Unified Tariff and Qualification Directory of Works and Professions of Workers (UTKS), 2019
Issue No. 6 ETKS
The release was approved by the Decree of the Ministry of Labor and social development Russian Federation dated 14.11.2000 N 81
Characteristics of work. Installation, dismantling and transportation of drilling rig blocks, boiler units, water pumping units, fuel oil units, electric drilling equipment, metal transition platforms, ladders, ladders and fences on power, pumping, energy, derrick and winch units and drilling fluid cleaning systems. Device concrete covering under the drilling rig, bases and platforms for spare tanks and clay mixers, fences for moving parts of mechanisms. Performing excavation, concrete, plumbing, carpentry and loading and unloading work during the assembly and disassembly of towers and overhead structures. Installation of anchors for securing and centering the tower. Layout of locations for foundations of drilling equipment and off-site structures under the guidance of a more highly qualified derrick operator. Laying and piping of steam and water lines. Drilling lubrication and technological equipment. Preparation auxiliary equipment for transportation. Assembly, movement and disassembly of drilling rigs for geological exploration drilling with towers of all types and designs.
Must know: purpose of drilling rigs, used mechanisms and equipment; purpose of tower parts and structural units of foundations, foundations and superstructures; dimensions of constructed fences for barns and work sites; methods of installation, dismantling and transportation of drilling rigs; layout of drilling equipment and communications; technical characteristics of mechanisms used in tower construction; placement of instrumentation; rules for using metalwork and carpentry tools; rules for slinging, lifting and moving small cargo; conditional alarm for crane operators.
Characteristics of work. Installation, dismantling and transportation of drilling rigs, overhead structures, mechanisms for raising and lowering derricks, equipment circulation system cleaning of drilling fluid, block of spare tanks, power unit and means of mechanization and automation. Breakdown of the locations of foundations for drilling equipment and subsurface foundations. Laying and piping of exhaust manifolds for diesel engines, participation in the assembly and crimping of injection lines and manifolds under the guidance of a more highly qualified rigger. Alignment of the drilling rig, drilling, power equipment and individual blocks of the drilling rig. Leading a derrick crew in assembling, moving and disassembling drilling rigs for geological exploration drilling with towers of all types and designs used in geological exploration equipment.
Must know: methods and rules for installation, dismantling and transportation of drilling rigs; design of a mechanization and automation complex; purpose and technical characteristics a set of mechanisms for lowering and lifting operations, circulation system mechanisms, steam and water supply communications, electrical supply, pneumatic systems and heating of workplaces and mechanisms; rules for the production of slings, rigging work using lifting mechanisms.
Characteristics of work. Installation and dismantling of: main process equipment, drilling process control panels, rotary cranes, metal frames for covering drilling rig blocks, automatic lowering and lifting of drilling tools, automation equipment; tire-pneumatic couplings; A-shaped derricks and tower-type derricks up to 45 m high. Lifting and installation of individual blocks of the drilling rig, drilling and power equipment on the foundation. Docking of blocks using lifting and transport vehicles. Assembly and crimping of injection lines and manifolds with pressure up to 15 MPa (150 kgf/sq. cm). Power transmission alignment. Reactivation and testing of drilling equipment and drilling rigs. Management of the rig crew during installation, dismantling and transportation of drilling rigs with a nominal lifting capacity of up to 100 tons.
Must know: industrial methods for constructing drilling rigs of all types; design of drilling rigs, drilling equipment, mechanisms used during their installation and dismantling; high and high pipeline communication diagrams low pressure, fuel system, instrumentation and equipment; methods of installation and dismantling of tire-pneumatic couplings; methods of alignment and testing of the equipment used and the drilling rig; basic rules for the production of electric welding, electrical installation, slinging and rigging works; purpose of hydrocyclone and degassing installations; types of vehicles for transporting large blocks.
