Products trademark BAS is fully certified and labeled. Acrylic and hydromassage bathtubs and shower cabins BAS have proven themselves excellent in Russia and the CIS countries. The reason for this is the impeccable quality and reasonable price. Today this is the best offer in terms of price/quality ratio.
BAS brand products are fully certified and labeled. Acrylic and hydromassage shower cabins BAS have proven themselves excellent in Russia and the CIS countries. The reason for this is the impeccable quality and reasonable price. Today this is the best offer in terms of price/quality ratio.
All products are manufactured on Italian equipment from multilayer Sanitary Acrylic/ABS sheets polymer material Austrian company "Senoplast" on Italian vacuum forming equipment. Bathtubs and shower cabins of the world famous brands “Jacuzzi”, “Teuco”, “Albatros”, “Villeroy&Boch” are made of the same material.
In Europe and others Western countries BAS have long earned consumer trust. Cast iron and steel baths have become a thing of the past because they are inferior in many characteristics. Acrylic bathtubs are more resistant to mechanical damage, are much easier to clean and do not lose their color over the years. In addition, they are very pleasant to use and retain heat well while taking a bath.
Acrylic baths BAS there are different colors, which helps you choose what best fits into the design of your bathroom.
If you want more than just a bath, BAS hot tubs are available. By purchasing a hot tub, you will have a personal medical office. Hydromassage relaxes, improves blood circulation, and even improves immunity. It is used for both medicinal and cosmetic purposes. The BAS hot tub is not only useful, but also brings a lot of pleasure.
So you've decided to buy acrylic bath. Perfect solution! In this article we will give you the 5 most important advice, which will help you make the right choice so that your bath will give you only pleasure and benefit for many years.
When choosing an acrylic bathtub, everything depends only on your desires and financial capabilities. In order not to get lost in all the variety of bathtubs that currently exist, it is worth understanding a few key points, which will make your further search easier.
Tip 1: Prices vary
Like any product, acrylic bathtubs vary in price. Now on Russian market There are a large number of manufacturers of acrylic bathtubs, offering from the cheapest to the most expensive models. The price of a bathtub is influenced by the quality, size of the bathtub, and its design. The lower price limit for an acrylic bathtub is now about 8 thousand rubles. The upper one has practically no limit.
Tip 2: Make your design dreams come true
One of the main advantages of acrylic bathtubs is the wide variety of designs. Your acrylic bathtub can be of almost any shape, from the classic rectangular to the unusual asymmetrical one. This variability allows the buyer to install a bathtub even in the smallest room, as well as to implement any design ideas. If you dream of a sophisticated and stylish acrylic bathtub, pay attention to the design of bathtubs from Italian manufacturers.
When choosing an acrylic bathtub, decide what space in your bathroom it will occupy; the size of the bathtub depends on this. For small room An ergonomic bathtub measuring 120x70 is suitable, and for a more impressive space you can choose a more impressive size, for example 190x120.
Tip 3: Special attention quality
When choosing a bathtub, first of all check the availability of all certificates, and also find out what polymer the bathtub you like is made from. There are two types of polymers that are used to make acrylic bathtubs. 
The first - ABS/PMMA - is a combination of two types of polymers - acrylonetrile butadiene styrene and polymethyl methacrylate, combined by coextrusion, that is, combining materials with different properties. The thickness of the acrylic layer in such baths is only 5-10%, everything else is ABS polymer, which has a number of disadvantages - relatively low density, tendency to absorb moisture, roughness and porosity of the structure. Such baths are usually cheaper, but be prepared for the rapid appearance of microcracks, chips, and loss of appearance. The service life of such baths is only 3 years.
The second type of material is 100% cast homogeneous acrylic, that is, polymethyl methacrylate. Bathtubs made from such a polymer have all the qualities necessary for a bathtub - wear resistance, high strength, good appearance, maintainability. The service life of bathtubs made of cast homogeneous acrylic can be 10 years.
How to distinguish a bathtub made of 100% cast homogeneous acrylic from an ABS/PMMA bathtub? Look at the cut edge of the bathtub. If the bathtub is made of homogeneous acrylic, there should be only two layers - acrylic and resin. ABS/PMMA bathtubs have three layers - a thin layer of acrylic, a large layer of ABS plastic and a third layer of reinforcement. So if the bathtub has a cut thickness of more than 8 mm, and the seller tells you that the acrylic here is 6-8 mm thick, then with most likely we can say that he is disingenuous. There is 1 mm of acrylic as such, followed by a layer of plastic - ABS.
