Nowadays, visiting a bathhouse is not just a trip to the steam room, but a complete rest, combined with gatherings with friends and eating barbecue. Therefore, many pay great attention to comfort and convenience in the bathhouse, not limiting themselves to the construction of a building with a steam room, washing room and dressing room. People are trying to create spacious lounges, terraces, swimming pools, make flower beds and lay out lawns next to the bathhouse.
Bathhouse designs with an attic and a terrace have become noticeably more popular, as they make it possible to significantly increase the comfort and functionality of the bathhouse and make it a wonderful place for outdoor recreation.
The attic is a room with a sloping ceiling. This unusual appearance of the room makes it especially cozy and comfortable. Initially, attics were preferred by people of creative professions; in such a quiet, bright and cozy room they were inspired and relaxed. Today, an attic is not a luxury, but an opportunity to rationally use space.
The advantage of bathhouse projects with an attic is that you can place anything in this room! Many people decorate their bedroom here. It is enough to place a bed in the room, and you can stay here overnight, and if there is a house on the territory, then the attic can serve as a guest room.
Some people make a bar here: they put a bar counter, a billiard table, cozy sofas and TV. In such a room it is pleasant to relax after bath procedures.
Projects of 6 by 6 baths with an attic: advantages, design features
Having your own bathhouse in itself makes outdoor recreation more enjoyable. But it is not always possible to place not only a bathhouse, but also a house on the ground; in this case, a bathhouse with an attic would be an excellent option.
The choice of designs for bathhouses with an attic is huge. They differ in area, number of rooms, etc.
When choosing a project, you need to focus on the size of the site and your needs. If you plan to go to the bathhouse together, then there is no point in making a large building, but if you prefer to relax with a large group, then you need to build a spacious bathhouse.
Please note that what more sauna, the more expensive the construction and maintenance of the bathhouse will be. A small steam room will warm up much faster.
It is much easier to make a project at the stage of building a bathhouse, rather than attaching an attic to a finished building. In the second case, it may be difficult to place the staircase: if it is difficult to build it in the house, then you can build the staircase on the street. If you are going to go to the bathhouse not only in the summer, then the stairs will need to be covered with walls.
In this case, you will not only have a separate room, but also a cozy veranda where you can sit and breathe fresh air.
If there is no pond near the bathhouse, then think about choosing a project with a swimming pool. At first glance, it seems that such drawings are complex and expensive to implement, but this is not always the case. For example, you can buy a ready-made small plastic bowl, in which case building a sauna with a swimming pool will be quite inexpensive. At the same time, installation of the finished bowl is simple, so you can do it yourself.
Bathhouse designs with an attic may include one room on the attic floor or several. It is convenient to have a small balcony; you can put a couple of chairs on it and spend time here in the evening.
The layout of bathhouses with an attic can provide only the necessary premises, as well as additional ones. For example, if there is no toilet on the site, then good option There will be organization of the bathroom. If you do it in a bath small kitchen, then the building can be used as a house.
If you have small area, this does not mean that you cannot make a comfortable and spacious bathhouse. The 4.5x4.5 m project has compact dimensions, but it has everything you need: a steam room, a shower room and a relaxation room. On the second floor there is a bedroom where you can make a place to sleep, and this room is also suitable for storing various things.
A 6x4 bathhouse with an attic is the simplest and most popular option. On the ground floor of the building, in addition to the main premises, there is a terrace. They are convenient because you can place a table and chairs on the veranda. On a summer day it’s nice to be not indoors, but outdoors, where you can enjoy the singing of birds, fresh air and beautiful scenery. The roof will protect you from bad weather, and the partitions from the wind.
If you look at the photo of the 4x6 bathhouse project with an attic, you can see that the second floor is occupied by one attic. There are no partitions here, so the room is quite spacious.
This project is suitable for spacious areas as it requires a lot of space. Its advantage is its large capacity. In such a bathhouse there is enough space to create not one, but three rest rooms; a large company can easily fit here.
The advantage of the project is the presence of separate vestibules, a hall, a bathroom and a terrace - all these rooms make visiting the bathhouse more comfortable.
