The proposed drawings of knives with dimensions show that each product is individual, it is unique, and good “in its own way.”
We decide on the shape of the product.This?
Or this one?
Drawings of knives with other sizes can be found in the article
A hunter definitely needs a gun and a knife. If there are no questions about the application of the first, then there are different opinions regarding the second. Some believe that a knife is necessary for finishing and cutting up a shot animal, as well as for protecting against an attack by an animal.
Others use this item, first of all, to chop branches, cut bread, open cans of canned food and perform various household work, but cutting up game is an occasional task. Thus, it turns out that there is no universal blade. Any man can create hunting ones.
Hello, friends!
Today I want to talk about how to make different shapes and designs of knives. It is known that a knife is not only a melee weapon and an indispensable hunting paraphernalia (I deliberately do not mention kitchen utensils as a household necessity) but also an integral part of our historical past, its pride and beauty.
Basically ordinary sharp piece iron has no value. If you simply sharpen a steel plate, then it will remain an ordinary sharp steel plate, a soulless instrument for cutting living and inanimate flesh. The value of a true work of art lies in the soul that the master put into his product. And this concerns not only edged weapons, but also any other human activity. Every thing made with love and inspiration contains a piece of the soul of the person himself and therefore it itself is a little alive. The ancient masters knew this well and gave their creations names, treating them as some kind of living substances.
In our technologically advanced times, everything is put into flow: part to part, screw to screw, and we get an extremely necessary, but completely soulless product. However, some are irrepressible creative personalities, are still making living things. I hope you, the readers of this article, are one of them. Below I have posted drawings of knives of various configurations, according to which you can make your own “living weapon”. What material to make weapons from has already been discussed a lot on this site, in articles, etc., but perhaps someone has their own suggestions.
And so in these drawings only general dimensions: length, width and height, do everything else to your taste, I just want to show what shape can a knife be made?. I know one person who is simply obsessed with. Over the course of twenty years, he had accumulated a huge collection, ranging from rough and clumsy first crafts to simply amazing beauty, I am not afraid of this word, masterpieces. Moreover, this man, no matter how much he was asked, did not sell a single knife, and categorically refused to make it to order.
Now he is already retired, all the walls of his apartment are covered with stands on which his homemade favorites are placed. Sometimes he takes some kind of knife and examines it for a long time, at times he whispers something and strokes it. Don't think so, he's not crazy, he's a normal, cheerful and talkative old man. It’s just that he probably really animated his knives and treats them as living creatures, but frozen in space and time.
Making the perfect edged weapon at home is difficult. To do this, you will need accurate drawings with dimensions. Throwing knives are made of durable metal, which takes a long time to sharpen to get a truly sharp product.
Otherwise, it will simply bounce off the target rather than sink into it. In addition, it is necessary to select good material for the handle so that the tool fits comfortably in the hand.
To make a throwing knife with your own hands at home, you must first decide on the type of weapon and what shape the blade and handle will have. It is also worth taking care of the material, tools and special equipment that will be needed in the process. The list of necessities includes:
The production of a knife has its own characteristics, since main function products - to inflict piercing blows, so the tip should be smooth and straight. It is the shape of the blade that plays a big role.
Steel is most suitable for a homemade knife, but if the sheet from which you plan to make the workpiece has unevenness and a large thickness, then forging will be required, for this you will need a blacksmith specialist. He must make the plates required thickness. Otherwise, it will be impossible to get a perfectly level weapon. Metal forging carried out under the influence high temperature. If this procedure cannot be carried out at home, then you can ask the help of factory blacksmiths.
During the forging process, you need to obtain an even steel plate, the thickness of which should be no more and no less than 4 millimeters. The fact is that during the manufacturing process, “sinks” are formed on the product, which must be eliminated by grinding. This is why the process must be carefully monitored, otherwise the weapon may lose most of its thickness.
After finishing the work it should be steel product, the parameters of which exactly correspond to the dimensions of the future throwing knife.
Upon completion of forging, they are determined with form of bladed weapon. You can make a throwing knife at home with grooves, protrusions, or make holes in them. But experts advise against additional elements and intricate shape, especially if the product is being made for the first time. The finished blade should fit comfortably in the hand, but not be too large or, conversely, very small.
Even the most ideal throwing knife will become ineffective if it has an uncomfortable handle. The fact is that it is this part that is responsible for the quality of the throw. Whether the blade will fly in the right direction or not, as well as whether your hands will get tired, depends entirely on the handle.
The material used to make the handle must be durable and pleasant to the touch. It should not absorb blood or freeze to the skin in cold weather. Basic requirements for material quality, the following:
Wood is considered the ideal raw material for making a throwing knife handle; it is quite simple to find and easy to process, creating a reliable and attractive handle. Blanks are made from dense types of wood; maple, ash and apple are especially good for this. Conifers It’s better not to use it, but you can take burls (growths) from birch trees.
