Stairs.  Entry group.  Materials.  Doors.  Locks.  Design

Stairs. Entry group. Materials. Doors. Locks. Design

» How to decorate a built-in wardrobe. How to update an old wardrobe with your own hands with photos. Other ideas for DIY cabinet restoration

How to decorate a built-in wardrobe. How to update an old wardrobe with your own hands with photos. Other ideas for DIY cabinet restoration

How to update your closet? If you have a closet in your apartment that has lost its original appearance, but which you would like to update, then you can do it yourself with minimal financial costs. You can update the cabinet facade, repaint the entire cabinet in a different color, or cover it with self-adhesive film.

Cabinet decoration ceramic tiles It looks impressive and stylish, but this is only possible if the doors are securely fastened.

An old kitchen cabinet or cabinets can be updated using leftover wallpaper, film, paint left over from a renovation, or other accessible and inexpensive methods.

How to update a closet using self-adhesive film?

One of the easiest methods for updating a kitchen cabinet is to cover it with self-adhesive film. You can choose a material with wood, marble, a natural stone or skin.

This appearance will give the kitchen cabinet original look. Vinyl film does not allow moisture to pass through, is resistant to temperature changes and mechanical damage, is durable and has a long service life.

Materials and tools:

  • self-adhesive film;
  • scissors;
  • sharp knife;
  • scraper;
  • roulette.

Finishing cabinets with self-adhesive film is simple and functional solution, the film is quickly applied and has moisture-proof properties.

First you need to take measurements of the kitchen cabinet, its fronts, sides, and drawers. To do this, the doors can be removed and placed on a flat surface. Then you need to remove handles and other fittings from the cabinet. After this, you need to clean the surface from dirt using a damp sponge.

Particular care must be taken to remove grease stains. After cleaning, the surface should be perfectly flat and smooth. Irregularities and deformations can be eliminated using sandpaper. If the surface is uneven, then after gluing the film may come off and wrinkle. After cleaning the surface, it must be dried.

You might be interested in: How to properly hang cabinets in the kitchen?

Then on the back of the film you need to put the dimensions of the cabinet parts. Add 1-2 cm to the main dimensions for reserve. Where the film will bend, you need to add 2 cm. If the film has a pattern, you need to arrange the parts so that the pattern matches.

After making the patterns, the material is cut using a sharp knife and ruler. The bends are cut using scissors.

Stickers on certain sections of the facades will refresh the kitchen interior.

Then they begin to cover the front of the cabinet with self-adhesive film. Peeled off small area protective paper from the film, it is glued to the surface. Use a plastic scraper to smooth out the material, removing folds and air bubbles. The parts are glued gradually, removing the paper covering from reverse side 10 cm films and straightening the material using a scraper.

If unevenness does appear in some places, then the film in this area must be peeled off and re-glued. The film is completely glued after a few hours. During this time, all irregularities and deformations can be eliminated.

Then the film is applied to the sides of the cabinet, drawers and shelves. After this, you need to replace the cabinet handles with new ones. Other fittings are also replaced. The updated cabinet parts are then installed in place.

If you need to update not the entire facade of the cabinet, but only its individual parts, then you can make vinyl stickers. These stickers are made of high-quality material, they are quite durable and practical, wash well and do not require frequent cleaning.

Return to contents

Updating cabinets by replacing facades

Materials and tools:

  • cabinet fronts;
  • screws;
  • screwdriver;
  • loops;
  • drill.

Variety of facades for kitchen set gives room for imagination.

You can replace old facades with new ones. They can be ordered from furniture workshops. Facades can be made of inexpensive wood, plastic or chipboard.

You might be interested in: Which handles to choose for a modern kitchen

Ready-made facades can be installed with your own hands. First you need to remove the old doors by removing the hinges and unscrewing all the screws with a screwdriver.

In the finished doors you need to drill holes for the hinges. Then the cupboard doors need to be secured in place using screws.

Return to contents

Updating Kitchen Cabinets with Molding and Paint

Materials and tools:

  • decorative strips;
  • drill;
  • glue;
  • saw;
  • screwdriver;
  • pens;
  • deck paint;
  • marker;
  • spray gun.

The use of molding will add nobility and style to simple doors.

