Often in small apartments there is not enough space to store things, so they are often in plain sight, creating clutter.
If you're tired of this, then you should think about it.
Let's look at how to install it in the hallway yourself.
Before starting work, you need to collect the necessary tool:
The most popular material for the construction of wardrobe walls is laminated chipboard 16 mm thick.
This is not a mandatory material; if you want to save money, you can use gypsum plasterboard or fiberboard, only after assembly this material will need to be further refined.
But it is worth remembering that using leftover material, the result will be appropriate.
You can also use MDF to build a wardrobe, furniture boards sold in construction stores. It is worth noting that this material is slightly cheaper than laminated chipboard.
Solid wood– the most environmentally friendly, natural material, but quite expensive, especially if you buy already cut and planed boards with groove fasteners. Despite the high cost, many ordinary people prefer this particular material for making furniture with their own hands, for its advantages:
The material can be purchased everywhere, but when used, the cost of the structure will increase several times.
For doors, it is better to purchase non-staining materials. The most preferred is - patterned glass or mirror. Laminated chipboard with a thickness of 10 mm is also suitable for doors.
Once the issue with the manufacturing material is resolved, the next problem arises - accessories and content:
It’s worth noting right away that the more fittings are installed in a cabinet, the more expensive it becomes.
When filling, the cabinet must be divided into zones using partitions. When installing a classic wardrobe, the main part of the wardrobe is occupied by space for hangers with clothes, a mesh for shoes and open or closed shelves for things. The remaining space is taken up by storage space for household items, for example, a vacuum cleaner, ironing board, buckets, broom, and so on.
You can design a wardrobe using a special program on the Internet or a ruler and pencil on plain paper.
Usually the wall serves as one of the side walls of the built-in closet, so you will need few parts:
Advice. If there is a niche in the hallway, then you can use it to install a built-in wardrobe with your own hands. This option will cost less, since the walls of the niche will serve as the side walls. It is enough to mount the filling with partitions and install the door.
The depth of the shelves is calculated based on door design who is planning to adopt. Some rails allow you to install shelves of maximum depth - just step back a centimeter from the edge. In others, for quality work door leaf it will take almost 10 cm.
Important. If after installing the wardrobe, you plan suspended ceiling, then it is worth providing a mortgage for fastening the profile. Step back a few centimeters from the ceiling, rather than making the door from ceiling to floor. This is very easy to do, just build a U-shaped box from profiles and laminated chipboard and attach it to the ceiling. In this case, the end of the box will serve as a support for the ceiling, and a rail will be installed on the lower part.
In the drawing you need to indicate the size of each individual part, and do not forget that an edge must be applied to each shelf and partition, the thickness of which must be taken into account.
Advice. It is better to order edging immediately after cutting the material from the same company from which the material is purchased and sawed. In addition, it is worth knowing that visible parts are sealed PVC edge 2 mm, and the remaining parts - 0.4 mm. There is no need to cover the joining parts with an edge.
During the design process, you may encounter a problem such as curved wall surfaces.
Often this is not visible visually, but as soon as you start installing the cabinet element to the wall, the unevenness is immediately revealed.
Of course, you can, of course, disguise a gap of several centimeters PVC corner. But we advise you to check the evenness of the walls in advance using a level or rule and carry out the work of leveling the walls.
You should not file chipboard - firstly, without special tool you won’t be able to do it as evenly as possible; secondly, there will be no edge and the cut will open, into which moisture can get in and the material will begin to collapse. It will be difficult to install even a U-shaped plastic profile on a curved cut.
As for the inside, the walls can be painted or trimmed cleaning material, for example, non-woven wallpaper.
Assembly should begin by installing the main walls and forming an opening around the entire perimeter using pre-prepared chipboard strips.
There are two steps to complete:
If reliability is taken as a basis, then simply buy steel corners.
Advice. Modern way fastening parts - furniture euroscrews, but for them you first need to drill holes, but this is very difficult to do by eye. In this case, you will have to buy a special drill.
As soon as the base of the cafe is assembled, they begin installing the partitions, and only then proceed to the shelves.
Special shelf holders made of metal or plastic are used. We list the most common options for mounting shelves:
Once you have decided on the mounting option, you can begin installation. The shelves are installed according to a pre-planned plan.
Important. The shelves should be slightly smaller than the overall depth of the cabinet so that nothing interferes with the closing of the doors. As for closed drawers, it is worth leaving space for handles, that is, they should be 10 cm smaller.
