Today, flower beds made from tires can be found on almost every personal plot.
Old car tires are a very popular material among gardeners and this is not surprising, because despite their unsightly appearance, you can make real masterpieces from tires.
In addition, flower beds made from old tires are very functional, which is also important when creating flower arrangements in the country.
If you have the opportunity to choose which tires to make your creations from, then it is best to choose imported tires, which, unlike domestic ones, are made of thinner and more pliable rubber that can be easily cut.
Also, for work it is better to choose “winter” tires, which are much softer than “summer” tires.
Choose a car tire that is already quite worn out and its tread has worn off.
A tire with a worn tread will be much softer, making it easier to turn it inside out.
Before making a flowerbed with your own hands, the car tire should be cleaned of dirt, otherwise your knives or saws will become dull very quickly when you start cutting. And it’s more pleasant to work with a clean product.
By themselves, plain black tires are unlikely to become a decoration for your garden, but if you paint them in bright colorful colors, your flower garden will look new.
Can be painted with any exterior paints.
Drainage should be poured inside the product, and then soil should be filled in. Plants should be planted in spring or early summer as seedlings.
In order for your flowerbed to please the eye not only with a beautifully painted car tire, but also with bright green flowers, you need to select the plants correctly.
As annuals, you can plant matthiola, morning glory, calendula, petunia, nasturtium in such flower beds, and if you want to plant perennials in your garden, viola, daisies, carnations, aubrietta, and loosestrife are suitable for you.
If your flowerbed will stand in one place, then it is better to plant perennials, and if the flowerbed is portable, then planting annual flowers will be appropriate.
If you want to know how to make a garden flowerbed from an old tire with your own hands, then check out possible options registration
The most simple options flower beds from car tires Even a child can do it with his own hands.
You just need to find a couple of old tires, pour soil into it and plant seedlings. We can say the flowerbed is ready.
You can make your flower garden a little more complicated by taking several wheels and installing them on top of each other in several rows. Each tire can be painted in a bright color; multi-colored flower beds look beautiful.
Another simple version of a flower garden can be made with your own hands from car tires of different diameters, which are stacked on top of each other in the form of a pyramid.
The bottom tire should be the largest, and the top should be the smallest. If you don't have a car tire small size, then you can put a pot on top.
You can paint the tires one color, or make them multi-colored, for example, rainbow.
In such flower beds you can plant not only ordinary flowers, but also hanging plants, for example strawberries or petunias.
It will be an excellent solution for small garden, where every meter of land counts. You can see options for vertical flower beds with your own hands in the photo.
A hanging flowerbed is a simple and very effective option that will be appropriate in any country house.
There is no need to cut such a flower bed. You will need a metal chain or a thick cord, which should be secured to a tire and suspended from a tree or any other suitable support.
The bottom of the flower bed should be covered with a piece of rubber or other suitable material.
Or you can simply insert any suitable sized pot inside, which should fit tightly inside the tire.
Using the same principle, you can make a flower bed on legs for your garden with your own hands. To do this, close the bottom of the tire and screw three or four legs to it.
In the photo you see flower beds made of tires on legs and hanging flower beds.
If a flowerbed the height of one car tire does not suit you, then you can make a flowerbed - a cup - with your own hands. To do this, first place a tire with a smaller diameter, and then a larger one on it.
Cut out the sides of the top cover so that they do not interfere with plant growth. If you have a tire large diameter, then you can cut a “saucer” out of it and put it under the bottom of the composition.
Now you need to paint the composition in a traditional tableware pattern, for example, polka dots. The “handle” of the cup can be cut out from the remaining material and attached with wire.
Using the same principle, you can make a teapot; pipe cuttings can act as a “spout”. So at your dacha there will be tea drinking every day.
The video below provides instructions on how to make a flowerbed - a cup.
In order to start making such a flower garden, you will need two wheels. Cut the tread of one wheel into four parts, in the second you need to make four holes into which the tread is inserted and secured with wire.
These will be the animal's paws. The tail is made from a piece of rubber, which is also secured with wire. Next you should take a piece plastic pipe and make a head on it from newspapers and tape.
Opposite the tail, make a hole into which to insert the head. Paint the entire composition in the appropriate color, draw a mouth and eyes. You can attach a Panama hat or a hat to the turtle's head.
This flowerbed made from a car tire looks like a round flowerpot. edge finished product can be cut into the shape of a flower, fringe and much more, depending on your imagination.
