Cleanliness and freshness are associated with snow-white color - how to bleach and with what if the bath has lost its original White color? For this reason, most installed bathtubs are of this color. Over time, given the very careful attitude towards the product, the whiteness is lost, rust and water-scale deposits appear. Don't rush to replace the product.
We will tell you how to whiten a bathtub at home in this article.
All types of products differ not only in price, but also in the quality of the coating.
How long the special coating will last depends on the factory processing and how the product is used.
If you care for your bathtub according to the manufacturer’s recommendations, then after each use it should be cleaned and wiped dry. Nobody does this procedure.
Of course, not only these factors affect the color of the product; time is the main enemy. The longer a bathtub lasts, the more microcracks, pores, unevenness, and roughness there are. As a result, it is difficult to give it a white color, but difficult does not mean impossible.
Danger!!! Yellow plaque- This is not only an aesthetic discomfort, but also a very real threat to health. In a warm, humid environment, bacteria, fungi of various kinds and mold multiply well. Microorganisms of this type easily enter human body. They lead to diseases such as lichen, allergies, and various types of dermatitis.
Mold spores, with prolonged contact, will definitely lead to bronchial asthma. And if an adult’s body is resistant to some bacteria, then a child’s body is defenseless.
There are two ways:
Powdered cleaners (abrasive) can be used to keep cast iron and steel products clean.
They are easy to use. Pour onto a damp bath, rub with a sponge or brush, and remove with water.
Popular abrasive cleaning products: Comet, Sorti, Bingo, Pemolux.
These powders can easily cope with any type of dirt, but they have certain disadvantages. When applied, powder particles enter the lungs, and the abrasive agent damages the coating.
It is better not to clean a new bathtub with powder cleaners.
To clean a bathtub that has been in use for a long time and has lost its fresh appearance, you can use Comet or Pemolux soda 5+, they contain bleaching agents.
Attention!
Under no circumstances should acrylic bathtubs be cleaned with powders. Very fragile coating.
Most of these gels and sprays contain alkali and acid.
They do not create scratches, but due to chemical reaction corrode the coating, making it porous and rough.
For products made of cast iron and steel, one type of cleaner can be used.
Attention!!! For acrylic products, dilute vinegar one to five or replace it with citric acid 50g. per liter Reduce time by 30 minutes.
A melamine sponge will help you get rid of rust and other types of dirt on your own.
Traditional methods and means for cleaning the bathroom cope with stains no worse, and sometimes better, than household chemicals. They are not expensive and in most cases completely safe.
Before starting work, determine the material of the product, the degree of contamination and service life.
Steel baths
The enamel is thinner than that of cast iron plumbing.
You can clean it with the same means, lowering the concentration and shortening the exposure time of the drug.
Do not use hard materials or metal brushes for cleaning.
Cast iron products
They tolerate abrasive cleaning agents and aggressive cleaners well.
Acrylic products
The main disadvantage is the fragile coating. It is recommended to clean and bleach only with special gentle compounds.
In case of contact with skin or eyes, wash off big amount warm water.
Snow-white bath- this means careful and attentive handling of it. Carefully selected cleaning products taking into account the material of the product.
The bathroom is one of the most visited places in the house. Because of high humidity indoors, plaque, mold accumulates there, and rust also forms.
Yellow stains spoil the appearance of plumbing fixtures. It is unpleasant to wash in such conditions. Therefore, it is important to ensure that the bathtub remains white and remove any resulting stains using methods appropriate for the specific material of the product.
Often, unpleasant stains form on a bathtub, especially one that has been in use for a number of years. rust spots. Dealing with rust is not easy. It is an iron oxide and is removed with acids and alkalis. Perfect fit ammonia, vinegar and other aggressive agents.
If the stains are not completely removed, the procedure must be repeated.
Yellow stains can seriously ruin the appearance of your plumbing fixtures. Some chemicals contained in water, gels and shampoos can cause yellowness.
