On the site next to country house or a dacha, families with small children often equip a place for active games. Depending on your financial capabilities, desires and area of the plot, you can choose one or another option. This could be a whole playground, a sandbox, a swing or a slide. Many designs can be purchased ready-made, or you can assemble them yourself. You will learn how to make a children's slide with your own hands from the article.
Before you figure out how to make a slide for children with your own hands, you should study the rules for its construction and installation. You need to remember the following:
The slide must be stable, functional, durable and attractive appearance. Its base can be concreted or use metal supports. All structural elements should be sanded and varnished.
Be sure to consider the child's age if we're talking about For preschoolers or junior schoolchildren, the height of the slide should be a maximum of 3.5 m.
You need to choose the sizes and materials for a homemade slide depending on where exactly it will be installed. For example, if you need to make it not for the street, but for the room, then it should be small, and for production they use materials such as:
The principle of their manufacture does not differ from the work on the construction of street slides, but we are talking about much smaller dimensions.
And if we are talking about making an option for the street, then you should decide on the material, since working with each of them may differ. And the properties of this or that material also differ; they have their pros and cons. Their characteristics are:
For example last option you will learn how to build a slide with your own hands for the street. After all, it is wooden slides that are most often installed in dachas.
Since wood is the most available material, then for construction with their own hands they use it. In addition, a wooden structure is easier to repair and easiest to install. Unlike metal structures, you do not need to use welding machine and other complex devices.
Works on construction of a wooden slide start with preparatory activities. How successful the result will be depends on how correctly you perform them. At this stage you will need to do the following:
When the preparation is completed, you can create the basis for the future structure and perform subsequent actions. The algorithm is like this:
Naturally, there are different manufacturing options. It all depends on what kind of design it will be. Perhaps it will consist of two slides different sizes And additional elements. It will be more difficult to do this on your own.
Even the slope itself can be made based on various materials. In addition to plywood, the following may be suitable for it:
In addition, the wood can be polished with wax. Some people line the slope with laminate, but this is not recommended, since laminate tends to deform under load or moisture.
During construction, it is necessary to follow a number of rules so that the structure lasts as long as possible, and parents do not worry about the safety of the child.
In particular, secure each structural element as securely as possible. It is not recommended to cover a finished wooden slide with plain oil paint. Better to use acrylic coating or high quality varnish. At least this applies to the slope as the most used part of the product. Decorative coating must be applied in several layers, each one must be dried before applying the next one.
The covering of the ramp will wear off over time, so it needs to be properly cared for. Each time before painting, the surface should be sanded, all deformations on the boards should be eliminated, and cracks should be filled. And only after these steps the surface is covered with paint.
To ensure your child's safety while playing, remember the following:
If the slide will be made for common use, then there should be enough space around it for several children to be there at the same time.
When constructing a slide, you need to carefully plan everything and take into account all the risks. Regardless of what material is used, you need to carefully study its properties.
Now you know how to make a slide with your own hands in the country or near a country house. You just need to select the right materials for the job and follow certain parameters. Over time, you will be able to add swings, equipment, a carousel and other devices to the slide.
Step-by-step photo instructions: how to make a playground with your own hands. Tips, drawings, videos.
You can make a full-fledged children's playground with a slide, stairs, balcony, rope, manhole and swing with your own hands. The following guide will help you with this. It contains many detailed photos, so there will be no problems with the manufacture of structural elements and their installation.
To begin with, we purchase the material we need - boards 15x2 cm and 5x2 cm and timber with sections 10x5 cm, 10x10 cm and 5x5 cm.
We prepare the following tools:
During the work process, you may need some additional small things like a screwdriver, knife, etc.
Pre-prepare a project for the future complex. On the drawing, indicate the desired overall dimensions of each element of the system. Consider the size of the existing construction site.
Average length supports – 900-1150 mm. About 80-100 cm of each support will be dug into the ground, about 10-15 cm will remain above the ground.
We lay out the supporting elements on the site in accordance with the project and form a frame - two side parts of our future complex. For connection we use screws with a diameter of 8-10 mm. We embed them into the wood. We close the holes with plugs.
sandbox
We place the sides on supports, fixing them in previously prepared recesses. At this stage, we enlist the help of 1-3 people. We set the sides according to the level. It is recommended to first lay bricks under the bottom of each support for better stability of the site. We fill the installed supports with 10-15 cm of crushed stone and fill them with concrete mixture.
We connect the exposed supports with transverse beams. We leave the fill to gain strength.
While the concrete hardens, we are constructing the stairs. Cut the timber to the required length. The design of the staircase is extremely simple: 2 stringers and steps. We make the steps not too high - the playground is still for children.
We tighten the stringers using hairpins. We fasten the steps into the recesses and additionally fix them with self-tapping screws.
Let's dig in support pillars for the future staircase. We maintain the required slope. Let's make it not too cool. The procedure for arranging the supports remains the same as in the previous section.
Let's try on the stairs. We level it, attach it to the base and fill the supports with concrete. Painting the stairs.
