Knauf has been working for 70 years to create thermal insulation materials made of fiberglass, and today its range continues to expand. Mineral wool of new and improved series enters the market, less effective and “morally obsolete” ones are discontinued. Currently, the Knauf company offers builders glass wool, which is superior in its insulating characteristics to basalt. At the same time, it is absolutely environmentally friendly, characterized by minimal water absorption and dust formation. Let's look at the new products in this review.
TeploKnauf is a series designed for use in private low-rise construction. Available in the form of soft rolls and slabs, compressed in packaging 2-8 times. This simplifies and reduces the cost of transportation, but requires patience from buyers: after removing the film, the cotton wool needs to be given several days for the elastic fibers to straighten and restore their original volume.
To increase the hydrophobicity, Knauf mineral wool is impregnated with water-repellent compounds in production. The slabs have a size of 61x123 cm, which allows them to be tightly installed between the rafters with a standard pitch of 0.6 m without the use of additional fasteners. Builders in their reviews especially note the tenacity of the fibers that hold the slab in wooden frame.
Most of the materials in this Knauf line are positioned by the manufacturer itself as “3 in 1” insulation, which retains heat, absorbs noise and protects against dampness. This is probably why they are so expensive.
For serious objects, the company produces a separate Knauf line Insulation. It appeared on the market a little earlier, so there are already a lot of positive reviews about it. Main types:
Knauf mineral wool for pitched roofs is represented by a whole family of insulation materials. For rafter system For roofs with a large slope and attic superstructures, you can buy more rigid slabs; for attic floors and flat surfaces, it is more convenient to use soft rolls, laying them on a solid base.
Knauf Insulation Pitched roofing:
Despite the unambiguous name of the series, Knauf Insulation mineral wool is used not only for pitched roofs, but also for insulating attic floors along joists. In any case, you should not allow loads to be applied to the insulation layer.
Facade insulation is produced only in rigid mat format and has improved energy-saving characteristics. In addition, Knauf Insulation ThermoPlate 032 has a higher degree of moisture protection and absorbs up to 0.6% of water from its volume when partially immersed. For products with index 034, the same figure is 0.8%. At the same time, the density of Knauf 032 slabs is noticeably lower (25 kg/m3 versus 34). But the size of the mats is the same for the entire series: 1.25x0.6 m.
Thermo Plate | Thermo Roll | Knauf Acoustic | Pitched roof | Facade | |
Thermal conductivity, W/m K | 0,037 | 0,04 | 0,037 | 0,034 | 0,032 |
Density, kg/m3 | 15 | 11 | 15 | 15 | 25 – 34 |
Permeability, mg/m h Pa | 0,55 | 0,5 | |||
Water absorption,% | 0,8 | 0,6 – 0,8 | |||
Package volume, m3 | 0,9 | 1,2 | 0,915 | 0,57 | 0,6 |
Cost, rub/pack | 950 | 1500 | 1060 | 500 | 1060 |
Both presented families are made from glass wool, Although specifications Knauf really exceeds the performance for basalt insulation. And the price is not lower. However, we should not forget about the main “diseases” of fiberglass: fragility, gradual loss of volume and allergenic dust. It is precisely with regard to the latter that builders have more than once expressed the opinion that this problem has not been completely resolved.
Reviews
“At one time I already had the opportunity to insulate myself with cotton wool of this brand. I used Knauf Cottage, but in vain I was counting on the manufacturer’s promise of “dust-free work.” After coughing for about an hour, I went to arm myself with gloves and a mask. But this cotton wool really has an effect. At my dacha it’s usual stove heating, so in terms of firewood consumption in the first winter there was a savings of about 25-30%.”
Artem, Moscow region.
“I used Knauf ThermoRoll for the roof and attic - I brought the whole batch in my Niva. True, we had to wait for fine days to unpack the insulation and leave it to “rise.” It took about 3 days, I thought Knauf mineral wool takes shape faster. As for the dust, there is some, but it’s quite possible to work with your hands. But it’s really better to cover your face with a mask and goggles.”
