With the course of progress, everything and even the purpose of things changes. The most common baguette in ours has more extensive areas of application.
Back in the last century, planks of wood were used to create various types frames and cornices.
But over time, the scope of application began to expand, and the products received names: molding, baseboards, fillets, platbands.
All of them rightfully deserve their unique name, because each product belongs to a specific part of the room, such as the ceiling or floor.
Nowadays, old manufacturing technologies no longer exist and many substitutes from other materials have appeared. Baguettes can even be made of plastic and in the style of space wars.
Many models of baguettes are very necessary, for example, aluminum or steel allow you not to worry about mechanical influences and last much longer than wooden ones, but they are unlikely to be suitable for rooms with a humid environment.
The best material for a baguette is still wood. Even today there is no more acceptable material for painting. It is worth noting that many frame structures are created by hand and convey a touch of the unique skills of the craftsman.
Country and Provence styles cannot do without wooden baguettes, but its capriciousness and difficult maintenance conditions leave the material behind its competitors.
Wooden baguettes are not only elegant and unique, but also emphasize respectability in the room. Still, this is not enough to lead the sales market. Even plastic baguettes can easily replace these leaders of their time.
In addition, they are very flexible and lightweight, which allows you to attach the structure yourself and to uneven surface. As for the assortment, all that remains is to enjoy the extensive color palette and a variety of models.
Plastic models are used for installing suspended ceilings and other ceiling structures.
In appearance, they look like plinths with places for locks, most often in white tones. For special connoisseurs and those who do not mind spending money, there are even decorative models.
The most natural models made of wood and plaster. The most durable models are made of aluminum, and the cheapest and at the same time lightest models are made of foam plastic.
Baguette is used to hide joints and complement the overall design of the room. Attaching the entire structure does not take long and is quite simple. In most cases, a special glue is sufficient.
You can even attach baguettes to a clock on the wall. Simply put, all work with baguettes is limited only by imagination and ingenuity. The main thing is to follow all the rules and be able to correctly join the baguettes, for example in the corners.
If everything is connected correctly, then the whole room will have smooth transitions, and this is important for comfortable design. But if you need to attract attention, then it is better to use contrasting models and add curtains to them.
A designer who knows his business will not miss even such little things as mirrors and posters on the walls.
Using baguettes correctly, you will create an interior with a twist that is rarely found or not repeated at all in other design projects.
Baguette decorative type, will allow you to change the emphasis and bring a new sound while using old attributes.
Here are some more tips from experienced designers:
It's always better to experiment before making a final decision. In addition, the palette of shades and types of models allow you to choose exactly what you like.
Combine all the moments correctly so that you feel the measure and style and other design nuances. Then you will be able to achieve the most acceptable result for you.
Sometimes, after the renovation is completed, there is no feeling of integrity and harmony in the room. Neglecting decoration techniques can result in a visually unfinished interior. A ceiling baguette can solve this problem - one of the popular types of final decorative finishing premises.
Baguette- This decorative frame along the line where the walls and ceiling meet in the form of a plank, used to decorate a home.
Decorative ceiling moldings-cornices have high aesthetic and practical value in the interior. With their color, shape or size they can emphasize exquisite wallpaper, soften the color transition between walls and ceiling, or carefully walk along the border of combining different finishing materials. A ceiling molding can mask minor construction and repair errors, uneven joints between wallpaper or imperfect corner geometry.
Ceiling baguettes are made from various materials. When choosing, you should focus on the type of decoration in the room, the type of ceiling (painting, drywall, tension), style in the interior and according to your own taste preferences.
Ceiling foam plinth
The most popular type of skirting board.
Advantages:
Advice! If you want to save on repairs, choose foam ceiling plinth. This is a practical, beautiful and economical solution!
Flaws:
Baguette from natural wood considered the most expensive. It is installed using self-tapping screws on wooden triangular blocks pre-fixed between the walls and ceiling. The screw caps are masked with decorative plugs or covered with special putty if the baguette is to be painted.
