A coffee table cannot be called essential furniture, but it occupies an important place in arranging a living room or bedroom. Modern tables are endowed with a lot of functions, representing a storage system not only for the press, but also for other useful things. Many models are equipped with spacious drawers and compartments, a transforming system, turning into an oversized dinner table. Besides everything else, Coffee table IR acts as a significant decorative element that successfully complements stylish design. It’s quite possible to make such a thing with your own hands if you apply some imagination and patience, and our article will provide interesting ideas for designing a coffee table at home.
Many different materials are used in the manufacture of modern coffee tables. Unlike previous times, when standard rectangular structures were stamped from MDF, today's models surprise with their diversity. One of the expensive options are wooden tables made from natural solid wood. Such a thing will decorate any interior and will always look chic and respectable. The designs come in a wide variety - from strict, rough tables to Scandinavian style to classic ones, decorated with forging or carved decorations.
Since wood is quite expensive, chipboard and MDF boards can help replace it. If we talk about durability, they are, of course, inferior to wooden ones, but they look no worse. Design tricks allow you to compensate for the simplicity of the material, for example, transformable tabletops, built-in sockets, etc.
Metal also takes part in the design of coffee tables. From metal pipes form frames, then supplementing them with countertops made of other materials. The graceful curls of forged elements with glass tabletops look very beautiful. Sometimes you can find designer designs in which the table consists entirely of metal.
In modern furniture production, you can increasingly find glass interior items that bring a certain lightness and airiness to the atmosphere. The products are made of heavy-duty tempered glass, resistant to various types of influences, so you don’t have to be afraid that such a piece of furniture will break or become deformed under the influence high temperatures. In some models, only the surface of the tabletop is covered with glass.
Plastic is used much less frequently, as it is not very durable, but has greater color palette and low cost. Most often it is found as components of a wooden or metal structure.
IN homemade For original coffee tables, the choice of material increases significantly, since, in addition to traditional materials, various improvised means are used.
To make coffee tables with your own hands, plywood is most often used, which is relatively inexpensive and easy to process. You can also use various available materials and build the most bizarre designs. More complex parts, for example, curly handles, legs, wheels, fittings and others decorative elements, can be purchased at a furniture store.
Making such an original coffee table will not require much time, but the product will take its rightful place in any interior with a touch of minimalism. To work, you need to purchase a sheet of plywood, three legs with fasteners, thick thread, a pencil, a tape measure, a jigsaw and paint (preferably white or black).
So, the first thing you need to do is cut out the tabletop. On back side sheet, select a point that will be the center, drive in a small nail. Cut a piece of thread the length of the radius of the future table. We attach one end of it to a hammered nail, and tie a pencil to the other and, stretching the structure, draw a round shape for the table top. Next, you can dream up and give the canvas a more original shape. It is noteworthy that to make such a table you will not need any drawings or measurements at all. We cut out the drawn shape of the tabletop using a jigsaw, sand it and paint it. When the structure is completely dry, we attach the legs. The table is ready.
This original design fits perfectly into many styles. It will most successfully complement a daring loft or natural eco-style. It is not difficult to design such an exclusive table: for work you need to get a tray, metal legs or wheels (at your discretion). You also cannot do without screws and a screwdriver, a saw, paint or varnish with a brush.
Step by step, all work on constructing the table will take place in the following order:
1. Mark the dimensions of the table on the pallet and saw off the excess part.
2. We take planks from the leftovers and cover the gaps in the main structure with them to create a continuous surface, fixing them with self-tapping screws.
3. We turn over and form five transverse strips: two on the sides (the legs will be attached to them) and one in the center for stability.
4. We mount the supports and open the structure with varnish or paint.
An old worn-out tire can be a great base for creating a beautiful home coffee table. Additionally, you need to prepare the plywood. Before you begin construction, you must thoroughly wash and dry the tire. Next, you need to measure the diameter of the tire and cut two circles from plywood: one - the tabletop - should correspond to the diameter of the tire, and the other - the base - should be a few centimeters smaller. You can immediately attach legs, wheels to the base, or leave it without supports at your discretion. We attach round sheets of plywood to the tire using self-tapping screws or sit them on construction glue - the base is ready.
Next, we choose one of two methods: we wrap the rope either completely around the structure, or only at the sides. In the first option, you need to think about how to treat the countertop - perhaps paint it or coat it with a shiny varnish.