You can update the design of kitchen cabinets by painting and sticking decorative elements(molding). Small strips with a semicircular cross-section are used as moldings.

Before removing the facades, you need to make notes with a marker so that later you can install all the elements correctly. Then you need to clean the entire surface with a damp sponge. Then the parts need to be dried.

It is better to paint outdoors, as paints and varnishes are toxic. The facades must be placed on a surface prepared for work.

Then use a saw to cut out necessary details molding. The edges of the planks are cut at an angle of 45 degrees. The molding is glued to the doors.

After this, mark the installation locations of the handles and screws. Use a drill to make the necessary holes.

Painting a cabinet followed by stencil painting is for the creative and daring.

Then the surface is primed. The primer is applied using a spray gun. After applying the primer, you need to wait an hour for it to dry completely.

Then the surface is painted. To do this, fill the spray gun with deck paint and apply it to the surface from a distance of 15 cm. Then, to create an ornament or patterns, take the necessary stencils. If deformations remain after the paint has dried, you need to paint the surface again.

Then the facades are installed in their place. Screw the screws with a screwdriver to the places marked with a marker.

You might be interested in: How to make a table out of a window sill?

After this, new handles and fittings are screwed on.

Possibility to update old furniture- not only a practical activity, but also very creative. It's nice when your favorite decorating technique and creative impulses can be translated into something as useful as possible, for example, giving a second life to a closet. Reanimating it with your own hands is a fairly simple task despite its impressive scale. Photo examples resulting from innovative transformations will set you in the right mood. The advice will adjust the scope of work, and the video will dispel any remaining doubts and set you up for the success of the event.

New or very old?

The most important thing is to decide on the theme and style of the future transformation. There are initially two concepts in the update:

  1. Give a modern look to a typical example of “Soviet” furniture or a younger piece that has lost its decent appearance. Result: bright accent for modern, avant-garde interiors and other modern design projects.
  2. From particularly interesting models, through not explicit updating, but competent, even greater aging, obtain a unique exclusive sample. Effect: a worthy representative of shabby chic, any vintage style.

There are renovation techniques that require at least some experience or minimal skill as an artist. But there are very simple ones that even an amateur can handle. For different types furniture they will also be different.

We glue

Wardrobe or other simple model It may not be very old in age, but it is the facades - the weak points of such products - that quickly lose all the charm of novelty. Pasting external surfaces Photo wallpaper or photo printing cannot be called a creative process, but visual transformation is guaranteed. Even old wardrobe, decorated with a well-chosen pattern, can take its rightful place, for example, in a nursery.

Wallpapering a closet

Stained glass film will add elegance and presentability to a cabinet located in the hallway or corridor. Another plus is that it will prevent damage, for example when Entrance door opens into the apartment, touching the surface of the wardrobe.

Advice. Self-adhesive films are not durable creations, but this has its own obvious advantage for people who love change.

Wallpapering can work if you choose a wall that matches the design of the wall where the updated version of the furniture will be located. Typical techniques:

  • same color scheme, but different pattern;
  • dismantle the doors and paste over them back wall.

All methods of wallpapering look especially impressive in combination with an indispensable method of restoration - painting. Only the central part of the drawers and doors is covered with wallpaper; the edges and ends (the most vulnerable places) are painted with contrasting, suitable paint. By the way, this combined method, especially with daily use, will allow you to maintain its original fresh appearance for as long as possible.

We paint

An alternative option with its own advantages:

  • low cost and ease of execution;
  • variety of colors and painting methods;
  • lasting result.

Some experts give special preference to acrylic paint for the ability to independently choose the desired color scheme by simply mixing it. With the addition of white paint, you can get as many shades as you like and even use the ombre technique.

Cabinet Painting

An aerosol modification of the paint you like will be relevant for beginners. But in general, you need to take care of purchasing a high-quality roller and brushes different formats, other painting attributes, especially if you don’t plan to stop renovating old things.

Advice. Pay attention to paint with existing special effects in the composition - metallic, mother-of-pearl.

Add varnish and volume

Varnishes are used to give furniture an “antique” feel. And the use of ready-made stencils will allow you to make a painting no worse than a professional artist. Even a simple masking tape used as a stencil for elementary patterns can turn a nondescript cabinet into a bright accent for a modern, high-tech interior.

