The word “chaise lounge” is immediately associated with comfortable relaxation in nature. In addition, a comfortable portable chair will emphasize the style and individuality of a country house or garden plot. A store-bought lounge chair can be quite expensive, but you can easily assemble it yourself from scrap materials.
Any chaise lounge is a folding chair on a frame, often with an adjustable backrest. The word “chaise lounge” comes from the French expression Chaise-longue - “loafer”.
Depending on their purpose, sun loungers have different configurations.
According to their design, sun loungers can be seated or reclining.
Fabric seat can be easily removed for washing or transport
Products from environmentally friendly material popular with summer residents 
A chaise longue with a plastic seat in a classic frame is suitable for the beach 
A chaise longue can be a type upholstered furniture 
The Leonardo chaise longue is equipped with a mattress 
The fabric for the seat should be strong and dense, not subject to stretching 
The simplest folding garden lounge chair “Valdai” is the most budget option 
Non-folding sun loungers are best used permanently 
Chaise longue Cosatto - minimalist plastic and metal 
Chaise longue CHAISE LONGUE is made of thick plywood
You need to clearly understand what you would like to receive and what capabilities you have. If you need a durable design, but have no weight of great importance, then you need to focus on a metal or wooden chaise longue with a wooden seat. The easiest way to make such a seat is from pallets - there is already ready assembly boards on a frame, but the boards themselves are of poor quality and will require long processing after assembly - sanding, painting. Making a chaise lounge from bent steel pipes requires handling skills welding machine. Finished design It will turn out very strong, but heavy. If, on the contrary, you need an extremely lightweight structure that takes up little space, then think about a chaise lounge made from the frame of an old folding bed.
But the easiest option to make is the usual wooden chaise longue with a fabric seat.
We settled on simple wooden structure: bars connected by bolts with nuts and washers. The strength of this chaise lounge is given by three slats in the back, which also allow the chair to transform. The seat is made of durable awning fabric and is fixed on two round bars.
We will need tools:
Metal fittings and other small items:
Compositions for preparing wood:
You need to carefully choose the fabric for the seat; it should be hard and comfortable, and should not wear out quickly. The best option- awning fabric; but any other dense fabric will do - tarpaulin, denim, canvas. It's good if it's bright and not light. It's more elegant and practical.
All bars must be sanded, starting with coarse-grained sandpaper and ending with the finest sandpaper. It is advisable to impregnate them with a special impregnation against rotting or water-repellent impregnation, then prime and paint or stain them. Then the chaise longue will serve you for many years in any conditions.
The fabric can be removed without much effort
The nuts have the ability to unwind, but they cannot be tightened tightly - otherwise the chaise lounge will not be able to easily unfold and fold. To avoid unwinding, you can add one more locknut; Or you can put the nuts on glue or paint, only then do not touch the structure for a while so that the glue or paint dries. But first you need to adjust the tightening of the nut so that the parts move freely relative to each other.
Here is another approximate drawing of a slightly different design - all parts, dimensions and connections are clearly visible here.
If you have prepared carefully wooden parts, then no special care will be required. But over time, all the steps of sanding, impregnation, priming and painting should be repeated by removing the fabric seat. The removable seat can be removed when it rains and can be easily washed when dirty. You can also make it from washable fabric. For the winter, it is better to put the sun lounger indoors.
The simple process of making a chaise lounge with your own hands will please any craftsman with a wonderful end result. A variety of materials and fabrics will allow you to be creative and create an original item. And when proper care The chaise longue will serve you for many years.
Chaise lounge - comfortable and lightweight design chairs that are used in recreation areas: on beaches, by pools, an integral part of dacha decorations. It can be used to relax after a hard day at work, caress yourself in the sun's rays or take a nap under the shade of the local trees, away from the prying eyes of ordinary people.
In this article we will talk to you about how you can make a regular wooden chaise longue, we will give examples of photographs, videos and instructions.
First we select suitable look and modification of the chaise lounge. The main material can be plastic, wood, synthetic fabric and aluminum. We have chosen the most affordable option wooden sun lounger.
The choice of tree is based on the following principles:
When choosing future wood for your sun lounger, you pay attention to mechanical properties one type of wood or another. For example, the most durable wood species are considered to be: ash, oak, larch and beech. With them, the design will delight you for many years. Wood is distinguished not only by its durability, but also by its aesthetic component.