TO quality characteristics Acrylic bathtub, which is worth paying attention to, also includes its rigidity and shape stability. These qualities are given to an acrylic bathtub by the reinforcement procedure that the bathtub undergoes during manufacture. The reinforcing layer consists of fiberglass and epoxy resin. And the reinforcement process, accordingly, is the application of such a layer to the bathtub. The more layers, the stronger the bathtub. The number of layers with which the bathtub was strengthened at the factory can be easily determined by carefully examining the edge of the side. The layers are clearly visible, like annual rings on wood. Therefore, the walls of the bathtub should not sag; this must be checked when choosing a bathtub.
Obviously, the better the quality, the higher the price. A compromise allows you to find bathtubs from Polish manufacturers that offer a very reasonable price-quality ratio.
Tip 4: Tuning your bath
For an acrylic bathtub, you can purchase additional equipment. This includes faucets, a hydromassage system, decorative panels, end/front curtains, headrests, handles, rugs, etc.
Of all the above, to necessary equipment, which will definitely need to be purchased along with the bathtub, is a faucet. And here is another advantage of an acrylic bathtub - the mixer can be placed on the side of the bathtub in any place where it is more convenient for you. You can even make several mixers. An acrylic bathtub allows you to realize all your ideas. 
Faucets, like all plumbing fixtures, vary in price and quality. When choosing, for example, Italian manufacturers, you can be sure that the money was not paid in vain. Take it cheaper made in China- it's up to you, but don't expect a long service life.
Tip 5: Buy a bath without leaving home
Now there are many places where you can buy an acrylic bathtub: plumbing stores and showrooms, construction markets, specialized shopping centers. But all this requires a lot of time, effort and nerves. Recently, it has become possible to purchase acrylic bathtubs online. It is much more convenient and profitable. You can choose the option that suits your price and design, which will be delivered to you directly to the specified address.
Thank you for purchasing a “BAS” brand bathtub. “BAS” hydromassage baths are modern technologies and original lines that provide the comfort of hydromassage, which will improve your health and give you many pleasant moments. This manual describes the bathtubs' functions, installation requirements, care and operating methods.
ATTENTION:
In order for the bath to be beneficial for you, to work for a long time and reliably, a number of conditions must be met:
If your body has problems with the functioning of the cardiovascular system, then consult a doctor (to what extent is hydromassage beneficial for you).
Consider installing filters (for water purification) - this will increase the service life of your faucets and hydromassage bath equipment.
Do not turn on the hydromassage without filling the bathtub with water.
TECHNICAL DESCRIPTION
Standard equipment for a hydromassage bath:
Acrylic bathtub – hydromassage – 1 pc.
Acrylic panel – 1 pc.
Drain and overflow device – 1 pc.
Legs – 3 - 5 pcs. (depending on model).
Panel clamp – 4 pcs.
Self-tapping screws for attaching acrylic panels – 1 or 4 pcs. (depending on model).
TRANSPORTATION OF BATHTUBS
When transporting and installing the bathtub, care must be taken not to damage the piping and electrical systems. DO NOT carry the bath by the pipes and nozzles.
INSTRUCTIONS FOR PREPARING A SITE FOR INSTALLING BATHTUBS: 
Plumber performing work on hot and cold pipes cold water, must take into account the linear dimensions of the bathroom. Otherwise, the pipe outlets may rest against the stiffeners, units and fittings of the bathtub. This means that the bathtub cannot be installed close to the walls.
The bathroom drain pipe should not rise above the floor by more than 10 cm. If this cannot be ensured, then a podium must be made.
The legs serve to level the bathtub, so additional supports must be installed under the supporting structure of the bathtub.
Electrical wiring must have multiple insulation access to exposed contacts, at least 3 mm thick. System protection must be based on differential (multiple) shutdown (1 fn =30 mA). The supply cable must comply with EEC standards or be type H07 RN-F, according to VDE 0250. Near the bathtub and in a place protected from water (recommended minimum height 25 cm from the floor), a socket should be installed (make sure the grounding cable is installed correctly). The baths are delivered ready to be connected to the electrical network. Do not under any circumstances swap installed terminals.
ELECTRICAL SYSTEM
The installation of the electrical system must be carried out by a professional electrician. must have a differential switch 3 0mA, magnetothermo 2.4 - 4A, and another common connection (CEI 64-8). If it does not exist, install one in the apartment’s common panel.
DO NOT INSTALL UNDER THE BATH.
