “Enameling”, “Locksmith and metalwork and assembly works”, part 2, sections: “Machining of metals and other materials”, “Metal plating and painting”, “Enameling”, “ Locksmith and locksmith-assembly work”, approved by the Decree of the Ministry of Labor of the Russian Federation of November 15, 1999 N 45; List of industries, workshops, professions and positions with harmful conditions labor, work in which gives the right to additional leave and a shorter working day, approved by the Decree of the USSR State Committee for Labor and the Presidium of the All-Union Central Council of Trade Unions of October 25, 1974 N 298 / P-22; Order of the Ministry of Health and social development RF dated 03.10.2008 N 543n “On Approval of the Model Norms for the Free Issue of Certified Special Clothing, Special Footwear and Other Personal Protective Equipment to Housing and Communal Services Workers Employed at Work with Harmful and (or) Dangerous Working Conditions, as well as at Work performed under special temperature conditions or associated with pollution”; Order of the Ministry of Health and Social Development of the Russian Federation of December 14, 2010 N 1104n “On Approval of the Model Norms for the Free Issue of Special Clothing, Special Footwear and Other Personal Protective Equipment to Employees of Machine-Building and Metalworking Industries Employed in Works with Harmful and (or) Dangerous Working Conditions , as well as at work performed in special temperature conditions or associated with pollution, ”and other regulatory legal acts regulating labor relations.
1.1. A metalwork assembly fitter of the 4th category belongs to the category of workers and directly reports to [name of the position of the immediate supervisor].
1.2. A person with a secondary vocational education and work experience in the specialty of at least [value] years is accepted for the position of a metalworker for the assembly of metal structures of the 4th category.
1.3. A steel structure assembly fitter of the 4th category is appointed to the position and dismissed from it by order of [name of the position of the head].
1.4. A steel structure assembly fitter of the 4th category must know:
- the name and purpose of metalwork and measuring tools and devices and their use;
— ways of refueling metalwork tools;
— techniques for performing simple and medium complexity plumbing operations and the process of assembling simple and medium complexity assemblies of metal structures;
- devices and rules for the operation of lifting and transport devices, working and measuring instruments and devices;
- technological process, methods and techniques of assembly, fitting, checking and editing of metal structures;
- a system of tolerances, landings and their designation on the drawings;
- properties, grades and assortment of materials and pipes used;
- methods of joining parts for welding;
- rules and types of marking of assembled units;
– methods of marking places for the installation of basic parts and assemblies of metal structures;
- constructive arrangement of devices used in assembly;
- methods of sharpening metalwork tools;
— state standards on the materials used;
- requirements for the work performed;
- rules for working with a gas cutter and an electric welding machine;
- the sequence and methods of assembly on assembly racks and on copier conductors;
— assortment and grades of steels;
— technical conditions for the assembly of complex metal structures;
— grades and parameters of roughness;
- the effect of heating metals (during welding) on their deformation;
- symbols for welds;
- methods of alignment of complex steel structures;
- installation rules and arrangement of lifting mechanisms and devices;
– methods of straightening complex metal structures in fixtures using templates and according to drawings;
- device and rules for setting up manual pneumatic machines;
— basics of labor legislation;
- internal labor regulations;
- rules of sanitary and personal hygiene;
— rules and regulations of labor protection, safety and fire protection;
- rules for the use of personal protective equipment;
— requirements for the quality of work (services) performed;
- requirements for the rational organization of labor in the workplace;
- types of marriage and ways to prevent and eliminate it;
- production signaling.
The locksmith for the assembly of metal structures of the 4th category is entrusted with the following official duties:
2.1. Cutting and manual cutting of wire, blanks from sheet and section metal.
2.2. Sawing and deburring.
2.3. Assembly of complex metal structures together with a locksmith and an electric welder of higher qualification.
2.4. Manufacture of simple parts from bar and sheet metal.
2.5. Marking parts on simple templates.
2.6. Driving and cutting threads by hand with taps and dies.
2.7. Alignment of racks for assembly.
2.8. Installation of bolts and studs in matching holes of metal structures.
2.9. Assembly of simple assemblies of metal structures for welding and riveting according to drawings and sketches using universal assembly and special devices.