In turn, finished products made from noble wood are not the cheapest pleasure for the buyer. Such a thing is not always available to the average consumer who is trying to save every extra penny, because money is never too much. Before assembling the sun lounger with my own hands, look at the drawings of the sun lounger.
A hand-made chaise longue will not only be an example of prudent spending of funds family budget, but will also add zest to the appearance of your fabulous country garden.
Countless drawings, projects and ready-made solutions wooden sun loungers. Dimensions homemade sun loungers identical to industrial models.
A folding chaise lounge is much more comfortable than a regular one. It is easy to move around the area, and in winter it can be folded and put away, even cloudy weather will not create any interference.
Pre-purchased parts for the structures of the future sun lounger must be treated, we impregnate the wood with an antiseptic and an anti-corrosion compound. We grind the surface to a perfectly smooth state. We put the resulting details aside and begin to study the drawing.
If you turn to the latter, you will notice that crossbars are attached to the lower part of the legs. They allow you to fix the backrest in the desired position. When installing only one plank, it is first necessary to make cuts in the places where the planks are installed in increments of 5 cm, starting from 20 centimeters.
The back frame must have places for attaching bolts, we retreat from the edge on each side by 41 centimeters, and on the very base of the seat - 43 centimeters from the top.
First you need to assemble the frame for the back. The main load will be transferred to the 20 x 60 x 610 mm bar, so pay attention Special attention its consolidation. It should be recorded as efficiently as possible. It is customary to leave a distance of 1 centimeter between the slats. It will be needed to secure the fabric in the future.
Using the instructions described above, we assemble the main frame. Then, we connect 2 frames together - the back and the seat. Pay attention to the back frame, you need to drill a hole on it on both sides, the distance is 41 centimeters for the back and 43 centimeters for the seat. Screw the two parts together using nuts and bolts.
Attention! During regular use of the chair, the nuts may gradually loosen and unscrew. To avoid this problem completely, tighten the locknuts. For better fixation of the nuts, “Moment” or regular paint can be used.
To determine the degree of free play, first tighten the nut tightly and then gradually loosen it. Let the paint and glue completely set.
The next step is to mount the support for the backrest. The planks are secured with bolts and washers. Select for seats only thick fabric, the best choice would be tarpaulin, canvas and denim.
The fabric blank is folded in half and stitched with an indentation of 1.5 centimeters. After this, it must be turned out. We bend a piece of fabric on one side so that the rod can be inserted and stitch it. We do the same on the other side.
We push each end of the folded fabric between the slats and insert a rod into it. We will get a tightly fixed seat, and dismantling it for washing at the same time will not cause any problems.
The best way to relax after working in the garden is to lie on a lounge chair and drink juice. At the same time, it is important whether such a chair will fit into the environment around it and whether it will give a feeling of peace. If you can’t buy furniture for your garden, you can make it yourself.
But even before make your own sun lounger with your own hands, you need to select the type of this country furniture. You should also take into account that craftsmen do not recommend using plastic as a base for a sun lounger due to the lack of quality and fragility of this material. And here wooden base even and smooth will do just fine, although such a chair will be heavy. But this disadvantage can be compensated for by rollers installed on the legs of the chaise lounge.
The type of furniture depends on the design of the chaise lounge chair, namely:
A monolithic chaise longue is an armchair, the components of which are connected together during the manufacturing process and can no longer be disassembled. Such furniture is strong, durable and can withstand significant loads. But using this lounge chair is not very convenient. It is impossible to change the backrest angle, it cannot be folded, and therefore it is very difficult to move from one place to another.
Monolithic chaise lounge with inserts- this type of country furniture, made by hand, will certainly be beautiful, aesthetically attractive and neat. But these additionally inserted parts, which can be made from different materials, reduce the strength and reliability of the entire product.
A portable product, the design of which provides a mechanism that allows you to quickly and easily change the position and configuration of the entire chaise lounge. The tilt of the footrest, the tilt of the headrest and the back of the chair can be changed. This product can also be folded and made compact when transported to the country.
Chaise lounge chair on a base made of metal. This type of country furniture is difficult to make on your own, so it is usually bought ready-made. This product has a frame made of aluminum or steel, and a canvas made of fabric is attached to it. This summer cottage product is lightweight, compact, dirt-resistant and easy to carry.