Advantages:
Flaws:
Advice! To extend the life of a wooden baguette, treat it with an antifungal agent, and then periodically apply a special protective solution. Remember that the room in which you are located wooden crafts, it is necessary to ventilate regularly.
When choosing a plinth, you can find a wide variety of design forms and variations: from a laconic, discreet thin strip to a wide, carved, richly decorated baguette.
The width of the bar ranges from 3 to 25 cm, and some individual specimens may exceed the maximum value.
Advice! Before deciding on the width of the baguette to purchase, evaluate the height of the ceilings in your home. In rooms with low ceilings A plinth up to 10 cm wide would look more appropriate. Massive wide baguettes are suitable for rooms with high ceilings.
The choice of shape and pattern of the ceiling molding is no less varied - these are curls and bas-reliefs, plant and animal patterns, geometric and openwork patterns.
When choosing a ceiling plinth, use our tips:
Three simple tricks when choosing colors ceiling plinth:
Thanks to wide variety decor and style, foam and polyurethane baguettes can be used in both classic and modern interiors. For a minimalist style, a thin baguette with a discreet design is suitable. In the kitchen and bathroom it is appropriate to use a moisture-resistant plastic baseboard.
Despite the high cost, a natural wood baguette is durable, and even with aging it will give the room an elegant vintage spirit. Carved wooden baguettes look great in classic living rooms, while more modest and unpainted ones look great in Mediterranean interiors and rooms in style Provence.
Using a baguette, geometry is emphasized, which can be very diverse.
If previously the joints between the walls and the ceiling were covered with a panel or a strip of embossed paper, now the curvature is better smoothed out by a baguette or plinth. It gives the room unique look, hides some mistakes when carrying out repair work. This article will tell you how to glue baguettes, how to cut them and mount them in corners.
Sticker. How to attach a baguette
When installing ceiling plinths, several advantages can be identified:
Tip: Before gluing, you need to know what is used to make them. various materials. Products come in different textures, widths, smooth or patterned. This affects the cost, purpose and application features for different interiors.
For the manufacture of molding, ceiling plinth or frieze, the following are used:
The most popular products are made of polystyrene foam and polyurethane. Concerning plastic products, then they are used only for stretch and PVC panel ceilings. Wooden baguettes – with a wooden structure.
Before gluing ceiling moldings, you need to think about the adhesive composition. Each installer has their own proven glue when installing.
He can be:
Acrylic and silicone adhesives allow you to quickly and conveniently install ceiling plinths. They go on sale in pistol-sized tubes. The composition is applied quite easily, and the diameter of the outlet spout controls its consumption.
How to glue a ceiling baguette with one or another composition will tell you the information included with the material. detailed instructions. The disadvantage of such adhesives is their high cost, which is especially noticeable when performing work in a large apartment or house.
Note: The cheapest DIY bonding option is regular finishing putty or drywall adhesive if used during the renovation. This composition is more reliable, hardens faster, which allows you to paint the ceiling and baguettes within half an hour, without fear of damaging them with a roller.
The disadvantage of using putty as an adhesive is the lack of convenience when working with it. It is not very convenient to apply such building mixtures with a spatula in a thin layer on a baguette.
After gluing, the remaining putty or drywall adhesive will need to be carefully removed with a wet brush. Otherwise, clumps of dry mixtures will become visible from under the paint.
Tip: Installation of the plinth should begin from any corner of the room.
The ceiling molding can be attached in two ways:
Tip: Usually baguettes are white, so before working, be sure to wash your hands well with soap to prevent contamination of the products. Or, you need to work with clean gloves.
The gluing process is quite simple, but problems arise with cutting corners.
Subtleties of the work technology:
Advice: You cannot expect that such cracks can be masked with paint or by gluing wallpaper on the ceiling; this will not work. The glue smeared on the ceiling and walls must be carefully removed, as shown in the photo.