It is worth noting that the style features are also emphasized by the fittings. Even a bulky, slightly awkward brown giant turns into an exquisite luxurious piece. This is achieved by simply painting the door handles in a light color (for example, ice blue) in the color of aged, darkened gold or brass. Handles with enamel inserts are not a cheap pleasure, but the result of the transformation will benefit significantly from such fittings.

When simple painting becomes an uninteresting process - we complicate the task. A technique such as stenciling with plaster can turn a cabinet that suits the style into a museum exhibit, especially if gilding is used at the end of the work. Decorative plaster allows you to create three-dimensional images, and subsequent painting fixes and emphasizes the result.

All kinds of decorative slats, corners, stuffed or glued with a slight indentation around the perimeter of the doors, in a special way transform a banal polished double-leaf wardrobe into a worthy representative of the Provence or country style. You just have to choose the right paint. The added special effects - patina - look good.

Attention! Professionals advise testing the behavior of unfamiliar paint on a specific surface in an inconspicuous area.

Restoration and preparatory stage

Sometimes furniture is in such a state that it seems easier to throw it away than to try to revive it. It's not all that sad. A few secrets for specimens in poor condition and general tips before decorating:

Applying patina

  • the decayed areas cannot be handled with sandpaper - you will need a metal brush;
  • It wouldn’t hurt to dry the furniture before starting work;
  • putty and rubber spatula are a working duo against surface defects;
  • pre-treatment with a special antiseptic for wooden surfaces is a reasonable precaution.

There are quite a few ways to update your closet. It all depends on the time and money that you are willing to invest in this enterprise. There are more painstaking types of beauty, such as covering with fabric and then decorating with carnations. Nowadays there are a lot of stencils available that allow you to easily repaint a cabinet “like Gzhel”. It all depends on your imagination and desire to try new things, because there are still so many pieces of furniture...

Restoration of an old cabinet: video

Cabinet update: photo














Unfortunately, we often encounter the fact that furniture, once modern and serving faithfully, becomes outdated, loses its appearance and simply begins to spoil the entire interior of the room. At the same time, the very basis of such furniture, as a rule, remains quite strong, and it is simply a pity to throw it away. At such moments it arises interesting idea: what if you try to update the closet (that’s what we’ll talk about in more detail today), table, chairs, armchair, etc.? How to wallpaper a closet; is it possible to correctly apply decor to its doors, thereby transforming the design? Let's try to figure it out in more detail.

First of all, it is necessary to note the fact that restoring a cabinet with wallpaper will significantly reduce the cost of purchasing new pieces of furniture. Why throw away something that can still serve well for at least several years? Today there are many ways to accomplish this. Here are just the most common of them:

  • Using wallpaper.
  • Using photographs.
  • Painting with paint.
  • Update using mirrors.
  • Fabric finishing.
  • Mosaic decoration.

Of course, each of these methods has its pros and cons. Let's just say that they are all worthy and interesting solutions, which will help preserve what, as it seemed, could not be restored and should be replaced. Thus, you manage to reduce material costs, which, as you yourself understand, will save quite a decent amount of money. In any case, before you start decorating, you will need, first of all, to decide which method you will use for this. But since we have decided that this article will be devoted to how to update a closet with wallpaper, then let’s focus on this technology.

How to choose the right wallpaper

Despite the fact that wallpapering is the most affordable, and also, perhaps, simplest way to cover an old cabinet, you need to understand that important stage is right choice material, which must be of high quality. At the same time, the choice of texture and color is not limited by anything other than the imagination and desire of the apartment owner.

Advice! In any case, despite the fact that you can choose shades based on individual preferences, there are certain basic design laws, following which will ultimately help you get an attractive interior.

Here are examples of what you need to consider when decorating cabinet doors or its body:

  • If there are certain designs and patterns on the room wallpaper, it is desirable that the furniture be finished with a single-color coating.
  • Photo wallpaper can also be used to decorate this piece of furniture. In this case, it is advisable to use narrow options.
  • In cases where the wallpaper in the room is pastel or light, it is best for the cabinet to be hung in richer and brighter colors.
  • At the same time, the surface that is inside the cabinet may be a little brighter.
  • Self-adhesive wallpaper for closets is also of increased interest, since their use helps to complete all restoration work at a faster pace. In addition, in this case it is much easier to do the gluing yourself, with your own hands.