In preparations they do small holes for attachment to the shank. If you plan to mount a handle that will slightly extend beyond the blade, these holes must be made through. In this case, the handle should be slightly larger in diameter than the shank so that the latter can easily fit inside and not split it. Holes in the rectangle are made at the stage of connecting the handle and blade. This is due to the fact that the transverse dimensions of the shank can change during the manufacturing process.
You can collect birch bark yourself. Work begins by twisting the material using a nut, which is gradually screwed onto the thread located at the tip of the shank. As necessary, you need to add these wooden plastics and do this until the birch bark forms one dense and solid briquette. In this case, threads should remain under the nut.
The material itself needs to be prepared. For this purpose, birch bark undergoes special treatment: the wood is kept in hot water for two hours, after which it becomes softer and much easier and more convenient to work with. After cooking, the birch bark is thoroughly dried naturally, and when dry they are cut into small rectangular plates.
Now you need to take a sharp knife and a file and give the handle the desired shape. At the very end, the finished handle must be sanded using fine sandpaper. But it is undesirable to use varnishes and paints. So in a simple way You can make your own throwing knife. The drawings will make it easier to select the required shape and exact dimensions.
In addition, the handle is additionally equipped with a special single limiter, which prevents the hand from moving onto the blade. It is fixed directly in front of the handle. A more simplified option is to mount small protrusions on the handle, which protect your hand from possible cuts.
Hunting blades are made according to this scheme, so they are more convenient for skinning prey.
Each homemade knife differs in length, shape and material from which it was made. It is worth noting that purchasing edged weapons intended for hunting is quite difficult, since you must have a permit. Of course, you can order it online, but, as practice shows, the product arrives of poor quality: the point is dull, the handle is uncomfortable.
But at homemade instruments there are many advantages, the following can be noted positive traits:
The manufacturing process of any type of knife is carried out using similar technologies, and if you follow all the rules and recommendations, then the homemade blade will turn out like a factory one. But it is worth considering that in factories everything is done by machines; at home you will have to do the process yourself. First you need to take care of the tools that you will need during work.
A standard throwing knife has with the following parameters:
All these parameters are transferred to cardboard, and an accurate drawing is made from them, taking into account that the scale is 1:1.
Then, they cut out the design and apply it to the steel plate, moreover, it is necessary to do this in such a way that there are no “shells” in the area where the blade is located. They trace the pattern, after which a well-circled blank of the future edged weapon should be obtained on the metal. Now all that remains is to carefully cut out the steel product using a hacksaw designed for working with metal.
To get a comfortable and high-quality knife when cutting, you need to leave a small margin; leaving 2-3 millimeters will be enough. Then you can bring the edges of the blade to full readiness. As a sharpening material, you can use emery blocks, files and other suitable devices. At the end of the process, you should get a steel blade at least 4 centimeters thick.
After this, they begin more labor-intensive work - grinding the blade to a certain thickness. To do this correctly, it is necessary to place the workpiece in a vice, clamp it securely, and the clamping should occur in the area of the narrow edge of the product. That is, the thick side of the workpiece should face the master.
It is most convenient to start turning from the top side, and then gradually move to the opposite side. It is worth noting that this process takes a lot of time and effort, so you need to prepare for it. The result is an excellent throwing knife with a thin, light and sharp blade.
It is worth adding that accuracy at this stage is not necessary; it will be enough to sharpen the blade to an approximate thickness. All inaccuracies can be removed later, so you shouldn’t worry too much about any discrepancies.
After the blade has been ground to the required thickness, they move on to the next stage - sharpening the steel plate. The best knife for throwing can only be obtained if the technology is followed. All actions are carried out from top to bottom, while the sharpening itself is carried out only to the middle of one of the narrow edges of the blade.
Triggering movements are made strictly to the width of the entire file and in such a way that it passes only along the ground side of the knife. After one side is made, proceed to the other, doing the same manipulations.
After both sides have gone through the striking procedure, you should get a knife, but its edge will not be sharp, since the descent was carried out only to the middle, that is, the sharpening points were not connected. Now the second part is processed using an emery block. To do this, you need to grind one side and the other in turn.
The result should be a sharp blade. The nose is ground not only from the side, but also from the top. At this point, the production of a metal knife is considered complete.
At this stage it is necessary to connect the prepared parts. The handle of a bladed weapon can simply be placed on the shank or secured with special elements - rivets.
In the first case, the product will have a more attractive appearance. Since the shank is made in the form of a thin rod, it often extends beyond the handle. You can correct the situation using the following scheme:
This fixation option allows you to make a base from a set of individual rings. The structure will be closed by a special knob nut. It can be made decorative if desired. If the shank is small in size, it can simply be inserted or glued.