In order to independently make a country chaise longue from wood, you should have the following tools and materials available:
For sun loungers made with your own hands, It is best to use wood sheets spruce or other pine needles. This material is moisture resistant and is not subject to the negative influence of temperature changes. Such wood is sold in building materials sales centers or made to order from carpenters.
Chaise lounge from wooden material can be made according to the size of your body or according to the size of the future owner. But you can use the standard size of the product, namely, sixty by one hundred and ninety centimeters. First you need to make all the necessary drawings. So, do-it-yourself chaise lounge drawings can be found on our website.
Once you have decided on the dimensions, you can start making a chaise longue: form the sides of the chaise lounge from the beams and form the frame of the product, securing its parts with the help of corners; cover all the outer sides of the created frame with boards; carry out the following stages of product assembly.
It is necessary to prepare the legs of the chaise lounge from bars of the required height. Standard height for the legs of the product it is approximately five to ten centimeters, but if necessary, you can use a different height.
The legs should be secured at a distance of five to seven centimeters from the edges of the long beams long screws. The rollers should be secured in the center of the legs with smaller screws (about three centimeters).
Electric jigsaw you should cut parts of the lattice for a country chaise lounge made by yourself. The most The appropriate size for planks is eight by sixty centimeters. Then you should screw the slats to the frame of the chaise longue for the summer house using spacers to obtain required clearances(from one to two centimeters). Having completed all these steps, the chaise lounge must be sanded and painted.
If you decide to make your own chaise longue, which will be folding, then the wood lattice will need to be divided into two parts, connecting them later with hinges for doors. Moreover, it is necessary to remember about the fastening bar, which must rest on the stand secured with screws.
One of the popular and at the same time in a simple way self-creation The key to making a country chaise longue is to make it from thick fabric on a frame. For a summer residence, this is a light and very comfortable product that can very quickly be converted from a chaise lounge to a chair and back to a lounger again.
Materials and tools for work:
You need to use dense fabric that is resistant to wear, water, and the effects of the sun. It can be denim, canvas, tarpaulin. In this case, the slats should be birch, oak or beech (as they are hard and durable).
To make a lightweight country chaise lounge yourself, you need to prepare slats of the required length and sand them. And then you should collect all the details.
Follows the drill make holes on the long slats for the selected bolts(you need to retreat from the edges from seven to ten centimeters); All defects must be sanded with a needle file. You need to drill holes in the head of the frame so that you can change the position of the backrest.
In order to make a seat, you should drill two more holes at the ends of the slats with long length; their diameters must coincide with the diameters of the round slats; to secure them more securely, the ends must be coated with polyvinyl acetate glue.
Then you need to connect the structures with screws that pass through top holes, and then secure it.
After this, you need to stretch the fabric, wrap its edges on the crossbars and sew it with strong thread (if this is done before final assembly chaise lounge, stitching the fabric can be done on a sewing machine).
This chair is original, it is completely assembled from blocks. It can be folded and stored away.
To make your own Kentucky chair you will need the following materials:
The Kentucky chair is assembled as follows. Ready the bars should be processed to give them strength and beauty, and also to protect against ultraviolet rays, water and wind. To do this, the wood is treated with stain (Beitz). For a chaise lounge, you should purchase an oil- and wax-based stain for exterior use. You can use parquet oil, which is suitable for any wood product.
After completing the preparation of all the bars, you need to clean all their edges with fine-grained sandpaper.
After reading this article You can make your own sun lounger without using the services of masters or the advice of your friends. This is not difficult if you do everything according to the instructions and carefully follow all its points. Learn to do everything yourself and improve your skills!
A simple chaise lounge made of wood. How to make a sun lounger with your own hands, photos, diagrams, drawings of a sun lounger, video.
A chaise longue is an indispensable attribute garden furniture For summer holiday on the bank of a river or in the country. You can make it yourself; in this article we will look at the process of making a simple and practical folding chaise lounge.
The design is quite simple; making a folding chair or chaise longue is not difficult.
How to make a sun lounger: drawings.
The picture shows a drawing of a folding chaise longue; if necessary, the dimensions can be changed slightly.