Roman, Ekaterinburg.
“I also used Knauf Cottage - and then it was a bit expensive, and now it’s not the most cheap option. But that's it positive reviews fully deserved by her. There are no problems with installation, it cuts perfectly if necessary, fits tightly into the frame. Two years have passed since the insulation with Knauf cotton wool: the house has really become more comfortable, and on the first floor we managed to get rid of the ever-growing fungus.”
Oleg, Omsk.
“I am very familiar with this material – I helped both my sons with insulation. Now I have come to my senses. I decided to buy for the roof Heat Knauf, but I needed a thickness of at least 15 cm. First I threw 50 mm mats into the rafters. While my son was holding them so they wouldn’t fall out, he put another 100 mm sheet underneath - there was no other way.”
Yuri Pavlovich, Moscow.
Every consumer today is trying to save money. This applies to different spheres of human life. For example, not only for construction own home, but also to its operation. If you do not want to overpay for heating, it is recommended to insulate the building. This is especially true for large cottages.
For this on the market building materials Today there are a huge variety of solutions available. Among others, we should highlight the “Teploknauf” insulation, which will be discussed below. It attracts buyers for many reasons, among them quality and low cost.
This material is a professional insulation material that comes in the form of rolls. The thickness is 150 mm. Thermal insulation is characterized by an enhanced water-repellent effect. It is specially designed for pitched roofs.
“Teploknauf” roof insulation has an elastic structure that allows it to fill the space under the roof. This material is comfortable to use and safe, as it does not contain acrylic resins or phenol-formaldehyde. Made using water-repellent impregnation.
The slabs cut well, are easy to install by surprise, and are not flammable. If you are interested in Teploknauf insulation, you should definitely consider the technical characteristics of this material. As for thermal insulation for roofing, it is presented in another variety - “For ROOF+”. In this case, the thickness is 150 mm, while the length and width are 5500 and 1220 mm, respectively.
The volume in one package is 1 m3. The area of the package is 6.71 m2. This material is not flammable, like “Teploknauf for roofing”. The latter variety has a thickness of 50 mm, while the length and width are 6148 and 1220 mm, respectively. The package volume is 0.75 m 3 , while the area of the material in the package is equivalent to 15 m 2 .
The materials described are durable; they can last more than 50 years. The materials do not have an unpleasant odor, are resistant to adverse conditions and perform their functions perfectly even if errors were made during installation. Teploknauf insulation is resistant to insects and rodents.
As practice shows, “Cottage” is the most innovative and warm solution for houses whose owners choose best options, but are not used to overpaying. The material is fireproof, highly elastic, and is created using “three-in-one” technology.
“Teploknauf Cottage” insulation, the characteristics of which will be presented below, is suitable for protecting a home from noise and cold. The material has excellent water-repellent characteristics. This type of thermal insulation can also be used to insulate pitched roofs. The material is excellent for soundproofing rooms.
Depending on your preferences, you can choose thermal insulation in the form of rolls or slabs. "Cottage Plus" is a 100 mm insulation, which is cheaper than two layers of 50 mm. Labor costs during installation and cutting of material are reduced, and less scraps and debris are generated during the work.
Thanks to increased elasticity, the fastening in the structure is more reliable. This is also due to the solid structure of the material. As practice shows, the thickness of the elements building structures usually a multiple of 100 mm.
The described insulation "Teploknauf" for roofs and walls in slabs has following parameters: 1230x610x50 mm. The volume of material in the package is 0.6 m3. As for the area in the package, it is 12 m2. There are 16 slabs in a package. As for the rolled “Cottage”, its length, width and thickness are 6148x1220x50 mm, respectively. The volume of material in the package is 0.75 m 3, while the area is 15 m 2. There are 2 rolls in the package.
Insulation "House Teploknauf" is a comfortable-to-use slab that is used to insulate floors and walls. Thermal insulation is created using the 3D elasticity technology, which is popular today and has already proven itself. The material adheres well to the structural elements and eliminates the formation of cold bridges.