Before starting installation, cut the rod to the required length from the workpiece.
The holders need to be installed not only with screws, but also with glue. To do this, before fastening, apply glue to the inside, apply it to the markings and screw it on.
If we compare the grids with shelves made of chipboard, they are much lighter and create less load on the entire structure.
In addition, mesh shelves for shoes make the design very convenient and ergonomic. The fastenings are very convenient, they several types:
When installing, shoe nets are cut in the middle, as plastic tips are installed on them. The pitch of the shoe rack should be a multiple of 25 mm. The clips are installed in increments of 245 mm.
Often, shoe nets are installed at an angle of 45 degrees for easy storage of shoes and boots.
Assembling and installing doors is the most difficult stage in this design. Save in in this case You can’t do it on the fittings, otherwise the door may jam or fall out.
Usually the wardrobe in the hallway consists of two doors, less often they have three doors. Each door is a canvas, which is framed on 4 sides, made of special aluminum profiles.
It is worth noting right away that the canvas may be heterogeneous, but the material must be compatible. For joining, a connecting profile is used. The door profile is designed for a material thickness of 10 mm.
It is very easy to insert a profile into such a profile, despite the fact that its thickness is only 4 mm; the missing 6 mm are simply supplemented with a silicone seal.
You need to buy a special mirror for doors, with a protective film, so that upon impact it does not shatter into small fragments.
Doors should not be wider than 1 meter because:
You can order doors from a furniture store, or you can assemble them yourself. This is not difficult to do - a frame is put on the canvas and screwed together.
The algorithm of actions is as follows:
To install the door, you must first install it in the far recess of the top track, and then install it in the lower corresponding channel.
The second canvas is installed using the same principle.
After the canvases are installed, you need adjust the rollers so that there is no gap between the canvas and the walls. Apply buffer tape to the handles.
We check the doors - if the movement is free and the rollers do not cling anywhere, then the work on installing the doors can be considered complete.
A few more photos where you can evaluate the result:
The entire process is shown in the video below:
If you want to test your skills, start assembling a wardrobe in the hallway with your own hands. This furniture does not require special design skills and is quite simple to install. The main requirement will be to choose the right color of the structure so that it fits harmoniously into the general interior hallway, cut the material correctly and assemble it efficiently.
In contact with
A mandatory attribute of any hallway is a comfortable, functional closet.
If you have experience performing carpentry work, a piece of furniture can be made with your own hands.
This will help you save money and create a cabinet that will decorate your interior.
Plus, the hallway is the first room that your guests notice. And its main decoration can be your masterpiece!
Before developing a cabinet design, you need to clearly determine what items it is intended for and how many things will be stored. The dimensions of the room are also taken into account.
The main purpose of a wardrobe in the hallway is to store shoes and clothes, hats and even household appliances. Distinguish the following types wardrobes:
For one person or a small family, a one-door wardrobe is enough. The number of sections is two. The internal filling should include shelves for shoes or shoe boxes, drawers for hats and small items wardrobe, hat and umbrella stands. You need hanger bars and hooks for everyday clothes, and a mirror is a must.
When creating a diagram need to be taken into account:
In large hallways there are two-door or three-door wardrobes. They are convenient for storing not only seasonal shoes, hats and accessories, but also bed linen, towels, and magazines. The width of the shelves is variable - from 40 cm or more. The height between them is from 250 to 350 mm.
Important! The greater the depth of the shelves, the longer distance between them and vice versa.
When drawing up a diagram, you need to take measurements of the parts and draw everything on paper.
Reference. There are no specific rules for drawing up diagrams. It is advisable to make a cabinet design using ready-made drawings that are easy to find on the Internet. Or you can draw a sketch of the future product yourself, carefully thinking through all the details.
The material will be cut according to the drawings.
Sequence of circuit development:
It is necessary to mark the ends for gluing furniture edge tape, select accessories. Put all dimensions on the drawing. To make the task easier, you can use the free computer program for design - for example, SweetHome 3D.
According to the selected sizes you need to prepare 6 important details housings:
As side panels, back wall, cabinet bottom and lid apartment walls and floor can be used. This will help save on materials.
Important! If the walls are made of plasterboard, this solution is not acceptable.
The construction market offers a wide range of materials with which it is possible to implement any design solution. It is not necessary to make a cabinet from solid wood. It is expensive and difficult to process. It's better to buy practical ones inexpensive materials, which are easy to work with.