As for which particular pattern will be optimal, then, as noted above, this remains at the choice of the owner of the furniture being decorated. Of course, it is advisable to select a material that is easy to wash using special chemical agent. Exactly because of this reason, the best solution will be a refusal to use paper-based cloths, since they cannot be classified as washable. On the other hand, if it is difficult for you, for one reason or another, to refuse this option, it is advisable to apply it on top paper wallpaper, glued to the cabinet, a layer of clear varnish or any other protective coating.

Now a few words about those cases when pieces of furniture that are to be covered with wallpaper have certain mechanical damage on the surface. In such cases, optimal step may be either the use of thick materials (for example, vinyl or non-woven wallpaper), or, as an option, the use of canvases with small and variegated patterns. Such designs will visually hide any scratches or chips.

How to paste: instructions

Before you wallpaper your closet, you need to prepare. To do this, you will need to select certain tools and materials, the availability of which will guarantee high-quality completion of the work. So, here is a rough list of what you may need:

  • Spatula, pencil and ruler.
  • Sandpaper, scissors (a sharp knife will also work for repair and construction work).
  • Materials for preparing the surface for gluing: primer and putty for wooden surface.
  • Glue (you can use ordinary PVA wood glue), as well as a brush for applying it.

Attention! It is necessary to completely decorate the closet with your own hands using wallpaper. In other words, it is necessary to update not only the furniture itself, but also the handles, as well as other additional elements structures, if any. Otherwise, it will look ridiculous if your wallpapered wardrobe is ruined by old handles.

Once you have the tools and materials at your disposal, you can begin preparatory work. So, here are the stages of preparation:

  • Remove all attachments, including internal shelves, handles, decorative ornaments etc.
  • Varnish should also be removed, if any.
  • Wipe with a sponge dampened with water to remove a layer of dust.
  • Putty the damaged areas, if any, and walk over the surface with fine-grain sandpaper.
  • Apply a layer of primer, after which the preparatory work can be considered complete.

Let's move on to gluing. This stage of work is also divided into several parts:

  • Measure each part of the closet and make drawings for the wallpaper pieces. After this, you need to cut out the measured sections.
  • Start gluing. The adhesive composition should be applied using a convenient brush.
  • Carefully apply the prepared and cut sections of wallpaper to the doors and cabinet body.
  • Smooth out the glued sheets. To do this, you can use a special roller or a dry and clean cloth.
  • After the glue has dried (you must prevent drafts in the room), put in place the previously dismantled structural and decorative elements.

Conclusion

As we can see, decorating a cabinet with wallpaper is not such a simple, but at the same time, not a very difficult task. Almost everyone can glue beautiful canvases, update old furniture, and restore it with their own hands. By the way, this opportunity applies to almost all types of such furniture, including bookshelf, coupe, kitchen, etc.

You can see how to properly wallpaper a cabinet in the video instructions for this article:

Nowadays, in stores you can find an endless variety of different wardrobes, chests of drawers, hanging shelves, shelving, multifunctional drawers for personal items and clothing. However, if you decide not to immerse yourself in a long search, but to follow your imagination, then thanks to the following tips and master classes you will learn how to update an old cabinet that has lost its appearance so that it will please your eye for a long time.

3 main ways to update your wardrobe:

  • Painting is the most win-win method.
  • Wallpaper, decoupage, self-adhesive film - when choosing this method, do not forget that it is short-lived.
  • Decoration with nails or fabric covering.

Important! Most The best way to update any wooden cabinet or from chipboard - painting. It is not as expensive as it might seem at first glance and is quite easy to do.

Which paint to choose?

To bring such an idea to life, you need to thoroughly prepare for the process. Let's get started.

For processing chipboard and wood you can use:

  • Acrylic or alkyd, regular or spray paint on wood;
  • for deeper coloring - varnishes, but more often preference is given to acrylic paints.

Acrylic paints are non-toxic and dry when room temperature what in case of painting home furniture Very good. In stores, these paints are presented in a wide range and can be colored - diluted with white paint to get the desired color. In addition, such paints are available with a mother-of-pearl effect, thanks to which you can bring any fantasy to life.