2.10. Tacking parts during assembly by electric welding.
2.11. Drilling, reaming and reaming holes of small parts according to the marking on the machine and portable mechanized tools.
2.12. Editing of parts and assemblies of metal structures, regardless of complexity.
2.13. Assembly of metal structure units, regardless of complexity, for welding and riveting according to drawings, sketches and assembly diagrams using universal fixtures, as well as assembly of complex metal structure units using universal assembly and special fixtures and templates.
2.14. Adjustment of sealing surfaces.
2.15. Marking places for the installation of basic parts, regardless of the complexity and nodes of metal structures.
2.16. Hydraulic and pneumatic testing of metal structures, regardless of complexity, working under pressure.
2.17. Cleaning for gumming welds with a manual pneumatic grinder.
2.18. Participation in the assembly of experimental and unique units of metal structures under the guidance of a more highly qualified locksmith.
2.19. Elimination of defects found after testing complex assemblies of metal structures.
2.20. Drawing up sketches and assembly schemes.
2.21. Assembly, lifting and installation with a temporary distribution of metal structures in various positions at various heights.
2.22. Management of workers of lower ranks of the same profession.
2.23. Performing work on the acceptance and delivery of shifts, cleaning the workplace, fixtures, tools, as well as maintaining them in proper condition, maintaining the established technical documentation.
2.24. [Other Job Responsibilities].
Locksmith for the assembly of metal structures of the 4th category performs the following types works:
3.1. Cylindrical tanks and vessels operating under pressure up to 30 MPa (up to 300 kgf / sq. cm) - assembly and hydraulic testing.
3.2. Details from sheet and strip steel - marking according to the template, editing.
3.3. Sheet steel parts - bending.
3.4. Parts made of section steel of all profiles with a thickness of up to and over 6 mm - cutting, felling.
3.5. The details are different - filing free sizes, cutting at angles, drilling according to the markup.
3.6. Small-sized casings - assembly.
3.7. Caps, lids, brushes, vessels, funnels, boxes, cabinets of all sizes - preparation, straightening and assembly of parts for welding.
3.8. Sheet and profile metal - drilling, cutting on guillotine and press shears, docking for welding.
3.9. Strip and twisted metal - bending and stripping after flame cutting.
3.10. Butt plates, stiffeners, temporary bolts - installation.
3.11. Supports and frames for devices - assembly.
3.12. Gaskets of simple and complex configurations made of sheet steel, cardboard, asbestos, clinogerite, rubber - cutting and cutting out by hand marking.
3.13. Staples made of material of different sections - bending in the fixture.
3.14. Welded racks - assembly for welding.
3.15. Belt conveyors - assembly of metal structures.
3.16. Pipe fittings with flanges - assembly.
3.17. Metal cabinets and shelves - assembly.
3.18. Low-pressure apparatus with detachable connections - assembly.
3.19. Oil tanks - manufacturing and assembly.
3.20. I-beams for monorails - assembly.
3.21. Baths of rolling equipment and oil reducers, pouring ladles of various capacities - assembly for welding.
3.22. Collector insulation - manufacturing and assembly of parts.
3.23. Lamellar and suspended conveyors - assembly of metal structures.
3.24. Door and window frames and metal doors with a rigid frame - assembly.
3.25. Counterweight housings - assembly for welding.
3.26. Stairs, platforms, girders, walls of bunkers, decking, metal railings from pipes and tees, brake sheets, fences, sliding supports, gratings - assembly.