Laminated particle boards – best option for making a piece of furniture with your own hands.
Advantages of chipboard:
Wood boards lightweight, so they do not require fittings or reinforced fasteners. A wide selection of textures will allow you to realize any design ideas.
Plywood sheets durable, lightweight and dimensional stable. The material is several times cheaper than wood.
MDF panels They are an analogue of chipboard, and are inferior to them in fiber pattern and quality. Such furniture is less expensive. MDF with imitation of valuable wood species is available for sale.
Advantages:
Fiberboards have excellent performance characteristics. For the manufacture of load-bearing cabinet structures, medium or high density fiberboard is suitable.
The facade of the sliding wardrobe can be made of wood, glass or sheets of chipboard, MDF. Suitable laminated panels with mirror or normal surface, with tinted car film.
When choosing a material, take into account financial capabilities. If your budget allows, you can make a cabinet from natural wood. Mahogany is the most durable. Alternative options– beech, Karelian birch.
You need to purchase the necessary accessories:
The quantity and type will depend on the number of sections, drawers in the closet.
Important. The fittings must be High Quality so that the doors do not jam.
Before starting work, it is advisable to prepare everything in advance necessary tools and inventory. Namely:
If you plan to cut cabinet blanks at home, you will need an electric jigsaw.
Parts are cut according to ready-made drawings. If you have experience, you can handle this yourself. But after sawing the material with a jigsaw, chips may form.
It is advisable turn to professionals for cutting workpieces. The sheets will be cut beautifully and accurately, and there will be no jagged edges.
After cutting the parts, edging is carried out with furniture PVC tape. The edge is glued using an iron heated to a certain temperature.
Preliminary markings for fasteners are carried out with maximum accuracy.
Important! The holes for the fastening elements must be located strictly in the middle of the thickness of the end of the workpiece, since the confirmations are screwed into the end.
Install the bottom and walls of the cabinet according to the diagram:
Important! A screwdriver will not work to secure the lid. The fasteners are attached manually using pliers. Additionally tighten with a ratchet or hex wrench.
Proceed to installing the side shelves. They are secured with four confirmations (2 on each side).
If the side shelf is flush with the inner shelf or bottom, confirmations cannot be used.
They are fastened with dowels - wooden cylinders. They are inserted into pre-prepared recesses in the wall and pushed into the same holes in the shelf.
Door assembly begins with installation back door. Use a level to check whether the cabinet is aligned accurately. Secure the upper level by placing 2 supports and a running lower profile on it. To assemble the rear door you will need a set of fittings:
If the insertion of glass or mirror is planned, install sections of the seal along the length of the dividing profile. When installing parts made of chipboard, no seal is needed.
When assembling the door, the inserts are placed on foam plastic front side so as not to damage. Glass or mirror is installed in a horizontal dividing profile. When installing two glasses, the seal is placed on both sides.
The combined door is assembled using dividing profiles. A sealant is needed at the joints with the glass. Basic door profile fastened on both sides of the door. If it is made of chipboard, use 4x25 screws. TO connection profile secure with screws using a screwdriver.
Important! One profile is fixed in a horizontal position. The second one is vertical arrangement doors.
The profile handle is installed on both sides, directing the bend to the front side, controlling the tightness of the joints. If necessary, beat with a mallet and the joints are aligned along the entire length. The restrictive sealing corner of the rear door and the running roller without a trunnion are mounted on the handle-profile side.
The rear door is hung on the running profile and moved to the front door. The same set of fittings is prepared as for the back door. The front cabinet door is assembled in the sequence described above.
At the final stage, hangers and baskets are installed on the side walls. Check the functionality of the doors. They should open and close without extraneous sounds and easily.
If you need to decide on the possible design of the final result, we recommend taking a closer look at the following photos:
All stages of the process can be seen in the following video:
Thus, making a hallway cabinet with your own hands is a responsible and painstaking job that is carried out in stages. Select a product design; determine the filling; take measurements, draw up diagrams and drawings; buy materials; make blanks of parts and assemble the cabinet.
In contact with
Anyone can set their teeth on edge when there is a mess in the house, as scattered things have an extremely annoying effect on household members. There is not always space to store property, so many owners solve this problem by installing a wardrobe. Convenient place its placement is in the hallway and bedroom. We suggest you learn how to make a hallway cabinet with your own hands, and to make the process of creating this piece of furniture more understandable, explanatory photos are attached to it.
