We will send the material to you by e-mail
Everyone at least once in their life lost the keys to the entrance or did not know how to enter the house if a friend was suddenly delayed and it was pouring rain outside. The Metakom intercom can be opened without a magnetic key, but this article is not for those who are going to break into the door, but for people who find themselves in a difficult situation and act only to enter their own apartment.
PHOTO: bryansku.ru It is not necessary to use a magnetic key; you can open the door in several ways
There are two types of locking devices - with and without a display. In the first case, you can only open the door with a key, and in the second, you can use several hints.
The Metakom brand intercom can withstand strong temperature fluctuations and remains in working order even in frosty conditions of -45ºС or heat up to +75 ºС. For each entrance and individual subscriber, a personal code is created.
Related article:
How to open an intercom without a key: Vizit, Forward, Cyfral, Eltis, Keyman, Factorial, Blink, Domoguard, T-Guard, Rainmann, Metakom; the principle of operation of the intercom and the main methods of opening it - read the publication.
Main features of intercoms of this brand:
It is almost impossible to hack such a device. If you want to get into your apartment, but have lost the key, call your neighbors, or use a few tricks.
The device that is given to apartment owners at the entrance - a magnetic key - is very well protected. It continues to operate correctly even at very high or low temperatures and under different mechanical influences. Data exchange between the main device and the unlocking device is based on the principle of data transfer to the receiver from a magnetic jumper. Today there are a huge number of digital combinations and it is impossible to find one that matches a specific door.
All identification devices are completely individual and work only with the Metakom system, and the keys are made different types, including contactless. The key can be in the form of a “tablet” or a plastic card.
For each version of the device, certain codes are selected, they are always different. Depending on the type of intercom, you can choose several different ways to open the door without a key. First of all, you need to pay attention to the presence or absence of a display on the panel.
The easiest option is to enter the individual apartment code. It is stated in the contract issued upon registration, however, apartment owners very often forget it, or do not even know about its existence. If this method does not work because the owner of the apartment has forgotten the code, you can choose other options.
You should try entering the standard code – 1234 and press the “call” button. However, it can be changed by installers during installation.
Another option is to indicate the very first apartment number from the entire entrance; it can be 1, 215 or any other number. A message should appear confirming that the code works. After this, enter the numbers 5702 and you need to wait a few seconds. This is usually enough to unlock the lock, but if it still won't open, you can try a few more complex combinations.
Another combination is 65535/B, after which the code 1234/B and the number 8 are immediately entered. If this does not help, then you can check the most last option– 1234/B and B/6/B/4568.
If this code does not work, all that remains is to wait for the neighbors to open the door.
If the intercom does not have a screen, you can use several methods:
There are no other options. You can try to reprogram the device and enter a new key, but these are already radical measures that should be resorted to only if you need to get home very urgently, and your relatives will not return soon.
Reprogramming an intercom is a difficult thing that can incur unpleasant consequences not only for the owner of one apartment, but also for the entire entrance, so this method is not recommended.
If reprogramming the intercom is extremely important, you should seek help from specialists. The support number is usually indicated on the intercom itself and you can quickly contact the technician using it.
If, when installing the intercom, the single code 1234 was changed by the craftsmen, then you will not be able to enter the entrance; it is best to wait until one of the neighbors comes out. If the settings have not been changed, you can use some functions:
The use of other codes is strictly not recommended, because they contribute to the reprogramming of the device. A situation may arise when even experienced master subsequently will not be able to figure out what code was entered and none of the residents will be able to get home, there will be only one option left - to change the intercom, and this is not a cheap pleasure.
In this case, the same signal is transmitted to the new key.
If you need to get into the apartment as quickly as possible and there are no other options left, you can try to add a new key to the already prepared list using the command 65535/В/1234/В and your apartment number. Then a tablet key is applied, after which you need to dial B/7 and delete the programmed code B/7/0/11. Then, to enter the entrance, the key that was originally issued but stopped working is used.
All these methods will only work if the settings were not changed during installation. If the master still installed the security, you need to take out an agreement with the company that installed the intercom and come to the office, where a new key will be issued.