Characteristics of work. Acceptance of the drilling rig for installation and commissioning after installation. Installation and dismantling of A-frame towers and tower type towers. Assembly and pressure testing of injection lines and manifolds with pressures from over 15 MPa to 30 MPa (over 150 kgf/sq. cm to 300 kgf/sq. cm). Binding standard scheme location of the drilling rig equipment to the terrain conditions. Selecting a route for transporting drilling rig blocks. Placement according to the diagram of drilling equipment, transport and lifting equipment and materials. Travel system equipment. Test launch of the drilling rig. Preparation of relevant documentation for the drilling rig. Management of the rig crew during the installation, dismantling and transportation of drilling rigs with a nominal lifting capacity of over 100 tons up to and including 200 tons.
Must know: the procedure for accepting the drilling rig for installation and putting it into operation after installation; layout diagrams of drilling rig equipment, rational arrangement of construction and installation equipment on construction site; the influence of soil conditions and terrain on the choice of route and methods of moving the drilling rig; hydraulic system drilling rigs; standard projects organization of workplaces and network planning during the construction of drilling rigs; purpose, design and operating rules of vehicles for transporting large blocks.
Characteristics of work. Acceptance of the drilling rig for installation and commissioning after installation. Installation and dismantling of A-shaped towers, tower-type towers and complex structures with a height of over 45 m. Assembly and pressure testing of injection lines and manifolds with a pressure of over 30 MPa (over 300 kgf/sq. cm). Linking the standard layout of drilling rig equipment to terrain conditions. Selecting a route for transporting drilling rig blocks. Placement according to the diagram of drilling equipment, transport and lifting equipment and materials. Travel system equipment. Test launch of the drilling rig. Preparation of relevant documentation for the drilling rig. Management of the rig crew during the installation, dismantling and transportation of drilling rigs with a nominal lifting capacity of over 200 tons up to and including 250 tons.
Must know: the procedure for accepting the drilling rig for installation and putting it into operation after installation; layout diagrams of drilling rig equipment, rational arrangement of construction and installation materials and equipment on the construction site; hydraulic system of drilling rigs; the influence of soil conditions and terrain on the choice of route and methods of moving the drilling rig; standard projects for organizing workplaces and network planning for the construction of drilling rigs; the procedure for keeping records and reporting on the use of transport and materials; purpose, design and operating rules of vehicles for transporting large blocks.
When installing, dismantling and transporting drilling rigs with a nominal lifting capacity of over 250 tons - 8th category.
Secondary vocational education required.
3. Derrick erector 4th category
Characteristics of the work. Installation, dismantling and transportation of drilling rigs, rig structures, mechanisms for raising and lowering derricks, equipment for the drilling fluid circulation system, a block of spare tanks, a power unit and mechanization and automation equipment. Breakdown of the locations of foundations for drilling equipment and subsurface foundations. Laying and piping of exhaust manifolds for diesel engines, participation in the assembly and crimping of injection lines and manifolds under the guidance of a more highly qualified rigger. Alignment of the drilling rig, drilling, power equipment and individual blocks of the drilling rig. Leading a derrick crew in assembling, moving and disassembling drilling rigs for geological exploration drilling with towers of all types and designs used in geological exploration equipment.
Must know: methods and rules for installation, dismantling and transportation of drilling rigs; design of a mechanization and automation complex; the purpose and technical characteristics of the complex of mechanisms for lowering and lifting operations, mechanisms of the circulation system, communications for steam and water supply, electricity supply, pneumatic systems and heating of workplaces and mechanisms; rules for the production of slinging and rigging works using weights lifting mechanisms.
From July 1, 2016, employers are required to apply professional standards, if the requirements for the qualifications that an employee needs to perform a certain job function are established Labor Code, federal laws or other regulations ( the federal law dated May 2, 2015 No. 122-FZ).
To search for approved professional standards of the Ministry of Labor of the Russian Federation, use
Resolution of the Ministry of Labor of the Russian Federation dated November 14, 2000 N 81 “On approval of the Unified Tariff and Qualification Directory of Work and Professions of Workers, issue 6, sections: “Drilling wells”, “Oil and gas production”
3. Derrick erector
4th category
Characteristics of the work. Installation, dismantling and transportation of drilling rigs, rig structures, mechanisms for raising and lowering derricks, equipment for the drilling fluid circulation system, a block of spare tanks, a power unit and mechanization and automation equipment. Breakdown of the locations of foundations for drilling equipment and subsurface foundations. Laying and piping of exhaust manifolds for diesel engines, participation in the assembly and crimping of injection lines and manifolds under the guidance of a more highly qualified rigger. Alignment of the drilling rig, drilling, power equipment and individual blocks of the drilling rig. Leading a derrick crew in assembling, moving and disassembling drilling rigs for geological exploration drilling with towers of all types and designs used in geological exploration equipment.
