Even the smallest body of water can decorate your own summer cottage and give it some zest. And a fountain made with your own hands will not only become a favorite place to relax and provide aesthetic pleasure, but will also become a reason for compliments from invited guests.
But not everyone decides to build this mysterious hydraulic device with their own hands. Some summer residents mistakenly believe that building a fountain is a labor-intensive and expensive process and cannot be done without the help of specialists. But every lover of spending time in nature can give themselves such pleasure; the main thing is to know all the nuances of constructing a fountain with your own hands.
There are two types of fountains based on the type of design.
By design, pumps that act as fountains are divided into submersible and surface (stationary).
Picking up comfortable spot For the construction of a fountain, it is recommended to take into account the degree of slope of the ground. If the area is uneven, it is better to place such decoration in a low area. This option for the location of the reservoir will not only allow you to adjust the volumes groundwater, but will increase the oxygen saturation of the air.
The fountain must be positioned in such a way that it is not an obstacle to other buildings and is visible from all points. It is recommended to place the structure near the resting place.
The minimum distance that must be maintained between the fountain and plants, buildings, and furniture is 50 cm. This way, the plants will not die from excess moisture, and the furniture will not become unusable. Perfect option for the location of the fountain - partial shade and a place protected from the wind, located close to a source of water and electricity. This arrangement will save you from unnecessary wires and additional work on their insulation.
Having decided on the location, it’s time to think about the shape and depth of the future fountain.
To build a fountain in order to save money and effort, you can use construction technology decorative pond with its pump equipment.
Materials required to build a fountain:
If you plan to build a miniature fountain, you can use an ordinary plastic basin or any other small container as a reservoir.
For large bodies of water, old bathtubs or a self-dug pit are suitable. If a bathtub is used, it is necessary to dig a hole of such a size that its edges are not higher than the surface of the ground. All holes in the bathtub are securely sealed, after which it is lowered into the pit and strengthened with earth, stones and sand.
For a homemade tank, make a hole of the required depth and cover it with a thick, high-quality film, which is secured along the edges on the surface with stones. Stones of various shapes and sizes are also poured onto the bottom. It is important that the stones do not have sharp edges and cannot cut the film. The stones are evenly distributed along the entire bottom of the future fountain.
In order to construct a fountain on your site yourself, it is not necessary to purchase expensive materials; you can adapt any old elements. However, you should not spare money - the pump, the better quality it is, the more beautiful the fountain will be and the longer it will decorate the area without causing problems.
Submersible pump - best option for the construction of a fountain on a summer cottage. It works on the principle of a centrifuge. You can also install a surface pump; it is mounted at the edge of the reservoir, but is most often used on large fountains and cascading reservoirs.
When choosing a pump, you should take into account the pressure that is constantly present in the pipe and the differences in this pressure. Therefore, purchasing the most powerful pump may not be justified, since not in all cases it will be able to work out its full power.
Regardless of which type of pump is chosen, it is important to remember that its power must be related to the diameter of the pipe. The fountain jet should come out under powerful pressure, and not slowly flow out of the pipe, since there will be no effect from such a design.
The construction of a fountain includes several main stages:
To build such a fountain you will need:
Stages of work:
For such a fountain you will need to prepare:
Stages of work:
For this version of a country fountain you need to prepare:
Stages of fountain construction:
For this sprinkler you will need:
Stages of constructing a fountain:
This option is perfect for watering your garden.
To build such a fountain you will need:
Construction stages:
You can emphasize the uniqueness of a hand-made fountain by decorating it. It is recommended to lay out beautiful, colorful stones of different sizes around the pond, put flowers in pots, place cute figurines of animals, birds, etc.
To make the fountain amaze with its beauty and unusualness at night, you can backlight it using special equipment. Lamps installed around the perimeter of the fountain and lighting at its bottom will create a fabulous, magical atmosphere.
The bottom of the reservoir can be landscaped with the help of special plants, and bushes can be planted around the fountain.
Any country pond and fountain, including one, needs careful care. To maintain order and clarity of water and a pleasant spring appearance of the structure, it is necessary to regularly clean the tank. Using special devices, it is necessary to remove leaves, seeds, fluff and other objects from the surface of the water that can not only spoil the appearance of the reservoir, but also cause the fountain to malfunction.