“Teploknauf Dom +” insulation is a 100 mm material that has many advantages. For the same area, it is cheaper than two layers of 50 mm each. During installation and cutting, labor costs are reduced, and fewer scraps and debris are generated. Thanks to the solid structure, the material is more securely attached to the structure.
Taking a closer look at the “Teploknauf House”, you can understand that its length, width and thickness are 1230 x 610 mm, respectively. One package contains 0.6 m3 of material. As for the thermal insulation area, it is limited to 12 m2 in one package. There are 16 canvases in one package.
This material is also non-flammable, like Dom Plus. The Teploknauf Dom Plus insulation has the following parameters: 1230 x 610 x 100 mm. The volume of the material remains the same, but the area decreases and becomes equal to 6 m2. There are 8 canvases in one package.
Before purchasing Teploknauf insulation, it is recommended to read reviews about it. "Teploknauf Expert" is no exception. It consists of thermal insulation, which is compressed in the packaging. This makes it possible to reduce transportation costs, which consumers really like, as well as the fact that thermal insulation is convenient during installation: it does not generate dust when cutting. It is environmentally safe and is also non-flammable.
“Expert” is used for floors, partitions, interfloor ceilings and attic floors. The density of the material is 20 kg/m3. When purchasing “Teploknauf Expert” insulation, consumers emphasize that the price of this product is acceptable and amounts to 690 rubles. per package or 1413 rubles. per m 3. There are 8 slabs in one pack, that’s 4.88 m2 or 0.488 m3.
Consumers emphasize that the insulation is mineral wool. It is created for DIY networks and has enhanced heat-protective and sound-proofing properties, compact packaging sizes and 3D elasticity. The material is structurally stable, has an attractive price and is a popular and affordable solution for private housebuilders.
This insulation is excellent for unused attics, soundproofing interior partitions, insulating interfloor ceilings and floors. The plate is presented in two versions, the first has a thickness of 50 mm, while the second is 100 mm.
Today no one will remember how long mineral wool has been used to insulate houses and buildings for various purposes. This material is also called stone wool and is offered today by many manufacturers. This thermal insulation is one of the most reliable, which is why it lasted so long on the market. For several decades, the material did not give up its positions.
ABOUT high quality mineral wool It also says that it remains popular, despite the fact that today they are entering the market innovative solutions for thermal insulation. Having familiarized yourself with the market of modern building materials, you can understand that the products of the Knauf company occupy a fairly large share of it. This supplier produces mineral wool, the technical characteristics of which will be discussed below. If you also decide to purchase the material described, you should also read the reviews. They will definitely help you do right choice.
Mineral wool “Knauf” is also called and is made, no matter how funny it may sound, from stones. This material is also called basalt wool, in the production of which stones of lava origin are used. They are melted down and then added to them. Fibers are formed into rolls or solid slabs.
Can be manufactured according to different technologies using different materials. The production process affects the technical characteristics of basalt and mineral wool. Traditional mineral wool is good, but can be susceptible to moisture, dust and be harmful. All these troubles were overcome within the framework modern production. As a result, it is possible to obtain an almost ideal insulation.
Knauf mineral wool is produced without the use of formaldehyde and phenolic resins. Almost everything negative reviews about the dangers of mineral wool were previously aimed precisely at the fact that when exposed to high temperatures the material begins to emit phenol fumes, which are quite toxic.
The material described does not contain harmful resins, and therefore no harmful fumes. The same can be said about the ability to emit dust. It negatively affects a person's lungs and irritates the skin. However, most often mineral wool does not generate dust. This characteristic is characteristic of glass wool. However, if the mineral wool fibers are poorly formed, they can break, which causes the release of dust.
The thermal insulation described in the article quite easily copes with the effects of temperature changes. It does not burn and is not permanently deformed. If you decide to purchase this thermal insulation, you should inquire about thermal conductivity. For mineral wool, this parameter varies from 0.035 to 0.4 W/m. This indicates a low level of heat transfer. As practice shows, cotton wool does not transfer heat. It cannot cope except with thermal radiation, but for this purpose other insulation materials can be used, which can also be combined with mineral wool.