You should start wrapping from the center: fix the end of the rope with a self-tapping screw or a glue gun and begin the movement of winding circles, gradually moving to the sides. There is no point in wrapping the base, unless you decide to make the table half two-color. At the end of the winding, the entire structure should be coated with transparent varnish to extend its service life.
If you have wooden vegetable boxes lying around your household, don’t rush to throw them away. Just four of these containers can turn into a beautiful and useful part of your living room interior. If you don’t have drawers, the hardest part of making a table will be getting them. Then everything is simple: the boxes need to be sanded, painted and folded, as shown in the photo. We use a sheet of plywood, which must be screwed to the bottom side of the structure so that it does not fall apart. Ours is ready coffee table. The advantage of this design will be the organization of spacious storage areas for various magazines, books and other things.
Nowadays, traveling around different countries became available to many. But there is a special category of people who simply cannot live without constant travel to remote corners. They are the ones who will surely like a coffee table reminiscent of certain pleasant voyages. Any old suitcase with hard walls that is not suitable for its intended purpose will be suitable for production. You will also need a sheet of thick plywood, a screwdriver with screws, paint and, if desired, legs or wheels.
We cut out two sheets of plywood with an area equal to the base suitcases, fasten them with inside to the base and lid. Screw on the legs or wheels. Next, you need to decorate the table - different methods are used for this. One simple option is to paint it white, and when the structure is dry, use sandpaper to make abrasions indicating the antiquity of the item. This product will suitably decorate a living room in a shabby chic style. The black color of such a table will harmoniously fit into a loft living room, and the decoration using the decoupage technique will become a real masterpiece of Provencal design.
The uniqueness of furniture made from stumps and driftwood lies in its uniqueness - what is created by nature itself does not have similar patterns and textures. Such products always attract the eye with their curves and weaves. In addition, get raw material not so difficult - it can be found in the forest, on the shore of a pond. The snag needs to be washed, cleared of bark, and rotten waste removed. Next, you need to make adjustments, level the shape to fit the tabletop and base, and let the workpiece dry thoroughly (if there are large holes in the wood, it can be puttied).
The dried driftwood is carefully sanded, covered with stain (you can choose the shade you like best) and varnish. The base is ready. The table top can be attached using construction adhesive or self-tapping screws (depending on what it is made of). Nowadays, glass tabletops are very popular, through which winding wooden branches are clearly visible.
We looked at only a few options for making coffee tables with our own hands. Our gallery will provide much more information and photos of finished products, where you can learn a lot interesting ideas. Enjoy watching!
An alternative to purchasing furniture is the opportunity to create it yourself from scrap materials. You can make an original coffee table with your own hands in a couple of hours. The process is simple and exciting even for a beginner. It requires initial skills in handling carpentry tools, ingenuity and a certain amount of aesthetic flair.
The coffee table comes in countless varieties.
Benefits of creating home furniture on one's own:
It’s easy to make: if drawings are required, they’re not at all complicated.
Put created on our own The sample can be in the living room, bedroom or children's room. Products created independently look great in city apartments and country cottages, delighting owners and guests with their unusualness and style.
A coffee table in an interior is like a business suit for a man or makeup for a lady.
Which ones exactly? necessary materials will come in handy, depends on the basis of the item being collected. To make a coffee table with your own hands, you will need a variety of auxiliary things.
First of all, the decor gives the table its appearance, so it would be appropriate to start from the end: with the decoration and decoration.
It will be difficult to assemble an accurate and durable table structure without glue, varnish and sandpaper. Permanent paint will also come in handy - choose convenient sprays, they can quickly and without getting dirty to cover the entire surface of the tabletop. A good quality primer may be needed to cover the base and supports. You can buy it at hardware store. Don’t forget the materials for decoration – fabrics of various textures and densities, lace, colored plastic or glass, etc.
It will no longer be difficult to select a design from ready-made ones or to develop your own: the load on the object is small, and if a flaw occurs, it is not difficult to redo it or do it again.
Ancillary materials will not be superfluous - ordinary newspapers, large cardboard, plastic sheeting, so that “production” waste is not carried around the room.
The cost of labor and money is nothing at all.
To assemble the planned model, you need to prepare the necessary tools.
First of all, these are a hammer, scissors, and pliers. You will need different fasteners, furniture nails (regular and rivets) or screws of different sizes.