Work order:
Tip: Coloring ceiling cornices should be carried out especially carefully so as not to damage the glued wallpaper. It is best to do this before installation.
The main advantage of this method is that there is no need to adjust the wallpaper to fit the baguette. The framing will hide all existing burrs and distortions in the upper part of the wallpaper.
This option can be found quite often. This is what many professionals prefer.
The order of work is as follows:
Tip: Painting the baguette the same color as the ceiling gives the visual effect of a monolithic structure.
The main advantage of this method is that all defects can be easily corrected; the frieze is painted at the installation site, and there is no fear of damaging the wallpaper.
Preparing corners and joints is the most difficult and painstaking job of installing a frieze on the ceiling.
To work you will need:
Tip: The adjustment of the last plank should be done by cutting out the corner to avoid damage to the material if an error occurs.
To correctly trim the ceiling plinth in the corners, you must follow some rules.
If all the corners in the room are equal and equal to 90˚, then:
Only in this case will it be possible to carefully trim the corners using a miter box.
The order of cutting corners:
The order of work is as follows:
The corners of the ceiling plinth are glued as indicated on the product label, in the same way as the main profile. For those who are interested in gluing baguettes to the ceiling, the video presented in this article shows in detail the entire process from start to finish. After installing the baguettes, you can give them an original decorative look using spray paint.
7304 0 0
Have you decided to glue a baguette onto the wallpaper, but don’t know how to do it correctly? I will tell you how to do the installation yourself and what you will need for this. In addition, you will learn about the pros and cons of gluing baguette over wallpaper.
Arguments for:
Cons:
So, is it possible to glue a baguette on the wall to the wallpaper? It is possible, but if you decide to install ceiling skirting boards on top of the existing finish, consider the following requirements:
| Illustrations | Varieties by configuration type |
 |
Ceiling plinth. These are profiled strips that imitate stucco and are installed along the line where the ceiling and walls meet. There are solid varieties on sale and those with the ability to install backlighting. The main distinguishing characteristic of the plinth is its width. As a rule, the larger the footage of the room, the wider the baseboard used. |
 |
Molding (border). This is a profiled plank, as in the photo, which is installed as a border in the center of the wall. Molding can be used as an alternative to ceiling plinth. |
| Illustrations | Varieties by type of production material |
 |
Polyurethane plinth. Such products are elastic, and therefore they can be attached not only along straight walls, but also along columns and other architectural structures with a complex configuration.
|
 |
Polystyrene foam baseboard. The advantage of high-density foam products is their low weight and ease of machining. The disadvantage of foam skirting boards, in comparison with polyurethane analogues, is their rigidity and the impossibility of deformation. That is, it is preferable to glue foam baguettes along the perimeter of smooth walls. |
 |
Wooden plinth. Wooden baguettes are used extremely rarely, since the price of the products is high. Such products can only be installed on perfectly flat walls. |
 |
Wallpaper panels. These are not baguettes, but their paper imitation. The advantage of this finishing material- cheap price and easy to stick. The disadvantage of the solution is its budget-friendly, unpresentable appearance. |
What to choose from the listed options? Due to its light weight and easy installation, the best choice- these are polystyrene foam baseboards. By the way, as an alternative, you can use paper panels, the installation of which is not difficult at all.
| Illustrations | Glue recommended for baguettes |
 |
Assembly adhesive on acrylic base
. Such compositions are commercially available as “Baguette glue”, “Liquid nails”, etc. Adhesive based on acrylic resins does not corrode polymer materials, and therefore suitable for installation of any ceiling plinths and borders.