The procedure for connecting hydromassage baths to the electrical network:
Yellow-green wire - grounding;
Brown wire - phase;
Blue wire - 0.
V
220 / 240 Hz
50 W
0.7 – 0,9
depending on the bath model
HYDROMASSAGE EQUIPMENT 
BATH CARE
For daily cleaning of the bathtub, use a liquid cleaner and a soft cloth. To maintain the shine of the bathtub, you can wipe it with a cloth with a polishing agent. Stubborn stains in the bathtub can be removed using conventional household cleaning products for smooth surfaces. To clean the bathtub, use only soft cloth napkins.
Deposits on the surface in the form of scale are removed with a soft cloth moistened lemon juice or wine vinegar.
Scratches or burn marks from cigarettes that appear on the surface are removed by easy help cleaning fine-grained sandpaper (No. 1000/2000) with water. You can restore the shine of the surface with a liquid polish.
CLEANING THE BATH HYDRAULIC SYSTEM
This type of cleaning is performed using hard water (more than 15 salt deposits per cubic meter water). It is recommended to clean the bathtub hydraulic system twice a year as follows:
Fill the bath hot water(40 C).
Pour in liquid detergent at the rate of 2 g per 1 liter of water and run the hydromassage unit for about 5 minutes.
After this, turn off the electric pump and drain the water from the bath.
Refill the bath cold water and turn on the hydromassage for 2 minutes.
Drain the water and wash the bathtub (see “Washing the bathtub”).
IMPORTANT NOTE
WARNING: Never use metal brushes or tools, or solvents or solvents to remove dirt from the surface of the spa. detergents with abrasive additives. Also avoid contact of ammonia or chlorine with brass and chrome parts baths.
HOW TO USE HYDROMASSAGE BATHS
Never turn on the hot tub until the water reaches 5-6 cm above the jet opening. Never use the bathroom after taking alcohol or taking medications. Hydromassage for medicinal purposes can only be performed on the advice of a doctor, who will select the appropriate duration of sessions and water temperature for you.
Taking a cold bath improves your health. A warm or slightly hot bath relieves tension. To relax muscles and relieve pain, take a bath (up to 40 C). The first hydromassage session, which should be carried out only in warm water, should last no more than 10 minutes. The effect of water jet massage is directly proportional to the temperature of the water and the duration of the session. After taking a bath for too long, you may feel tired. And if you feel drowsy while taking a bath, turn off the hydromassage device for a while and cool the water.
For overweight people, hydromassage baths at water temperatures exceeding 38 C are contraindicated.
Before turning on the whirlpool system, make sure that the jet nozzles are not pointing upward.
SIMPLE MALFUNCTIONS, THEIR POSSIBLE CAUSES AND REMEDIES
| Occurring fault | Possible reason | Remedy |
| No mains voltage | Call a specialist (electrician) | |
| Hydraulic pump does not turn on | The plastic tube connecting the button and the pump has come off the hydromassage button. | Attach the plastic tube to the base of the button and restart the system |
| Jet nozzles are closed | Rotate counterclockwise to open nozzles | |
| The hydraulic pump works, but no water flows from the jets | The piping system is clogged | See paragraph “Bathroom care” |
| Increased vibration in the hydraulic pump | The engine mount is loose metal frame baths | Tighten the engine mounting bolts |
Processed
Over the past few years, acrylic bathtubs have gained immense popularity among consumers, as their technical characteristics and appearance are much superior to those of their counterparts made from other materials. Their advantages include light weight, ability to retain heat, ease of care, reasonable cost and much more. But choosing acrylic bathtubs is still a difficult task for most buyers, since such products are presented in a huge assortment on the market.
The ratings of foreign and domestic manufacturers, as well as instructions for choosing quality products, will help you understand the features and parameters of bathtubs.
To choose the right acrylic plumbing fixtures, you need to know several important criteria that affect the quality and durability of the product.
Acrylic is polymer composition, which consists of several compounds (methacryls, polyesters). For the manufacture of plumbing fixtures, two types are used: ABS and PMMA. The first type is a two-component polymer, which is essentially an elastic plastic, and the second is close in its characteristics to organic glass.
The base of products is usually made from ABS, which is covered with a layer of PMMA on top. The result is a bathtub with a fairly thin layer of acrylic that can withstand about 5 years of use. In addition, ABS has high porosity and the ability to absorb water, which is why bathtubs deteriorate quite quickly.
PMMA is a more durable material with good technical characteristics. It is durable and aesthetically pleasing, but products made from 100% PMMA are more expensive than others.