This option is simple, without unnecessary rooms, but thanks to this the rooms are spacious and roomy. provides a steam room, a sink, two lounges, a balcony and a terrace. It is perfect not only for bath procedures, but also as a guest or country house where you can stay overnight.
If you look at the photo of bathhouses with an attic, you can see options from different materials: wood, aerated concrete, expanded clay concrete, brick.
Projects for log baths with an attic are the most popular option. Our ancestors also preferred this material. Wood helps create comfort and a special microclimate; it eliminates the need to make interior and external finishing. Wood is environmentally friendly pure material, having a good level of thermal insulation.
The most common option would be a timber bathhouse project. Constructing a building from this material is quite simple; the timber gives minimal shrinkage and provides high level thermal insulation.
More expensive option is a project for a bathhouse made of rounded logs with an attic. This material is more expensive and also more difficult to construct, so it requires the involvement of experienced specialists. Its advantage is its appearance - the authenticity of a traditional Russian bathhouse.
Log baths with attic (photos, projects):
Aerated concrete bathhouse is a less popular option. Despite the fact that aerated concrete appearance doesn't look like natural material, no harmful chemical components are used for its production, so it is completely environmentally friendly. A bathhouse made of aerated concrete requires external and internal finishing, but its important advantage is fire safety. While wood is easily flammable, aerated concrete has a high level of fire resistance and can prevent the spread of fire.
A brick bathhouse is a strong and reliable structure that will serve you for many years. Brick, like aerated concrete, is fire resistant. The disadvantages of a brick bathhouse are the complexity of construction, high price and heavy weight, which is why you have to make a reinforced foundation.
Which material to choose for the construction of a bathhouse with an attic is up to you to decide: each of them has its own “pros” and “cons”. Those for whom main role safety plays a role, they often give preference to fire-resistant materials (brick, aerated concrete, expanded clay concrete), and those who want to recreate a classic Russian bathhouse choose wood.
Initially, the attic floor was an accessible place where aspiring artists, musicians, and poets lived. Over the years, the attic has acquired legends and traditions, and living in it has become prestigious.
Saunas made of timber with an attic are very popular. Such projects significantly increase the functionality of the entire structure, making it suitable for permanent residence.
A one-story bathhouse is used for its intended purpose. In turn, a building with an attic can be used as ordinary house. Several tens of meters of living space can always be used. Typically, bedrooms, lounges or large playrooms for children are located on the top floor.
Profiled timber is quite suitable for constructing a building for permanent residence. Even if the dimensions of the building are 6x6, it can be used at any time of the year with good insulation.
And if you add a terrace or veranda to the main building, the bathhouse will turn into a full-fledged residential center. You can wash, steam, relax and cook in it. Photos of such projects can be assessed on the website of the construction company SK Domostroy.
First of all, safety requirements are increasing. Will pass through the attic chimney. This means it is necessary to install the stove so that the pipe does not interfere with living on the attic floor. Usually it is installed close to the wall to save space.
To provide fire safety the pipe is lined with asbestos or other non-combustible materials. They not only do not burn, but also remove excess heat that occurs during high heating.
In addition, high-quality vapor barrier is necessary. It will protect the attic from steam arising in the steam room.
A bathhouse on a personal plot is the secret desire of every land and household owner. The building is of great value. It lies in the health benefits and artistic beauty. In an effort to acquire something exclusive, many are thinking about such an option as a bathhouse with an attic. It has an undeniable majesty and is equipped with numerous design nuances. Let's consider the subtleties of designing such a structure.
The exclusivity of attic baths implies the full implementation of a variety of design solutions. Choose a bath house option taking into account characteristic features. For those who like to design various variations of buildings, a bathhouse with an attic will be an excellent way to realize their own ideas. One of the main superstructure structures of the attic is the staircase. Climbing to the attic in the bathhouse will require its presence.
The counterbalancing points should be carefully analyzed, taking into account the arguments for and against. Only after taking into account the main characteristics of a personal bath structure is it possible to consider design issues. One more design feature bathhouses with an attic is the roof structure. It is important to take into account the limitations of the attic. To make this floor useful, a broken gable roof structure is often used.