3.27. Cylindrical and conical shells made of sheet metal - bending.
3.28. Settlers, measuring tanks, collections - assembly.
3.29. Foundation slabs - assembly.
3.30. Louvre grilles, flooring for openings, bar racks for fastening conductors, conductor for anchor bolts - assembly.
3.31. I-section bars - assembly of metal structures.
3.32. Farms - assembly on a copier.
3.33. A-shaped excavator farms - assembly of individual units.
3.34. Tanks of tee, box-shaped and lattice section for load-bearing metal structures - assembly.
3.35. Mixer bandages - assembly.
3.36. Mixing drums with internal spirals - assembly.
3.37. Shafts of cellular disc vacuum filters made of high-alloy steel - assembly.
3.38. Auger screws - assembly.
3.39. Drilling towers - assembly of individual parts of metal structures.
3.40. Gas holders, air collectors and water separators - assembly.
3.41. Gas pipelines - assembly.
3.42. Turbine casing frames - assembly.
3.43. Frames and casings of industrial furnaces and dryers - assembly.
3.44. Protective covers - assembly, installation.
3.45. Structures of load-bearing bridges of pipelines - assembly.
3.46. Conductor, copiers for farms - assembly.
3.47. Bodies of evaporators and condensates - assembly with spherical bottoms and fittings for welding.
3.48. Cranes with a lifting capacity of up to 100 tons - assembly of structures and individual units.
3.49. Monorails - assembly.
3.50. Lattice supports - assembly.
3.51. Overall welded tanks - assembly.
3.52. Ties and spacers - assembly.
3.53. Tumble Dryer Nozzle Sections - Assembly.
3.54. Traverses - assembly for welding.
3.55. Half-timbered houses - an assembly of girders and elements.
3.56. Refrigerators and inclined machines for blast furnaces - manufacturing and assembly.
3.57. Cabinets and Drawers (Waterproof) - Assembly.
3.58. Electric blowers and turbo blowers - assembly.
3.59. Elements of radio towers, power line supports - assembly.
3.60. Elevators, smoke exhausters, exhausters - assembly.
Metalworker of the 4th category has the right to:
4.1. For all social guarantees provided for by the legislation of the Russian Federation.
4.2. For extra leave.
4.3. For the free issue of special clothing, special footwear and other personal protective equipment.
4.4. Payment of additional expenses for medical, social and professional rehabilitation in cases of damage to health due to an accident at work and occupational disease.
4.5. Require the creation of conditions for the performance of professional duties, including the provision of necessary equipment, inventory, workplace that meets sanitary and hygienic rules and regulations, etc.
4.6. Require the management of the enterprise to provide assistance in the performance of their professional duties and the exercise of rights.
4.7. Get acquainted with the draft decisions of the management of the enterprise relating to its activities.
4.8. Improve your professional qualifications.
4.9. Other rights provided for by the labor legislation of the Russian Federation.
The locksmith for the assembly of metal structures of the 4th category is responsible for:
5.1. For non-fulfillment, improper fulfillment of the duties provided for by this instruction - within the limits determined by the labor legislation of the Russian Federation.
5.2. For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation.
5.3. For causing material damage to the employer - within the limits determined by the current labor and civil legislation of the Russian Federation.
Job description for a locksmith for the assembly of metal structures of the 4th category
APPROVE:
[Job title]
_______________________________
_______________________________
[Name of company]
_______________________________
_______________________/[FULL NAME.]/
"______" _______________ 20___
JOB DESCRIPTION
Locksmith for the assembly of metal structures of the 4th category
1. General Provisions
1.1. This job description defines and regulates the powers, functional and job responsibilities, rights and responsibilities of a steel structure assembly fitter of the 4th category [Name of organization in genitive case] (hereinafter referred to as the Company).
1.2. A steel structure assembly fitter of the 4th category is appointed to the position and dismissed in accordance with the procedure established by the current labor legislation by order of the head of the Company.
1.3. The metalwork assembly fitter of the 4th category belongs to the category of workers and reports directly to [name of the position of the immediate supervisor in dative case] Companies.