For the product, you can take a tire with or without a disc. If the tire has a disc, you will end up with a flowerpot on a leg.
Markings are made on the side using chalk, felt-tip pen or soap.
When considering which edge your flowerpot will have, keep in mind that the size of the petal should not exceed 10 - 12 cm, otherwise it will not take the required shape when turned out.
You can cut a car tire with a very sharp shoe knife. You can make cutting easier by using liquid soap to moisten the knife blade.
Of course, if you have an electric saw or grinder, cutting will be easier and the work will progress faster.
You can see how to cut a flowerpot from a tire with your own hands in the video.
After the petals are formed, you should turn the product inside out. This is the most difficult moment in all the work; it requires a lot of effort.
To turn the product out, turn it up with the side on which the pattern was not cut out, grab the cut out elements on the bottom side with your hands and, stepping on the tread, carefully and slowly turn the tire out.
When half of the tire is turned out, squeeze the product into an oval and it will easily turn out to the end.
The flower garden is almost ready, all that remains is to decorate the product. You can paint a flowerpot with paint of one color, but you can show all your imagination by combining different colors and patterns.
Using pebbles, shells or glass decorative pebbles, you can make the pattern on the flowerpot three-dimensional.
It is better to paint the flowerpot not only outside, but also inside.
This will make the product look more attractive. Such a flower bed at the dacha will decorate even the most unprepossessing area and give it some zest.
The video below shows step-by-step instructions for making a flowerpot from a car tire.
The swan flowerbed can be trimmed according to the same principle as the previous option. The difference is that for the flowerbed there is a swan, a more complex pattern is applied to the tire.
Flower beds made of tires decorated like a swan can be seen in the photo.
Thick and thin wires are used to secure the swan's neck. A frame made of thick wire along the entire neck is secured through small holes with staples made of thin wire.
Now you can color the swan White color, and the eyes and nose are black.
You can watch a video on the topic.
You can make a swan without turning it inside out. Cut the material as shown in the photo. The swan's neck is fixed, as in the first case, with wire and staples.
Swan wings can be cut in different ways. These can be solid wings or wings with cuts of different shapes.
Using the same principle, you can make with your own hands not only a swan, but also other birds, it all depends on what shape you give to the wings and what color you decorate the tire with.
Car tires have long and firmly taken their place among materials garden design. No wonder. For the reliability of vehicles, we use the highest quality tires that are not afraid of aggressive influences environment, it is plastic and durable. Craftsmen We learned how to build entire sports towns, artificial reservoirs from this simple material, and cut out various figures. Car tires are also used to create flower beds. This article will talk about how to unscrew such universal material like a tire for a flower garden to create original flower beds on a leg. Recommendations will be supplemented with a visual video at the end of the text.
To make a flowerpot on a leg, you will need a whole wheel with a disk. Not everyone has a large assortment of used wheels on their site, however, and not all of them are easy to use for this purpose.
For the first trial version It is worth choosing a wheel taking into account the following nuances:
If you don’t find a suitable wheel among the available stocks, you can go to the nearest tire shop, where they will be happy to give away a few of your choice for free. Before starting work, the wheel must be cleaned of dirt and dust. This procedure is necessary not so much for aesthetic reasons, but to ensure that the sand does not dull the instruments.
We take the desired tire and make markings on it
The work of making a flower bed on a leg includes several stages:
To make the pot neat and even, you need to draw lines for future cuts. To do this, you need to lay the tire horizontally and draw zigzag lines from the disc to the periphery. Externally, the design should resemble flower petals. The petals can be made sharp or rounded, thin or thick - in general, to your taste. You just need to take into account that the openwork edge will be important not only for the future bowl, but also for the leg.
You can draw lines with a marker or even chalk. There is a significant drawback when working with chalk: it is easily erased, and it may happen that during the work the markings disappear, and accordingly, inaccuracies in cutting can occur, so it is safer to make the outline with a marker.
The video below demonstrates how to make a flowerbed from a tire:
Many high-quality tires, for reliability of use for their intended purpose, are reinforced with metal reinforcement - metal cord. This metal wire makes the turning process much more difficult. But there is a little trick: you can make cuts with a grinder with outside tires to cut the metal cord, but at the same time maintain the integrity of the future flowerpot. Incisions should be made every ten centimeters.
This procedure should be performed carefully so as not to cut through the rubber. A light color will indicate that the metal cord has been cut. metal dust on the tire, smoke and sparks in the cut area upon contact with the grinder. Having seen these signs, you should not deepen the cut further, so as not to make a hole in the vase, the goal has already been achieved.