You can determine which type of material was used in the manufacture of the bathtub by its appearance.
Attention: a burst bath bowl made of low-quality acrylic can lead to serious consequences in the form of a flood for neighbors, so special attention should be paid to assessing the quality of the material.
Acrylic itself is not strong enough, so a reinforcing layer is applied to products that will be subject to mechanical stress. For this purpose they are used epoxy resins, fiberglass and polyurethane foam, which are used to cover bathtubs with layers of outside(the more layers were applied to the surface, the greater the load the structure can withstand).
Reinforcing plumbing fixtures with polyurethane resins with the addition of fiberglass is cheaper, but a violation of the technology can lead to the bathtub emitting a strong chemical odor. Bathtubs reinforced with polyurethane foam are more expensive, but they are absolutely environmentally friendly and safe for humans.
Important: some manufacturers apply the reinforcing compound exclusively to the ends of the product - where the buyer can see them, while neglecting the treatment of the rest of the surface.
The thickness of the walls of the bathtub is another characteristic on which the reliability and durability of the product depends. Good plumbing fixtures have wall thicknesses ranging from 2 to 6.5 mm with a coating of at least 0.5-0.6 cm. To save money, you can purchase a product with thinner walls, but do not forget that their service life may be significantly reduced.
When you press on the walls and bottom of the bowl, they should not spring or bend. Most sellers claim that a too thin layer of material is compensated by the reliability of the frame, but the durability and wear resistance similar products raises serious doubts.
The dimensions and shape of the products do not affect the quality, but the ease of use of the plumbing fixtures depends on these criteria. From an ergonomic point of view, the main parameters of the bath should look like this.
As for the shape, acrylic bathtubs can be classic, rectangular, corner, oval, etc. It is worth noting that when purchasing non-standard products, you should pay special attention to quality, since the risk of deformation and mechanical damage in in this case rises.
On modern market acrylic bathtubs are presented in a wide range to suit every taste and budget, but it is better to give preference to manufacturers who have already gained a good reputation among consumers.
If speak about foreign manufacturers plumbing, the most popular are companies from the Czech Republic, Poland, Spain and Italy. They meet European quality standards, so they are durable and reliable, but are more expensive than their domestic counterparts.
The products of the Czech company Ravak are considered the most popular in Europe. Bathtubs are made from high quality material using modern equipment and technology. The products have a thick layer of acrylic, are reinforced with fiberglass and coated with polyurethane, which significantly increases their reliability and durability. The company's product range includes bathtubs different sizes and shapes, and some models are equipped additional functions: hydromassage, lighting, etc.
The disadvantages of Ravak plumbing fixtures include their rather heavy weight (about 20% heavier than products from other manufacturers), as well as the difficulty in selecting components and fasteners.
acrylic bathtubs rawak
Another brand from the Czech Republic, which was the first in Europe to begin producing acrylic sanitary ware. Today, many companies rely on Vagnerplast products, as they meet all quality standards. The products have an ergonomic shape, special supports for the legs and head and adjustable legs. The company produces both classic bathtubs and exclusive models equipped with a massage system and other options.
Vagnerplast Cavallo 190×90
acrylic bathtubs vagnerplast
Roca bathtubs are made in Spain and are among the top three in quality and durability. Products are made by injection molding using the extrusion method from high-quality acrylic. The thickness of their walls is 4-5 mm, which is slightly less than that of other European analogues, but thanks to high-quality reinforcement and a rigid frame, they are practically not subject to wear and chips. Buyers claim that immediately after installation, some models creak a little, but after a while the sound disappears.
acrylic bathtubs roca
Cersanit baths are one of the best in terms of price and quality ratio. They are made in Poland from acrylic sheets 4 mm thick. The products have good technical and decorative characteristics (double reinforced bottom, rigid frame, smooth surface), and the company’s range is constantly updated, so any buyer can easily choose a bathtub to suit his taste. The disadvantages of Cersanit products include the fact that thinner antibacterial acrylic is used for their manufacture, so the installation of a hydromassage system is excluded in this case.
Acrylic corner bathtub CERSANIT VENUS 140×140
The Polish concern Kolo is another leader in the production of acrylic bathtubs in Europe. For the manufacture of sanitary ware, English acrylic sheets with a thickness of 3-5 mm are used, which are highly reliable and durable. The technology of forming products involves adding a special pigment to the material, thanks to which the baths can be polished and cleaned without fear of damage or scratches. The Kolo product range includes classic rectangular, angular and asymmetrical models. As with Cersanit products, Kolo bathtubs are made of thin acrylic, so they cannot be installed with hydromassage systems.