To whiten your bathtub, it is recommended to use soft brushes and creamy substances specifically designed for sanitary surfaces. Gentle cleaning may take longer than when using rough bristles and strong substances, but the enamel will remain intact.
Eat effective ways put away yellow spots. One of them:
Do not keep the solution longer, otherwise you may damage the enamel.
Another method involves using a whitening paste that can be prepared at home. To do this, you need to mix baking soda and soda ash, vinegar and powdered bleach in equal proportions. Mix everything until it becomes a paste. Apply the resulting paste to the yellow stains and leave for 15-20 minutes. Then rinse the bath with warm water.
If yellow spots appear again after removal, then you should pay attention to the quality of the water. Most likely, you will need to install filters.
How to whiten a bathtub at home from yellowness
We bought an apartment. Everything about it was perfect, the back of the bathtub...old, yellowed and dirty. My natural disgust did not allow me to use such unkempt plumbing. But I knew how to whiten a bathtub at home. Sharing useful tips with you.
Before choosing how to whiten a bathtub at home, it is advisable to understand two things:
The quality of water directly affects the condition of the bath
Recognizing the causes of pollution is important - if the source of the disaster is not removed, the problem will return again and again. A number of the main factors for the appearance of yellowness and plaque include:
Plumbing fixtures turn yellow over time, it’s inevitable!
It is necessary to determine what material the bathtub is made of so as not to spoil the surface of the plumbing during cleaning. Some materials cannot be exposed to mechanical friction, others - to caustic chemicals.
To clean acrylic bathtubs, choose a product labeled as such.
Cast iron will withstand cleaning by any means
The polymer coating of plumbing fixtures can be cleaned with the simplest means
A white bathtub is the most common option, despite the presence of other shades in stores. This is the color that many people associate with the ideal bathroom.
Over time, even with careful care, the surface turns yellow, becomes covered with scratches and stains, which are very difficult to get rid of. Many solve the problem radically - replace the bathtub with a new one. For those for whom this option is unacceptable, you can try bleaching the bathtub at home. This will take a little time and simple tools.
Bathtubs are made from 3 materials:
They differ not only in price, but also in other characteristics: strength, thermal conductivity, aesthetic appearance, durability. Regardless of the type, the durability of the bathtub coating depends on the quality of manufacture and operating features:
Acid, alkali and abrasive particles damage the surface: they form scratches and make it porous. Contaminants and microorganisms easily penetrate into such a coating.
The plumbing system in most cities and towns was installed several decades ago, so the water contains mineral impurities and often rust that settle on the surface of the bathroom.
Ideally, you should wash the bathtub well after each use and wipe it dry, which almost no one does. These contaminants eat into the surface, mixing with mineral deposits and making snow-white bath yellowish or gray.
Plaque and dirt on the bathtub are not only an aesthetic problem, but also a possible health hazard. Warm and humid environments are ideal conditions for the emergence and reproduction of:
To clean the bathtub, you can use special household chemicals and folk remedies.
A brief overview of household chemicals: how to whiten a bathtub with your own hands
In stores you can buy a lot of bath cleaning products in the form of sprays, powders and creams that remove existing stains, prevent the appearance of new ones (for a short period of time) and destroy microorganisms.
Abrasive products are suitable for cleaning steel or cast iron bathtubs. Cleaning occurs not only due to the mechanical removal of plaque, but also thanks to other additives that brighten the surface and dissolve contaminants.
Using abrasives is very simple: apply to a damp surface, rub with a sponge and rinse.
Powders for cleaning bathtubs are produced by domestic and foreign manufacturers, the most popular are:
Such powders easily remove almost all types of contaminants, but have disadvantages:
Unlike cleaning powders, liquid products (gels, sprays) do not scratch surfaces. The principle of their operation is based on the reaction of their constituent alkalis or acids with contaminants.
Such products act not only on the surface, but also penetrate into the top layer.
Several are popular among housewives:
Universal budgetary means in the form of a gel, suitable for the care of acrylic and cast iron bathtubs, because it does not contain aggressive components. Disadvantages include slow action and strong odor.