A pitched roof is undesirable; the type of traditional gable roof also cannot be called the most convenient. Tent tents are often used roofing structures. WITH geometric parameters more or less clear. Choose an option for climbing to the attic, taking into account one or another roofing option. For example, marching type options are considered the most effective, but they are difficult to install in small areas. Main devices adapt especially poorly to the design of 4x4 m bathhouses.
Bolster ladders are equipped with the advantages of marching devices. Such systems cannot be applied to frame structures, since they require a strong load-bearing support. Steps are attached to the wall. If the bathhouse is made of other materials, the device is quite acceptable for use.
Devices screw type They are not very convenient, but they are effective in terms of saving space. Often they become a lifesaver in a 4x4 or 5x5 m attic bathhouse project.
The best version of the project with a veranda, terrace and attic involves placing the rooms in the following order:
The veranda is often used as a dining area, filled with benches, chairs, and tables. This space is usually open, creating an atmosphere of simple natural beauty. However, the veranda is sometimes sacrificed to increase internal area baths Arrangement is allowed in the attic area sleeping place, game room(for example, a billiard room), a storage room. If the attic is a storage room, it is more expedient to equip a resting place below. For comfort in the attic, a total room height of 2.5 meters should be provided.
On modern market There are many types of building materials that can be used for any bathhouse. For example, they are built from:
If the project contains brick, foam concrete and aerated concrete, the walls require cladding, both inside and outside. This feature is related to technical qualities materials. For example, brick bath Without insulation it will be cold. The qualities of aerated concrete and foam concrete are almost similar. The structural pores of these materials can collapse under the influence of high humidity and temperature changes. In this case, it is important to perform the cladding of the foundations with the construction of the structure.
The most suitable material for building a bathhouse is wood. Wood is environmentally friendly, reliable and durable, practical and durable. In such construction they also use frame technologies. In this case, both wooden and metal frames are allowed. The cladding is installed on top of the frame. Be sure to choose high-quality insulation for such a structure, which will serve as insulation for the entire structure.
The finishing of a frame building can be made of:
Interior decoration can be made from plastic. The most economical and profitable technology for constructing baths is frame. The frame does not require a massive foundation. In this case, building materials are not the most expensive. And the weight of the building will not have any additional effect on the soil.
Determining the material for building a bathhouse - important stage. IN construction stores There are standard constructors made from ready-made elements. An assembly kit is purchased based on standard developments. Constructor parts can be made with my own hands. For the construction of baths they are often used wood materials(for example, timber, logs, rounded wood), block panels are often considered. Having dealt with the raw materials of construction, they move on to design.
Bathhouse designs with an attic vary in size and layout. The most popular of them include structures 6x6, 6 by 4 m. Despite the fact that the buildings are compact and usually simple, they provide complete relaxation. This option is suitable for small quantity people, as well as those who do not have extra space on the site.
The 6x4 m project plan involves the placement of:
Some small projects do not include a veranda. Sometimes area entrance area turns into a relaxation room. In this case, a guest room is placed on the attic floor. Sometimes the attic involves placing a storage room.
The staircase is placed so as not to clutter the bathhouse. Structures of 6x6 or 4x6 m will also not occupy the territory of the site. An equipped attic will make the building area more useful. Wherein inner dimensions Bath rooms can vary at the request of the owner during construction.
The design of a bathhouse with an attic of 6x8 m usually accommodates everything necessary for relaxation big company. This building layout even includes a bathroom. More often there is a large terrace and a relaxation room of 20 sq. m. The room can accommodate standard furniture and even big table. A group of several people can fit at the table, while leaving space for free use.
The building includes a classic shower room and a relaxation room. There will be a spare bedroom on the attic floor. This could be a billiard room, tennis room or gym. The building material will be profiled timber.
A good compromise is the layout of baths 5x5 5x6, 5 by 9 m. To visit small bathhouse pleasure, everything must be carefully calculated. The layout of the premises is important to take into account a well-thought-out plan. For example, in a small bathhouse 5x5 m there will be an entrance hall, a washroom, a steam room, a relaxation room or a storage room on the attic floor.