At the end of the summer season, it is necessary to drain all the water, transfer the removable parts of the structure to closed room, and cover the remaining parts and the bowl with film to prevent dirt from getting into them.
Building a fountain with your own hands in a country house or even in an apartment is not difficult and does not require large financial resources. Before building a decorative fountain, you need to decide on the shape, size and installation location. There are many options for the location of such structures - near the gazebo, on the lawn, in the garden. After constructing a fountain, you need to carefully monitor the purity of the water, regularly remove debris and add water, as it will evaporate.
Such designs are widely used in the design of suburban areas. Fountains can decorate any ownerless area or become a highlight summer cottage. And by adding imagination and decorative elements, you can make it even more beautiful and unusual.
Fountains are not only cool on a sunny day. This is also positive energy spreading throughout the house from the sounds of rushing water.
Many people want to surround themselves with artificial ponds or at least small fountains so that they can relax and unwind next to them after work. You can do all this yourself: just learn how to make a homemade fountain with your own hands and build it, quite quickly and efficiently. And just such a fountain, created with your own hands, will become an exclusive decoration of your site and home!
All fountains can be divided into fountains intended for indoors or outdoors. The first type includes indoor fountains. They are used rather for the purpose of decorating the interior of the house and can be different in shape and size, depending on the parameters of the room.
Outdoor fountains are designed to decorate a personal plot. They are placed on the site in front of the house or in the garden. They can be made of plastic, natural stone, marble, porcelain.
In addition, such a fountain can be equipped with lighting, and then you can admire it not only during the day, but also in the evening and at night. A festive atmosphere is guaranteed with such a fountain!
Many people ask themselves the question - how to make a fountain in the country? Before you start arranging this hydraulic structure, you need to decide on the desired model. Its appearance directly depends on general style plot. So, if the dacha in rustic style a fountain in the shape of a mill is perfect, and for an area in classic style It is better to build a fountain with a minimum of decor or in the form of a statue.
If your dacha resembles a picturesque corner of nature, you can make a small fountain, reminiscent of a geyser, gushing directly from under a stone. You can also place the fountain near an artificial pond surrounded by boulders.
Many lovers country life They are tormenting themselves with the question of how to make a simple fountain on their site. To do this, the fountain pool is buried in the ground, and a special recess is made at the base for all the equipment and the pump.
The main advantages of such a fountain are its elegant design, shallow depth and convenient built-in overflow-drain system. However, there are also disadvantages - high costs when installing the pool itself, cables and fittings. If you decide to make a fountain at home and settle on this particular type, arrange it so that each element pleases the eye and creates a feeling of harmony and peace.
Before you begin installing the fountain, you need to acquire materials: a beautiful fountain is unlikely to come out of nothing. The choice of materials for the fountain depends on the place from which its arrangement begins. It is better to use a small reservoir on a summer cottage to build a fountain, and then before making home fountain, you won’t have to think about water drainage. If you already have a reservoir, then for work you will need:
The most crucial moment is the choice of pump. Modern market offers electromagnetic, centrifugal and vortex pumps. For country fountains it is recommended to use centrifugal pumps, since they are more powerful, but at the same time quite economical. If there is no reservoir on the site, you need to dig a pit and equip it with artificial pond, equipping it special film And concrete block on which the pump will be placed.
The organization of a country fountain requires careful planning. In order to understand how to make a fountain with your own hands, you need to correctly calculate the location of the future structure, its proximity to power sources and water supply.
Water from the fountain can be drained down the drain into the sewer, or it can be recycled - reused, which significantly saves the process. When preparing sewer channels for draining water from the fountain, a rainwater inlet may be used.
If there is a ready-made bowl for the fountain, a pit is dug for it. Otherwise, they also dig recesses and equip it like a small pool: drainage in the form of sand, strengthening the walls, waterproofing layer, sewer connection.
The construction of the fountain itself begins with the installation of a pump. It is important to remember that there is an underwater and above-water position for fountain pumps, with the above-water pump being more often used for larger fountains as it produces a higher, stronger jet. It is also necessary to ensure that the electrical wiring is well insulated. The fountain itself is usually installed in the center of the pond so that water does not spill beyond its boundaries.
The uniqueness of a homemade fountain can be emphasized by decorating it. How to make a fountain at home so that it becomes a decoration of the yard both day and night? This is possible thanks to the effect of artificial illumination of the fountain using special lighting equipment. Lamps that illuminate the fountain around the perimeter and even in the water will help create a fabulous harmony of water and light.