Inexpensive cleaning liquid designed for steel and cast iron products. The oxalic acid contained in the composition removes all contaminants, even stubborn rust and lime deposits.
Universal whitening cream medium price category. Contains optical brightener and soft granules that enhance the effect. Disadvantages: does not dissolve limescale, requires effort during application.
The spray is easy to apply and quickly removes even old plaque and rust. It contains oxalic acid, so use for acrylic products Not recommended. Disadvantages: high price and strong smell.
Contains acids (orthophosphoric and formic), suitable only for enameled and ceramic products. The disadvantage is the strong smell.
Can be used to care for acrylic. Disadvantage: does not dissolve old rust stains.
The product not only removes dirt, but also destroys any bacteria.
Removes any dirt, rust, whitens and disinfects the surface.
With its help you can remove rust and lime deposits from the surface of cast iron ( steel bath). Disadvantage - no sprayer.
Disadvantages: high price and strong smell.
How to bleach with soda, vinegar and other home remedies
You can bleach your bathtub in other ways:
To do this, apply the powder to a damp surface and rub in a little. After half an hour, you need to wet the sponge with vinegar or spray it with a spray bottle and rub the bath again. After an hour, remove the composition with warm water.
After a few hours, remove and wash the product. To clean acrylic bathtubs, use vinegar (1:5) diluted with water or a solution citric acid(50 grams per liter of water), and the exposure time is reduced to 30 minutes.
Wash off no later than after 10 minutes. This method is only applicable to cast iron bathtubs.
This product, applied for half an hour, will remove even years of plaque. This product is very caustic, so you should not use it for steel and especially acrylic bathtubs.
Add a tablespoon of soda and ammonia there. The resulting liquid can remove minor dirt from any surface.
Removes rust stains. The product is applied to the stains and left for half an hour, then washed off. This method is not suitable for acrylic bathtubs.
In the composition it is designated as additive E338. The drink is poured into the bath at night.
Another way is to fill the bathtub hot water, add 2-3 bottles of bleach and leave overnight.
After half an hour, rinse with cool water. To remove old stains, the exposure time can be increased to several hours. The product is used for cast iron or steel baths.
At home, you can remove rust and other stains with a melamine sponge.
Folk remedies remove contaminants no worse than household chemicals and at the same time have several more advantages:
Cast iron baths
Most often they are quite old; now, due to the high cost and heaviness of the material, they are difficult to find on sale. Such products maintain water temperature for a long time and muffle noise.
They are resistant to mechanical damage, so high concentration acids and alkalis, as well as coarse abrasives, including a metal brush, can be used to clean them.
Acrylic bathtubs
Differ in a variety of shapes and appearance, as well as cast iron, products from polymer material keep water warm for a long time and absorb sound.
Their only drawback is instability to mechanical and chemical influences.
Only soft products and cloth should be used to bleach acrylic bathtubs and products with a polymer coating or liner. Acetone, vinegar, soda, alkalis and acids are not used for bleaching this type of plumbing fixtures; they are cleaned by special means no more than once every 1.5-2 weeks.
Steel enameled bathtubs
They are similar in strength to cast iron, but the enamel layer is thinner. The same agents (in lower concentrations) are used for bleaching; their contact with the surface should not exceed 15 minutes.
Do not use hard sponges or metal brushes.
In any case, when cleaning the bathtub, be sure to wear strong rubber gloves and a gauze bandage. It is better to open the windows while working. Under no circumstances should you mix the 2 different means, as a result of an unpredictable chemical reaction, damage to the coating may occur.
If it was not possible to bring the bathtub back to normal, there are several options for getting out of the situation:
It would seem that buying a bathtub is the easiest thing to do, but this can hit the family budget. In addition, dismantling and installation of one bath often ends complete renovation bathroom.
An alternative is to order an acrylic liner according to the size of the bathtub. It is manufactured within a few days and quickly installed. At a minimum cost, in comparison with the previous method, you can get a new modern bath. But this method is not cheap either.