Acrylic bathtub Kolo Relax 150×150cm
Riho is a Dutch company that offers a wide range of products, including corner, round and even hexagonal bathtubs. The thickness of the acrylic sheets used to produce bathtubs is 6-8 mm, due to which the brand’s sanitary ware is durable and wear-resistant. When manufacturing products, special attention is paid to their environmental friendliness and safety, which is why they have an antibacterial coating and a non-slip bottom. The most significant drawback of Riho bathtubs is their high cost, especially when it comes to products of non-standard shape.
NEO 150×150 semicircular corner acrylic bathtub (RIHO)
The cost of plumbing fixtures from domestic manufacturers is significantly lower than the price of their European counterparts, but this does not affect their quality at all. Modern products from Russian companies are made from high-quality acrylic using innovative technologies and equipment, thanks to which they can become a good alternative to more expensive bathtubs.
Acrylic bathtub Aquanet Fregate 120×120
The Aquanet company is a leading manufacturer of sanitary ware, which manufactures products according to recognized standards using equipment from Italy. Among domestic companies, the products of this brand are considered the most expensive, since they have quality certificates and provide a guarantee for all models. Aquanet bathtubs are made from acrylic sheets 5 mm thick, but thanks to a special reinforcement technology, the products are wear-resistant and reliable. The brand's disadvantages include the use of a composite during the production process, which is why the bathtub can emit a strong chemical odor during the first time after installation.
Acrylic bathtub Aquanet Graciosa 150×90
To produce sanitary ware, the Bas brand also uses European equipment and materials, and during the process the material is treated with infrared rays, which allows it to be given any shape. Reinforcement is made using both glass fiber with the addition of polymers and safer and more environmentally friendly polyurethane. Bas has a large number of models in its assortment different designs, including baths equipped with air and hydromassage systems. The manufacturer provides a ten-year warranty for all products.
Acrylic corner bathtub Bas Laguna 170×110 (right)
Aquatek bathtubs are made from five-millimeter sheets of acrylic without any impurities and are reinforced with fiberglass and polyester resin. In addition, they have a durable aluminum frame, which increases the reliability and durability of the products. The advantages of the brand’s products also include an attractive appearance and a pleasant-to-touch surface, which makes hygiene procedures as comfortable as possible. The surface of the bathtubs is easy to clean and is not subject to mechanical damage during operation. The weight of the products ranges from 15 to 25 kg, which greatly facilitates the transportation and installation of plumbing fixtures.
Radomir is one of the first companies to begin producing acrylic bathtubs in Russia. The company's product range includes bathtubs of various shapes and sizes, including products designed for people with disabilities. In the production of sanitary ware, the main attention is paid to its safety and environmental friendliness, which is why Radomir products can be found in hospitals and sanatoriums. The baths have a special coating that prevents the growth of bacteria, as well as the formation of fungus and mold on the surface of the material. Additionally, brand products can be equipped with hydromassage, lighting, touch screen and other options.
Acrylic bathtub "Estelona" with panel
Hot tub "Sorrento"
The 1Marka company has been operating in the domestic market for 15 years, the main production line is located in Kazan. The manufacturer specializes not only in acrylic bathtubs, but also in other plumbing fixtures. A special feature of the company is the presence of its own design bureau, which allows it to constantly improve products and create new models. 1Marka products are aimed exclusively at domestic consumers, so the company’s assortment includes many small-sized products that are well suited for small bathrooms. If desired, any consumer can order plumbing fixtures according to their own original sketches.
Bathtubs of the domestic brand Triton are made from Dutch and Austrian materials using advanced technologies and are reinforced with high-strength fiberglass. Inserts are used to give products additional strength. special form, and the top of the plumbing is coated with a compound that protects it from bacteria and mechanical damage during operation. Triton's product range includes rectangular and corner baths, models with hydromassage, lighting and lamps for chromotherapy.
Bathtubs under the BellRado brand are manufactured in the Chelyabinsk region and have already gained popularity not only in Russia, but also in neighboring countries. The company's plumbing belongs to the economy class, but the quality is not inferior to well-known European products. It is developed taking into account consumer requirements and the characteristics of the domestic market. The company offers about 30 different bathtub models, including rectangular and asymmetrical products, as well as bathtubs equipped with a hydromassage system.