You can also plant bushes or flowers around the fountain, and the bottom of the reservoir itself can be landscaped with the help of various aquatic plants. The fountain can be decorated with wood, stone or statues.
When equipping a fountain, you can use ready-made statues and figures. But it depends on you how much a standard fountain will become exclusive.
Any apartment interior can be enlivened with the help of a small fountain. Before starting work, it is better to figure out how to make an indoor fountain with your own hands and think through all the nuances. To implement this idea you will need the following materials:
First you need to find a container in which the fountain will be located. For this purpose, you can use any vessel you like, for example, a flower pot. You can also choose a beautiful flower pot or basin for a fountain, the main thing is that the water does not leak out.
In addition, you need a pump with a sprinkler and without a tip, since the container for the fountain will be small. The main task of the pump is to raise the stream of water.
Stages of construction of a decorative fountain:
A cool fountain on a hot summer day improves your mood and invigorates. In such a situation, even a small fountain will be a lifesaver for you. How to make a mini fountain? This is quite easy, you just need to stock up on the following materials:
Stages of work:
Thanks to this scheme, anyone can make a mini fountain with their own hands, using their fantasy and imagination.
One way to make even an ordinary fountain magical is to use lighting. It could be:
With underwater lighting, the effect of water glow is created; if the lighting is rotating, then the whole process turns into a water-light extravaganza. A rotation mechanism is used for this.
An important stage of lighting equipment is laying the wiring in a water-repellent busbar. For safety, it is equipped with an automatic breaker (in case of current leakage). To comply with safety precautions, when installing fountain lighting, lamps with a voltage of 12 Volts are used. These are primarily halogen lamps, and lamps based on fiber optics and LEDs. Connect the lamps to the network or transformer.
If you want to illuminate the water surface, place the lamps around the perimeter above the water. If you want to emphasize some element of the composition, use a directional beam of light, if the entire composition is a spotlight. Using spotlights, you can focus attention on one detail, for example, a group of plants in a pond.
Fountains have always decorated any interior. Today they are widely used for the purpose of decorating premises and ennobling personal plots. Therefore, they are widely used in landscape design. A fountain on the lawn, near a gazebo, near an artificial reservoir surrounded by rock gardens - there are many options for the location of fountains. They can occupy any free space or become a central place in the design. garden plot. By giving free rein to your creativity, you can figure out how to make the fountain not only beautiful, but also unusual.
Even if the pond on your site is small, it can make a good contribution to the improvement of your territory. And if you decide to build a fountain with your own hands, it will be interesting. This will not only be a place for leisure, but you will also receive a mountain of praise from friends, acquaintances and neighbors.
However, not everyone wants to take on such an idea, because they think that the construction of such a hydraulic device is very expensive and labor-intensive, and also requires the intervention of a specialist. If you want to know how to make a fountain at home, then we want to please you that anyone can afford to build a fountain with their own hands at home, you just need to know all the aspects of design and construction. In this article we will look at how to make a fountain.
Due to the type of construction, products are divided into two types:
Multi-level fountain Based on the type of pump, fountains are divided into submersible and stationary.
When choosing optimal location for construction, it is important to take into account such a factor as the slope of the ground. If the surface on the site is uneven, then it is better to install the structure at the bottom. This will make it easier to adjust the volume of groundwater, and will also increase the oxygen saturation of the air.
Install the fountain where it will be convenient to admire it It is not recommended to build a fountain:
The fountain must be placed so that it does not interfere with movement around the yard, but on the other hand, so that it can be clearly seen from different sides. We advise you to place it near the place of leisure.
The smallest distance that should be between the structure itself and green spaces is 0.5 m. Thus, the plants will be protected from large quantity moisture. The same principle applies to furniture near a water feature. The most optimal location structures - a place in the shade and without wind, near water and an electrical network. This way your efforts will be saved and material costs.
After we have decided where the fountain will be, we can begin its construction or what the shape and depth of the building will be To save money and power costs, it is possible to build a pond with a pump placed in it.
Materials for building a fountain:
In the case of a small fountain, a regular small basin can serve as a reservoir. For a larger option, you can use a bathtub or a pit dug by yourself. When using a bathtub, you need to dig a hole so that its edges are below ground level. First, all the holes in the container are closed, then it goes down into the hole, where it needs to be strengthened with stones and earth.