|
 |
Cyanoacrylate glue. Such compositions include Akfix 750, Hencel Moment, Loctite 454, etc. A distinctive characteristic of cyanoacrylate adhesives is their rapid drying, which simplifies the installation of skirting boards by weight. Like acrylic glue, cyanoacrylate compounds do not corrode polymer surfaces, and therefore can be used for installing products made of foam plastic and polyurethane. |
 |
Styrofoam glue. Installation products such as “Titan” Wild are traditionally used for gluing foam curtain rods. After drying, the product forms a hard, colorless or transparent layer with excellent adhesive properties. Adhesive setting at room temperature, on average, occurs in 20 seconds. |
| Illustrations | Step-by-step instructions |
 |
Trimming skirting boards. Since installation starts from the corner, you need to trim the corner connection in advance, as shown in the diagram. For these purposes, we use a miter saw or a miter box with a hacksaw. The proposed scheme is relevant if the angles between the walls are right. If there is curvature, the cutting will have to be adjusted with a knife.
|
 |
Installation. Glue is applied to the underside of the baseboard in accordance with the type of ceiling. If the ceiling is suspended, then we apply glue to the part that is adjacent to the wall, and if the ceiling is ordinary, then we coat both sides. We hold the prepared plinth strip for a minute, after which we put it in place. Having applied the bar, we carefully press it along its entire length, but try not to damage it. |
 |
We seal the joints. To make the joints between the pieces of plinth look solid, coat the ends of the cuts with acrylic sealant and then connect them with a little force. While the sealant dries, the joint is secured with pins or toothpicks, which will prevent the seam from coming apart. |
 |
Remove excess glue. Using the corner of a spatula, we pass along the longitudinal edge of the glued plinth, removing any excess glue that appears. If whitish marks remain on the wallpaper, before it is too late, they should be wiped off with a clean foam sponge soaked in water. |
Now you know what and how to glue baguettes to wallpaper. You will find more interesting information on the topic by watching the video in this article. If you have any questions or have your own thoughts on working with baguettes, write about it in the comments.
July 5, 2017If you want to express gratitude, add a clarification or objection, or ask the author something - add a comment or say thank you!
Baguettes for the ceiling are decorative skirting boards of different widths and appearances, which are used to aesthetically decorate a room and give it a harmonious appearance.
It is advisable to complete any renovation in a room by installing such skirting boards, because without them the ceiling joint with the wall will be unsightly. The method of gluing baguettes is simple, but requires strict adherence to the instructions.
Baguettes (other names: moldings, baseboards, friezes, fillets) perform a number of practical and aesthetic functions. First of all, they are designed to elegantly design the transition from the wall surface to the ceiling. Also, baguettes perfectly mask small defects in walls and ceilings: differences, unevenness, roughness. You can use baguettes with any type of finish: they attach perfectly to concrete, putty, paint, and wallpaper. The advantages of using skirting boards are obvious:
Calculate required quantity baguettes are very simple. You need to measure the perimeter of the room and divide the figure by the length of one product (usually it is two meters). The result should be rounded and a couple of skirting boards should be added in case of unforeseen damage.
Depending on the material used, ceiling plinths are divided into the following types:
For long, narrow rooms a good option– wide baguettes. In rooms with low ceilings, it is worth gluing thin skirting boards. For curvy classic interiors large, pompous-looking products for stucco molding are perfect, while for high-tech and minimalism they buy modest white baguettes without relief or patterns. To make the walls taller, the molding must match the color of the ceiling, and to visually lengthen the room it is matched to the shade of the walls.
All compositions suitable for gluing can be divided into silicone, acrylic and polymer. First you need to purchase the baseboard itself and only then buy glue for it, because the composition must ideally match the finishing material. The cost of adhesives varies, but there is no need to save too much: with low adhesion, the baguette will quickly come off, often this happens even during painting. Heavy fillets are additionally attached to self-tapping screws, the heads of which are then carefully covered and painted over.