1 – rail 20 x 50 x 1300 mm – 2 pcs.
2 – rail 20 x 50 x 1930 mm – 2 pcs.
3 – rail 20 x 50 x 590 mm – 2 pcs.
4 – rail 20 x 50 x 580 mm – 1 pc.
5 – rail 20 x 40 x 520 mm – 2 pcs.
6 – rail 20 x 40 x 560 mm – 2 pcs.
7 – fabric 530 x 1400 mm – 1 pc.
8 – screw M8 x 50 – 4 pcs.
9 – screws 6 x 45 – 2 pcs., and 6 x 60 – 8 pcs.
Scheme of a folding chaise lounge.
How to make a sun lounger: materials and tools.
To make a sun lounger you will need hardwood: - birch, oak, yew, walnut, ash, beech, pear, elm or white acacia.
Hard wood is more difficult to process, but the chaise longue will be durable and will last you for quite a long time.
You will also need wood glue to attach the groove joints.
Tools you will need:
How to make a sun lounger.
We saw off the slats to the required length according to the drawings; it is advisable to round the edges of the slats. Grinding the slats sandpaper.
The figure shows frames “A” and “B” and the backrest tilt adjuster “B”.
We assemble the frames. We fasten the slats together with groove joints using wood glue; the joints must be strong and not wobble.
On frame “B” we cut out grooves to adjust the tilt of the back of the chaise lounge.
We drill holes for fastenings; the diameter of the holes for bolts is 8 mm.
We connect frames “A” and “B” with screws through the holes, then we connect frame B.
We assemble the frame.
We try on the fabric, stretch it, wrap it on the crossbars and stitch it by hand or with a sewing machine.
The chaise lounge chair is ready!
Making a sun lounger video.
In my own way functional purpose sun loungers are the same chairs, but more stable and low seat. You can relax in them in a semi-lying position, which allows you to relax your spine and all muscle groups as much as possible.
The undeniable advantage of sun loungers is their comfortable shape. The garden chair can be folded in such a way that it can be used for sitting or lying down, depending on the person’s personal preferences.
Traditionally, deck chairs for summer cottages are made of wood, because since ancient times it has been considered the most environmentally friendly, economical and easy-to-use material.
Sun loungers are ideal for observing nature as they are light weight and very comfortable. Therefore, it is not surprising that many owners install them in their gardens or dachas. Such furniture can stand outdoors throughout the summer, and winter period it can be put away in some suitable premises, for example, a storage room.
Most often, garden beds are made from materials such as:
If you don't want to waste time and effort on self-assembly garden lounger, you can always order it from a furniture showroom.
If you have finally decided to start making a sun lounger for yourself, then first it won’t hurt you to get acquainted with the main types of sun loungers for your dacha. There are quite a lot of them, so only the most popular ones will be discussed below:
These are just some of the sun loungers that you can purchase for your summer cottage. If you wish, you can make your own chaise lounge in the form of a swing, and also using ordinary tree branches as material. It all depends on your preferences.
First, you need to prepare a certain set of materials and tools that you will need to make a homemade sun lounger:
When going to the store to buy boards and slabs, we advise you to choose material made from softwood. It withstands the negative effects of precipitation much better and has a wonderful aroma.
Now that you have everything you need prepared, you can proceed to assembling the wooden lounger.
You should first decide on the size garden chair. you can use finished drawing or create it yourself. Typically standard sun loungers measure 60 x 200 cm.
Now you can start making the frame. For it you will need bars, from which you need to make four sidewalls - two of them should be 200 cm long, and two more should be 60 cm long. The finished sidewalls must be subsequently connected to each other using fastening corners.
WITH outside the frame must be sheathed with a board 2.5 cm wide.
We take the long sidewalls and attach 4 legs to them, having first stepped back 8 cm from the edge. The legs can be made from beams 10 cm long. We use self-tapping screws to attach them to the frame.
Having finished making the frame, we begin to assemble the lattice. For it we need wooden slabs, from which we need to cut boards measuring 60 x 10 cm using a jigsaw.
We attach the boards to the chaise lounge frame using self-tapping screws. Be sure to leave a gap of about 1.5 cm between the boards. Then the lattice of the sun lounger will look neat and beautiful.