BAS Nicole
When purchasing an acrylic bathtub, you should pay attention not only to the operational and decorative characteristics of the product, but also to the accompanying documents, which contain information about the manufacturer and product. In this case, the consumer will receive truly high-quality plumbing fixtures that will faithfully serve for many years.
Step 1. We print out the purchased bathtub and the factory frame and lay it out on a clean floor, having previously laid it soft cloth or cardboard. In the set of fasteners you will find short and long metal profiles, self-tapping screws, legs and pads for them (thrust bearings), dowels, studs, washers, nuts, stands. Depending on the configuration, the number of parts may be different, for example, the reinforced frame contains more metal profiles, or the bathtub is supplied immediately with an all-welded frame.
Typically, holes are already drilled in the reinforcement and dowels are inserted. This eliminates the need to mark and drill holes yourself.
Most acrylic bathtubs are installed not only on the frame, but are also fixed along the line adjacent to the walls with metal hooks and hangers.
If the kit does not include drain fittings, it must be purchased, taking into account the height of the legs and comparing it with the dimensions of the siphon.
For work you will definitely need screwdrivers, wrenches and pliers. Also don’t forget about silicone-based sealant, a bubble level, a tape measure and a pencil.
Step 2. We start by assembling the frame and legs. Turn the bathtub over without removing the protective film from inner surface. We provide easy access to any side of the bowl.
Using long self-tapping screws, we connect the profiles. We rely on the instructions attached to the acrylic bathtub and the correspondence of the holes in the longitudinal reinforcement with the dowels installed in the transverse strips.
We place the assembled frame exactly in the center of the bottom of the bathtub.
Step 3. Let's move on to installing the legs. We will install three pieces on the front edge of the bathtub, two under the bottom of the bowl and two more at the edge that will be adjacent to the wall.
We begin to fasten the racks to the profile and side of the bathtub. We install the stand on the side, screw the first long pin into it, and a nut onto the pin. We insert the resulting pin with a stand into the hole of the longitudinal metal profile. Secure the stud with a nut and locknut. We screw a plastic support on top.
We assemble the remaining support legs in the same way. We adjust the height of the legs depending on the dimensions of the decorative screen. The approximate height from the floor to the edge of the side should be 60 cm.
Short studs are intended for the legs located under the bottom of the bathtub. We insert them into the holes of the transverse profiles, secure them with nuts and screw on the plastic supports.
Step 4. Check the assembled frame with a bubble level.
If necessary wrench Tighten the studs to level the position.
We take short self-tapping screws and fasten the racks to the sides of the bathtub.
Step 5. Turn the bath over. We take a level and once again double-check the horizontality of the sides. There is no need to make slopes for better water flow.
Step 6. Now you can connect the siphon with overflow, based on the manufacturer's instructions. General principle connection of inspection siphons (piping) of the knee type is as follows:
Note! Before the final installation of the bath and screen, you can insulate the bottom of the bowl polyurethane foam, applying it in a thin stream to the sides, bottom and partially capturing the fasteners for the purpose of their additional fixation.
Step 7. When the siphon is assembled and the bathtub is level, all that remains is to make markings on the walls, drill holes and fix brackets or hooks on the wall that will hold the bathtub. We put the edge of the bathtub on these hooks, and insert the free end of the thick siphon corrugation into the sewer hole. After joining, we apply a strip to the junction of the bathtub and the wall silicone sealant and attach the baseboard or protective strip.
Note! To check the quality of the siphon installation and the correct installation of the structure, you should dial full bath cold water and wait a few hours. If no leaks or distortions are found, you can drain the water and install decorative screen and use the bathroom. Otherwise, you will have to disassemble and reassemble all products in order to eliminate defects.
Step 8. Install the decorative screen. Clip fastenings are included. First, the upper fasteners are screwed, after which the opposite ones are screwed down. The decorative panel simply “snaps” onto them.
Attach the squeeze plates to the inserts, setting a distance of 2 mm between the side of the bath and the edge of the squeeze plate 
You can also make a frame for decorative panel from wooden blocks or metal profiles.
No factory frame? No problem! We can install an acrylic bathtub on bricks. This option is even more reliable compared to the method of installing a bathtub on a factory-made frame.
The support can be solid or columnar.
First step. We temporarily install the bathtub in the place of its future installation and project a drain hole onto the base. This will give us the opportunity to leave a gap in the substrate for connection.
Second step. We lay out the bricks over the entire supporting part of the container. We select the height so that the sides of the bath rise above the floor by no more than 600 mm. At the same time, we take into account that we will still have a 2-3 cm pillow made of polyurethane foam.