Must know: methods and rules for installation, dismantling and transportation of drilling rigs; design of a mechanization and automation complex; the purpose and technical characteristics of the complex of mechanisms for lowering and lifting operations, mechanisms of the circulation system, communications for steam and water supply, electricity supply, pneumatic systems and heating of workplaces and mechanisms; rules for the production of slinging and rigging works using lifting mechanisms.
The training of a tower assembler is carried out in accordance with the Order of the Ministry of Education and Science of the Russian Federation dated 02.08.2013 No. 897n “On approval of the Federal State educational standard“Vyshkomontazhnik (wide profile)”, “List of worker professions, employee positions for which vocational training is carried out”, approved by Order of the Ministry of Education and Science No. 513 of July 2, 2013, the requirements of the Unified Tariff and Qualification Directory of Work and Worker Professions, All-Russian Classifier of Worker Professions , employee positions and pay grades.
Derrick assembler (wide profile) - a profession that involves installation, dismantling and transportation of drilling rigs, welding and electric installation work during the construction of drilling rigs and technical operation lifting mechanisms and equipment used. A wide-profile derrick assembler places blocks of drilling rigs and auxiliary equipment on the foundation, installs pumps and equipment for preparing and cleaning drilling fluid, aligns derricks and equipment, performs preparatory work for installation, dismantling and transportation of towers and equipment, etc. The responsibilities of a tower erector (wide profile) also include welding work during the installation and dismantling of drilling and power equipment, gas cutting of profile and grade metal.
The profession of a rig operator involves performing the following work: installation, dismantling and transportation of drilling rig blocks, boiler units, water pumping units, fuel oil units, equipment for drilling with electric drills, metal transition platforms, ladders, ladders and fences on power, pumping, energy, derrick and winch blocks and drilling fluid cleaning systems; installation of a concrete coating under the drilling rig, bases and platforms for spare tanks and clay mixers, fences for moving parts of mechanisms; performing excavation, concrete, plumbing, carpentry and loading and unloading work during the assembly and disassembly of towers and superstructures; installation of anchors for fastening and centering the tower; breakdown of the location of the foundations of the foundations of drilling equipment and adjacent structures under the guidance of a more highly qualified derrick operator; laying and piping steam and water lines; lubrication of drilling and process equipment; preparing auxiliary equipment for transportation; assembly, movement and disassembly of drilling rigs for geological exploration drilling with towers of all types and designs, etc.
To perform the work, the derrick operator must know: the purpose of drilling rigs, the mechanisms and equipment used; purpose of tower parts and structural units of foundations, foundations and superstructures; dimensions of constructed fences for barns and work sites; methods of installation, dismantling and transportation of drilling rigs; layout of drilling equipment and communications; technical characteristics of mechanisms used in tower construction; placement of instrumentation; rules for using metalwork and carpentry tools; rules for slinging, lifting and moving small cargo; conditional alarm for crane operators, etc.
In order to carry out work, a tower assembler must undergo vocational training, no more than once a year and no less than once every 5 years, undergo short-term advanced training courses of at least 72 hours in order to acquire new knowledge and skills and improve their rank, have a medical record with no contraindications to work. It is important that persons under 18 years of age are not allowed to work as a tower assembler.
ANO DPO "Comprehensive Training Center for Personnel Retraining" provides vocational training in the following programs:
Form of study: full-time, part-time, distance learning using Internet technologies.
In the process of mastering the training program, developed taking into account the Order of the Ministry of Education and Science of the Russian Federation dated 08/02/2013 No. 897n “On approval of the Federal State Educational Standard “Higher Assembly Worker (wide profile)”, Order of the Ministry of Labor of Russia No. 513 dated 07/02/2013 “On approval of the List of blue-collar professions, positions employees for whom professional training is carried out" for development working profession tower erector The following questions are studied:
Classes are held in the classroom of the ANO DPO “Comprehensive Training Center for Personnel Retraining,” as well as through the Internet portal of the Training Center website.