If desired, you can make a chaise lounge with an adjustable back. In this case, the lattice must be divided into two parts. One of them will serve as a lounger, and the other as a headboard. We mount both parts to the connecting boards. To securely connect elements, it is best to use door hinges.
So that the headboard can be fixed in a certain position, the frame design with inside a crossbar should be added. You need to attach a support post for the headboard to it using self-tapping screws. If you don’t have one, you can buy it at any hardware store.
Now that your homemade summer cottage is ready, all that remains is to sand the boards, cover them with drying oil or special paint and varnish material for protection against moisture.
If for some reason a wooden folding lounge chair is not suitable for you, then you can try making a fabric lounge chair instead.
To make a sun lounger from fabric material you will need the following:
To make a frame lounger, it is best to use tarpaulin, camouflage or denim fabric. They have sufficient strength and are resistant to wear.
Now you can proceed directly to assembling the fabric lounger.
As you can see above, making a chaise lounge for a summer house from fabric is no more difficult than a similar lounge chair made from wood.
Perhaps some summer residents will not want to spend time and money making a sun lounger with their own hands. In this case, you can go to the store and buy a ready-made garden lounger. The furniture showroom will offer you a variety of such products to choose from. Surely among them you will find how budget options, so unusual execution designer models sunbeds for the street.
After studying the proposed options and comparing their characteristics, all you have to do is decide on the amount you are willing to pay for a sun lounger. The cost of such sun loungers depends on the size and material of manufacture:
When traveling to the dacha, many are warmed by the thought that they will have the opportunity to lie down on the floor for at least a few minutes. fresh air and enjoy the surrounding nature. But everyone has the power to make their vacation more enjoyable if they prepare a place for it in advance. To do this, you must have special furniture like a chaise lounge.
The easiest way is to buy such a sun lounger at the nearest furniture store, although some owners often make their own sun loungers and thereby save a lot. You can do the same, especially since you don’t need to have special skills and knowledge to do this. Even the most ordinary wooden deck chair for a summer cottage can be made from a material that is likely to be found in any household.
But in any case, you will have to prepare for this work, because without drawings you are unlikely to be able to make exactly the chaise longue that you want, especially if you do not have the slightest experience in this matter.
A homemade chaise longue for a summer house is much preferable to a store-bought lounge chair, because you can decide for yourself how it should turn out, and upon completion of the work, decorate it at your discretion. Of course, this will require some effort on your part, but in the end all this will be compensated by the comfort that your homemade chaise lounge will provide you with.
The summer season is approaching and it's time to think about creating a chaise lounge with your own hands. It will allow you to enjoy your outdoor recreation to the fullest.
Chaise longue in French means long chair. This is a chair for relaxing. It can, at the owner’s request, change the position of the backrest.
DIY chaise longue
Sun loungers are widely used on beaches and by pools. On personal plots, dachas.
Sun loungers are made from various materials:
Wooden sun loungers are the most popular and environmentally friendly. They come in a variety of shapes and designs. The disadvantage of monolithic wooden sun loungers is their weight. But this problem can be solved with the help of wheels.
Plastic sun loungers are characterized by easy mobility, ease of maintenance, and relatively low cost. Their minus is their fragility.
Fabric loungers are versatile and comfortable. Their frame is made of wood, metal or PVC pipes. They fold easily and do not take up much space.
Rattan sun loungers look great in the lap of nature. They are environmentally friendly. However, purchasing them is expensive. If you have sufficient skills, you can simply weave a rattan lounger yourself.
In this article we will tell you how to create wooden sun loungers with your own hands.
Solid models are heavy. Therefore, to make it easier to carry, wheels are added to the headboard. Further instructions will help you make a chaise lounge on wheels with your own hands.
You will need tools:
When choosing a tree, pay attention to conifers. They are sold at affordable prices, are characterized by increased water resistance.
Materials needed for a sun lounger:
We suggest you make a chaise lounge according to this pattern.
Legend:
You can independently determine the size of the desired sun lounger and make calculations. Or use standard size 60x190 cm. It is the most optimal and ergonomic for the average adult.
We assemble the base frame from the bars. We secure the load-bearing parts with corners similar to those that secure the base of the bed.
We sheathe the resulting frame with pre-prepared and sanded boards.