You can decorate the table different ways, see fig.
To quickly cut wood parts, you need a hacksaw. If there carpenter's table, and you have skills in such work, then having a chisel, cutter and plane will be a plus to process the wooden base with professional precision. To decorate the elements you will need a sharp chisel or a set of carpenter's knives.
With the help of the most ordinary wallpaper, you can quickly and inexpensively decorate the most ancient, shabby table, as long as it is strong.
What the coffee table will be like is up to you to decide. Next, we decide on the design and construction.
To quickly do beautiful furniture, often take wood as a basis. It can be made from a regular pallet. One product without gaps and four wooden supports enough to create a beautiful table yourself.
Each layer, except the finishing one, is sanded after drying, but for this you need velvet sandpaper, which you can’t always find on sale.
Such models look good if they are low. An interesting coffee table can be made from an already unnecessary radiator central heating. To do this, it must be painted evenly. Instead of a tabletop, you can take glass or a wide board that fits the size.
You can bring back a pile of empty shells and sea pebbles from your vacation at sea.
For mobility, wheels from an old baby stroller are often used. The construction of a furniture masterpiece will take a minimum of time and money.
You can find a new use for an outdated window - use it to create a table with your own hands. If necessary, sand the frames and coat them with paint. As supports, you can use not only wooden legs (bars), but also old books that do not fit on the shelves.
If you have replaced ordinary windows at home with metal-plastic ones, then you can make an interesting coffee table from one old window.
A coffee table will be convenient in the country if you spend a lot of time there. You can apply a pattern or a thin layer of matting paint to the glass of such an original tabletop.
Unnecessary Entrance door can also serve as a base for your table. To do this, take its central part, and the rest go to the supporting sides, since the coffee table will not be very high. For greater stability, you can make the bottom shelf from chipboard.
Well, if you replaced the input or interior doors, then use the old door as material for a new table.
Cover the surfaces of the product - tabletops and supports - with tinting. Matte varnish will look good.
Often, outdated doors have embossed zoning; when using a table, this is convenient, since you can safely place a tray with dishes without fear that it will slip off.
Sometimes it’s a pity to throw away good pieces of furniture that have gone out of fashion. They can serve as the basis for new products. Smooth cabinet doors, especially if they are varnished, are an excellent preparation. Legs are also useful - straight or carved, if the product is planned to be low. You can use two doors, connecting them with cut pieces from the side panels of the cabinet. This option requires very little time and is practically free.
Wooden boxes for fruits, vegetables or other items - universal material to create furniture with your own hands.
Chest drawers are suitable for a composite or solid table. Fitting is carried out by sawing off the protruding parts. The assembled tabletop is installed on any supports - for example, elements of the same chest of drawers, bars treated with a primer, books, etc.
An unusual coffee table is made from whole piece tree - a stump left from a cut pine, birch or poplar. It should be wide enough and even, with beautiful rings. Depending on the height of the stump, you can choose from the following:
A sanded stump or log can be placed directly on the floor or wheels can be attached.
If desired, you can leave the natural appearance of the stump - with bark (leaving it as is or varnishing it) or paint it in any color, after first removing the bark. White and beige tones look best.
You can also use vintage voluminous suitcases as a tabletop. This original handmade coffee table will appeal to romantic people who like to frequently spend time on educational trips.
Nowadays, coffee tables have finally gotten rid of the hypocrisy of their owners.
The basis is an old suitcase, preferably made of thin wooden planes. Leave the locks in place; they serve as fasteners. You can also leave the straps. The suitcase can be tinted or left in natural form, depending on the condition of the surface. For the legs, you can use either wooden blocks (or carved furniture supports) or wheels.
This kind of furniture is made from a wide variety of materials: wood, glass, steel, aluminum, plastic, chipboard and plywood.
To make the surface more resistant to moisture, you can coat it with varnish. The fasteners here can be both bolts and hardware. You can drill holes for the legs in the bottom of the suitcase itself and secure them using iron rims with spacers.
tabletop edge made of solid wood or laminated veneer lumber furniture board it should be processed with a milling cutter to give it a beautiful shape, and then sanded sandpaper.
Wood is a material that can be easily processed. Sand half a wide log and thinner logs. The bark on the sides and bottom of the countertop can be left or removed. For fastening, use nails and metal angles. Instead of legs made from logs, you can take metal ones or legs from old furniture.