1.4. The 4th category steel structure assembly fitter is responsible for:
1.5. A person with an average special education in this specialty and work experience of at least 1 year.
1.6. In practice, a metalworker of the 4th category should be guided by:
1.7. A steel structure assembly fitter of the 4th category must know:
1.8. During the period of temporary absence of a steel structure assembly fitter of the 4th category, his duties are assigned to [deputy position].
2. Functional responsibilities
The metalwork assembly fitter of the 4th category performs the following labor functions:
2.1. Assembly of complex units of metal structures for welding and riveting according to drawings and assembly diagrams using universal fixtures, as well as assembly of complex units of metal structures using universal assembly and special fixtures and templates.
2.2. Marking places for the installation of complex basic parts and assemblies of metal structures.
2.3. Editing complex and complex parts and assemblies of metal structures.
2.4. Cleaning for gumming welds with a manual pneumatic grinder.
2.5. Participation in the assembly of experimental and unique units of metal structures under the guidance of a more highly qualified locksmith.
2.6. Hydraulic and pneumatic testing of complex components of metal structures operating under pressure.
2.7. Elimination of defects found after testing complex assemblies of metal structures.
2.8. Drawing up sketches and assembly schemes.
2.9. Assembly, lifting and installation with a temporary distribution of metal structures in various positions at various heights.
In case of official necessity, a steel structure assembly fitter of the 4th category may be involved in the performance of his official duties overtime, in the manner prescribed by law.
3. Rights
Metalworker of the 4th category has the right to:
3.1. Get acquainted with the draft decisions of the management of the enterprise relating to its activities.
3.2. Submit proposals for the management to improve the work related to the responsibilities provided for in this job description.
3.3. Report to the immediate supervisor about all the shortcomings in the production activities of the enterprise (its structural divisions) identified in the course of the performance of their duties and make proposals for their elimination.
3.4. Request personally or on behalf of the immediate supervisor from the heads of enterprise departments and specialists information and documents necessary for the performance of their duties.
3.5. Involve specialists from all (separate) structural divisions of the Company in solving the tasks assigned to him (if it is provided for by the regulations on structural divisions, if not, with the permission of the head of the Company).
3.6. Require the management of the enterprise to assist in the performance of their duties and rights.
4. Responsibility and performance evaluation
4.1. A steel structure assembly fitter of the 4th category bears administrative, disciplinary and material (and in some cases provided for by the legislation of the Russian Federation - and criminal) responsibility for:
4.1.1. Non-fulfillment or improper fulfillment of official instructions of the immediate supervisor.
4.1.2. Failure to perform or improper performance of their labor functions and assigned tasks.
4.1.3. Unlawful use of the granted official powers, as well as their use for personal purposes.
4.1.4. Inaccurate information about the status of the work entrusted to him.
4.1.5. Failure to take measures to suppress the identified violations of safety regulations, fire and other rules that pose a threat to the activities of the enterprise and its employees.
4.1.6. Failure to enforce labor discipline.
4.2. The assessment of the work of a locksmith for the assembly of metal structures of the 4th category is carried out:
4.2.1. Direct supervisor - regularly, in the course of the daily implementation by the employee of his labor functions.
4.2.2. Attestation Commission of the enterprise - periodically, but at least once every two years based on the documented results of the work for the evaluation period.
4.3. The main criterion for evaluating the work of a locksmith for the assembly of metal structures of the 4th category is the quality, completeness and timeliness of his performance of the tasks provided for in this instruction.
5. Working conditions
5.1. The work schedule of a 4th category metalworker is determined in accordance with the internal labor regulations established by the Company.
5.2. In connection with production necessity a steel structure assembly fitter of the 4th category is obliged to go on business trips (including local ones).