Choosing a suitable log house project is always a search for a compromise. The bathhouse must accommodate all dimensions. When choosing a 6x9 or 7 by 8 m bathhouse, it is important to take the marking of the area seriously. Think carefully about the placement of the bathhouse (especially if the land is only 6 acres).
One more important parameter is the cost of construction. Logging of large dimensions will require a larger area on the site. For example, a log house with parameters of 4x6 m will cost 10,000-15,000 rubles more than a 4x5 m bathhouse. For a bathhouse larger area it will take more time and fuel to heat. The temperature in the steam room should be sufficient for the heat.
An important parameter for choosing the size of the bathhouse is the number of people who will visit it. If the number of steam lovers does not exceed two people, it is enough to build a small and low structure. For a large family and regular guests you need a large building. To correctly indicate the layout, draw drawings.
Let’s say it’s decided to build a log bathhouse 5x5 meters.
If we consider standard plans functional zones, there are three main ones:
The 5x5 m bathhouse layout option involves placing the firebox not in the dressing room, but in a separate corner, separated by a wall. The same wall separates the dressing room from the steam room. The waiting room will be spacious. It is convenient to place a table and benches, as well as hangers. This room can be a living room.
A 5x5 m bathhouse will accommodate a group of 5-6 people. The attic floor in such a bathhouse is often used as small room recreation. The attic can be equipped with a toilet and shower room. It is definitely worth considering communications.
In a 5x5 m bathhouse, it is important to install the doors correctly. For example, it is important to get directly from the guest room to the wash room. This placement will prevent heat loss from the steam room. The shower room can be highlighted a little less space than a steam room. Plan your steam room carefully. It is important to carefully consider the shapes and sizes of the shelves.
Don’t forget that part of the area will go under the stove and heater. Its location should not be close to the wall, otherwise there will be a risk of the sheathing catching fire and wooden walls. They expand the area of small baths by providing the building with a terrace. A small terrace can serve summer kitchen. The construction of a terrace will increase the amount of building material.
The rules imply the preparation of a building project simultaneously with the installation of all necessary communications. You will definitely need water, electricity (sometimes gas). Pad water pipes takes place during the construction of the structure. You should not lose sight of installing a high-quality ventilation system in all rooms (including rest rooms), otherwise the humidity will increase. Humid air will cause fungus to appear on the walls. Some types of building material will begin to deteriorate quickly.
To save optimal warmth In winter, it is important to provide a heating structure. Only with additional heating can optimal temperature regime in the cold. In addition to ventilation in bath room it is important to provide high-quality waterproofing and thermal insulation. Installation of communication systems in a two-story building is easier than in a one-story building with extensions.
Work related to planning is a critical stage in the construction of a bathhouse. It must be approached with full responsibility.
Once the planning issue has been resolved, determine the following important organizational steps:
The standard arrangement of rooms is usually as follows:
Sometimes a shower room and a steam room are provided with an additional entrance. All this is located on the first floor. The second floor is often used for entertainment, recreation or household needs. Sometimes a solarium is installed on the second floor. This adds comfort to the rest of a large company.
Buy a ready-made standard construction set. Create a standard bathhouse from an assembly kit. Coming up with your own options for arrangement details is more difficult. If the soil properties on the site are unstable, use frame constructors for the construction of the attic complex. Columnar and screw foundation structures will help strengthen the foundation of the bathhouse.
The benefits of the bath were known back in ancient times. Since then, each nation has developed its own, ardently revered bathhouse tradition, and in Rus' bathhouses were a common feature of the rural landscape. Modern country life It’s also hard to imagine without the joy of visiting a bathhouse. On the garden plot you can see both the now familiar sauna and the more exotic hammam. But, despite familiarity with the customs of other cultures, the majority prefer the traditional Russian bathhouse.
To please themselves with a good rest and increase their health, the owners build bathhouses of various designs and materials. Practical owners strive to build a multifunctional bathhouse, which could become not only a decoration of the site and a health center, but also perform additional functions. Bathhouses made of timber with an attic are more suitable for this than others.