It seems as if this coffee table is made entirely of birch logs, but this is not the case.
Making an exclusive coffee table from wood is quite simple. Ordinary logs will serve as both the base and supports.
A coffee table made from a large cable reel looks very interesting. Firstly, round form looks harmonious. Secondly, it can be made rotating. Thirdly, the side cavity can be used for a variety of items - magazines, books, writing instruments, disks, additional cutlery (if they are not needed on the table during tea drinking).
Large spools of industrial cable are a rare but ideal stock for coffee tables.
Its side flat sides will serve as a table top.
The coffee table can be made with or without supports, simply by placing the coil on its side. You can use the “Health” disk as a torque element.
The cavities on the sides look more interesting if they are zoned symmetrically using wooden boards secured with glue.
A DIY glass coffee table is very easy to make. As a tabletop, ordinary thick glass (square, rectangular, round) is used, preferably tempered, since the material is quite fragile and can crack from impact or temperature changes.
Glass – you can only use tempered glass, otherwise the reliability of the table will be in doubt.
The coffee table can rest on wooden carved legs with a wide base, books, hemp and other elements. It is advisable to make a central support for it. The elements are attached with a special durable glue.
A variety of ideas are used in decorating a hand-made sample. Smooth surfaces hold a pattern or ornament around the perimeter well, while non-uniform surfaces hold appliques and other elements well.
When making a table with your own hands, you can use additional decorative inserts. If you're using a cable reel as a base, it often has a center hole. You can put a tall vase with dry plants or flowers in it.
The material you choose for decoration should be abrasion resistant. The exception is elements designed to create the impression of a vintage product.
The main thing here will be strict adherence to the proportions indicated in the drawing.
Paint tinting can also act as decorative design. You can create patterned surfaces, create natural patterns on wooden surfaces, shade parts of elements, creating the most advantageous look for your product.
If the coffee table is unstable, then objects may slide off it, so you need to carefully adjust all the supports to the height. An embossed finish can also be used as an anti-slip measure.
The finished product is treated with stain, painted, varnished or “aged” - as desired.
For the manufacture of such models, absolutely different materials– fantasy will not allow you to limit your ideas. Try it out, come up with options for furnishings, this will make it look not only stylish, but also completely new.
Wood is the easiest material to process and the most pliable.
In the age of electronic media, few people bother to read printed publications. Despite this, coffee tables still occupy a place of honor in every home.
In addition to their intended purpose, they can be used for other useful purposes: serving a light breakfast or dinner, minor repairs and home creativity.
Simplicity of design, variety of shapes and designs, minimum tools - all these advantages of coffee tables attract the attention of home craftsmen. In our article we will do detailed review popular homemade products and we will give practical advice for their production.
The easiest way to make a coffee table with your own hands is to use shields from edged boards, veneered with chipboard or MDF.
In order to hide the connection points of the plates, it is used classic method– assembly on round wooden spikes (dowels). All that is required of the home craftsman in this case is to accurately mark the installation locations of the spikes at the ends of the sidewalls and drill mounting holes for them in the bottom and top covers.
The simplest coffee table made from MDF board
To increase the rigidity of the structure, a vertical cross member must be installed between its side walls. A small niche for storing magazines and other small items will not be superfluous here. It can be made from the slab left over after cutting the lids and sides.
Mobility is a useful option for the table. It is implemented by installing furniture wheels on the bottom. Compact transport wheels can be hidden, or you can buy larger ones and deliberately highlight them. This way we get an original table on wheels made of polished bars supporting a massive wooden tabletop.
For those for whom mobility does not play a big role, and would like to have a solid table in their home rustic style, you can offer an option from powerful boards. Such a table will undoubtedly become one of the main decorations in the living room of any country house.
Reasonable laziness combined with a thirst for creativity often leads to interesting discoveries. One of them is a table made from an old tire.
It is assembled very simply:
Homemade design from an old tire looks great
This creates an unusual coffee table that can be used as a banquette if necessary.
The idea of using "random" objects to create home furniture has proven to be extremely productive. She gave birth to numerous homemade products from boxes and pallets. A little imagination and a minimum of cost are required to assemble a wooden coffee table based on four standard drawers.
The assembly algorithm looks like this: the boxes are placed on their edges, placing them in a circle, one after the other. Having connected the structure using self-tapping screws, a shelf is made in its center. You can put a flower vase here or add decor from river pebbles or shells. The work is completed by treating the wood with sandpaper, stain and varnish.