Next we make the railings. For this we set vertical racks from timber, fasten them to the stairs, and then fasten the handrails. We make the top handrail from a board and fasten it at a height of about 90 cm, fix the second handrail approximately in the middle between the top railing and the stairs. To make it, we can use timber 5x5 cm, 5x2 cm or another similar section.
What is a children's playground without a slide? Let's do that too! We won’t spend money on a ready-made plastic trigger. We won’t bother with metal either. Let's make a slide out of wood!
First we will assemble the slide and then attach it to the base. Recommendations for laying the floor will be given below.
To make the structure we will need the following material:
We will use three boards to make a base for the descent. We plan the boards to the same thickness and sand them thoroughly. After this, we fasten the boards with bars directly along the surface. We fasten it from above - this way we can pull the boards to the beam as efficiently as possible. We recess the fasteners into the wood. We cover the recesses for wood processing. Let it dry, and then carefully sand the entire slide again - it should be as smooth as possible.
The base is done. Let's start making the side parts. Determine the angle of descent. The top floor of our play complex will be at a height of 130 cm. Therefore, the angle of descent will be about 55 degrees.
children's slide
We sand the sides, getting rid of sharp corners. Additionally, we round the boards along the length so that it is more convenient for children to hold on to the sides while going down the slide.
All that remains is to paint the product. You can cover it with stain and then varnish.
Now we need to install the finished slide. To do this, we concrete the timber supports in pre-dug holes. Suitable material with dimensions of 70x10x5 cm. Pre-impregnate the wood with an antiseptic.
We connect the base of the slide with the support posts and the play complex using screws.
The floor of our play complex is laid out from 15x2.5 cm boards. total length floor - approximately 2.5 m. Before laying the floor, we attach stiffeners to the frame of the complex. A 5x10 cm beam is suitable for their manufacture.
At the same stage, we construct a vertical ladder from the end. To assemble it, we use 2x5 cm planks. At the end of the work, we will hang a rope near this ladder. Recommendations for arranging railings have already been given earlier. We follow them. On the side of the steps, instead of railings from boards, we install 5x10 beams to create a manhole.
At this stage, we will assemble and install the support structure for the swing and arrange the access hole. We make the support for the upper beam crosswise - it’s more stable. We first make a selection for convenient joining of the beams and additionally tighten them with bolts. We lay a cross beam on top of the supports and press it with a clamp. We screw it to the support.
Digging holes for racks. We install supports in them, carefully checking each level. At the same stage, we screw spacers to the posts - they will prevent the supports from moving during the concrete hardening process. We fill the holes with the posts with a small layer of crushed stone and concrete them.
Pits for racks Bye concrete pouring gains strength, we make a hole. We make the slope almost vertical. We arrange steps and cutouts at our discretion. We cut out the holes using a jigsaw. We make the hole itself from OSB and attach it to a frame made of 5x5 cm timber and 5x2 cm crossbars.
We are installing a balcony on the top floor. To do this, we lay and secure the crossbars, lay the floor and erect a roof the length of the stairs. On the side of the slide we attach a wall made of OSB sheet. To make it more beautiful, we cut out a small window in it. We make railings on the balcony.
We sand all the wooden elements installed at this stage. We round off sharp corners and ends. We cover everything with varnish.
Mandatory elements of the complex of attractions at the dacha are a sandbox, swings and, of course, a slide, which even older children will enjoy riding. Most of them can be made independently, saving on the expensive purchase of already finished structures. For example, constructing a children's slide with your own hands is quite simple, using available materials.
In order to choose the material from which the children's slide will be made, you need to carefully read each of them, weighing all the pros and cons. The most popular are:
Even though they have a similar design, the manufacturing process is still different. The reason for this is the characteristics of the materials.
Each of these slides for children is built according to a standard layout, which includes:
In addition, the classic design is often supplemented with all sorts of internal labyrinths, sandboxes, additional descents - here everything depends only on your imagination.
Advantages:
Flaws:
When installing a wooden structure Special attention It's worth paying attention to the stingray. To cover it, it is best to purchase factory-made material, for example, linoleum or plastic. The latter is more expensive, but more reliable and safer.
If desired, it is very easy to remake a wooden slide, for example, turn it into a pirate ship.
Just a few years ago, such slides decorated almost every yard. With proper care, they can last a very long time.
There are practically no significant differences between a wooden and a metal slide, except that an iron structure will require pouring a foundation. This design consists of:
Advantages:
Flaws:
After familiarizing yourself with the advantages and disadvantages of each manufacturing material, you can confidently make a choice. It is not necessary to use only metal or wood; you have the right to combine them, resulting in an original, interesting and durable structure.
Slides can be part of an entire entertainment complex 
Slides can be expanded various elements 
Children will definitely like this bright wooden slide 
A high-quality and reliable slide will bring a lot of fun to children and their parents 
For children of any age, fun on the slide will be happiness 
A reliable slide is the key to safe games 
Wood is the best option for non-professional welders 
Metal slides are considered the most durable structures
It is worth understanding that when installing a slide from any material, certain requirements must be observed:
The success of the work depends on careful preparation.