The easiest way to glue baguettes is to use regular finishing putty or drywall finishing compounds, which are often left over from the main repair. The acrylic mixture, sold in the form of dry powder in bags, is best suited. This method of fastening has a number of advantages:
There are also disadvantages to using putty as glue. Applying it in a very thin layer is quite inconvenient, because the baguette is narrow and long. Before use, each batch of dry mixture will have to be diluted and the floor covered. The last point is related to the difficulties of removing dried material from any surfaces. If applied carelessly, pieces of putty may stick out from under the baseboard, so you need to work carefully and slowly.
Professional adhesives are characterized by high viscosity and a sufficient degree of adhesion, do not spread and can hold heavy types of baguette. They are widely used experienced craftsmen, because they are easy to use, economical and dry very quickly.
Cons special adhesives there too. Most of them contain solvents, so after gluing the baguettes there will be bad smell, and the room needs to be ventilated regularly. For fragile, thin foam that does not have polymer coating, such products may not be suitable: they will ruin the inside of the baseboard and dissolve it.
This type of glue combines perfectly with all types of ceiling moldings. Due to their high adhesion and adhesion, liquid nails hold even heavy products on the ceiling without losing strength for many years. The skirting boards glued with them can be washed and painted several times without compromising the quality of adhesion.
For work with ceiling fillets, the following types of liquid nails are used:
There are two the right way gluing ceiling moldings. The first is joining before wallpapering, the second is gluing directly to the surface of the wallpaper. The technology for carrying out the work will be different depending on the chosen method. In any case, before installing the baguette, you need to wash your hands thoroughly so as not to stain the snow-white products, and also take care of safety (wear a respirator, ensure the room is ventilated).
If the base is clearly uneven, before gluing the fillets it will have to be leveled with plaster or putty, which is especially important when working with gypsum and wooden skirting boards(they are less flexible). The closest attention is paid to the ceiling and walls in the corners: there all the irregularities after attaching the baguettes will become most noticeable. Minor defects can be left unchanged, but then it is better to use polyurethane or polystyrene foam baguettes, which can easily hide such defects.
For puttying, purchase a suitable dry mortar, dilute the portion with water according to the instructions. Fill the recesses with the mass. To make the wall perfectly even, apply a thin layer of putty over the entire area. The last layer is made as a finishing layer, using a fine-grained snow-white mixture and leveling the mass wide spatula. The ceiling is prepared in the same way (at least in the place where the baguette will come into contact with it). If the ceiling is smooth and painted, no preparation is required.
It happens that the wallpaper is already pasted, and only the baguette needs to be changed. In this case, you need to prime the areas that will be covered with baseboards and let the primer dry. After the installation of the baseboard is completed, before painting, the part of the wallpaper in contact with it must be covered with masking tape so as not to get dirty.
For styling LED strip It is recommended to make markings in advance, ensuring that the baguette does not fit tightly to the ceiling. Usually draw a line with a pencil 3 cm from the ceiling - the upper border of the baguette will run along it. There is another marking option: drive in nails at the required distance, pull a thread, which you can use as a guide when installing the plinth.
Professionals immediately cut the baguettes for convenience, then you don’t have to be distracted by this process in the midst of work. But beginners should not do this; it is better to take all measurements and cuts directly during installation. If possible, glue the baguettes without joints, making them solid. Parts into corners (external and internal) are cut using a miter box, although specialists often do this by eye.
To work you will need the required amount of baguettes and glue, as well as some accessories and tools:
After installing the baguette, you need to let the glue dry completely, then putty the joints. The finished seams should be sanded with fine sandpaper, and the baguettes should be painted along the entire length.
Typically, wooden baguettes are used to decorate interiors in classic, eco- and country styles. Such products look best with a wooden ceiling. They have a lot of advantages: environmental friendliness, attractiveness, resistance to mechanical damage. Typically, liquid nails are used to attach lightweight wood moldings, and the work in this case is carried out in the same way as described above. Heavier products are secured in a different way:
Most often, such baguettes are used for finishing walls and ceilings. plastic panels in the kitchen, bathroom, veranda. Often they come complete with panels, have a special groove inside for fastening and are installed only when the panels are attached.