The best option for family budget- painting the bathtub. You can do this yourself, or seek the services of specialists.
Before covering the bathtub, its surface is sanded and degreased, and then filled with a new layer of enamel or glass. In the first case, you can use the product after a week, in the second after 3-4 days.
It is often easier to prevent yellowing of the bathtub than to get rid of it. For this it is recommended:
Keeping a bathtub snow-white for a long time is not an easy task; regular use of household chemicals or home remedies will help you cope with it. You need to choose products wisely, taking into account the material from which the bath is made and the degree of contamination.
How to whiten a bathtub at home: several simple and effective ways to clean a bathtub
Over time, a snow-white bathtub loses its color, becomes gray and dirty, and a brick-colored coating appears on its walls and bottom from rusty water. Many people don’t bother cleaning the bathtub and simply replace it with a new one, but for some, such a purchase turns into a serious hole in the family budget, so the issue of cleaning the bathtub remains relevant, not only with special preparations, but also with home remedies.
We list the main dangers of a dirty bath:
There are special preparations for cleaning the bathtub that can be purchased at any household chemicals department. However, you can clean the bathtub at home using improvised means that are available in any housewife’s home. Among them we can highlight:
To remove rust and lime deposits caused by high levels of iron salts in water, you must:
Compound store supplies for a bath takes into account the material of manufacture of the sanitary ware. Today the good old cast iron and metal baths are replacing products made of acrylic, glass, marble, stone, and wood. Of course, each of them has its own household chemicals that cannot be used for other types of baths and vice versa.
The danger of using home remedies is that you never know how it will behave and how the surface material will react to the impact. It’s quite easy to ruin it, but it won’t be easy to restore it.
For example, an acrylic product should never be cleaned with abrasives - soda, salt, mustard powder. There will be scratches on the surface, which will not be easy to disguise. 
Do not remove accumulations of dirt using compounds based on chlorine, acetone, ammonia and formaldehyde. Vinegar and citric acid will be the only the right decision in this case.
The enamel of cast iron and metal bathtubs is “afraid” of hard metal brushes like fire, but you can completely use homemade abrasives made from soda and salt. Before bleaching your bathtub with of hydrochloric acid or clothes bleach, it is recommended to conduct a test by treating a corner that is invisible to the eye with the solution. If nothing bad happens, use the product for the entire surface.
Many people ask the question of how to clean a bathtub with soda, especially if the product is covered with a thick layer of rust and limescale. There is a method used by our grandmothers, which is also budget-friendly and works in most cases:
As practice shows, this method makes the bathtub shine as if it had just been restored. Now you know how to clean a bathtub without resorting to store-bought products, but if you have an exclusive, expensive option, you shouldn’t experiment and try something new, it’s better to use products recommended by the manufacturer.
Whiten the bath at home - the best remedies
Every housewife dreams that her bath will always be neat and snow-white. Stains, drips and stains never decorate the interior, but only spoil it aesthetic appearance rooms. In addition, children bathe in the bath, and adults also enjoy taking a clean shower. Unfortunately, over time or due to other circumstances the surface turns yellow. And then the question arises, how to whiten the bathroom and what means to use. This will be discussed further.
First of all, let's figure out what has a direct impact on bath pollution and where it comes from.
Once you have determined the cause, you can choose a method to solve the problem. In some cases, it is enough to wipe the bathtub with a damp sponge and rinse clean water, and in some cases you will have to use chemicals.
If one of the residents already has problems with the upper respiratory tract, then inhaling spores of microorganisms can worsen the ailments. Bathing small children in affected bathtubs is very dangerous.
The market offers a wide range of cleaning powders, gels, and sprays that will quickly remove plaque and disinfect the bathtub, as well as prevent the appearance of fungus and other unwanted “guests.”
Powder products
Only steel or cast iron surfaces can be cleaned with abrasives. This procedure removes dirt mechanically, where various additives lighten the surface and dissolve the dirt.