The bricks are laid on traditional cement mortar.
Third step. Collecting around the perimeter brickwork frame made of sheet plywood. The height of such sheets should exceed the masonry by the thickness of the foam substrate. Don't forget to leave the drain hole unfilled.
Fourth step. We evenly foam the surface of the substrate with polyurethane foam, without going beyond the boundaries of the frame. We immediately apply pre-prepared sheet plywood onto the foam. We use moisture resistant sheets 10 mm thick.
Fifth step. We tightly plug the drain of the acrylic bathtub. At the same stage, we prepare about a liter of water and wooden supports to regulate the level of installation of the container.
Sixth step. We pour the previously prepared water into the container and place the bath on the substrate according to the building level.
Seventh step. While the polyurethane foam has not hardened, we adjust the evenness of the installation of the bathtub using supports. As a result, the water in the container should be evenly distributed around the drain, and the level should show “0”.
Eighth step. Having aligned the bathtub, pour water into it to about half the volume. Under the weight of water, the foam will not be able to lift the container, and the bath itself will take on the required slope.
Ninth step. Let the foam dry and remove the bath. If the edges of the container must be recessed into the wall, first outline the outline of the edge on the surface, and then make a recess in the wall for the edge of the bath. A hammer drill will help us with this. If a groove is not provided (this is not recommended if the walls are made of blocks, plasterboard or other lightweight material), at the level of the lower cut we simply fix a timber impregnated with , or a steel corner. We will additionally strengthen the supporting bar at the end with stops.
Tenth step. We return our container to its place and connect it to the sewer. We fill the gaps between the container and the bricks with foam. We install a decorative screen and baseboards.
Example of a bathtub installed on bricks with mosaic finishing 
First step. We bring the container into the bathroom.
Second step. We mark the base at the installation site brick supports. The most correct option is to erect the pillars closer to the edges of the bend of the acrylic bathtub. If the container is long, an additional support can be erected in the middle.
Third step. Having outlined the places for laying the supports, we begin to prepare cement mortar. We don’t prepare too much - we have to lay out no more than 20 bricks, so we don’t need any extra expenses.
Fourth step. Let's start laying. We place the support for the back of the bathtub at a height of 190 mm, and the pillar for the front edge of the tank is erected at 170 mm. The height of the middle support, if needed, is selected according to the situation, depending on the design of the bathtub being installed. The difference in height of the pillars will provide conditions for efficient drainage of water from the tank.
Important note! Many modern acrylic bathtubs initially have a sloping bottom to ensure water drainage. If you have such a bathtub, set all the supports level, focusing on the top part.
Fifth step. We give the masonry about a day to dry and install the bath. We place the container slowly, moving it tightly towards the walls. We fill the gaps between the bricks and the bathtub with sealant.
If desired, you can additionally fix the bath to the wall using dowels and a metal profile. This type of fastening is used quite rarely, but still occurs.
After making sure that the bathtub is installed correctly, firmly and evenly, we connect the sewerage system, install it, mount a decorative screen and lay the baseboard on the bathtub.
Our old jacuzzi began to smell completely, the hydromassage itself had long been turned off, one of the nozzles burst, basically in the trash, so I bought this jacuzzi again...
The question arose which bathtub to buy. We will talk about choosing an acrylic bathtub without hydromassage with a size of 140cm-155cm, a corner design, symmetrical, as they also call “part or a quarter of a circle.” Hydromassage was no longer needed due to previous operating experience, I won’t go on and on about it, in general – no to hydromassage!
Next, we began studying the market for acrylic bathtubs. Of course, I didn’t really understand what the difference was between an acrylic bathtub for 10tr and 50tr, acrylic and acrylic. Therefore, I began to study the very bottom of the market, such brands as Triton (Triton), BAS (BAS), Aquatek, Appollo, 1Marka, maybe some other non-reimbursments or individual models more expensive brands. I came across an Apollo bathtub on sale with glass headrests and a faucet for 13 rubles in total, but our faucet sticks out of the wall and no one is interested in redoing it, in general it’s no longer needed.
Online shopping is a separate matter. It seems that people don’t need money... On my first visit, I didn’t manage to buy any bathtub, or even talk about anything in particular. The answer was a call back and silence. Summer season, I spat and went to the dacha. There he occasionally returned to this issue.