The picture shows in detail how to cut and then turn out the tire
The operation of cutting out the flowerpot pattern is carried out with a knife. The knife should be very sharp, then the vase will turn out smooth and neat. The upper part of the wheel must be completely separated from the lower part along the lines of the applied markings. This creates a bowl with a lid. The cover is held on the disk side. The result was a champignon mushroom turned upside down. This is clearly visible in the video.
The main and most labor-intensive process at work. It requires a certain physical preparation and brute male strength. A woman is unlikely to cope with such a task. It is more convenient to do this part of the work together. It is necessary to turn the product over with the cut side down (place the champignon on the stem). Grasp the edge of the tire with a strong object, such as a crowbar or a tire iron, and begin turning the tire inside out.
Raw material for flower beds
At this time, it is necessary to firmly press the wheel disk to the floor. As soon as you manage to turn out a small area, the process will go faster. After half of the tire is turned out, you need to press on the sides of the tire, bringing its shape closer to the oval, this will allow the second half to quickly turn out without additional effort. The video at the end of the article will help you visualize the process. In a global sense, the flowerbed is ready.
A black rubber flower vase has an unpresentable appearance and is unlikely to become a garden decoration. In order for it to become a beautiful flowerbed, you need to paint and decorate it. There is no need to put off painting, since immediately after production the rubber is shiny and clean, which will allow you to decorative finishing smooth and durable.
Before painting, it is necessary to treat the vase with a degreaser. You can choose a universal degreaser or a special one for rubber. Various paints are suitable for applying color: enamels, oil and nitro paints. Car paint will also work. Painting with a spray or can will be more uniform and accurate.
Our raw version of the flower garden can be decorated like this
Professional advice: flower beds made in light colors, look more impressive. But the choice of color and further decoration depend entirely on the imagination of the master and the wishes of the owner of the flowerbed. You can use multi-color painting, as in the video, and also use glass, pieces of ceramics and other materials to decorate such a flower bed.
After the paint has dried, drainage and soil are placed in the flowerpot. That's it, you can plant flowers! Vegetables will also look original in such flowerbeds, thus creating a small impromptu vegetable garden. This technique will allow you to combine business with pleasure, especially on small area. Or, conversely, flowerpots with flowers are easy to fit into a vegetable garden with beds, since the undoubted advantage of such decorations is mobility.
The video clearly demonstrates how to make your own flowerbed from tires, including turning and decorating the finished flowerpot:
To create an expressive appearance, a flowerbed needs a border designed to clearly indicate the boundaries of the structure. An unusual solution in this situation are old car tires, which car owners throw into landfills as unnecessary, simply polluting the environment. A product made with your own hands from a used tire will not only help protect the environment, but will also become a spectacular decoration for a flower bed in your garden plot.
Flower beds made from used tires have many advantages:
The products have no significant disadvantages. But adherents of classicism do not favor them: some demand something more familiar and elegant, others do not want to waste time on making decorative compositions.
The disadvantages include the flammability of the material, but subject to fire safety this fact is immaterial.
To create the simplest flowerbed from an old wheel, you don’t need step-by-step instructions - just pour soil into the tire, and the flowerbed is ready. But even such a trivial thing can be made beautiful, given character and some “flavor” added.
To create an elegant flowerpot from tires, just make leaves or petals of different sizes along the edge:
After marking the pattern, you need to trim the tire for the future flower bed. This is the most time-consuming part of the job. To do this you will need a sharp knife, jigsaw or grinder. It takes a little longer to cut with a knife, but the grinder melts the rubber and adds an unpleasant aroma.
To increase the glide of the knife blade, it can be lubricated during the cutting process. liquid soap. The use of a jigsaw, which allows you to cut even the most complex shapes, will help greatly facilitate the process.
You can get injured when cutting, so be sure to use special gloves and safety glasses. Work better on solid wide surface: a stable table or piece of plywood placed on the ground.
A respirator will save you from the abundance of rubber dust for which Chinese tires are famous.
You need to cut the pattern strictly along the intended line, then the product will turn out smooth and beautiful. The cut out part is not thrown away; it can be used as a base for a stand or a border for a miniature flower garden.
To turn a wheel, you need to lay it cut side down, grab the cut edge and try to turn it inside out. It is important to at least start by manipulating a small part of the tire. Further the process will go easier - each part will carry the next one along with it. This work requires some physical strength, the girls here will have a hard time.