02/24/2016 11/19/2019 by Why
Everyone knows that utility workers open the intercoms of a huge number of houses without carrying around a huge bag with keys to all these devices. They use the entrance to the programming mode, in which opening the door is far from the most complex function.
Manufacturers do not pay enough attention to complicating access to the program mode, as a result to an ordinary person who does not have special professional skills in programming electronic devices, it becomes possible to provide keyless access to the entrances of residential buildings equipped with intercoms.
This article is intended for use of information in an emergency situation, when it is impossible to open the door with a key (accident, accident, etc.).
Opening the intercom Visit
Intercom systems trademark Vizit are most often installed at entrances apartment buildings. The question of how to open an intercom without a key is relevant for people who cannot get into own home. For keyless access to the entrance, you must enter a special code on the call panel that will allow you to gain access. When entering the code, you should take into account the version of the installed model.
Provided that the installers did not make any changes to the initial settings, we go through the following codes:
*#3423;
12#345;
67#890;
*#4230.
If the intercom does not respond to these codes, you need to go to the service menu. To do this, dial the combination #999 on the call panel and, after 2 short signals, the code. Again, there are many options for this code: 1234 (standard), 0000, 9999, 3535, 12345, 6767. If the code is entered correctly, the device will respond to it with 1 beep, and in case of an error it will give 2 beeps.
Once in the service menu, you can perform the following operations:
Open the door. To do this, enter: 2 – (pause) – # – (pause) – 3535.
Add your own key: enter 3 – attach the key to the reading location – # – wait for the sound signal.
Completely delete all keys from the internal memory: press 4.
To confirm the changes made, you need to press #, and to exit the service menu - *.
Opening the METAKOM intercom
Three ways to open METAKOM intercoms:
Opening of the intercom METAKOM MK – 20 M/T
The intercom from the same company opens somewhat differently - METAKOM MK - 20 M/T
There are 2 ways to disable it:
Opening the Cyfral intercom
Two opening options:
1) If there is a mark “M” on the intercom.
Press: 07054, or – call – 41, or – call – 1410.
2) If there are three-digit apartment numbers.
Call – apartment number (100, 200) – call – 2323; 7272; 7273 (one of 3 numbers).
Opening the Eltis intercom (ELTIS)
There are only 2 similar ways to open intercoms from this company:
Press the call button - enter 2323.
Press the call button - enter 7273.
There are no other methods; if you fail, it means either you are doing something wrong, or Eltis has modified its devices and protection circuits.
Opening the Keyman intercom
The most problematic in access.
1) K – 100 – 789 – short sound – 123456 – 8;
2) K – 170862 – short sound – 0.
Opening Barrier II, 2M and 4
These are very old intercom models. And that is why they are often still found in old nine-story buildings and five-story Stalin buildings. You won't find anything like this in new buildings 100%.
In the “Barrier 2” and “Barrier 2M” models, to enter the entrance you need to press the buttons “1” and “3” or “1” and “0”. Sometimes you can open the door simply by moving a magnet in the area where the keys are placed. For the Barrier 4 model there are no universal keys or codes at all.
Rainmann and Raikmann intercom codes
Despite some similarity in names, Rainmann and Raikmann intercoms are completely different devices. Raikmann devices are resistant to hacking and cannot be opened without a key using a code. But the Rainmann CD-2000 and AO-3000 models are found.
In order to open the 2000th model, you need to click on the “key”, then enter the code “987654”. After this, the intercom will beep and you need to enter the numbers “123456”. If the engineering menu is available, the “P” icon will appear on the screen. Now, to unlock and open the door, you need to press the number 8.
It’s better not to reap anything else - you can cut everything off and get the hell out of the residents.
Another life hack that has been noticed by users is the reaction of the touch keyboard to hypothermia. If you roll a snowball, apply it and hold it for 15-20 minutes, then there is a chance to open the door.
Opening the Factorial intercom
Setting up intercoms of this brand is very, very similar to the already familiar Digital, with the only exception that when installing the device, it is necessary to change the master password and therefore it is believed that it will not be possible to open it. Although there may be a hacking option through the engineering menu. To do this, you need to dial the Factorial intercom code. In most cases the following are used:
000000
123456
Another option is to press the “5” button and hold it for 5-6 seconds, then type this:
180180 + “Call” + 4 + “Call” key.