After completing vocational training (either in a specialized school or training center), a tower assembler must annually take short-term advanced training courses of at least 72 hours, no more than once a year and no less than once every 5 years.
0.1. The document comes into force from the moment of approval.
0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
0.3. The document has been approved: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
0.4. Periodic verification of this document is carried out at intervals not exceeding 3 years.
1.1. The position "Digital erector 4th category" belongs to the category "Workers".
1.2. Qualification requirements- vocational and technical education. Training. Work experience in the profession of a 3rd category tower erector - at least 1 year.
1.3. Knows and applies in practice:
- methods and rules for installation, dismantling and transportation of drilling rigs;
- design of the mechanization and automation complex;
- purpose and technical characteristics of the complex of mechanisms for hoisting operations, mechanisms of the circulation system;
- communication diagrams for hot water supply, electricity supply, pneumatic systems and heating of workplaces and mechanisms;
- rules for carrying out slinging and rigging work using lifting mechanisms.
1.4. Appointed to a position and dismissed from a position by order of the organization (enterprise/institution).
1.5. Reports directly to _ _ _ _ _ _ _ _ _ _ .
1.6. Supervises the work of _ _ _ _ _ _ _ _ _ _ .
1.7. During absence, he is replaced by a person appointed to in the prescribed manner, which acquires the corresponding rights and is responsible for the proper fulfillment of the duties assigned to it.
2.1. Carries out installation, dismantling and transportation of drilling rigs, drilling structures, mechanisms for raising and lowering derricks, equipment for the circulation system for cleaning drilling fluid, a block of spare tanks, a power unit and mechanization and automation equipment.
2.2. Breaks down the locations of the foundations of drilling equipment and derrick structures.
2.3. Lays and ties exhaust manifolds for diesel engines, fuel, water and oil lines.
2.4. Pressurizes lines and tanks with pressure from 1.6 MPa to 2.6 MPa (from 1.6 kgf/sq.cm to 26 kgf/sq.cm).
2.5. Centers the derrick, drilling, power equipment and individual units of the drilling rig.
2.6. Carries out the laying of power transmission line supports.
2.7. Supervises the rig team during the assembly, movement and dismantling of drilling rigs with derricks of all types and designs.
2.8. Knows, understands and applies current regulations relating to his activities.
2.9. Knows and complies with the requirements of regulations on labor protection and environmental protection, complies with the norms, methods and techniques for the safe performance of work.
A 4th category tower erector has the right to:
3.1. Take action to prevent and correct any violations or non-compliances.
3.2. Receive all social guarantees provided for by law.
3.3. Request assistance in fulfilling your job responsibilities and exercise of rights.
3.4. Require the creation of organizational and technical conditions necessary for the performance of official duties and the provision necessary equipment and inventory.
3.5. Get acquainted with draft documents relating to its activities.
3.6. Request and receive documents, materials and information necessary to fulfill their job duties and management orders.
3.7. Improve your professional qualifications.
3.8. Report all violations and inconsistencies identified in the course of its activities and make proposals for their elimination.
3.9. Familiarize yourself with the documents defining the rights and responsibilities of the position held, and the criteria for assessing the quality of performance of official duties.
A 4th grade tower erector is responsible for:
4.1. Failure to fulfill or untimely fulfillment of the requirements set forth herein job description obligations and (or) non-use of granted rights.
4.2. Failure to comply with internal labor regulations, labor protection, safety regulations, industrial sanitation and fire protection.
4.3. Disclosure of information about an organization (enterprise/institution) related to a trade secret.
4.4. Failure to comply or improper fulfillment of internal requirements regulatory documents organization (enterprise/institution) and legal orders of management.
4.5. Offenses committed in the course of their activities, within the limits established by the current administrative, criminal and civil legislation.
4.6. Causing material damage to an organization (enterprise/institution) within the limits established by current administrative, criminal and civil legislation.
4.7. Illegal use of granted official powers, as well as their use for personal purposes.