Important! Aerosol acrylic paint will be better than regular paint, as it lays on the surface creating a beautiful, smooth, evenly painted structure. It is easy to work with both professionals and beginners.

Master class No. 1. Stencil painting

What can you make from an old wardrobe? Yes, anything - it all depends only on your imagination. One of the great ways to transform furniture is to paint it with a stencil.

Tools and materials:

  • White paint;
  • Solvent;
  • Brushes;
  • Stencil.

Step by step guide:

  • First, you need to remove all the fittings from the cabinet: handles, locks, etc. Prepare the cabinet for painting.
  • We spread newspapers or a large piece of polyethylene on the work surface (on the floor) so as not to damage other furniture in the room.
  • Take white enamel and solvent. In a small plastic jar, dilute the paint and solvent according to the instructions that you will find on the paint can.

Important! The paint consumption should be indicated on the can - it is better to use the information provided and dilute it immediately required quantity. If you dilute too little paint, you may end up with a different shade next time.

  • Make the background of the picture - apply the first layer of paint. Leave until completely dry.
  • If you like the resulting color, then take a stencil and apply it to your cabinet. Carefully glue it onto front side, side walls so that no bubbles form.
  • Shake the spray paint thoroughly and spray it onto the stencil. One coat of paint will be enough for an even layer.
  • While the paint is drying, paint the hardware that was previously removed from the cabinet gold leaf.
  • After the parts have dried, screw them into place.
  • Carefully remove the stencil from the cabinet - it is no longer needed.

Master class No. 2. Updating a chipboard cabinet

If your closet looks simple and cheap, since it was made of simple chipboard, you can update it with an ornament from a children's room, and it will fit perfectly even into a Modern or High-Tech interior.

Materials and tools:

  • Pre-prepared cabinet;
  • White paint;
  • Masking tape;
  • Pencil;
  • Sponge brush;
  • Building level;
  • Additionally: protective paint (enamel).

Step by step guide:

  • Prepare the furniture by cleaning the surfaces from chips, roughness and cracks using primer and putty.
  • After use special means Allow the surface to dry completely.
  • Take masking tape and apply it to the front of the dresser according to your design.
  • Make combinations of triangles along the bottom and top edges, diamonds in the middle, and rectangles at the bottom and top. Cut the strips and make shapes out of them.
  • Make a diamond by cutting out identical strips and placing them perpendicular to each other.
  • To make rectangles, first apply the tape evenly, parallel to the cut of the chest of drawers, and use a pencil and a building level to mark equal intervals. Cut through one.

Important! Pay attention to the placement relative to the figure (locks, handles) and the gaps between the drawers - it’s better to be symmetrical than even.

  • Following the instructions on the paint can, take a sponge brush and apply a thin layer of paint to create an antique effect. Let the layer dry.
  • After the first coat is completely dry, apply the second. Then the color will be rich and contrasting in comparison with the background.
  • When the paint has completely dried and you see that you have achieved the desired color, carefully remove the masking tape (tape) at an angle of 45 degrees.
  • The final stage is to apply protective enamel. It can extend the life of a chipboard cabinet and protect against small mechanical influences such as dust and moisture.

Thus, making a modern, beautiful and fashionable wardrobe from an old wardrobe will not be difficult and will not take much time.

Master class No. 3. Painting a polished cabinet

Someone may not believe it, but from an old polished cabinet you can make very beautiful wardrobe V vintage style, and without losing functionality.

Materials and tools:

  • Polished cabinet;
  • Acetone or white spirit;
  • Vintage paint (acrylic matte);
  • Gold drawer handles;
  • Brushes;
  • Sander or sandpaper.

Painting process:

  • Although we will create a vintage effect, the cabinet does not need real shabbyness. Therefore, first, carefully prepare the chest of drawers for painting. To do this, remove all the old fittings and sand the entire surface of the cabinet. You should use coarse sandpaper first, then fine-grained sandpaper.
  • It is not necessary to putty and prime, except for severe chips on the surface.
  • Degrease the surface with acetone or white spirit and let dry.

Important! Since the paint will be applied in several layers, it needs to be well absorbed into the wood.

  • Make the first coat of paint very thin.
  • Once dry, sand the first layer with fine-grit sandpaper. Clean the chest of drawers from dust, but do not use wet sponges and rags - you can use a dry, lint-free cotton rag.
  • Apply a second coat of paint, also rubbing it in. Leave to dry and then rub in a little again.
  • Repeat this until the color is even and slightly rough.