Natural wood does not need sophisticated decor. Using it for interior decoration, complement the decor with a simple table. To assemble it you will need several planed bars and fence picket strips.
The base frame will look reliable and massive when using contrasting color combination with table top. To do this, the bars need to be tinted with a dark stain, leaving the lid in the natural color of pine lumber.
Wood in furniture goes well with metal. You can verify this by making a loft-style coffee table with metal legs. Its lid is assembled from three pieces of tongue-and-groove boards and is framed by a cornice strip.
To make the legs you will need welding machine, a piece of steel plate 1.5-2.0 mm thick and several scraps of smooth reinforcing steel with a diameter of 10-14 mm.
Having bent four rods according to the template, square pieces of plates are welded to them (or thick carpentry corners as in the photo) and alternately attached to a tabletop assembled from a tongue-and-groove board. For final finishing, you need to sand, tint and varnish the lid, sides and paint the legs.
Instead of a rod, you can use profile pipe rectangular section. By welding two rectangles from it, cleaning the seams and covering the metal with silver paint, we will get reliable supports for the tabletop, assembled from thick oak boards.
To increase stability, the metal sidewalls under the lid are connected with a section of profile pipe.
Coffee tables with a top made of sawn wood look very impressive. Finding this basic element is not difficult. At any sawmill you will be offered a “semi-finished product” the right size. An electric planer and a belt sander will help you bring it to condition.
The table legs can be made from thick bars or you can use reinforcing rod for them. Contrast between a massive tabletop and a light one metal base will give the structure a touch of exclusive design.
Another interesting option combination of materials - wood and glass. The tabletop can be oval or round, resting on a cross-shaped base of two timber frames.
Mobile coffee table made from wooden pallet and covered with square glass, it looks stylish and modern.
Glass gives a rich look to the entire structure and closes the gaps between the tray slats, through which small objects can fall onto the floor.
Those who prioritize functionality will certainly like the transforming coffee table. Through simple manipulations, it radically changes not only its height, but also its appearance.
When assembled, it is a regular stand for magazines and newspapers. By raising two sidewalls with legs, we increase the height of the table and expand the surface of the tabletop to a “dining format”.
The basis of another transforming system is two metal frame-pedestals. Each of them is hinged to the tabletop. When assembled, they lie horizontally, and when the lid is lifted, they rotate on hinges and stand vertically.
The height of the structure when unfolded is 73 cm. This is quite enough to use the transformer as a computer desk.
Its lid consists of two plates that can be moved horizontally. In this case, one plate rotates on a hinge around its axis. If necessary, such a transformer can be turned into a dining table for 4 people in a matter of seconds.
Transformable coffee table “three in one”
Some create folding adaptive systems, while others successfully experiment with ordinary plywood scraps. The result of the search for new forms was this unusual coffee table.
We can only marvel at the scrupulous accuracy of the calculation and its talented translation into a visible image.
In theory, everything looks simple: the base is sequentially glued together from three dozen plywood frames. Each of them has a certain angle of inclination of the legs.
In practice, to calculate all the elements of a plywood stand, a three-dimensional modeling program is needed.
The assembled plywood “pie” attracts the eye with its unusual futuristic shape. A glass top crowns this example of innovative joinery technology.
“We would like something simpler, but also beautiful,” he will say House master. Please, there is a table that is no less elegant, but more affordable to make. It consists of three packages of thin planed boards.
Numerous cracks in the stacked tabletop can be covered with a glass lid.
A few words need to be said about combining glass with wood. The best decision– use of transparent “optical” glue. It is quite difficult to drill through thick glass at home without causing irreparable damage. Therefore, abandon the idea of mechanical fixation and let modern chemistry show its best qualities.
Speaking about the material for the countertop, we completely forgot about wooden eurolining. This is an excellent material at hand, equally suitable for creating a lid, sides and legs.
Tabletop made of eurolining - beautiful and reliable
The lining tabletop can be of any shape. Cover made from wooden planks, cut with a jigsaw along a given contour.
To make a coffee table from clapboard we will need several tools:
Finished product dimensions and design docking ports should be thought out in advance and included in the sketch drawing.
The finishing of the table is carried out in two stages. Before assembly begins, sand the surface of the lid, bottom and legs with sandpaper. After completion of the work, the wood is covered with tinting stain and colorless varnish.