Abrasives are very easy to use. You need to wet the problem areas and sprinkle powder on top. Then rub with a cloth and wash with water.
There are many domestic and imported powder cleaning products, the most common are:
These drugs work well with different types pollution, but they have their drawbacks:
Liquids
Cleaning products (gels, sprays and creams) do not leave scratches on the bathtub. They contain alkalis and acids, which, after being applied to objects, react and fight dirt. Here is a list of the most popular ones.
At frequent use household chemicals and plumbing equipment are subject to imperceptible destruction. To preserve its integrity, you can clean it using traditional methods.
This method is suitable for those who do not have time for lengthy cleaning. In order for the bathtub to become white and traces of rust to disappear, you still have to follow simple steps:
Oxalic acid can deal with more complex rust stains and lime deposits on enamel. It must be diluted with water to obtain a paste consistency. Next, the mixture is applied to problem areas, after which it is washed off with warm water and napkins.
So that in the future you don’t have to rack your brains over the question of how you can whiten your bathtub at home, follow some rules for caring for it:
As you can see, it is possible to return the bathroom to its original whiteness and cleanliness, but it takes some effort. Do not bring your plumbing to a critical state, stick to simple rules care for it and clean it on time, then the product will delight the eye with beauty for a long time.
0
A white bathtub is the most common option, despite the presence of other shades in stores. This is the color that many people associate with the ideal bathroom.
Over time, even with careful care, the surface turns yellow, becomes covered with scratches and stains, which are very difficult to get rid of. Many solve the problem radically - replace the bathtub with a new one. For those for whom this option is unacceptable, you can try bleaching the bathtub at home. This will take a little time and simple tools.
Bathtubs are made from 3 materials:
They differ not only in price, but also in other characteristics: strength, thermal conductivity, aesthetic appearance, durability. Regardless of the type, the durability of the bathtub coating depends on the quality of manufacture and operating features:
Acid, alkali and abrasive particles damage the surface: they form scratches and make it porous. Contaminants and microorganisms easily penetrate into such a coating.
The plumbing system in most cities and towns was installed several decades ago, so the water contains mineral impurities and often rust that settle on the surface of the bathroom.
Ideally, you should wash the bathtub well after each use and wipe it dry, which almost no one does. These contaminants eat into the surface, mixing with mineral deposits and turning the once snow-white bathtub yellowish or gray.
The color of the bathtub also depends on its age - the larger it is, the more damage and plaque there is on the surface and the more difficult it is to remove it.
Plaque and dirt on the bathtub are not only an aesthetic problem, but also a possible health hazard. Warm and humid environments are ideal conditions for the emergence and reproduction of:
These microorganisms easily penetrate the human body, causing many diseases: lichen, allergies, dermatological pathologies. Prolonged inhalation of mold spores can trigger the development of bronchial asthma. Using such a yellowish bath is especially dangerous for young children.
To clean the bathtub, you can use special household chemicals and folk remedies.
In stores you can buy a lot of bath cleaning products in the form of sprays, powders and creams that remove existing stains, prevent the appearance of new ones (for a short period of time) and destroy microorganisms.
Abrasive products are suitable for cleaning steel or cast iron bathtubs. Cleaning occurs not only due to the mechanical removal of plaque, but also thanks to other additives that brighten the surface and dissolve contaminants.
Using abrasives is very simple: apply to a damp surface, rub with a sponge and rinse.
Powders for cleaning bathtubs are produced by domestic and foreign manufacturers, the most popular are:
Such powders easily remove almost all types of contaminants, but have disadvantages:
Unlike cleaning powders, liquid products (gels, sprays) do not scratch surfaces. The principle of their operation is based on the reaction of their constituent alkalis or acids with contaminants.
Such products act not only on the surface, but also penetrate into the top layer.
Several are popular among housewives:
A universal budget product in the form of a gel, suitable for caring for acrylic and cast iron bathtubs, because it does not contain aggressive components. Disadvantages include slow action and strong odor.