The process of decorating a tire is the most enjoyable stage in manufacturing; it requires preliminary preparation. The surface of the future form is carefully polished to smooth out roughness and other defects. Then the rubber blank is washed to remove fine dirt and dust stuck in the protectors and degreased with solvent or white spirit. Only after this do they start painting.
Paint wheel tires Can:
Using a brush allows you to paint even the most difficult to reach areas on the surface, including the spaces between the protectors. This method is effective, but takes a lot of time. Using a brush, they also create more subtle, elegant patterns, emphasizing the details and shapes of the product.
The sprayer guarantees uniform distribution of the dye. The advantage of this coloring is the absence of drips and brush marks. The paint consumption in this case is slightly higher than in the previous version.
It is most convenient to do this with a spray can, but this method is the most expensive.
Enamel, oil or nitro paints are used as coloring solutions. The paint is applied not only to the outside, but also to the top 10-15 cm inner surface. It is better to use a layer of white as a primer and only after that apply a colored layer: this way the finishing color will be brighter and more even.
After painting, you need to dry the workpiece in the sun for several days.
When painting tires, you should follow several rules:
Color palette is selected according to design concept garden:
The shape can be left monochromatic or a pattern can be applied using a stencil, decorated with a stripe or a pattern that imitates brickwork, checkerboard - the variety of ornaments provides enormous opportunities and scope for the flight of imagination of landscape designers.
Regardless of the location of the structure, a flowerbed made from an old wheel always looks impressive and attracts attention. Fancy figures from tires can be made to decorate the yard, placing them in the front garden at the entrance or on the playground; they look good in the courtyard of a private house or in the country.
Flowerbeds are installed directly on the ground or on special stands, hung on walls and trees as flowerpots, and made into pyramids and other complex structures.
If there is a strong fence or a blank wall near the house, you can arrange a flower garden on them by hanging tires on cables or chains. The space inside is filled with earth, and suitable flowering plants are planted. Holes are made in the rubber so that there is somewhere for drainage excess water. The bottom of the flowerpot is covered with drainage - small pebbles and sand are enough.
This version of the flower bed is relevant for verandas or gazebo walls.
There are a lot of original ideas on how to make your own flowerbed from old tires. All that is enough for you creative imagination in creating a flower garden has the right to exist.
The main thing in landscape design personal plot- arrange everything in the same style:
Flowerbed in the form ladybug or a cup of coffee, funny Minions or the Leaning Tower of Pisa - nothing is impossible for flexible rubber material.
If the space of your personal plot allows, you can make a flower bed in the shape of a flower. The design requires 4 tires, 3 of which must be cut crosswise into two parts - they will become the petals of the future chamomile. The whole tire will be the center of the flower, around which you need to lay the petals.
The tires are dug into the ground 5-6 cm. First, all blanks are painted in bright positive shades. Petals can be in one color scheme, and alternate between each other in 2-3 colors.
An extraordinary addition to the pattern can be glued glass pebbles; on a flower-shaped flowerbed, such decorative elements will resemble frozen drops of dew, which will greatly enliven the design.
Even those who do not have special artistic skills and rich imagination can construct such a flower garden. A well made from tires does not require much time and special costs, but will look impressive in landscape design.
Such a decorative object will harmoniously complement cozy atmosphere courtyard of a private house, and the bright design of the structure will emphasize the beauty of garden flowers.
For the design you will need three old tires of the same size. In each of them, slots are made on opposite sides with a sharp knife in order to subsequently insert support posts for the roof. The poles can also be installed with outside tires, which makes the work much easier.
Very often, gardeners accumulate things at their summer cottage that are a pity to throw away, and it is not clear what to do with them so that they serve a second life. However, it’s worth imagining a little, and the garden plot will be decorated with beautiful flower beds made from tires and other available materials. And old tires that have already served their useful life can help in decorating flower beds.
About how from old automobiles rubber tires do beautiful flower beds How to paint them will be discussed below.
Old car tires after prolonged use they will become soft and easier to shape into the desired shape. You can ask your neighbors for tires - motorists who do not need them. You can also pick up used car tires at service stations, since they would otherwise simply be thrown into a landfill. And if you have the opportunity to choose between domestic and imported tires, then it is better to make flower beds from imported tires. Because tires from foreign manufacturers are much softer, so it’s easier for them to give different shapes, turn them inside out, etc.
Dirty tires should first be cleaned of as much dirt and sand as possible. After all, with pure material and it’s more pleasant to work with, and the blades of the knives will become dull faster when working with tires dirty with mud and sand.