Knauf mineral wool, the characteristics of which you should study before purchasing this insulation, has low water absorption. Of the total volume, the amount of water can be approximately 2%. If we translate this value into simple language, then after the slab is in water for several days, it will absorb only a few percent of the liquid compared to the total volume of the material. This indicator is insignificant, which allowed mineral wool to stand on a par with polystyrene foam. With all this, the thermal insulation remains vapor permeable.
Knauf mineral wool, the technical characteristics of which are presented in the article, does not burn or heat up. It can only become charred, but only when directly exposed to fire. It is also important to pay attention to density. This parameter may vary. There are several varieties of branded insulation on sale.
Thermal insulation “Cottage Plus” from the Knauf company is offered for sale in the form of slabs. Their thickness is 10 cm, and the thermal conductivity is 0.037 W/m*0C, which is true at 10°C. This one has an airborne noise insulation index of 45 RW (W). The length and width of the material are 6148 mm and 1220 mm, respectively.
This mineral wool "Knauf", the price of which is 1600 rubles. behind cubic meter, used for thermal insulation of communications. The material is quite flexible, which ensures a tight fit and eliminates the formation of Acoustic Knauf mineral wool is capable of maintaining its original shape for a long time, which guarantees high level soundproofing.
This material is characterized by an increased level of elasticity. This allows you to reduce the level of impact and sound noise by up to 1.5 times. Installation of this thermal insulation can be carried out in ceilings and partitions, as well as suspended ceilings.
Mineral wool materials from the manufacturer Knauf can be divided into two lines:
Each of them is used to solve specific problems and was developed for their implementation. Consumers love the Iinsulation line because it is of exceptional quality. This material, according to buyers, is professional and quite expensive, but has one important advantage - versatility. According to home craftsmen, it is convenient to install it on a large scale when there is a need to process multiple areas.
The Insulation line has excellent characteristics and is durable. This type of mineral wool can protect a home for several decades. The manufacturer itself provides a forty-year warranty. This does not mean that after this period there will be nothing left of the slab. It will be ready to serve for a longer period, but only on the condition that the cotton wool has been used under normal conditions.
Mineral wool "Knauf", reviews of which should help you make the right choice, is also offered for sale in the "Teploknauf" line. Consumers like that this insulation is simpler and can be used for domestic purposes. With its help, consumers finish country houses and small cottages.
Insulation with Knauf mineral wool is carried out by home craftsmen independently. Use this material possible for thermal insulation of the facade. The work may be based on wet-type technology, which combines facade insulation And decorative plaster. This technique is actively used in places with cold climates.
The wall materials can be:
Quite often used as plaster different types compositions. Mineral wool is placed under a decorative wet layer, which makes the structure stronger and helps save money on heating. Plaster can be:
After drying, the layer can be painted in any color using facade paint.
At the first stage, the facade is cleaned and freed from unnecessary elements. There should be no metal pins on the wall, as they will become rusty. If it is not possible to get rid of metal, then decorative plaster should not be used to decorate the house. Before installing mineral wool on the walls, profiles should be installed. It is important to ensure that the planks are securely fastened. Using special glue, mineral wool is installed on the surface. The thermal insulation should additionally be covered with a reinforced layer, which will prevent deformation of the insulating materials. Using a spatula, an adhesive layer is applied to the surface, onto which a reinforced mesh is attached.
Knauf mineral wool is made with high quality, so craftsmen will not feel any dust when working with it. There is no need to additionally protect the layer of such thermal insulation. Previously, consumers sometimes refused to purchase mineral wool rolls for another reason that they absorbed water in large quantities. However, these negative characteristics were eliminated over time. Today, during the production process, water repellents are added to the fibers, which are able to repel water. That is why Knauf mineral wool receives only positive reviews.