We make blanks for the legs from timber. Their height usually ranges from 5-10 cm. Choose one that is comfortable for yourself and your household.
We drill holes with a drill, retreating 5-7 cm from the ends of the longitudinal sides. We secure the legs with long bolts. We control the horizontal side with a spirit level.
We screw the wheels to the center of the legs with bolts with a diameter of 30mm.
Let's start cutting the lattice elements. Use a hacksaw or jigsaw to cut 8x60cm boards.
Using self-tapping screws and a screwdriver, screw the slats to the chaise lounge frame. Since the boards are not screwed tightly, we use spacers to obtain even gaps.
We should have two parts. The smaller one is intended for the headboard. We connect both grilles with door hinges. We install a support bar under the opening part.
All that remains is to sand off the production flaws. Apply wood primer. Paint it in your favorite color and the chaise longue with your own hands is ready.
For more comfortable rest You can sew additional mattresses that fit the size of the bed.
To create a wooden chaise lounge with your own hands, you need the following materials, as well as tools:
Wooden beams used in the work:
The first priority is to create a very strong frame. We take two parts 215 cm long, connect them with screws to half-meter transverse parts.
Let's move on to sitting. Take all the 60 cm slats. Attach them to the frame with self-tapping screws, leaving small gaps. To ensure that the gaps are even and uniform, use spacers 1 cm thick.
We create the legs of the lounger. To give maximum stability to the chaise longue, two legs are nailed at once at the legs. One at a time at the head. The instructions indicate bars with a height of 35 cm. But you can choose a height that is comfortable for you
We make the back from 2 boards measuring 88 cm and 3 - 39 cm. The resulting frame should easily fit into the base, leaving a small gap between the structures.
We securely fasten the longitudinal strips. We round them for a more beautiful look.
Attach the backrest to the base of the lounger. To do this, you need to drill holes at a distance of 9cm from the edge of the seat. Secure with pins.
We make 2 grooves at the base of the sun lounger for the support bars. The first 5x10 cm notch should be approximately 9 cm from the stud. The second is 20cm from the first. But its depth will be only 5x5 cm.
A 60cm beam is inserted horizontally into the first recess. To change the position, the board is transferred vertically to the second recess.
Sand all rough edges and imperfections. Process it. Cover with paint or varnish. The chaise lounge is ready with your own hands.
>Video DIY garden lounger
A chair with a frame complemented with fabric is one of the most comfortable budget types sun loungers. It is convenient to fold and easy to carry. Can be stored in flat view. It takes up little space.
To create a sun lounger with your own hands you will need:
Choose materials carefully so that your work is not in vain. Hardwood blocks are perfect for a sun lounger. Choose:
Choose fabrics with maximum strength. Great fit:
These materials have increased wear resistance and will last you a long time. Let's move on to creating a sun lounger with our own hands. The base consists of three frames:
Cut the boards to the required length. We sand with sandpaper.
In the longitudinal bars we make indents of 70 and 40 cm, and drill holes with a diameter of 8 mm with a drill, just like the bolts. Sand with a round file.
We make cutouts in part B. They will allow you to change the position of the back later. To do this, retreat 7-10 centimeters. It is necessary to cut 3 or 4 recesses. We polish well.
According to the diagram, we drill holes in the bars to connect the parts.
Assembling the base of the lounger. We connect frames A and B using screws. Then we connect frames A and B. For greater reliability, we lubricate the ends of the round slats with PVA before assembly. The frame of the sun lounger is ready.
Now you need to sew the seat. Place the material on the bed in the folded position. The fabric should be slightly stretched. Measure the desired length. Hem the edges. This way you will increase the wear resistance of the material. The chair will look neater.
We attach the fabric base to the lounger. We wrap round slats on parts A and B. We nail them with small nails with round heads. The chair is ready.
ADVICE. The edges of the fabric base can be made in the form of loops. In this case, the seat is simply strung on slats.
For this chair you will need:
Process all the details of the future chair in advance. Sand them using a machine or fine-grained sandpaper. Cover with special impregnations that protect the wood from corrosion. Appreciate your work.
Pay attention to the drawing. The crossbars at the bottom of the legs help fix the position of the backrest. Make them. Or cuts, retreating from the edge by approximately 20, 25, 30 and 35 cm.
Drill holes for the bolts in the back frame. To do this, measure 41cm on each side.