Timber bathhouse 6.3x6.3 m with attic Source kos-brus.ru
A bathhouse with an attic and a terrace is usually built from wood; the most common options are:
Log baths. Traditionally, bathhouses (and other buildings) in Rus' were built from chopped logs, the most available material. Such designs still exist, but they are not very common due to their features: labor-intensive manual processing logs, the high cost of quality logs, long drying times and significant shrinkage. Nevertheless, designs for bathhouses with an attic made from this material are presented in a wide range. A steam room made from hand-processed logs will be of better quality than one built from rounded logs (which, however, depends on the skill of the hired carpenters), but will cost 40-50% more.
Panel (frame) baths. They are valued for their speed of assembly and cost-effectiveness during construction - they do not need a massive foundation. But such a building needs high-quality insulation and finishing, the costs of which can offset the savings. Therefore, it is necessary to study well the designs and prices - with all the details - before choosing a bath house made of timber.
Bathhouses made of laminated veneer lumber. The main advantage of the material is minimal shrinkage, which allows you not to delay using the bath for its intended purpose. Ordering such a turnkey bathhouse with an attic is completed in the shortest possible time.
Attic bathhouse in Scandinavian style Source giropark.ru
Baths made of profiled timber. The building pleases the eye with the impeccable shape of the facade; at the same time timber natural humidity has its own characteristics. It can be significantly deformed when drying, become covered with cracks, and the shrinkage of the box in the first year will be 10–15%. Chamber-dried timber is more expensive (the price is close to a rounded log), but the risk of deformation is minimized, and shrinkage does not exceed 3–6%. This makes kiln-dried timber one of the most practical materials for building a bathhouse.
For such baths, instead of a regular attic, an attic floor is designed - a full-fledged living room with insulation and characteristic sloping walls. Such living space is interesting from the point of view of the emerging prospects, including:
Additional square meters. The most obvious advantage is that it allows you to use the room for different purposes. A 5 by 5 bathhouse with an attic can become a multifunctional structure. In addition, the room will be 30-35% cheaper than a similar one in a residential building, but will be just as comfortable. The mansard (sloping) roof, thanks to the vertical side gables, allows you to achieve maximum use area. Hip or gable roof less profitable because, due to the design features, it reduces usable space.
Interior of a guest room in the attic of a bathhouse Source assz.ru
Saving land. Bathhouse made of timber with an attic - profitable solution, if the plot is of modest size, and the owners have big plans for its arrangement. The saved space can always be put to good use.
Multifunctionality. With the acquisition of an attic, the possibilities of using a bathhouse expand significantly. The owners can set up a gym here (which would otherwise remain a dream), a cinema hall, and equip a recreation area with a billiard table and a minibar. For some, it is more important to organize a guest room or a home SPA center. A bathhouse with an attic and a terrace will also expand opportunities for outdoor recreation.
Originality. Historically, the design of an attic floor with a slanted ceiling line itself evokes romantic thoughts about a bohemian lifestyle; Therefore, it is especially pleasant to relax and communicate here. The unusualness of the situation can be emphasized by decorating the attic in the appropriate style. Luxurious oriental motifs, airy Provence with wicker furniture or the decor of a closed yacht club look impressive. The effect is enhanced by windows installed in the roof, a podium instead of a bed and light through shelving. If the choice fell on a bath house, projects with an attic are the most rational solution.
Source homishome.com
On our website you can get acquainted with the most popular bathhouse projects from construction companies presented at the exhibition of houses “Low-Rise Country”.
Bathhouse designs with an attic also have some disadvantages:
The issue of isolation. The top floor of a bath house with an attic needs careful protection from moisture, which is ensured by a layer of vapor barrier layer in the ceiling. The interlayer will retain thermal insulation and building structure without allowing it to develop mold fungi and microorganisms hazardous to health.
The issue of insulation. If you plan to use the attic floor year-round, you will have to thoroughly insulate it.
The issue of complicating construction. The steeper the roof slopes, the more space there will be underneath. usable area. The best option would be a sloping (mansard) roof, but it will cost more.