A sliding wardrobe located in the wall is widely used in homes, as it has an excellent ability to accommodate a sufficient number of things. He takes a small amount of square meters and allows residents to move freely around the house. This cabinet plays a useful role in indoors, and it won’t be difficult to do it.
The most common types of sliding wardrobes can be viewed in the photo. For convenience, many owners place this structure, built into a niche, in the hallway. The main advantage of this building is the minimum cost, since the walls and bottom with a lid are already there and do not need to be built. With the help of a compartment, empty space that has not been used until now is filled.
A great way to install a closet in a hallway is to place it across the entire width of a blank wall. This is the optimal solution, since a cabinet built into the wall in this way will increase the visual volume of the hallway if its doors are decorated. If the house has small dimensions, then this place can be used as a dressing room, while the size of the living space will not decrease.
Sliding wardrobes are often used in zoning one-room apartments. Similar buildings are common in penthouses, since there is no interior doors. This option is the most expensive of the others.
The most common type of cabinet is a separate structure, which can be made into a corner or placed closer to the wall. Such cabinets are created with doors that open on both sides so that access to the contents is as accessible as possible. On the Internet you can find many photos of cabinets and their location in the interior.
Double door wardrobe 
To make a cabinet, you must first choose suitable material, on which the progress of construction as a whole depends. To choose the right material, you need to consider its characteristics. Materials used in the assembly of the sliding wardrobe:
Many companies publish catalogs with photos of all materials. Having made your choice, you can proceed directly to designing the cabinet.
When drawing up a project, the division of the cabinet into zones is carried out using partitions, which are measured by the width of the doors. It is generally accepted that the main place for filling a compartment is the wardrobe area, which includes rods with hangers and shelves for clothes and shoes. The rest of the space belongs to the utility block.
Design can be done using photo samples, or you can prepare it yourself.
Designing a sliding wardrobe using a special program 
Approximate layout of a wardrobe To make a cabinet, you need a number of parts:
You can find many photos with examples of arranging a wardrobe.
Materials for the inner drawer 
Shelf material 
For sliding systems, it is necessary to retreat 9-10 cm from the inside of the door so as not to damage the structure of the cabinet. The exception is the Versailles system, which allows for its installation close to the top rail. But in order to protect the cabinet from undesirable consequences, it is advisable to retreat 1 cm.
You should begin assembling the cabinet by installing load-bearing walls around the perimeter, edging the opening with strips of laminated chipboards. Then you should attach the frame to the ceiling, floor and walls using dowels. The angle helps connect the parts to each other.
Installation of a wardrobe frame 
Installing the wardrobe base The optimal method for fastening parts is the use of Euroscrews, which are used in furniture assembly. But before using them, you first need to make a hole for them, which should be made smoothly without any special devices impossible. For this purpose, there is a specially created drill for confirmation, which can be adjusted to the drilling depth.
If you are fastening to furniture bolts, then for added rigidity and greater retention it is recommended to use furniture dowels. They are screwed in with a hexagon.
Fastening can be done in several ways. Using corners to attach shelves is quite common and not aesthetically pleasing, so it is used in exceptional cases when other methods are completely unsuitable.
By means of confirmations, the shelves are securely attached to the cabinet walls, which guarantees the transfer of various heavy loads. But Euroscrews are used exclusively in places where no one will see them, since their appearance is spoiled due to the caps.
The eccentric allows the shelves to be securely attached to the wall. But in order to attach them, you will have to work hard. In addition, the screw cap becomes noticeable from below. In the photo you can clearly see what these or other mounting options look like.
Shelf mounting option 
Attaching a shelf to a furniture corner The most suitable option For fastening shelves there are shelf holders, which are accessories that provide stability to the part. When using this type of fastening, they are completely invisible on both sides.
Attaching a clothes rail 
Assembling the box The main procedure for assembling sliding wardrobes is sliding doors. When performing the installation, it is not advisable to skimp on auxiliary material, since if it is of poor quality or there is not enough of it, then problems with doors sticking and falling out cannot be avoided. Laguna, Versailles and Aristo have established themselves as the most reliable and high-quality companies manufacturing sliding systems. Their cost is very reasonable.
A sliding wardrobe is often equipped with two, rarely three doors, consisting of a panel framed with aluminum profiles on all sides. For a tight connection in any position, a special profile is used, which allows the frame not to be uniform (an example can be seen in the photo). By standard standards, the thickness of a chipboard sheet is 10 mm.