Opening of the Laskomex intercom (Laskomex)
To open the door on Laskomex AO-3000 VTM, try entering the keys:
1 + "Key" + 8976
66 + "Key" + 1989
Didn't come? This means the code was changed during installation.
To enter the service menu, you need to click on the key 5 times, after which a password entry field will appear. The default is: 1234. Most often, it is changed during installation, but there is still a chance. Code P8 is responsible for opening the door “Laskomex AO-3000VTM”.
Opening the DomoGuard intercom
A rare guest in our high-rise buildings. It is extremely rare.
To open the Domogard intercom door, make one long press on “C”. After it makes a sound, quickly enter the code:
669900 + “Call” + number of the last apartment in the entrance plus 1
After this, the following message will appear on the screen: “F-”. We're inside the service menu! Then you can use one of the following options:
080 - Open the door
333 - Remember new key
071 - Disable door lock
Opening the Blink intercom
These are not entrance intercoms, but individual ones, most often used in private homes or where there is a concierge. There are no universal codes for it.
Opening the T-Guard intercom
Another rare model. There is only one hacking option:
“Call” + 00000 + “Call” + “Call”
The last two calls must be pressed quickly and the entrance intercom will open.
Opening the Forward intercom
There is very little useful information on Forward intercoms on the Internet. There are only three known universal keys that were excavated:
123*2427101
K+1234
2427101
In order to program your door key for “Forward”, you can try entering “77395201”+”*”+0+”*”. After that, apply the key tablet and press “#” twice. If the code “77395201” did not work, try this one: “5755660″.
Opening the intercom KS-intercom
There is very little information about how to open a KS intercom. The only code I could find:
“K” + “377” + pause + “698” + “K”
There is also information that sometimes the code works:
"K"+0000
"K"+9999
Or:
"K"+ 0000 + pause + 98
"K" + 0903 + pause + 98 + pause + "K"
Unfortunately, they don't always work either.
Opening the Tehkom intercom
There is information on the Internet that it will not be possible to open the Techcom door so easily. In some cases, the following may work. You will definitely need a key for such an intercom. Press and hold three buttons “1”, “6” and “0”. After that, we release them one by one. We start with “0”, then “6” and “1”. A signal will sound. Here we enter the default pass - “4321”. If the password is correct, click on “Call”, then on “3” and again “Call”. We bring the key and the door will open. I haven’t tested this method myself, but I can’t vouch for it.
Opening the Impulse-DS intercom
There is very little information on Impul-DS intercom models. Possible options:
"1234"+"C"
“B”+”99911″+”B”
The first option almost never works, because... The code will definitely be changed when installing the device.
Opening the Berkut intercom
The entrance intercom Berkut LS 2001 is the only model of this manufacturer on the market so far. It is a simple device based on oscillatory circuit, which is assembled on a resistor and capacitor. Universal codes
“key” + 123456 + “key” + 5150С
"key" + 123456 + "key" + 206С
“key” + 123456 + “key” + 6140С
"key" + 123456 + "key" + 2589C Opening of the Pierres intercom (Pierce)
In the entrances there are models “Pirrs 1000 Micro”, “Modern” and “Lux”. Factory master code for all three types:
"12345678"
"K"+"1234"
Also for the Pier 1000 Micro model the key may work:
“8310649” + “entrance number”
There is evidence that these models of audio intercoms allow you to enter your own code. This is done like this:
Enter the master code “12345678”. If it has not been changed, a beep will sound. Press the door open button, and without releasing it, press the number “5” on the keypad. The confirmation signal for entering the settings should sound again. Release the door open button. Now you need to enter your code - 987, for example. The main thing is that there should be no more than 8 digits. Moreover, the sequence of the first two digits should not coincide with the master code or the apartment number in the entrance. After finishing entering the code, click first on the “star” and twice on the “hash”. After this, the intercom can be opened with the code: “987” + “*”.
Attention! If you tried to use the code specified in the article for your intercom and it did not work, there is no need to write angry comments. I make no guarantees. What works in one entrance is not a guarantee that it will work in another. Moreover, in Lately installers became smarter and, having had enough of problems from young hackers, began to change passwords and master codes.