Inexpensive cleaning liquid designed for steel and cast iron products. The oxalic acid contained in the composition removes all contaminants, even stubborn rust and lime deposits.
A universal whitening cream in the mid-price category. Contains optical brightener and soft granules that enhance the effect. Disadvantages: does not dissolve limescale, requires effort during application.
The spray is easy to apply and quickly removes even old plaque and rust. It contains oxalic acid, so it is not recommended for use on acrylic products. Disadvantages: high price and strong smell.
Contains acids (orthophosphoric and formic), suitable only for enameled and ceramic products. The disadvantage is the strong smell.
Can be used to care for acrylic. Disadvantage: does not dissolve old rust stains.
The product not only removes dirt, but also destroys any bacteria.
Removes any dirt, rust, whitens and disinfects the surface.
With its help you can remove rust and lime deposits from the surface of a cast iron (steel) bath. Disadvantage - no sprayer.
Disadvantages: high price and strong smell.
You can bleach your bathtub in other ways:
To do this, apply the powder to a damp surface and rub in a little. After half an hour, you need to wet the sponge with vinegar or spray it with a spray bottle and rub the bath again. After an hour, remove the composition with warm water.
After a few hours, remove and wash the product. To clean acrylic baths, use vinegar diluted with water (1:5) or a solution of citric acid (50 grams per liter of water), and the exposure time is reduced to 30 minutes.
Wash off no later than after 10 minutes. This method is only applicable to cast iron bathtubs.
This product, applied for half an hour, will remove even years of plaque. This product is very caustic, so you should not use it for steel and especially acrylic bathtubs.
Add a tablespoon of soda and ammonia there. The resulting liquid can remove minor dirt from any surface.
Removes rust stains. The product is applied to the stains and left for half an hour, then washed off. This method is not suitable for acrylic bathtubs.
In the composition it is designated as additive E338. The drink is poured into the bath at night.
Another way is to fill the bathtub with hot water, add 2-3 bottles of bleach and leave it overnight.
After half an hour, rinse with cool water. To remove old stains, the exposure time can be increased to several hours. The product is used for cast iron or steel baths.
At home, you can remove rust and other stains with a melamine sponge.
Folk remedies remove contaminants no worse than household chemicals and at the same time have several more advantages:
In the video, the woman clearly shows how she cleans the bathtub using her own method - water and citric acid.
Before you start fighting plaque on the surface of the bathtub, you need to decide on several points:
Most often they are quite old; now, due to the high cost and heaviness of the material, they are difficult to find on sale. Such products maintain water temperature for a long time and muffle noise.
They are resistant to mechanical damage, so high concentration acids and alkalis, as well as coarse abrasives, including a metal brush, can be used to clean them.
They are distinguished by a variety of shapes and appearance; just like cast iron, products made of polymer material keep water warm for a long time and absorb sound.
Their only drawback is instability to mechanical and chemical influences.
Only soft products and cloth should be used to bleach acrylic bathtubs and products with a polymer coating or liner. Acetone, vinegar, soda, alkalis and acids are not used for bleaching this type of plumbing fixtures; they are cleaned with special products no more than once every 1.5-2 weeks.
They are similar in strength to cast iron, but the enamel layer is thinner. The same agents (in lower concentrations) are used for bleaching; their contact with the surface should not exceed 15 minutes.
Do not use hard sponges or metal brushes.
In any case, when cleaning the bathtub, be sure to wear strong rubber gloves and a gauze bandage. It is better to open the windows while working. Under no circumstances should you mix 2 different products; an unpredictable chemical reaction may damage the coating.
If it was not possible to bring the bathtub back to normal, there are several options for getting out of the situation:
It would seem that buying a bathtub is the easiest thing to do, but this can hit the family budget. In addition, the dismantling and installation of one bath often ends in a complete renovation of the bathroom.
An alternative is to order an acrylic liner according to the size of the bathtub. It is manufactured within a few days and quickly installed. At a minimum cost, in comparison with the previous method, you can get a new modern bathtub. But this method is not cheap either.