If you want to dig your tank, use film for this. It, in turn, must be dense and of high quality. In a dug hole, the film is pressed against stones. Stones also line the bottom. They should not be sharp, as this may damage the film. They need to be distributed equally over the entire bottom.
To build a fountain, it is not necessary to buy expensive materials, since you can use elements used on the farm. But you don’t need to save on buying a pump, since the quality of the pump determines how long it will work without problems, and the more beautiful the end result will be.
Most optimal choice for the construction is to use a submersible pump. But if you have a large or cascading fountain, installing surface pump The main indicator when buying a pump is its power. If the water pressure in your fountain is low, then you do not need to buy a powerful pump. It is important to know that the power corresponds to the diameter of the pipe, and the pressure must be strong, otherwise it will be the result of an unsuccessful fountain.
The construction of the fountain consists of five stages:
Now let's look at some options for building a fountain with your own hands.
For this we will need
Tire fountain covered with stones Sequencing:
For this type of fountain you will need:
Fountain in a pond made of film Sequencing:
For this case, you need to have in stock:
Fountain from old bath Sequencing:
For such a fountain, so to speak, you need to have:
Practicality in everything! Sequencing:
This mini fountain is suitable for watering your vegetable garden.
For this we need:
Fountain from a flower pot Sequencing:
Decorating your fountain will further highlight how unique it is. You can put natural stones next to the pond, you can even different colors, expose houseplants, put various figures of toys or animals, etc.
Illumination of the structure can amaze your guests with its originality. This is done using special equipment. Lamps are placed around the perimeter of the structure, and lighting is installed at the bottom.
Plants and decor for the fountain At the bottom of the reservoir you can place aquatic plants, and plant shrubs around it.
After you make a fountain at home, it will, of course, need to be well looked after. In order to maintain order, the water to be clear, and the building to have a pleasant appearance, it is important to constantly clean the container. Using special devices, you can remove leaves and similar things from the pond that can spoil the water and also damage the equipment.
When the summer season ends, you will need to drain the water from the reservoir, remove the equipment into the room, and cover the rest with oilcloth to protect it from dirt.
Making a fountain with your own hands on a summer cottage or in your apartment is not so difficult and does not require large material expenditures. Before erecting a structure, you need to find out what its shape, size and location will be. You can place it anywhere - in your garden or near the gazebo. Subsequently, the fountain needs to be well looked after - monitor the cleanliness and water level, and also remove fallen leaves.
This type of structure is often installed in summer cottages. A fountain can decorate any free area or become its oasis. If you use your imagination and use various elements decor, the fountain will look even better and more original.
Every owner of a suburban area strives to make his home and the space around it as comfortable as possible and at the same time beautiful. After all, a well-designed landscape design is not only a decoration of a summer cottage, but also harmonious combination different zones in one area. How good it is after working day dine in the gazebo with your family or, in the hot summer, relax on a bench enjoying the coolness of the fountain. This is exactly what we will talk about in our article, and more specifically, how to make a fountain with your own hands.
Most would agree with the statement of psychologists that the sound of water has a calming effect on the nervous system. A person watching the flow of water internally relaxes and gains emotional balance. You can sit by the fountain for hours, watch its play and splashes, and think about your own thoughts.
There is nothing complicated in the design, so almost anyone can install a fountain in their dacha with their own hands - you just need to have the desire and the necessary materials. We will also consider the latter in our article. 
The incomparable advantage of the fountain is that it can be an excellent addition to the landscape design of any suburban area. In addition, a homemade fountain with properly selected lighting will become your guests’ favorite relaxation spot.
Depending on your preferences and overall style landscape design The design of the fountain is also selected, just take into account the size: if the area is small, then it is better for you to install a small garden fountain with your own hands. 
The device uses the principle of circular water supply. In other words, initially a certain amount of water is poured into the reservoir (bowl), which, using a pump, then circulates throughout the entire structure. There is a nozzle above the surface of the bowl, to which water is supplied. To prevent the bowl from overflowing, a special device is installed in it to regulate the amount of water.