It’s even easier to make a coffee table from chipboard. This material performs two functions at once: it forms a continuous surface and carries the load. We recommend using a veneered board, since paint and varnish on “bare” chipboard cannot hide the texture of wood chips.
Having completed the assembly, you need to cover all the edges (table top, bottom and legs) with plastic furniture tape, warming it up construction hairdryer before gluing.
It would seem, how can a coffee table surprise a modern person? A long-forgotten item can no longer be found in many apartments. Modern man loves space, remembering that people often stumble over a bulky table, newspapers and unsolved crossword puzzles are lying here and there. What now? It turns out that coffee tables not only have not lost their relevance, but have also become an ultra-modern decorative item; craftsmen make masterpieces with their own hands. And yes, there are even annual exhibitions dedicated only to this type of furniture.
Read in the article
What a modern coffee table it is today, a modern coffee table that has survived more than one generation of Russians. The answer is not at all that simple. The only thing that this name sometimes has in common is just a collective phenomenon relating to a certain type of furniture with completely understandable tasks. The rest is a problem.
Sometimes it seems that a person has gone a little crazy and is dragging all sorts of garbage home. But no... This is also a work of furniture art.
It would seem that there is no rational grain in this chaos. But no! It turns out that each of these samples must meet both aesthetic standards and correspond to some functionality.
Indeed, there is a whole list of standards and specifications for factory products. For example, they must be stable and safe. Forms are “perfect, providing ease of use.” And the materials should be simple and environmentally friendly. In fact, a coffee table is one of the most simple designs. You can’t argue with this when looking at some amazingly simple and elegant masterpieces.
Simple, but so elegant! Another recommendation that furniture makers talk about is that the coffee table should be assembled and disassembled. More complex models may have pull-out cabinets, for example, like this. And even if some of them are slightly non-standard, such a table will definitely attract the attention of guests.
Another requirement is the accuracy and cleanliness of assembly and fitting of elements. Here again questions arise. And if the table was practically not processed. What to do in these cases?
You will be surprised, but every table that comes out of the factory has a long history of creation. From simple sketch up to a whole pile of papers. All details must be unified. That is why in Soviet time the factory tables created such a dull impression.
And it’s great that today there are enough art workshops, videos and other ways of exchanging information and knowledge to try to spy on really interesting projects to create such small works of art.
The main thing to remember is that the coffee table really should be stable and safe. And even like the one in the photo.
Drawings are the most important part of working on your own table project. Here it is important to choose the golden mean between functionality and originality. You can take ready-made drawings as a basis, and there are a huge number of them today, and modernize it during the process. Scheme options that may be useful during work.
And here’s how a seemingly ordinary table at first glance can be turned into a small front garden. The main thing is to imagine in advance what your table will be like, and the solution will arise by itself.
Advice! To build your own drawing, prepare a sheet of paper, a pencil and a tape measure. Using a centimeter, you need to measure the area of the space where you plan to place your creation. Based on the data obtained, prepare a drawing.
A schematic drawing is the basis for further work on creating furniture. The drawing will help you choose the right base for the structure, calculate the load on the frame, prepare the required number of corners, screws or clamps, as well as supports or legs on wheels. Do not forget that in the drawings, in addition to the dimensions of other materials, the thickness of the countertop is indicated.
A coffee table is most often made from one or two types of materials. Usually this is both metal and glass. However, there are hundreds of solutions to imagine what your dreams could be and look like.
The most important thing here is to think through all the elements in advance. Sometimes you will have to work with each of them separately. Plastic, glass, metal - all this can become an important part of your art object.
To make a simple table, you need to purchase laminated chipboard sheets. For work we need. In general, the work process resembles the previous instructions, with the only difference being that in the case of sheets, they are attached to the corners.
Advice! If you don’t have a jigsaw, the cutting work can be done right in the store. To do this, you just need to name the dimensions of the workpieces.
The shelves can be fixed to confirmations. To screw them in, we pre-drill the holes with a 4.5 mm drill. If you have questions about the best way to make a coffee table, you can check out this tutorial video.
A glass table will make your space light and airy. Very often, this technique is used in small rooms so that this piece of furniture does not clutter up the space. In some cases, painting the tabletop is allowed.
Special attention attention should be paid to the quality of glass fasteners. For this purpose, there are special fixation systems that prevent its damage.