Knives are currently popular not only in the kitchen, but also among people who have connected their lives with extreme types of active leisure - fishing, hunting, tourism, etc.
On the market today there are various knives: variable models, different dimensions and designs. But none of them can replace a knife that you make yourself.
People often write on the Internet about how to make a knife with your own hands, but you have to try hard to make them.
In the photographs of the knife on the Internet, you can see that each product is a creative element created from various mechanisms.
There is a large classification of knives depending on their functionality: combat, tourist, folding (for example, butterfly), knives designed for hunting, multi-tools, bivouac knives, as well as ordinary kitchen knives.
Kitchen knives are bought ready-made, but knives intended for hunting or tourism can easily be made at home yourself.
There are also knives such as survival knives, the main task of which is to help in living in conditions wildlife. This option is relevant for tourists and hunters.
The blade of such a knife is usually no more than 12 cm. This length is sufficient for cutting wood, processing game, cleaning fish or other similar actions. Small dimensions make this knife easy to transport.
When making such a knife, great attention should be paid to the material intended to create the blade. Steel is often preferred.
To get a positive result when making a knife, you should first sketch out a drawing of the knife. In this case, you can know in advance what exactly you want to achieve in the end.
Instructions on how to make a knife at home include a number of rules.
Cut out the blank for the future knife. Relying on finished drawing, cut out the shape for the knife.
You will need a knife sharpener. With its help, the base is brought to the required shape. And after this you will have a clear blank in your hands, where you can distinguish the places of the handle and blade.
Rough sharpening of knives. At this stage you need to clearly know what your future knife is intended for. If it is made for hunting, fishing or hiking, then it is better to give preference to the blade type of sharpening.
And, if a knife is created to function in the kitchen or in the garden, then a razor type is suitable.
Don't expect perfect sharpening at this stage, as this is just a rough draft intended to determine the future shape.
If the blade is pre-prepared, then you can start working with the handle. To create the handle, the most various materials– this is: wood, plexiglass, bones, thick types of leather, etc.
Having cut out a blank to create a handle, you should check whether it fits comfortably in your hand, as well as its proportionality relative to the blade. The knife handle is secured using the riveting method.
The shape for the foot handle is given using a sharpening machine.
The knife is ground and polished using sandpaper.
The final sharpening of the blade is carried out after sharpening on a sharpener, also using sandpaper.
At the end, the finished knife is polished with velvet cloth or polish.
As you can see, the process of making a knife with your own hands is not that difficult, so everyone can try their hand at this area.
You can also give the future knife the necessary and desired design. Special attention pay attention to the handle during the design process.
Because it is by the handle of the knife that others can then judge your creative thinking and status.
Some write their names on the handles of the knife, draw certain patterns and sketches in the form of tattoos.
The simplest knife can be built in an emergency in the forest; the main thing is to find the materials necessary to create it.
You just need to find the cutting part for the knife, and then you should insert it only into the handle, which will be in the form of a piece of wood, rope or leather.
Hello, friends!
Today I want to talk about how to make different shapes and designs of knives. It is known that a knife is not only a melee weapon and an irreplaceable hunting paraphernalia (I deliberately do not mention kitchen utensils as a household necessity) but also an integral part of our historical past, its pride and beauty.
In principle, an ordinary sharp piece of iron has no value. If you simply sharpen a steel plate, then it will remain an ordinary sharp steel plate, a soulless instrument for cutting living and inanimate flesh. The value of a true work of art lies in the soul that the master put into his product. And this concerns not only edged weapons, but also any other human activity. Every thing made with love and inspiration contains a piece of the soul of the person himself and therefore it itself is a little alive. The ancient masters knew this well and gave their creations names, treating them as some kind of living substances.
In our technologically advanced times, everything is put into flow: part to part, screw to screw, and we get an extremely necessary, but completely soulless product. However, some irrepressible creative individuals are still engaged in making living things. I hope you, the readers of this article, are one of them. Below I have posted drawings of knives of various configurations, according to which you can make your own “living weapon”. What material to make weapons from has already been discussed a lot on this site, in articles, etc., but perhaps someone has their own suggestions.
And so in these drawings only general dimensions are given: length, width and height, do everything else to your taste, I just want to show what shape can a knife be made?. I know one person who is simply obsessed with . Over the course of twenty years, he has accumulated a huge collection, ranging from rough and clumsy first handicrafts to simply amazingly beautiful, I’m not afraid of this word, masterpieces. Moreover, this man, no matter how much he was asked, did not sell a single knife, and categorically refused to make it to order.
Now he is already retired, all the walls of his apartment are covered with stands on which his homemade favorites are placed. Sometimes he takes some kind of knife and examines it for a long time, at times he whispers something and strokes it. Don't think so, he's not crazy, he's a normal, cheerful and talkative old man. It’s just that he probably really animated his knives and treats them as living creatures, but frozen in space and time.
.jpg)