This is a generalized diagram that describes the simplicity of the design. Therefore, having installed a fountain in your dacha, you don’t need to think about the fact that water consumption in the area will increase. Just fill in the required volume of water once and from time to time just check the degree of contamination. Even though the pump has a filter, the water should still not be too dirty. 
Of course, before installing a fountain with your own hands, it is necessary to at least visually determine the most appropriate place for him. Better yet, draw a plan in order to have a specific idea of the location of the structure and take into account all the nuances in advance. We offer you several practical advice by choice of location:
VarietiesSurely many have noticed that the fountains differ in appearance not only in design, but also in design. Some are made in the form of reservoirs with nozzles, others are on a stand in the shape of jugs, statues and other devices from which water flows.
Accordingly, fountains come in two types:
The first option has simple design and is often found on suburban areas and even in houses. To make a similar home fountain with your own hands, you will need a bowl, plastic pipe, pump and nozzle.
Stationary have more complex design and pompous appearance. Such devices can often be found in city parks and squares. For this option, you already need to lay a foundation, since the body is made mainly of stone or marble - durable materials resistant to aggressive weather conditions.
For large plot an area of ten to twenty square meters A large stationary fountain is suitable, but for a small area it is best to install a submersible one. Well, the style of landscape design also dictates its own rules: for Japanese garden, for example, a submersible type is suitable.
As we noted earlier, design style also plays an important role. After all, all elements of landscape design should complement each other and be in harmony with each other. The most common option is the classic submersible jet fountain. Its construction does not require large financial and physical costs, and it will look advantageous in any design. Especially if you want to complement an artificial pond with it. If you want to see options for what do-it-yourself fountains for a garden might look like, we presented a photo of the idea at the end of the article. 
The shape of the bowl is most often symmetrical - it is either a circle or a square. You can put it around the edges decorative rock or pebbles, add greenery. Only the plants must be moisture-loving, otherwise the appearance of the composition will be hopelessly spoiled by rotting plants. 
Before you make a decorative fountain with your own hands, you should take care of the materials and tools for construction in advance. If you want to make a stone fountain, then you will need the following materials:
In accordance with the above materials, you will need the following tools:
Depending on the desired decoration method, you may need Additional materials and tools. Here you can get your bearings on the situation or make a list of necessary items for work in advance, so as not to be distracted during the process. 
Undoubtedly, the main and important detail The whole structure is a pump. If you are a beginner and don’t yet know how to build a fountain at your dacha with your own hands, listen to our advice: you need to approach the choice of pump thoroughly. First, consider the volume of the bowl - the larger it is, the more powerful the pump will be required. The presence of a filter will protect it from various debris and extend its service life. 
There are two types:
The first type is installed on the surface, but in no case above the water level. The principle of communicating vessels works here.
It is advisable to install the submersible pump not at the very bottom of the bowl, but at some elevation - then sediment will not fall into the filter. Keep in mind that the pump will consume electricity, so make the necessary communications in advance and provide a shield for safety. 
Even if it is not possible to install electric pump, don’t be upset - next we’ll tell you how to make a fountain in your dacha without one.
Out of stock submersible pump, you can make an open fountain. If you have a well with a pump on your site, you can remove this water through a pipe into a fountain. The only thing you will need to decide is where the water will flow - for example, you can simultaneously turn on the fountain and water nearby plants.
Thus, you can create mini fountains for your garden with your own hands at several points on your site. 
Of course, you shouldn’t forget about the end result of your work. Appearance finished design should please the eye, and the lighting will allow you to enjoy the beauty of the fountain in the evening. We offer you some decorating tips:
We invite you to see how beautifully decorated garden fountains are with your own hands, photos of which are below.
There are many photographs of country fountains on the Internet, and methods for their construction are described. You can also find enough information on how to make a home fountain with your own hands. Yes, yes, such mini-devices look very original and complement the interior. Such designs are especially popular among supporters of Feng Shui. Of course, the process of their construction is much simpler and cheaper - and their dimensions are quite small. 
If you still have a desire, but don’t know how to make a fountain at home, we will help you make a choice and give you a few useful tips:
And, of course, you shouldn’t forget about maintenance - with the onset of cold weather, you need to turn off the fountain, drain the water from it and cover the entire structure with film until it warms up. In this case, your little country oasis will delight all household members and guests with its joyful murmur for many years to come.
We present to your attention a successful selection of 30 photo ideas for do-it-yourself fountain design.