Broken mansard roof - technically complex design requiring a professional approach Source bruskarkasdom.ru
In modest-sized baths (3x4 or 4x4 m), it is unprofitable to install an attic floor; For them, expansion by arranging a terrace or veranda is suitable. However, bathhouses with an attic and veranda are of particular interest. You can save money on construction if the bathhouse has dimensions of 6x4, 6x6, 6x8 m and larger. In this case total area can reach 60-80 m2, and the project provides for:
On the first floor: open terrace, hallway, dressing room (rest room), washing room and steam room. It is more convenient to place the stairs to the second floor in the hallway so as not to clutter up other rooms.
On the attic floor: hallway, recreation room (or room with another purpose), storage room.
Balcony. A 6x6 (or larger) project may also include a balcony. Many owners like the idea of space for summer holiday with leisurely tea drinking in the fresh air.
Turnkey bathhouse with attic - project with a balcony and veranda Source lestorg32.ru
On our website you can find contacts of construction companies that offer bathhouse design and construction services. You can communicate directly with representatives by visiting the “Low-Rise Country” exhibition of houses.
The most popular option is a 6x6 turnkey bathhouse with an attic, which is inexpensive and allows you to comfortably accommodate a family or a noisy group of friends. The design of a bathhouse may vary from project to project, for example, a dressing room is often combined with a recreation room (if the attic is intended for other purposes). The remaining rooms are equipped as follows:
Waiting room. You can allocate a small auxiliary room in it, which can be used as a dressing room and/or a storage room for firewood.
Steam room. A two-tier shelf and a suitable-sized sauna stove are installed here. Windows are traditionally made small.
Washing room. Usually a shower tray, a wooden (oak, larch or cedar) or plastic (with antibacterial coating) font is installed.
Steam room in a timber bath Source giropark.ru
Restroom. Perfect for complete relaxation would be better suited wooden floor, dim diffused light, comfortable furniture and pastel colors.
Bathroom. Modern requirement for comfort; for a full bathroom, 1.5-2 m2 is enough.
Pool. The dream of many bathhouse owners. By giving up the terrace and slightly reducing the area of other rooms, you can treat yourself to such luxury.
Terrace. If it is glazed, it can be used for relaxation during rainy and cold seasons. Lanterns look good here as a decorative element.
What a turnkey bathhouse with an attic and veranda looks like is shown in the following video:
A turnkey bathhouse with an attic will be inexpensive compared to a full two-story structure. Customers are attracted by the opportunity to save money without losing convenience and functionality. It is best when an additional floor is planned during design, then the calculation of load-bearing structures will be as accurate as possible. Otherwise, inevitable difficulties will arise with adding a staircase (most likely, a screw model will be successful) and windows (it is inconvenient to install windows in some types of roofs).
t600359-08
Project of a bathhouse with an attic made of laminated veneer lumber Source lineyka.net
Owners who build an attic bathhouse on their own often go to two extremes when building a staircase. It turns out to be either prohibitively large, and then eats up precious space, or (with the best intentions) prohibitively steep. The descent along such a structure turns into an entertaining, but fraught with injury attraction. And if the exit point of the stairs rests on a sloping wall, then you should also take care of your head.
There are several ways to make a staircase not only functional, but also a comfortable (and preferably beautiful) interior detail. Of all the variety of bath stairs that exist in nature, the following options are familiar:
Marching staircase. Depending on the allocated area, it can be one- or two-flight. Such designs are the most familiar, easy to manufacture, and therefore most common. There are marching staircases on stringers, bowstrings or rails; The main thing for them is the correct calculation of the parameters of the steps and the distances between them.
Classic two-flight staircase Source beautycontraception.ru
Spiral staircase. A winning option for a bathhouse, as it takes small area, costs less and looks very impressive. Compared to the marching one, screw design has a steeper ascent angle and a smaller width of steps, which is potentially more dangerous.
The recent trend has been the construction of a wooden single-flight staircase with a steep angle (35-45°) and proportions tied to medium length step. This option, borrowed from the construction techniques of the Scandinavian countries, makes it possible to make the stairs to the attic as comfortable and safe as possible.