Using a silicone seal, a mirror or designer glass 4 mm thick can be inserted into such a profile. It is important to know that when using glass or mirrors for a door, you must purchase them with a special protective film, which, due to its elastic properties, does not allow fragments to fly apart during a strong impact. You can assemble the doors yourself or order them ready-made.
It is necessary to hammer the horizontal profiles using a hammer made of rubber. Then you should fill the vertical handles, fastened with self-tapping screws, the dimensions of which are 5 * 30 or 6 * 35 mm. The top and bottom rollers must be installed before the final tie is made. To ensure that the fasteners are not noticeable, the holes for the screws should be made of two different diameters. The first is 9 mm (inside the profile), the second is 5 mm (under the screw leg).
Profiles located vertically and horizontally have differences. The ones that are vertical should have 3 holes, which need to be drilled one at a time in the top and bottom of the assembly, as well as in the place where the lower rollers are attached. Then the profiles need to be sawed off according required sizes and fasten with self-tapping screws. A door stopper is installed in the bottom rail.
Before installing the door, it must be inserted into the far channel of the upper door guide, and then inserted into the lower channel. The second doors need to be installed in the same way. To ensure that there are no gaps between the doors, you need to stick a buffer tape.
Making a wardrobe in the hallway with your own hands is not difficult. All it takes is desire, perseverance and ready materials. After completing the assembly, you can take a photo and show this creation to your friends.
How to do DIY wardrobe in the hallway? The article contains valuable recommendations By self-assembly wardrobe in the hallway and photo.
Self-assembly instructions will tell you about the list necessary tools and materials.
The reader will also learn about simple tips, which will help simplify this process as much as possible, and graphic support in the form of pictures will clearly show how and what to do at each stage of assembling the wardrobe.
In contact with
Classmates
To assemble a wardrobe with your own hands, desire alone is not enough. To do this, you will need the skills of a carpenter and the appropriate power tools:
Every owner has the rest of the tool:
Sketch with wardrobe dimensions
To produce correct measurements, you first need to decide where the wardrobe will be located. For example, in the hallway wardrobes have rectangular shape. Drawings for such a cabinet are made simply: the width and height of the wall are measured. Next, the parameters of the wardrobe are adjusted to these dimensions.
The figure shows that the master sketched out the dimensions not only of the width and height of the cabinet, but also the depth and even the dimensions of the doors. It is worth noting that depth measurements require a small offset of 0.03 mm, which is exactly how much the cabinet doors occupy. In other cases, measurements are entered as shown by the tape measure.
Accessories for wardrobes
With the finished sketch, we head to the building materials store, where the sellers will help you calculate the quantity necessary materials. Order the service of sawing chipboard sheets required sizes so as not to waste a lot of time and effort on manual work.
In this way, blanks for doors, walls and the ceiling of a wardrobe are made. In the same store you can also choose accessories - rollers, rivets, fasteners and corners.
Steel materials are also purchased:
In the process of making a wardrobe, you will also need sandpaper and varnish.
The first step is to level the floor and walls. Special attention This process is given only if you are planning to make a corner wardrobe. The floor can be leveled cement mortar(screed), and the walls in two ways, depending on their unevenness.
If the walls have large differences - from 2 cm or more, then plaster will be needed to level them; in other cases, putty is sufficient.
After complete drying building materials, the working surface is treated with antiseptic compounds. The plastered surface is additionally coated with a primer, and the putty surface is covered with water-based paint.
Helpful advice: The evenness of the walls and corner can be checked using a regular corner or a rule.
Assembling the frame for the wardrobe
The frame is assembled in strict sequence:
Take note: Never try to install the side panels yourself; it is better to do this with an assistant. One person holds the side panels, and the other hooks the corners from the bottom and top of the chipboard sheets. The evenness of the structure is checked by level.
Assembling shelves for a wardrobe
Installation internal elements- this is the most labor-intensive process. It can be roughly divided into two stages:
It is better to choose places for fasteners according to the scheme: 1 element for every 30 centimeters. Thus, even in a small meter-long wardrobe there will be three shelves. The holes for the clamps are made using a drill and a large drill.
It is important to know: In order not to damage a thin sheet of chipboard, stick electrical tape on the drill, measuring exactly 0.3 mm from its beginning, and begin to carefully drill holes to the mark.