Acquainted with the instruction ___________ / ____________ / "____" _______ 20__
\Typical job description of a Metalworker of the 4th category
Job title: Fitter for the assembly of metal structures of the 4th category
Subdivision: _________________________
1. General Provisions:
Substitution:
Recruitment and dismissal:
The locksmith for the assembly of metal structures is appointed to the position and dismissed by the head of the department in agreement with the head of the department.
4. Rights
Head of structural
This job description has been translated automatically. Please note that automatic translation does not provide 100% accuracy, so there may be minor translation errors in the text.
| Instructions for the position " Assembly fitter metal structures 4th category", presented on the website, complies with the requirements of the document - "DIRECTORY of qualification characteristics of workers' professions. 42 issue. Metal processing. Part 1. Managers, professionals, specialists, technical employees. Part 2. Workers. Book 1. "Metal casting", "Metal welding". Book 2. "Drawing, squeezing, cold stamping of metal. Production of heating boilers, metal tanks and similar products"," Forging, high- and low-temperature processing of metal. "Book 3. "Turning, drilling, milling and other types of processing of metals and materials", "Coating of metals with metals. Coloring". Book 4. "Coating of metals with non-metals: enameling and other types of coating", "Locksmith and assembly work in the production of machines"", which was approved by order of the Ministry of Industrial Policy of Ukraine on March 22, 2007 N 120. Agreed by the Ministry of Labor and Social Policy of Ukraine. Entered into force in April 2007 The status of the document is "valid". |
|
0.1. The document comes into force from the moment of its approval.
0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
0.3. Document approved: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
0.4. Periodic verification of this document is carried out at intervals not exceeding 3 years.
1.1. The position "Mechanic for the assembly of metal structures of the 4th category" belongs to the category "Workers".
1.2. Qualifications- vocational education. Advanced training and work experience in the profession of a locksmith for the assembly of metal structures of the 3rd category - at least 1 year.
1.3. Knows and applies:
- technical conditions for the preparation of complex metal structures;
- a system of tolerances and fits, qualifications and roughness parameters (classes of accuracy and cleanliness of processing);
- influence of heating of metals (during welding) on their deformation;
- symbols of welds;
- methods of alignment of complex steel structures, the rules for establishing and the structure of lifting mechanisms and devices;
- methods of straightening complex metal structures in devices using templates and according to drawings;
- device and rules for setting up manual pneumatic machines.
1.4. A locksmith for the assembly of metal structures of the 4th category is appointed to the position and dismissed from the position by order of the organization (enterprise / institution).
1.5. The locksmith for the assembly of metal structures of the 4th category reports directly to _ _ _ _ _ _ _ _ _ _ .
1.6. The locksmith for the assembly of metal structures of the 4th category directs the work of _ _ _ _ _ _ _ _ _ _ .
1.7. The fitter for the assembly of metal structures of the 4th category during the absence, is replaced by a person appointed in in due course which acquires the relevant rights and is responsible for the proper performance of the duties assigned to it.
2.1. Compiles complex assemblies of metal structures for welding and riveting according to assembly drawings and diagrams using universal devices, and also composes especially complex units of metal structures using universal assembly and special devices and templates.
2.2. Marks out places for the installation of complex basic parts and assemblies of metal structures.
2.3. Corrects complex and especially complex parts and assemblies of metal structures.
2.4. Cleans welded seams for gumming with a manual pneumatic grinder.
2.5. Takes part in the compilation of experimental and unique units of metal structures under the guidance of a locksmith of the highest qualification.
2.6. Performs hydraulic and pneumatic tests of complex metal structures working under pressure.
2.7. Eliminates defects identified after testing complex assemblies of metal structures.
2.8. Makes sketches and assembly diagrams.
2.9. Composes, lifts and installs with temporary fastening elements of a metal structure in different positions at different heights.
2.10. Knows, understands and applies the current regulatory documents relating to its activities.
2.11. Knows and complies with the requirements of normative acts on labor protection and environment, complies with the norms, methods and techniques for the safe performance of work.