Important! For this method, use matte paint with a vintage effect. After a few days, the paint will be completely absorbed and begin to turn yellow - carefully read the instructions on the package so that you don’t have to repaint everything again later.

If you purchased new handles, check that they are the right color and screw them into place.

Important! Carved brass handles with golden patterns will go well with an aged white chest of drawers.

Update with wallpaper

Updating an old cabinet with wallpaper is one of the simplest and cheapest options for restoring such furniture. For these purposes, you can use absolutely any wallpaper that you like or that suits the design of your room.

Important! Non-woven or non-woven fabrics are often used vinyl wallpapers, since they have high strength.

Using this method, you can completely renew the design of an old cabinet or in separate parts. Partial wallpapering of a closet is an interesting creative solution that is used by many famous designers to create an unusual look.

You will need:

  • Roller or brush for applying glue;
  • Glue (preferably PVA)
  • Construction knife;
  • Wallpaper.

Important! If you don't know how to update your old cabinet with glue and wallpaper, then you can buy self-adhesive wallpaper, thanks to which it will be much easier for you to achieve your plans.

To transform an item you should:

  • measure the length of the cabinet;
  • cut off suitable strips of wallpaper;
  • apply glue to the surface of the cabinet itself;
  • carefully place the wallpaper onto the adhesive surface;
  • then smooth the wallpaper so that no bubbles form and let it dry thoroughly.

Updating using mirrors

One of the most extravagant ways to update furniture is to use mirrors.

Important! They can not only hide all the imperfections of the closet, but also expand the space of a small room, while making it brighter. Mirrors with a sandblasted pattern look original.

You will need:

  • Pre-prepared furniture;
  • Mirror canvases;
  • Special fasteners or “liquid nails”.

How to proceed:

  • First, you need to measure the surface of the furniture that needs updating.
  • Then you should contact a workshop that makes mirrors - they will make them for you in the required size.
  • Next, you need to apply “liquid nails” to the mirrors and attach them to the surface of the cabinet.
  • This concludes our review possible options updating an old cabinet. We hope that the proposed ideas were useful to you, and you have already tried them, having received excellent result and a lot of fun!

7282 0 1

How to wallpaper a closet: methods for restoring furniture

You can update good old furniture with your own hands. Wallpapering a closet is the most affordable design technique that does not require skills or investment. I’ll tell you about budget-friendly ways to restore furniture.

The essence of the problem

Over time, furniture loses its novelty, looks old-fashioned, does not fit into the interior of the room, and has defects: scratches, cracks, chips. You can update your closet with your own hands in one day. There are methods of furniture design that are accessible even to a beginner, without skills or knowledge.

The most popular technique is wallpapering. Using scraps wallpaper, which remained after the renovation, you decorate the closet and update the interior. You can cover your wardrobe with identical canvases or combine pieces of different types. In any case, your furniture will become exclusive.

Wallpaper selection

A good result depends on the quality of the wallpaper. You should not take thin paper ones - they quickly get wet, tear and cause difficulties in work.

Take vinyl ones, or better yet non-woven ones. This category has a dense, elastic base that can stretch. These types are convenient for covering corners and joining fabrics.

Color, pattern and texture must be in harmony with the decor and are chosen individually. I offer a few examples:

  • For a room in light colors, the cabinet is made bright or to match the walls, but with a catchy pattern.
  • Colorful pattern of wall covering - the cabinet must be monochromatic.
  • In small rooms, the technique of monotony is used. The furniture facade is made in unison with the walls.
  • For kitchen cabinets, choose marble or wood texture options.
  • Lovers non-standard interiors use photo wallpaper.
  • Self-adhesive wallpaper greatly simplifies work and is relevant for facade decoration.

It is important to consider performance. The roll label schematically displays moisture resistance and UV tolerance. Large defects and gouges on external panels can be “hidden” under canvases with thick colors, fine patterns, and vinyl coating.

Wardrobe pasting

Any closet can be decorated. Pasting is used not only on facade panels. Restoration can affect all parts that will be periodically in front of your eyes: the entire interior space, including drawers.