Wood can be called the most optimal and reliable option, from which you can build unusual and original designs. It will be a godsend for people who are not directly involved in construction and repair.
When installing an iron slide, unprofessional welders and assemblers of metal structures can injure themselves or damage the raw materials, since this is a delicate material that can become deformed when heated and welding. In addition, for the manufacture similar products You will definitely need welding equipment.
Children's slides made of wood combine ease of use and high safety. Moreover, they are the easiest to manufacture and install.
Work must begin with drawing up a design drawing. Be sure to decide whether there will be a slide with a house or it will be classic version. Draw a diagram of it indicating all dimensions. This will allow you to calculate the amount of material. Norm:
The construction of the structure should begin with the choice of wood. Preferably use conifers. In order to build a reliable, beautiful and comfortable wooden slide for children, you will need the following materials:
List of required tools:
All work takes place in several stages:
At the end of all work, the slide must be coated with varnish or a coloring emulsion. It is also recommended to treat wood and plywood by special means, otherwise, under the influence of moisture, their service life will sharply decrease.
The slope can additionally be covered with linoleum, which will provide better glide.
You can decorate the slide with your children. They will definitely enjoy this process.
Coating with varnish and special emulsions ensures a long life for the slide 
Wooden slides provide exciting games 
A slide made of wood, which is coated with emulsions and special agents, will allow children to play safely 
In addition to varnish, slides can be coated with any emulsions, thereby giving them a bright shade 
Multi-colored options will delight kids 
Upon completion of all work, you will have an excellent attraction for children that will meet all safety requirements
The key to a successful and fun time is a high-quality and reliable slide. She is a way to keep a child occupied exciting activity and develop his physical skills. And as the baby grows up, it will be possible to complete the design, improve it, which can encourage your fidget to healthy image life.
If you have children and country cottage area, then it’s definitely worth building a slide on it. While parents are gardening or cooking barbecue, the kids will have fun on the mini playground. Read about how to plan and make a slide with your own hands, using photo and video instructions in practice.
The slide on the site should first of all be safe for children of different ages. So, for children under 2 years old the height of the slide is only 1.5 meters, for children from 2 to 7 years old the height is about 2.5 m, and for teenagers 3-3.5 meters. The steps on the slide ladder should be wide, and the rungs should be located close to each other. Further, the staircase design must be equipped with handrails of any type: after climbing the slide, the child must hold on to something.
Advice! So that the slide serves more than one generation of children and is safe on the stairs and around it anti-slip coating. The covering protects children from injuries when climbing during rain, snow or after swimming in the pool.
Another important stage in creating a safe slide is calculating the weight of the children who will ride on it:
The height of the slide depends on the age of the children Advice! Under the gutter along which the child descends, a soft piece is placed - this lawn grass, a mound of sand or soft covering.
The slide is placed in the place where it opens good review from any point on the site. But make sure that the place for games is not in the very hot sun. In the case of such an arrangement, it is worth thinking about building a canopy.
Advice! The canopy is made of polycarbonate, and a regular beach umbrella is also suitable for a low slide.
Slide from natural wood distinguished by its environmental friendliness and ease of installation, it consists of the following elements:
Such a slide can be complemented by a whole of labyrinths, beams, sandbox or mini rooms with entrances and exits. The construction of a wooden slide involves the selection of high-quality raw materials and their normal processing.
Wooden slide The ramp is made of plywood, pre-coated with varnish to hide sanding errors. Support structure It is made of timber, and the steps are made of strong boards.
Important! Today, there are a variety of ramps available for sale, made of durable plastic, fiberglass or wood. Minimum price stingray 1.5-2 thousand rubles. The best option is to create a supporting structure for the slide and then install a flat or spiral slope.
A wooden slide is good for everyone, but located in an open space, after 3-5 years it can dry out, be damaged by insects or mold. Wood rots from rain, and the situation can be saved by covering each structural element with a thick layer of varnish. But after winter and hot summer, the slide should be inspected, identifying dry or cracked parts.
Previously, metal slides stood in every yard, distinguished by their strength and durability. Such designs are more reliable, because they are not afraid of the hot sun, rain, or frost.
The construction of such a slide is carried out in several stages:
Important! Gutter is 2 metal pipes, to which a curved sheet of metal is welded. After assembling the slide, all welded seams must be ground; a grinder is used for these purposes.
After completing the assembly of the structure, the slide can be painted with plain paint or painted. The metal gets very hot under the sun, so on hot days it is worth covering the slide with a beach umbrella to prevent children from burning their skin.
Play complex with slide and swings A simple slide can be made using a descent from a house, which is also built with your own hands, using timber or leftover building materials:
The last stage is to cover the entire structure with a layer of varnish.
To avoid the hassle of making it, you can simply purchase a slide:
You can buy a slide, but it will be more expensive than self-construction Creating a children's slide is a creative process, and a full-fledged play area requires a swing, a sandbox and even a football goal. But to build these elements children's corner much cheaper on your own, because buying finished product requires 60% more material resources.