After much research, again, what size is the bathtub, 140cm or 155cm, do you need a seat in the bathtub, so that everything is included (frame, front panel, etc.) or separately. In general, we came up with a model from the manufacturer BAS XATIVA (Xativa), 143x143cm. And the size is just right, there is a seat, and a huge bottom area. We have two small children, so it’s perfect for them to splash around there. And the price was 12800 rubles. full set with delivery and lift to the floor. I finally got through to the BAS company store and, lo and behold, everything was in stock and I could place an order. The order took a week to complete, but was completed within a clearly stated time frame.
Installation of bathtub BAS XATIVA (Xativa). Installers friendly to the online store were called, they tore out the old one, threw it away, and installed a new one. BUT! The bathtub was installed, and a thin layer of sealant was applied to the walls. I thought about laying tiles there, but during trial use, the bathtub began to sag inward with detachment from the wall. Those. It’s good that I didn’t lay the tiles, everything would have fallen off. Those. the bathtub does not have sufficient rigidity on its own frame; there was clearly not enough support point in the center of the bottom. This is where I probably realized the difference between a bath for 10 tr and 30 tr. I called the same installers, after a short argument, it was decided to fill the perimeter with sealant and install additional support from improvised means. In general, now there are no visible problems with deformation, everything is rigid. The extra support helped.
In principle, we are happy with the bathroom, as naturally with any new bathroom, with some reservations regarding the design, which is clearly not finalized. Next time I will look more closely at the design and thickness of the acrylic!
First of all, of course, a few words should be said about the company that produces acrylic bathtubs BAS. This company continues to surprise its consumers and partners, proving that bathtubs produced in Russia are no worse than their foreign counterparts.
The main products of this company are hydro and air massage acrylic bathtubs. Among the obvious positive aspects of acrylic bathtubs produced by BAS are the following:
I wonder what the buyers themselves say about acrylic bathtubs; reviews are quite easy to find on the Internet. It turns out that the majority of customers were very satisfied, saying that the acrylic bathtub from bas works great. Buyers happily share their impressions that the bathtub of this company:
Another interesting point was that many buyers installed and assembled both an acrylic bathtub and a bathroom curtain on their own. Of course, not everyone can do this, but we can still assume that this indicates the quality of the product, since even an unprofessional assembler will do everything efficiently. However, the installation of a bas acrylic bathtub can be done by professionals - it all depends on the client’s capabilities. The instructions that come with the bathtub are quite clear and simple, so assembling the bas acrylic bathtub is not difficult.
One great example is the acrylic bathtub bas atlanta, which has certain advantages. So, the dimensions of this bathtub model are quite modest, it is suitable even for a small bathroom - 170 by 70 cm. However, the capacity is very good - 205 liters. Since bathtubs from BAS are mainly hydromassage, Atlanta is no exception - it is equipped with six nozzles - three on each side.
The required kit includes a standard set:
In terms of design and space optimization, this is a very simple, medium-sized rectangular bathtub that is quite comfortable, but does not take up too much space or distract too much attention, so it will easily fit into almost any modern design.
Another example of an excellent bathtub is an acrylic bathtub - this is a corner asymmetrical bathtub. It is quite compact in itself - length 160 cm and width 88 cm, and at the same time it also has a beveled corner, so it will become ideal option for a small room. Although her style is quite simple and elegant, if desired, you can highlight her - for example, create a visually separate space for her, using decorative elements, finishing with tiles of a different color or shade, additional shelves, etc. In addition to its ergonomic design, this bathtub also has an interesting shelf for hygiene items, or even to sit on.
The equipment here is standard - the same as in Atlanta. The capacity is also 205 liters. But there are more hydromassage jets - there are eight of them.
The last one to consider, of course, is a model such as an acrylic bathtub bas lagoon, which is somewhat similar to the Florida model. However, Laguna is larger in size - 170 by 110 cm. The capacity is also much larger - 295 liters. And the number of hydromassage nozzles is the same - eight pieces. The equipment is standard.
This bathtub is suitable for a medium-sized room, due to the fact that although it is asymmetrical, it is still quite large and is unlikely to fit well in a small room. This model is also very conveniently equipped with a shelf for bathroom accessories and has an ergonomic design. At the same time, it will most likely be one of the main elements in the design of the room, this is facilitated by its rather large size. Therefore, you can highlight it with directional colored lighting or other decorative options. It would also be a great idea to hang large mirror next to the bathroom, so that it expands the space, and the bath no longer seems something bulky.
In addition to the standard equipment, BAS offers its customers quite big choice additional options. These additional features can be divided into several groups:
The BAS company provides its customers with really wide possibilities in choosing a model and a complete set of bathtubs, plus you can choose a design curtain.