Decor of the facade, doors and side walls

If partial pasting is planned, then the façade cannot be ruled out. This is the central element that is constantly in sight. You can exclude updating the internal drawers and side walls.

Decorative design has several options: a single coating or alternating several materials. Many people prefer to use wallpaper patchwork. A similar technique consists of alternating different wallpapers, cut into squares or rectangles. Ready product pleases with brightness and variety.

Color and stylistic decisions depend on your taste, desire and general design premises. Experiment with shades, contrast, patterns. In a monotonous room with pastel walls make a creative closet with rainbow colorful doors.

Decor of the back wall of the rack

The rack has no doors; the back wall is visible through the open shelves. An excellent solution would be pasting interior panel. Any items installed on shelves will look advantageous against a beautiful background: dishes, figurines, vases, souvenirs, etc.

When decorating the back wall of a shelving unit, choose wallpaper that contrasts with the walls. Your task is to designate and highlight the closet. Walls with patterns and geometric patterns look interesting.

You can use textured plain non-woven fabric or vinyl left over from the renovation of the next room. This technique connects the rooms and creates comfort.

If the rack has a sectional design, then for each part select different wallpapers. You will get a large-scale imitation of patchwork.

Decor inside the closet: drawers, walls, doors

The facade of the cabinet is assessed by the guest, only the owner looks inside, so not everything is decorated inner space. If a good appearance is important for the interior, then the filling pleases only the household.

Wallpaper can be used to decorate the backs of doors, shelves, interior walls cabinets, drawers. Parts of the cabinet hidden from prying eyes will create a neat appearance. There are no special recommendations here, it all depends on your preferences or the availability of wallpaper leftovers.

Some people like it when the open door is bright red, others match it with exterior decoration. The predominance of monochromatic items in the wardrobe will complement well interior decoration with ornaments or bright flowers. For any options, two-color stripes or small checks are suitable.

Self-adhesive is applied only to a clean and grease-free surface (alcohol, solvent). If bubbles appear, they are pierced with a needle and smoothed out with a dry cloth.

Required tools and material

  • Ruler/roulette,
  • pencil,
  • brush/roller,
  • scissors,
  • sharp knife,
  • PVA or wallpaper glue,
  • sandpaper,
  • putty knife,
  • wood putty,
  • primer,
  • napkin/rag,
  • wallpaper.

During furniture restoration, it is advisable to change handles and lock linings. This important point in updating the exterior.

Preparation

First of all, handles, moldings and other fittings located on work surfaces are dismantled. Empty the closet of stuffing: linen, shelves, drawers.

We prepare the surface for pasting - it should turn out smooth and matte. Lightly sand the surface of the wood.

If the cabinet is varnished, then it needs to be cleaned of varnish. This will help Sander, the second option is sandpaper and physical effort. Finally, remove the dust with a damp cloth and dry.

We inspect for defects. If there are chips, damage, or cracks, cover them with putty. After drying, sand it with sandpaper and prime it. The cabinet is ready for gluing.

Wallpapering

Pasting process - The final stage and the most responsible, the appearance of the updated cabinet depends on the quality of the gluing. The work consists of several stages.

  1. Take measurements of the selected part.
  2. We transfer it to the canvas, make a pattern or cut it to the required length.
  3. We coat the resulting sections with glue and apply them to the selected part. If the base of the wallpaper is non-woven, then the glue is applied to the surface of the cabinet.
  4. To fix, use a dry cloth or roller.
  5. After drying, the next day, install the fittings.

When using wallpaper glue, add a little PVA to it (1 tablespoon per 1 liter). When drying, avoid drafts, open windows the wallpaper will crack or come apart at the seams.

Budget restoration of products

You can turn old furniture into new without much investment. Desire, imagination, skill and knowledge of several methods of budget restoration. You already know about wallpapering, there are other techniques you can

  • cover with fabric
  • stencil paint,
  • covered with artificial leather,
  • use decoupage technique,
  • stick photo wallpaper,
  • use glass painting,
  • apply decorative plaster,
  • A convenient option is self-adhesive and stained glass film.

These methods are suitable not only for wardrobe, they are used for chests of drawers, bedside tables, wardrobes, kitchen cabinets, whatnots, sideboards, for furniture located in the corridor, hallway.