Before making a flowerpot or flowerpot from an old tire, you should carefully consider its appearance: in the shape of a bowl, which will have smooth edges, a flowerbed, whose edges will be cut off by waves, or a vase in the shape of a flower with petals and fringe.
You can come up with any shape for tires, but it usually always comes in the form of a “pan-lid”: the bottom of such a flower bed will be deep, and the top must be cut off. The contours of the cut can be easily drawn with ordinary chalk.
If from old tire The owners decided to make a flower bed in the shape of a flower, then along the edge of the product they should draw the contours of the petals with chalk, and then cut along the contour with a sharp knife. Each petal should not be more than 12 cm. If the petals are made larger, it will be impossible to turn the tire out, and the shape of the flowerbed will be uneven.
When the tire is cut along the contour, then the tires need to be cut along the grooves in the longitudinal direction (the distance between such cuts is up to 10 cm).
In order to create a flowerpot from a tire on a leg, first turn the tire inside out. Many gardeners don't get this right the first time. In fact, it is not easy to turn a tire out this way.
Metal cord is usually cut with a grinder in several places. This saw cuts rubber smoothly. Cuts are made across the entire surface of the tire at an equal distance from each other (about 15 cm). And only then can you start turning the tire out. It should be remembered that it is difficult to turn out only the first piece of the tire; then it will be much easier to turn out the product.
Any tool used to cut car tires must be well sharpened. Old tires can be cut with a shoe knife. To facilitate the cutting process, the blade of such a knife is lubricated with liquid soap.
It’s great if you can use a jigsaw to cut coatings. Using this tool, you can cut out various shapes and crafts from wheels.
To cut metal discs, you need to use a saw – a grinder.
Tires can be cut in different ways, depending on the shape of the future flower bed. You can cut the tires in half, or cut them off only top part.
However, it is not enough to give an old tire unusual shape. After all, black or dirty gray flowerpots look ugly against the general background of the garden plot. Therefore, it is necessary to paint the outer part of the flowerpots, which were made from wheeled ramps.
To paint these rubber products, use any type of paint:
If the outer part of the tires is clean, then the paint will lie evenly on it, and will last on the tires for more than one season. Can be used to decorate flowerpots car paint.
Craftsmen use it for painting works aerosol cans of paint. In this case, you can paint all the prepared flower beds from car tires in a short period of time. It is better to use light shades of paint when painting tires - in this case, the soil inside the tires heats up less.
Most often, gardeners paint only the outer part of the tires. However, it is much more aesthetically pleasing to paint the tire on the inside (at least its upper part).
There can be a great variety of design options for flower beds made from car tires - it all depends on the imagination of the owners and the availability of different paint colors.
You can combine different colors and shades. Moreover, you can paint the lower part of the flowerbed with a darker paint, and the upper part with a lighter one. You can apply an ornament of a different shade to the main color. However, do not try too hard when painting the tires - when the flowers grow, they can completely cover the outer part of the flowerbed.
Some craftsmen do not stop only at painting such flower beds - they can stick glass pebbles onto the petals of tires, creating the effect of dew.
The right combination flowers when painting flower beds from car tires, which is “consonant” with the color scheme of plants planted in such flower beds, will give the garden plot a unique flavor.
When decorating flower beds with car tires, you shouldn’t hold back your imagination. After all, from old tires you can build not only flower beds, but... Tires can be used in manufacturing garden swing, armchairs and ottomans, various decorations for garden plots, hedges and much more.
If the garden plot is small, then it is more appropriate to place flower beds made of car tires, carved in the shape of a frog, a beautiful swan, a carriage from a fairy tale, a bright firebird or an exotic parrot. But on a large lawn, flower beds made in several tiers or structures made vertically will look better.
Slides made from waste tires look original. The height of such slides depends only on the imagination of the site owners. Small slides made from several tires look beautiful, installed in a checkerboard pattern on top of each other. Moreover, in each of these tires you can plant various varieties colors.
The size of such slides, both in width and length, and in height, depends only on the imagination of flower growers and the size of the area allocated for such flower beds.
You can paint tires in such a flower garden either the same way or by combining shades.
Plant in flower beds made from car tires better flowers, which will delight you with their blooms all season long. Flowers planted in a tire garden are usually unpretentious.
Moreover, you can plant flowering plants of different heights and shades of flowers. You can use climbing flowers.
These can be the following plants:
Free space between flowering plants can be supplemented with fir cones - this decoration looks interesting, but next year such cones have to be replaced with fresh ones.