Do not forget to measure the distance between the clamps, especially in height, they should be located at the same level. This way the shelves will stand straight and on the same level. All fasteners are attached to glue.
Installation of doors in wardrobes
At the second stage interior work fittings need to be installed. It is installed in two ways: without level checking and with checking. We think there is no need to say which method is better. So, first the fittings are mounted on bottom sheet Chipboard, then onto the side panels. The rollers are secured with special self-tapping screws included in the kit.
Expert advice: To make the screws easier to tighten, drill a small hole in the sheet with a drill. The exposed fittings are not screwed until the entire structure is checked with a level.
After installing the fittings, the doors are mounted as shown in the picture:
After installing the doors, you can begin to assemble the shelves. They are attached to pre-installed clamps. The screw caps can be covered with rubber plugs; they are sold at any hardware store.
Pull-out hanger for wardrobe
On finished design All that remains is to attach the hangers and the wardrobe can be used. It is recommended to install hangers at eye level.
Using a tape measure, the same distance is measured, the place is marked with a pencil directly on the chipboard sheet. Small holes are drilled in the marked places, where hangers are mounted using self-tapping screws.
The cabinet must be polished before painting. sandpaper. To paint the cabinet, it is better to use regular varnish and a brush. The cabinet is painted several times. Recommendation: paint the old coat of varnish only after it has completely dried (after 2-3 days). It is also recommended to open doors and windows after painting to ventilate the room.
Video on how to make a wardrobe with your own hands.
In contact with
See inaccuracies, incomplete or incorrect information? Do you know how to make an article better?
Would you like to suggest photos on the topic for publication?
Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!
Floor: - Walls: - Ceiling: - Wardrobe: -
30-10-2016, 16:04
Target: in a narrow passage and minimal hallway space, place a place to place current clothes, shoes, a small pile of accessories and a mirror for a family of 4 people. And do it as inexpensively and quickly as possible, in short, assemble the wardrobe with your own hands.
Attention: the calculation is made for a separate case. For other cabinet models, the scheme is the same, the only difference is in the costs and amount of material. To visualize and calculate dimensions, it is convenient to use our online wardrobe designer.
Expenses
We're going to Leroy Merlin, we buy components there and cut them as needed. If Leroy is not in your city, you will have to look in local stores.
We do the preliminary assembly of the corner elements. We combine sheets with a width of 350 and 366 mm, as indicated in the figure, and first tighten them with confirmations. It is convenient to do this on an editing table, but in the absence of one, you can also use stools. Here we attach the sectors with 2 confirmata on each side. To ensure an even placement of the confirmations, it is recommended to make preliminary markings. For a wide sheet, one confirmation per sector is sufficient for now. We repeat the procedure on a symmetrical element.
WITH assembled structure remove the wide (side) sheet of chipboard (it will get in the way) and place the half-assembled structures against the wall. This should be done carefully so as not to scratch the ceiling or tear off the sector elements.
Again, more specifically, we assemble the side elements. At this stage, you can attach the entire structure to the floor and ceiling, if you are confident in the accuracy of the markings. Assembling a wardrobe with your own hands does not tolerate mistakes. When fastening, be sure to check the vertical installation
We install a vertical sheet 30 cm wide in the center of the structure. We install rectangular shelves, securing them furniture corners To vertical risers, given that these shelves are installed on the same level with the sector elements, confirmations from the sectors will be hidden.
Now you can finally attach the structure to the walls and ceiling. The structure itself is quite massive and a pair of fasteners for each vertical element is enough - a total of 6 pieces.
We install the guide under the clothes and screw the hooks for clothes. The quantity is optional, but in practice a couple of hooks are enough in the corner, and 3-4 inside half the cabinet.
Cut the guides to the required length. You will need to saw off half of the top one - in connection with one door it is not needed, and it will not physically fit. The top can be secured, the bottom can be simply placed for now, its fastening will come later. Don't forget to put door stoppers in the bottom guide
We install the door in its place. We check that the door fits well into the upper guide and does not fall out of it. To lift the door, you can place a laminated chipboard strip under the bottom guide - sheets 100 mm wide are sold in Leroy. It can be raised to a small height by adjusting the rollers. We control the vertical installation of the door and finally secure the lower guide.
Now you can attach a schlegel and a mirror to the door if desired, install the door in place and use the screws on the lower rollers to adjust its position relative to the cabinet body.
Amazing! So we assembled the wardrobe with our own hands. Over the course of a year of operation, it performed just fine.