On the seat frame, step back 43cm from the top. Make holes.
On the piece supporting the back, drill holes in the center of the edges.
Process all holes with a needle file round.
First assemble the back frame. A beam 61 cm long will carry a large body load. Secure it as securely as possible. Leave a small gap between the two slats. The tissue will be fixed through it.
Assemble the seat. Fold it with the back frame. Be sure to place a washer between them. Bolt the frames together.
ADVICE. To prevent the nuts from loosening quickly, tighten an additional lock nut on top. For greater reliability, attach the nuts to glue, varnish or paint. First tighten the nut. Then loosen it slightly so that the parts rotate freely.
Install the back support piece using washers and bolts.
Sand away all imperfections. If desired, varnish or paint.
Fold the fabric in half, sew, retreating 1.5 centimeters from the edge. Turn it inside out. Fold the edge of the material for the rods that secure the panel between the slats. Sew.
Now insert the material between the slats. Secure with a rod. This installation model allows you to remove the fabric for washing without much effort.
Another example of a lounger with a fabric base. Only in in this case wooden slats are replaced with PVC pipes. Chair sizes may vary.
In this do-it-yourself chaise lounge model we used:
Connect first for vertical bar PVC pipes lengths 30 and 45cm using a T-connector. Place L-shaped connectors on the ends. Connect the second vertical in the same way.
Now you need to connect the two sides together. Please note that one horizontal crossbar is solid. Its length is 66cm. It is attached closer to the T-shaped connection, which in turn should be directed into the structure. The second side consists of two 30cm pipes, combined with a T-shaped adapter, turned at an angle of 45 degrees from the long side of the strip.
Do not hurry. Measure pipes accurately. As a result, you should end up with a rectangular structure.
Now is the time to make the connection on which the seat will rotate. To do this, insert a 5cm long pipe into the T-shaped connector and secure it with another T-shaped adapter. It will become the basis of the horizontal frame.
Make the long sides similar to the vertical section, using 30 and 45 cm pipes with an L-shaped connector. For crossbars, use a solid tube 30cm long. And also consisting of 2 x 20 cm with a T-shaped adapter.
You did everything right if you get a rectangle within a rectangle.
The seat is located between a long section of the vertical section and a short section of the horizontal section. Adjust the level of inclination that is comfortable for you. Measure the distance between the two free T-pieces. Cut the pipe to the required length. Insert the rear support.
Take measurements of the fabric consumption for your chair. Use thick fabric. For example, canvas, tarpaulin, jeans. Hem the edges and secure the fabric to the chaise lounge. Enjoy your holiday.
The durable, lightweight chair is quickly assembled and disassembled. It is convenient to take it with you outdoors. The model is so easy to make that it is suitable even for novice craftsmen.
The collapsible chair consists of 2 parts:
In addition to tools, the following materials are used:
The procedure for assembling a portable sun lounger is shown in the diagram.
First, the parts are connected using self-tapping screws and a screwdriver.
The workpiece is processed and varnished.
While the frame dries, the fabric is folded and stitched. Then it is nailed using staples and a construction stapler to a wooden piece.
We connect the back and seat of the chaise lounge.
Enjoying your holiday in your new armchair.
Design Koalition has developed an unusual chaise lounge with a fabric canopy that will allow you to enjoy outdoor recreation even on a hot day, protecting you from the scorching sun. The cost of such a sun lounger is 5970 euros. We will tell you how to save money and make an original chaise lounge with your own hands.
To create a lounger you will need the following materials. And also tools:
Let's start creating a sun lounger.
Transfer the diagram onto cardboard or thick paper. To make the task easier, you can first draw it into squares of 10 by 10 cm. The template makes it easy to correct all the shortcomings on paper. Subsequently, you will only circle it 2 times. Or maybe you’ll get the hang of it and make a few chairs for relaxation.
We transfer the drawing onto sheets of plywood and cut out the side parts of the disk or band saw. At the junction with the round beam, we cut out recesses with a diameter of 30mm.
We sand all the unevenness and cutting defects.
We assemble a rigid structure. Lubricate the ends of the beam with wood glue or PVA. We insert the timber into the recesses and fasten it with screws. The joints can be additionally treated with glue for maximum reliability.