Metakom intercom is one of the most commonly used intercoms in apartment buildings. The name of the device is well known to many people, since such access control units provide broad protection against unauthorized access. They are very strong and difficult to crack. You can open the Metakom intercom door not only with a programmed subscriber key, but also with the help of a specific code that is assigned to a specific apartment.
As you know, all intercom models have their own universal code, which is programmed during the production of the device. It is determined by the intercom model and its firmware. If for some reason you suddenly lost your intercom key, then in some cases you can use this code to open the door.
The Metacom company produces two main categories of devices, without going into details. One of them is equipped with a screen or display, and its hacking differs in its alternativeness and is precisely determined by the firmware. The second type is without a screen. Models of this category require entering information “by touch”, relying only on audio signals. Almost all Metacom devices are designed for harsh conditions of use. They can operate at temperatures ranging from – 40 to + 75ºС. The models work during glaciation and require the installation of absolutely any electromagnetic lock with varying degrees of amplification. The number of available subscribers can range from one to nine hundred and ninety-nine, and anyone can receive personalized codes from the entrance with the Metacom system. Companies that install intercom systems must include it in a special work contract.
The manufacturer's intended method for unlocking the door is to use a password code that is set for a specific subscriber. Below we will look at various commands for opening a Metacom intercom without using key access.
Important! Do not forget that such methods, which we will consider, will in no case work if the installers installing your intercom changed the factory standard Metacom code.
The method for opening this intercom has the largest number of variations and sets of numbers, if we talk about the model that is equipped with a screen. Such locking units should be classified as the most current category; they come in a variety of versions and firmware. In order to hack a Metacom intercom, you need to perform certain clear actions:
Then several numbers 5702 are dialed and after a few seconds, namely two, the Metakom intercom opens without a real contact key.
On video: Opening an intercom with a Metakom MK-2003 screen using a code.
For the remaining firmware the following combinations are allowed:
Here one, two, three, four is the factory metacom firmware code used in large quantities models. If a specific intercom was programmed and installed by a specialist, the sets will never work. For MK-20 M/T types there are side, individual unlock kits. In order for such an up-to-date intercom to be opened using Metacom without a key, you can try the following combinations:
The final set is needed not only to unlock the electromagnetic lock, but also to enter a new contact key into the registration database. If suddenly it exists in stock (the multifunctional standard key for the Metakom intercom is also suitable) - after you have inserted the tablet, you need to press it to the desired area on the unit. The two sets of steps that are given apply to a large number of intercoms without a screen.
On video: How to record a key on the Metakom MK2003.1 intercom
On video: Programming the key on the MK-20.2 intercom
Almost all access to settings is done using one single code or password, it is also called the master code. This well-known standard set is one, two, three, four. You should try to enter this command, but if the installation was done by a professional specialist, this password will definitely be changed. You need to find out another master code from the company that equipped the door with a locking unit and issued apartment keys for the intercom installed by Metacom. But sometimes it happens that the encoding simply did not change. The intercom has three levels of settings. These are user, system and of course service. In the first and second, the change of the only current and multifunctional metacom code is carried out, the connection of apartments and various other special processes are carried out. The most interesting is by far the final one of all three listed services. With its help, it is possible to change virtually everything that is assigned to a specific subscriber.
Using the system maintenance list, you can feel like a professional specialist programming the unit and change the master code or intercom password. For this process it will be necessary to know its previous value. In order to set a new code, you need to dial 65535-В-1234-В-9-3 on the service panel. After all, you need to dial a new set of numbers and press the ENTER button to confirm.
There are also some ways to reset a specific key from memory, change addressing and others like that, which are very rarely used. It is necessary to note once again: in the written sets one, two, three, four are the standard master code, which the installing professional is advised to change urgently.
On video: All possible ways to open the Metakom intercom door
In order not to waste your nerves and not frantically search for information on how to open a Metacom intercom at your entrance, you just need to be careful. In particular, you must read from special attention an agreement that specifies an emergency access dial. It would be a great idea to order a multifunctional key if you suddenly lost the contact one. Later it can be attached to a specific apartment by changing the settings of the locking unit.