First, install the frame under plastic trim, the rail of which on the ceiling or wall will become the basis for baguettes. The latter are attached with staples or self-tapping screws directly to the frame, measured in advance in size and sawed with a hacksaw.
To form joints and corners, special connectors are used, which are attached to glue for reliability. If the installation turned out to be inaccurate and there are gaps between the baseboards, they are coated with transparent or white silicone sealant.
In this case, the baguette will cover the junction of the wall and ceiling without attaching to the canvas. A small gap is left between the baseboard and the ceiling, or it is made larger for ease of installation of lighting. The easiest way is to glue it to suspended ceiling baguettes made of PVC, polyurethane or polystyrene foam with a wide vertical side. The only difference in the work will be that the glue is applied only to the vertical of the baguette, and the end in contact with the canvas remains clean. Otherwise, the technology is similar to that for attaching other types of baguettes.
Each method of installing skirting boards has certain nuances and features that the master needs to take into account.
This method must be used if there is already wallpaper in the room, and only baguettes need to be replaced. The advantage is that they hide burrs and uneven edges of the wallpaper: all defects will be reliably sealed. The method also has a downside: if you need to change the wallpaper, you will have to tear off the ceiling plinth.
The operating procedure is as follows:
The difference between this technique is that first the baguettes are glued to the ceiling, then all seams and gaps are sealed with putty and sealant, and only then do they move on to the final finishing of the walls with wallpaper. To ensure that the wallpaper line is perfectly even, they are glued with a margin, and then carefully cut off with a sharp knife strictly under the baguettes.
Joining the baguettes at the corners is the most difficult stage of the work. The quality of cutting of products will depend on general form rooms, especially the ceiling. To cut skirting boards you will need a miter box, which you should practice with in advance on small unnecessary pieces.
The plinth must be placed in the miter box as it will be located on the ceiling, the lower part should be pressed against the side of the instrument. Make a cut to create an angle of 45 degrees. This is true for a room with even right angles (90 degrees). If the angle is not straight, it is adjusted to the desired value using a sharp knife manually. Do not allow hangnails to appear or immediately carefully cut them off with a knife.
Depending on the type of skirting boards, there are a number of nuances that need to be taken into account during installation.
If there are concerns that the plinth will not stay between the wall and the surface, and the base has defects, it is recommended to use polystyrene foam models. They are so easy to use that when gluing to wallpaper the base does not require any preliminary preparation.
Instructions for using light skirting boards:
Sometimes relief moldings made of plaster or polyurethane are attached between the wall and the ceiling. It is not advisable to glue them to wallpaper, because the latter may not withstand such a heavy “burden”. Therefore, the order of work will be slightly different:
Wood products are even heavier, so they need to be fastened much more securely. Fragments of skirting boards are cut with a hacksaw according to the size of the walls, in the corners - at 45 degrees. The ends are sanded with sandpaper so that the joints are neat. Next, make markings according to the width of the plinth along the entire perimeter of the room and drill the parts with self-tapping screws, recessing the caps deeply.
Additionally, you can use gluing with liquid nails so that the baguettes are held on the wall and do not change position during drilling. Afterwards, the skirting boards are sanded, puttied, varnished or painted.
The procedure for working with such skirting boards will be similar to the previous options. The only difference is that the gypsum fillets are placed on a thick layer finishing putty based on gypsum. The remaining mass is removed with a spatula. It is important to cut the corners and ends very evenly, avoiding the appearance of jags, they will greatly damage appearance finishing.
Over time, any skirting boards, even the most expensive ones, can turn yellow. Therefore, it is recommended to paint them to make them more aesthetic appearance, and also certainly hide all joints and defects. This way the baguettes will look beautiful and last longer, without requiring replacement during each repair.