Furniture, decorated with wallpaper or having decoupage, the fabric surface should be placed in dry rooms. In an unheated dacha, the coating may deteriorate from excess humidity.

Application of three-dimensional drawings

The restoration can have a three-dimensional image effect. These are not 3D pictures, but stencil painting and decorative plaster. Today this method is in fashion and is often used in interiors to create decorative elements and wall paintings.

The painted/plastered surface is not afraid of moisture and protects furniture from negative impacts. Can be used in the bathroom, toilet, and country houses.

The work does not require expensive materials. Square meter decorative plaster will cost 300 rubles.

At the same time, there is a huge range of colors and effects: suede, mosaic, velvet, Provence, marble, rustic, milling, etc. For interior work take silicone and rubber, they do not crack.

Decorative plaster

To apply the design, you will need a stencil, paint, spatula, brush, furniture varnish. The action algorithm consists of 10 points:

  1. Removes fittings.
  2. We clean off the peeling coating.
  3. If there are cracks, we eliminate them with putty.
  4. We go through it with sandpaper.
  5. We fix the stencil with masking tape.
  6. We dilute the plaster and apply it with a spatula.
  7. After partial drying, remove the stencil.
  8. We correct the damaged contour with a knife. Leave to dry completely.
  9. The next day we sand with fine-grained paper.
  10. We apply paint.

Furniture varnish gives a good effect. After application, the colors become richer, the product retains its updated appearance longer.

Stencil drawing

Plaster is effective, but requires a lot of effort; it’s easier to work with paint. Using a stencil, you will create a masterpiece much faster. Here are some tips for painting furniture:

  • The design will last longer if the surface is cleaned old paint, dust and grease stains.
  • On a white background the pattern will be more contrasting. For this purpose the product is painted in White color, and then a stencil is made.
  • Gold/silver handles and fittings add additional beauty.
  • It is advisable to perform stenciling using aerosol cans.
  • The basic background can match the decoration of the walls, and the pattern is made contrasting.

Painting polished furniture

Chipboard, a natural wood that has an aged, polished finish, can be painted. To do this, use matte acrylic paints. Should be removed from the surface upper layer(coarse sandpaper), fill chips/cracks and degrease with white spirit.

The paint is applied in 2-3 steps. After drying, each layer is polished with fine sandpaper. At the end of the work, if you want to get something exclusive, facade spot painting will be done. Use a thin marker to outline the design and color it in. acrylic paint(a brush is used).

How to Update Kitchen Cabinets

The kitchen has a different microclimate from the rooms. Steam and moisture often occur here, furniture is exposed to aggressive temperatures and greasy fumes. Kitchen furniture, in such conditions, they quickly lose their originality and require washing or restoration.

Update kitchen cabinets Can be painted, self-adhesive film or rattan fabric. The paint should be moisture-resistant acrylic or alkyd enamel, oil paint. These compounds have good coverage and give a glossy shine.

Before work, the doors are removed from their hinges; in the case of a compartment, they are dismantled, cleaned, and degreased. The primer is applied with a roller.

Start painting from the edge and back of the doors. You will need to create two layers. The first with a brush, the second with a paint pad or roller. If the color saturation does not satisfy you, paint a third time.

In this way you can paint not only kitchen cabinets, but also room furniture (bedside tables, chests of drawers, wardrobes).

When painting in several layers, the coating must dry, see the instructions on the can. For an updated cabinet, new fittings, moldings, and rails are purchased.

To update your furniture, you can use the advice of designers:

  • Make the wardrobe in the children's room bright, using children's pictures made with dot painting.
  • Decorate glass/mirror wardrobe doors vinyl stickers or stained glass film.
  • The wardrobe will transform artificial aging, decoupage.
  • Paint an antique sideboard white and apply a contrasting pattern. Decorative plaster is also appropriate here.
  • You can make your living room closet unique with a collage of family photos.
  • Photo wallpaper looks great on large doors.

Before staining, on wooden facades You can use a milling cutter to make panels and other decorative elements.

Conclusion

Now you know how to save money and restore old furniture. Using any method, you will create a new colorful object in the interior.

In the video presented in this article you will find Additional information on this topic. Share your restoration experience in the comments.

June 15, 2018

If you want to express gratitude, add a clarification or objection, or ask the author something - add a comment or say thank you!