Combining different kinds and varieties of flowers, you can create unusually beautiful compositions in flower beds from old car tires. It all depends only on what colors the gardener wants to see on his site.
Old car tires can be perfectly used to improve general interior garden plot. Most often they are used specifically for decorating flower beds or flower beds. And here everything depends only on the imagination of the owners - and there are a great many options for flower beds from old tires.
Almost every summer resident strives to decorate his plot in the most interesting way. Various varieties of flowers and plants are used, original ideas landscape design. And for this it is not at all necessary to use expensive materials and spend a lot of time. You can decorate the area with your own hands using available materials. For example, with the help of tires, you can stylishly and very funly diversify an empty space.
For many years, summer residents and gardeners have been using car tires as decoration for their gardens. This method of decoration has many advantages:
Do beautiful flower bed Making car tires with your own hands is simple and profitable, you just need to put in a little effort. At the same time, it is important to follow the sequence and recommendations when performing such decorative element. Below you can explore step by step instructions for making garden decorations from car wheels.
The first step, of course, is to choose the idea and shape of your decoration. And there are many ideas - in the form of a flower, a well, a tea cup and much more. When determining the final option, be guided by your taste and the characteristics of the garden.
Of course, the ability to choose is always a plus. Therefore, it is better to select products with the greatest tread wear because... the worn-out tread layer softens the tires and makes them more suitable for making fancy shapes.
If you are faced with a choice - old car tires of Russian or foreign production, then it is better to choose latest version. The thing is that they have thinner, softer rubber, from which it is more convenient to make figures.
And if you have to choose between winter or summer car tires, it is better to choose winter tires.
To draw the cut line, you need to determine what shape you want to make - a flower with sharp or smooth edges, a large bowl, a vase with wavy lines, or even a swan. It is advisable to apply the outline with a felt-tip pen or chalk.
The photo below shows an example of a contour:
Note! If you just want to beautifully color the tires for the flower garden, then you do not need to draw cut lines or cut them out.
To cut a beautiful flower bed out of tires, it is important to do everything carefully. This will help not only to obtain a non-standard product, but also to avoid injury. It is advisable to use a sharp knife or jigsaw if you have one. In the video below you can see how the cutting stage goes.
Video: how to make a flowerbed from a tire using a knife in 5 minutes.
Video: how to cut and turn out a tire using a jigsaw.
The final step in making a flowerbed from old tires with your own hands is the design, because black tires in the garden will look depressing and not aesthetically pleasing.
To paint old car tires for flower beds, it is recommended to use enamel, oil, nitro paints, as well as car paint. Their advantages include long-lasting coverage and ease of application.
There are absolutely no boundaries when decorating a product: you can use only one color or combine several of your favorite colors. It's not trivial to do beautiful drawings, ornament.
Video: flower beds made from tires and tires that you can make at your dacha with your own hands.
A flower bed made from a car tire in the form of a flower bed - perfect solution for those who want to achieve a feeling of rustic coziness in their area. In addition, the well will highlight the beauty of your flowers.
Instructions on how to make a flowerbed in the form of a well from rubber tires:
Below you will find photos of a flower bed in the form of a tire well for inspiration and ideas:
The turtle tire design is truly very beautiful. Thanks to interesting looking she can literally revive any summer cottage and make it a little fabulous.
Tea cups made from rubber tires will look original in any garden. To make them yourself, just follow the simple step-by-step instructions:
Video: flower beds made of tires and tires in the form of tea cups
It is clay frogs that very often decorate summer cottages. Green beauties fit perfectly into the garden setting. But frogs made from rubber tires will also look extraordinary.
Look how cute the cheerful little frogs look!
Birds of paradise flamingos now have the opportunity to live not only in exotic lands, but also in your garden! All you need to do is stock up on tires and pink paint. Look at the photos below to see what beautiful birds you can make from car tires:
Video: how to make a flamingo from car tires.
Dangerous predators in nature can become cute animals made from tires at your dacha. Green structures will look organic next to flowers, shrubs, and trees.
In fact, there are a lot of ideas for creating decorations from tires for the garden and summer cottages. You can get inspired already ready-made ideas or come up with something of your own, very original and unforgettable. Therefore, we invite you to look at the photographs from various options for inspiration and new ideas:
Beautiful designs from old car tires will add to your garden, garden and summer cottage unique charm. They will not only delight you every time, but will also pleasantly surprise your guests.
In contact with