Despite the abundance ready-made solutions, in our country, using unnecessary things to solve completely mundane problems has always been and is considered a favorite pastime. Some craftsmen share ways to use unexpected materials to create furniture.
Products made from tires are especially popular - they are convenient to install in dachas and. Here are some options for such non-standard furniture.
Some craftsmen manage to hide the presence of a junk item with the help of simple, but very effective techniques.
Very often, an ordinary travel bag.
The main task is to ensure reliable attachment to the base. In itself, such a table will have considerable functionality.
Such tables require practically no additional processing, and the attachments to the base are very universal. They can be attached to wooden base, tighten with straps to the metal frame.
Now let's look at the assembly order simple table. This master class is quite simple to implement and does not require any special skills.
So, today we’ll look at how to use old wheels on wheels. wooden boxes from under vegetables or pallets.
| Illustration | Description of action |
 | As usual, we will prepare the tools and necessary materials for the work. |
 | We begin assembling the base; to do this, we lay out four boards in parallel, securing them with perpendicular sections of boards. |
 | We fasten all the elements with nails. |
 | We screw the connecting elements that form the frame of the pallet. |
 | We fasten top part our pallet. Now it's time to move on to decorating. |
 | For painting, you can choose any color close to the required range. |
 | We prepare an element for fastening from suede or leather. The material must be dense enough so as not to tear. |
 | We braid a pigtail. And fasten it with self-tapping screws. |
 | This is how our coffee table turned out. |
Design with drawers It is considered one of the most difficult for beginners to perform. Take a closer look at how diverse the options for retractable systems can be.
To begin with, a DIY furniture lover should learn how to create a stool, since it is the easiest. And then it’s time to study the issue of creating a table.
Table designs vary, however, the simple version is very similar to the process of creating a stool.
A simple table for use in the country or during a picnic can be assembled in just a few hours. To do this you will need a hacksaw, hammer or drill.
However, a table based on a similar approach can be made for a living space. Because it can ideally replace the current extra-large option purchased from a retail outlet or furniture store.
The process of creating a table yourself is interesting on the other hand, because with its help the author has freedom of creative expression. It can be presented as a noticeable element of the interior of the room.
Creators of handmade amateur furniture are called carpenters for a reason. The usual definitions like: sofa holders or bedside tables, or maybe cabinets, do not apply to them.
Having gained experience in this area, over time it will be possible to create exclusive types of tables with advanced characteristics.
Now let's consider the issue of creating wood-based tables yourself.
Wood is clean and affordable, and is not as difficult to process as other materials. It conveys the maximum energy of the aesthetic filling of the style of the living room.
Due to its properties, it is lenient towards the mistakes of beginners in the field of independent furniture creation. However, thinner versions of the tables will require an advanced level of craftsmanship.
To begin with, having learned to work with wooden things, then it will be easier to use glass, plastic or even metal as a material.
To study independent creation tables or other wooden elements furniture, it is necessary to use only non-residential premises.
This is due to the specifics of working with wood. It leads to the formation large quantity dust, shavings and other waste.
And the process of tinting or creating protection for a material based on stain can create dangerous emissions into the air. Actually, nitro varnishes can also be dangerous.
Because of this, for a personal carpentry workshop you will have to take care of ventilation of the room. Experts advise creating artificial ventilation of the room.
Many people use a garage for this, however, production waste can pollute or damage the car, so this is not the best option.
For the most part, to begin with, you can limit yourself to a simple carpentry tool, however, later you may need modern versions in the form of:
And there is also a regular belt sander for grooves with recessed areas, which is distinguished by a protruding version of the working part.
Such instruments stand out due to their price and narrow specialization execution of work, experienced craftsmen It is recommended to rent them for a short period of time.
The most the best specialists Using various sanding machines, you can even create the effect of artificial aging of wood, however, this is a very difficult job for beginners.
For creating wooden table Any wood that is moderately resistant to decay will work well, however, you should refrain from soft versions like poplar, willow, ailanthus wood, aspen and even alder.
Of the domestic types of wood, it is best to use:
I would like to decorate a table and probably all types of furniture created with my own hands with an artistic version of painting, and not with ordinary stripes.
However, over time, the design may deteriorate; to prevent this from happening, it is necessary to rub the paint into the depths of the wood before the varnishing process. This can be done using the technique of glazing. It's about about layer-by-layer rubbing of the paints used.