About the construction of an attic bathhouse from profiled timber in the following video:
The classic Russian bathhouse had no communications and, like all medieval buildings, was heated in a black way. Firewood was brought from a neighboring forest, and water was taken from a river or well. Modern bath house - projects with an attic and ordinary steam rooms are connected to all communications, which allows you to enjoy the process in comfortable conditions. All necessary networks are provided for at the design stage and include:
Water supply. The source can be a centralized or autonomous system, well or well. Sometimes a large storage tank is installed.
Electricity. Electricity is used for more than just lighting. It feeds the boiler, pump (if the supply water is coming from the well), electric furnace and Appliances, from the kettle to the TV. IN modern projects Warm floors are often installed.
The forced ventilation system also runs on electricity Source banyabest.ru
Gas. Instead of an electric boiler, you can install a gas boiler. Heating water will be more economical, but you will need to invite a specialist to install the boiler.
Sewerage and drainage system. If central system absent, a septic tank is used for drainage.
Ventilation. A system that increases the service life of a building and maintains the necessary sanitary standards; It can be natural (through an open window, which is often not enough) and forced. Ventilation is needed not only in the steam room, where steam, carbon monoxide from the stove and carbon dioxide exhaled by people accumulate. Air circulation is important both in the rest room and in the washing room with shower.
About the attic bathhouse with an area of 60 m2 in the following video:
Heating. A properly designed and constructed bathhouse allows you to avoid additional heating, limiting yourself to the heat of a brick or cast iron stove. If desired, additional products can be used in winter. The simplest and most effective will be electric heater. You can also use radiators, heated floors (water or electric), gas and electric convectors.
To build a bathhouse, the owner suburban area no need to rack your brains, inventing the outlines and structure of the future building, choosing and purchasing materials, raising walls and laying engineering Communication. Specialized construction company will help you choose a suitable project, carry out all the work competently and save the owner time, nerves and finances.
Typical design of a bathhouse with an attic and a terrace Source rozarii.ru
Companies offer bathhouses with an attic made of turnkey timber, the designs and prices of which are aimed at a wide variety of tastes. Choosing a standard project allows you to immediately begin construction and after a few months (if the bathhouse is made of glued or dry profiled timber) to test the bathhouse in action. Individual project will require consultation with an architect and additional time (and money) for development. The decision to build a turnkey bathhouse with an attic has several important advantages:
The bathhouse will be built on a site of any complexity.
You will get a bath within the period specified in the contract.
The design will reliable and durable, since the builders have extensive experience and use proven assembly technology.
Glazed terrace of a bathhouse made of laminated veneer lumber Source giropark.ru
When ordering a project you can often get special offer: free antiseptic treatment of the subfloor and lower crown, brick panel for the stove or metal door For a present.
Many organizations allow some changes in standard projects (changing the location of doors and windows) at no additional cost.
The most popular solution for a large family or friendly company is a bathhouse project measuring 5x5 and 6x6 m. The steam room in such projects is designed for 4-5 people, and the relaxation room for 7-8. An additional plus is that it is easier for a square building to find a place on the site, and the attic allows you to get a comfortable multifunctional space without taking up valuable land.
Individual project of a timber bath Source ecoterem-spb.ru
The opportunity to get “two in one” - a full-fledged living space that can be used at your discretion, and a bathhouse made according to Russian traditions attracts everyone more people. These buildings are different convenient layout and tall performance characteristics; Choosing a suitable project from a wide range will not be difficult. Prices for timber baths with an attic in the Moscow region are as follows:
Baths 4x6 m: from 245-260 thousand rubles.
Baths 5x5 m: from 265-270 thousand rubles.
Baths 6x5 m: from 280-295 thousand rubles.
Baths 6x6 m: from 320-350 thousand rubles.
For most people, a bathhouse is the most affordable and enjoyable way to relax from the hustle and bustle. modern life, chat with friends and join in the healing procedures proven by the thousand-year experience of our ancestors. Such a vacation will be especially successful if timber bath it will have an attic. Guests staying for the weekend will appreciate the advanced features this design provides.