Now you need to put the structure on its side. Place weights on the gluing areas. And let the chaise longue dry completely.
We begin to screw the planks to the ribs of the structure. At the same time, we make a 10-12 cm long indentation between them. Tighten the screws deeper so that their heads do not cling to the fabric and tear it.
We sand the product again. Now we hide the assembly flaws.
Use wood putty to hide all the screw heads in the places where the fabric is tensioned. We paint the chaise lounge.
You probably noticed that the description only gives the approximate width of the awning. The fact is that you can decide to cover the chaise longue entirely with fabric, or just make a canopy. Decide for yourself. Measure the dimensions and sew the awning.
ADVICE. It is better to fasten the awning with ties or Velcro. This will allow you to remove the fabric at any time and wash it without problems.
(18
ratings, average: 4,22
out of 5)
What summer resident doesn’t dream of relaxing after a hard week of work on his property, taking a comfortable position on a comfortable folding bed? However, a chaise longue is not a cheap pleasure if it is really high quality and good. What to do for those who good sun lounger Can't afford it, but you still want to relax? Don't be content with little: put the uncomfortable bench or chair aside.
This article will cover instructions and step-by-step explanations, and even an amateur carpenter will be able to make a lounger with his own hands, which can even be taken on fishing trips. The chaise longue will fit harmoniously into your country house exterior and will become an integral part of your holiday.
A chaise longue is similar to a wooden chair, but is reliable and smaller in size. It is convenient because a person can take a position that is suitable for the spine and spinal muscles. One more no less pleasant fact is that the back of the garden chair is adjustable. The garden lounger is quite mobile: in summer period it can be located in the garden on the site, and in winter - somewhere in the house.
In order to make folding wooden chairs, required:
The traditional size of a chaise lounge is 60 x 190 cm, but you can choose the one that will suit your parameters. You should start with a schematic representation of the future chair, drawings must include all the nuances. When a decision has been made on the appropriate size, you can begin to prepare the parts.
You need to prepare the bars for the legs - 5-10 cm. Next you need to attach the legs, stepping back from the edge of the bars 5-7 cm, and rollers to them.
Parts of the grille for the chair must be made using a jigsaw. For them optimal size will be 8 x 60 cm. Spacers will help make a suitable distance from 1–2 centimeters so that the planks can be screwed to the frame. After all this work has been done, the chair needs to be sanded and varnished or painted.
If desired, you can also make a folding country chair. In this case wooden grate must be divided into 2 parts, which then you need to connect with help door hinges. Also, do not forget about the mounting strip, which must be installed so that it supports the stand screwed with screws.
The easiest way to make a chaise longue with your own hands is a chair made of dense material on a frame. This optimal choice For summer cottage , since it is quite multifunctional: in a matter of seconds you can turn your country chair into a chair.
Necessary materials:
For a folding country chaise lounge, fabric of sufficient density is suitable, good quality and not exposed sun rays and moisture. You need to choose denim, canvas or tarpaulin.
Work needs to begin with preparing the slats suitable size and polishing them, and after that you can begin assembling all the elements.
Need to drill holes for bolts the right size on long beams, remove all irregularities by sanding. Then in a place located in close proximity to the head lying, it is necessary to make the same holes so that you can change the bending angle.
At the ends of the long beams, two holes must be made through which the seat will be made. Diameter round beams should be the same as the diameter of the long ones. For a better connection, coat the ends with PVA glue.
Connect all the resulting elements with bolts through the holes made in the headboard.
After the above steps, you can begin the finishing touch - stretching the fabric. Stretch the fabric over the frame products, secure the edges to the crossbars with thick thread (if you decide to sew the fabric before attaching it to the frame, you can use a sewing machine).
This chair, perhaps, can be called even more interesting than the previous ones, because it will really decorate your teacher. Assembly of the Kentucky chair is carried out only using bars.
In order to make a chair, you will need the following materials:
You need to start with processing the wood in order to prevent its destruction, fading, and protect it from moisture, sunlight, and wind. At this stage you you will need a special mixture for deep impregnation of wood for the purpose of coloring (stain). It should be specifically for working with exterior objects. You can also use parquet oil, suitable for wooden objects. After completing this stage, you need to sand all the bars.
The holes need to be made with a diameter of six millimeters.