The best option for the family budget is painting the bathtub. You can do this yourself, or seek the services of specialists.
Before covering the bathtub, its surface is sanded and degreased, and then filled with a new layer of enamel or glass. In the first case, you can use the product after a week, in the second after 3-4 days.
It is often easier to prevent yellowing of the bathtub than to get rid of it. For this it is recommended:
Keeping a bathtub snow-white for a long time is not an easy task; regular use of household chemicals or home remedies will help you cope with it. You need to choose products wisely, taking into account the material from which the bath is made and the degree of contamination.
Acrylic bathtubs are becoming increasingly in demand and popular. These are lightweight and convenient designs that are very quickly installed in bathrooms.
Acrylic coating has minimal interaction with environment, but nevertheless, a light gray-yellow coating gradually forms on it, and dirt gets clogged into microcracks and small abrasions.
The bathtub loses its snow-white appearance, so a few tips on how to bleach an acrylic bathtub at home yourself and with what means will be useful to many housewives.
An acrylic bathtub gets dirty just as easily as cast iron and steel containers.
After 2-3 baths, a soap coating forms on it. It should be removed immediately so that it does not dry out and become embedded in the surface layer of the coating.
If the film of contaminants is thin and fresh, then you can wash it off with simple hot water and washing powder. To do this, after 2 - 3 baths, you should walk with a thick kitchen sponge over the surface of the bath, carefully scrubbing the most problematic areas and wash off the dirt with water.
In addition to the powder, you can use:
After the dirt has been removed, you need to wipe the surface of the bath with a piece of dry, soft, clean cloth or a microfiber cloth. Such manipulations are enough to make the acrylic container snow-white and shiny.
If it so happens that the dirt on the surface of the acrylic bathtub was not removed for a long time and had time to dry, then in such cases you cannot do without household chemicals designed specifically for cleaning bathroom surfaces and bleaching acrylic.
The following domestic and foreign products are available for sale for these purposes:
These are sprays, creams or liquids that are classified as medium-impact products. They allow you to quickly remove even clearly visible dirt.
To do this, it is enough to spend 1 time in 2 weeks general cleaning your bath. You need to wet the container with hot water, apply 1 tablespoon of creamy or liquid product or spray the bathroom walls with spray.
Leave them for 10 - 15 minutes, then use a brush to vigorously scrub away all accumulated dirt and rinse with plenty of water. This is quite enough to give the bath a snow-white look.
You can also find bleaching agents for acrylic in the kitchen. The simplest of them is an aqueous solution of citric acid. The liquid successfully fights not only soap, but also limescale and rust stains.
To make bleach, dilute 1 - 2 packs of citric acid in 1 liter of hot water (the concentration of the solution must be selected depending on the degree of contamination).
To remove dirt, wet the entire surface of the bathtub with liquid and wait 1 tsp, and then clean off the soaked residue. in a circular motion sponge and rinse with water.
Individual small stains of dirt can be rubbed with lemon juice - the result will be no worse. You can also prepare the following product to whiten an acrylic bathtub:
All components should be mixed well, close the drain in the bath and spray the liquid along the walls of the container. Leave for 0.5 tsp, and then, as usual, brush along the walls and bottom of the bathtub being treated, rinse off the deposits with hot water and wipe the surface dry with a clean, dry cloth.
Acrylic is a durable plastic, but it scratches easily and is susceptible to sharp impacts. Therefore, when cleaning the bathtub, it is prohibited to use cleaning powders containing abrasive insoluble particles.
You should also not use hard metal brushes for dishes, as this may cause a network of microcracks to appear on the surface and the acrylic coating will no longer be perfectly smooth and even. Therefore, it is best to clean the surface with a washcloth or foam sponge.
The use of aggressive liquid bleaches, which include:
Therefore such popular means like “Whiteness” and “Domestos” it is better to keep away from acrylic bathtubs. But you can clean them with any oxygen-containing bleaches.