3.1. The metalworker of the 4th category has the right to take actions to prevent and eliminate the occurrence of any violations or inconsistencies.
3.2. A locksmith for the assembly of metal structures of the 4th category has the right to receive all social guarantees provided for by law.
3.3. A locksmith for the assembly of metal structures of the 4th category has the right to demand assistance in the performance of his duties and the exercise of rights.
3.4. A locksmith for the assembly of metal structures of the 4th category has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision of the necessary equipment and inventory.
3.5. A locksmith for the assembly of metal structures of the 4th category has the right to get acquainted with the draft documents relating to his activities.
3.6. Metalworker of the 4th category has the right to request and receive documents, materials and information necessary for the performance of his duties and instructions of the management.
3.7. A locksmith for the assembly of metal structures of the 4th category has the right to improve his professional qualifications.
3.8. The metalworker of the 4th category has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.
3.9. A locksmith for the assembly of metal structures of the 4th category has the right to get acquainted with the documents defining the rights and obligations of the position held, the criteria for assessing the quality of the performance of official duties.
4.1. The locksmith for the assembly of metal structures of the 4th category is responsible for non-fulfillment or untimely fulfillment of the duties assigned by this job description and (or) non-use of the rights granted.
4.2. A metalworker of the 4th category is responsible for non-compliance with the rules of internal labor regulations, labor protection, safety, industrial sanitation and fire protection.
4.3. Metalworker of the 4th category is responsible for disclosing information about the organization (enterprise/institution) that is a trade secret.
4.4. The locksmith for the assembly of metal structures of the 4th category is responsible for non-fulfillment or improper fulfillment of the requirements of internal normative documents organizations (enterprises/institutions) and legal orders of management.
4.5. A locksmith for the assembly of metal structures of the 4th category is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.
4.6. Metalworker of the 4th category is responsible for causing material damage to the organization (enterprise / institution) within the limits established by the current administrative, criminal and civil legislation.
4.7. Metalworker of the 4th category is responsible for the misuse of the granted official powers, as well as their use for personal purposes.
5.1. A-like excavator farms - compilation of individual nodes.
5.2. Tanks of tee, box-shaped and lattice section for load-bearing metal structures - compilation.
5.3. Cylindrical tanks and other vessels operating under pressure over 15 to 30 MPa (150 to 300 kgf/sq.cm) - drafting and hydrotesting.
5.4. Mixer Bandages - Drafting.
5.5. Mixing drums with internal spirals - compilation.
5.6. Shafts of cellular disc vacuum filters made of high-alloy steel - compilation.
5.7. Drilling derricks - compilation of separate parts of a metal structure.
5.8. Gas tanks, air collectors and water tanks - compilation.
5.9. Gas pipelines - compilation.
5.10. Auger screws - compilation.
5.11. Ties and spacers - drafting.
5.12. Electric blowers and turbo blowers - compilation.
5.13. Elements for radio towers, power line supports - compilation.
5.14. Elevators, smoke exhausters, exhausters - compilation.
5.15. Frameworks and casings of industrial furnaces and dryers - compilation.
5.16. Turbine casing frames - compilation.
5.17. Protective Covers- assembly, installation.
5.18. Structures of load-bearing bridges of pipelines - compilation.
5.19. Conductors, truss copiers - compilation.
5.20. Evaporator and condenser casings - composition with spherical bottoms and fittings for welding.
5.21. Cranes with a lifting capacity of up to 100 tons - assembly of structures and individual units.
5.22. Monorail - composing.
5.23. Lattice supports - compilation.
5.24. Welded overall tanks - compilation.
5.25. Sections of nozzles of dryer drums - compilation.
5.26. Traverses - assemblies for welding.
5.27. Half-timbered houses - drawing up runs and elements.
5.28. Refrigerators and inclined machines for blast furnaces - manufacturing and assembly.
5.29. Cabinets and drawers (waterproof) - compilation.
