The adhesive qualities of some materials have been known to man since the Stone Age and are actively used in various spheres of life. Until the twentieth century, the basis for their production was natural ingredients. But the rapid leap of science became a breakthrough in the development of synthetic substances. This affected all production and construction sectors, both in our country and abroad.
Glue Titan - professional product based on polyurethane, having successful experience use in Russia and the European Union in combination with thermal insulation systems, which is confirmed by numerous certificates. The scope of its application is the widest range of non-inert coatings.
Titanium universal adhesive is suitable for durable connection of materials with each other and in various variations, it specifications promote gluing of products to surfaces made of concrete, gypsum, plaster, cement-lime coating. Using this product, thermal insulation is attached when installing façade and internal insulation, sealing expansion joints.
Ceiling finishing procedure foam tiles has its own characteristics. Among the parameters under which the adhesive joint hardens, the following can be distinguished.
What adhesive composition is best to use for interior decoration? The choice of product is usually influenced by the assortment in the nearest store. Titanium foam polyurethane adhesive for polystyrene foam is the most popular representative of this category in retail sales. Its versatility even extends to plastic, metal and glass materials.
High viscosity allows you to hold ceiling elements without additional fixation. Unlike other analogues, it does not have a sharp persistent odor, due to which ceiling cladding activities do not need to be accompanied by increased ventilation. As you know, in the process of ventilating a room, drafts and sudden temperature fluctuations are undesirable, as they can negatively affect the quality of the work performed.
According to reviews, the glue dries completely in a few hours, which reduces the risk of elements moving or peeling off.
When purchasing a product other than Titan glue, you should pay attention to the instructions for use. Foam and polystyrene foam materials must be included in the compatibility list. After all, many drugs contain solvents that can corrode and deform plastic. IN in this case It is better to choose Titanium for tiles. This is especially true when thin panels are used for cladding: the seams are often visible when the electric lighting is turned on.
In addition to the choice of adhesive, it is important to pay attention to the technique of performing the work, since to a large extent it influences the final result. When using Titan glue, when gluing the panels, you need to press them to the base, then remove them, wait a minute and press them again to the ceiling. This method will allow the preparation to dry slightly and thicken, and the panel will be fixed more firmly.
It is recommended to remove loose plaster and whitewash before starting work. For these purposes, you can use a metal spatula. Whitewash wetted with water from an aerosol peels off better, and the level of dust in the room is reduced significantly. Best option- stripping the ceiling down to the concrete base.
However, if you prime the plaster and whitewash deeply, then ceiling glue Titan Stiro 753 will hold tiles perfectly even on multi-layer slabs. According to the instructions, polystyrene should be fixed by applying the product not in local spots, but by treating the panel over the entire area, since the small thickness causes the risk of deformation.
For thin finishing elements, you should choose white Titanium foam glue. How to make tiling hide imperfections on surfaces? It is better to start pasting the ceiling from the edge to which the gaze is directed when entering the room. It is in this corner that deviations from parallelism to the walls will become especially noticeable. If the room has irregular shape, then the panels must be mounted diagonally from the middle (chandelier). In this case, the volume of waste increases slightly, but visual perception finishing is improving.
Sometimes the ceiling has significant differences in height, which is why tiling will only highlight the defects rather than mask them. Then it is more advisable to opt for suspended frames and stretch ceilings.
Modern technologies make it possible to create glue for different needs and specific applications. Titan glue stands out from other manufacturers.
Popular with both ordinary customers and professional builders. A large number of positive feedback and excellent technical characteristics allow it to occupy a leading position in construction market among similar products.
Glue Titan- This is a good universal glue. Used in construction, repairs and in everyday life. Has exceptional adhesion to most materials. The adhesive composition is suitable for durable connection of dissimilar materials. It has proven itself when working with ceiling tiles made of polystyrene foam and expanded polystyrene.
Universal, and most importantly, high-quality glue will help to reliably glue materials such as: ceramics, linoleum, artificial and Genuine Leather, glass, paper, wood, parquet, PVC panels. In addition, “Titanium” is used to secure decorative elements, for example, from gypsum.
Considering the specifics of different types of adhesive products of this brand, Titan glue has good performance operational characteristics. It works great in conditions high humidity and with significant temperature changes, without loss of quality level or reduction in adhesive ability.
Unlike other analogues, Titan does not become brittle after hardening. If we look at the composition of the glue in detail, there are no harmful components, which makes this product safe to use and further use during construction/repair of housing.
The very concept of “technical characteristics” at its core is a certain set of physical, chemical and other properties of a product, which makes it possible to distinguish and distinguish similar products from each other. Based on this definition, we can distinguish following features glue "Titan":
The Titan adhesive composition is produced in the following forms:
This type is ideal for working with parquet, wood, linoleum, polystyrene foam and PVC panels. After the glue hardens (as a rule, this process lasts no more than one hour), an almost invisible, transparent seam will remain at the gluing site. For best result It is necessary that the surface is prepared for application, that is, it is dry and completely clean. A special dispenser will allow you to apply the glue in a thin, neat layer.
It will be useful if you need to glue, for example, concrete and cement, drywall and wooden panels, brick and plaster. Glue mastic will help level and prepare the work surface. This type of Titan glue is frost-resistant and is ready to work even in difficult climatic conditions.
Created specifically for reliable and convenient gluing of metal, ceramics, polyurethane, wood and other materials. It is produced in a tube for use with a mounting gun.
An important feature and difference between Titan wallpaper glue and many other similar products is the presence of antiseptic components that will prevent mold and mildew from appearing. The adhesive is produced in the form of a dry powder, which will be completely ready for use after adding required quantity water.
The adhesive composition is excellent for fastening different types of bricks, foam and gas silicate blocks and other mineral substrates. The manufacturer emphasizes that when working, you should follow temperature regime and do not use Titan adhesive foam at – 10° C and below.
On the packaging of each type of product, the buyer will find instructions for use with detailed instructions on what the Titan universal adhesive glues, as well as how to use it correctly and effectively.
For installation of wood, foam plastic, leatherette, PVC and many other finishing materials to concrete, cement or gypsum base Titan glue is used. It has excellent technical characteristics and provides durable, reliable connection surfaces.
Options for using glue They are varied and therefore allow you to significantly save money. One package of such material can replace many other means required for repair and construction.
In some cases, when the repair is already completed, you can see minor defects in the form of a loose corner of a tile, linoleum or wallpaper. All these shortcomings will be eliminated by glue Tytan because it is highly efficient.
"Titan" does not lose glue quality characteristics, even if it is used when different temperatures environment. The composition is characterized by resistance to direct sun rays, excellent elasticity. After gaining strength, it does not become brittle and is not prone to delamination. Environmentally friendly, does not contain harmful human body substances.
Glue properties:
Titan glue is available in several types, each of which has a different purpose.
Universal. It is moisture and heat resistant, forms a transparent adhesive seam, which becomes invisible after drying. Used for gluing parquet, polystyrene foam, PVC, wood.
It is squeezed out of a hermetically sealed package in a thin layer through a special dispenser. Apply to a previously cleaned, dry surface. Dries in 40 minutes, maximum adhesion strength is achieved after 24 hours.
All of the listed properties make the Titan universal adhesive an indispensable tool for installing ceiling tiles. Apply the compound to the tile in a thin, broken line, let it dry for a few minutes and press it to the ceiling.
Designed for gluing polyurethane and expanded polystyrene. Can be used to level surfaces and.
Excellent bonding to concrete, brick, wood, fiberboard and chipboard substrates, as well as plastered and cement-lime surfaces. The listed materials are glued together in any variations.
Advice! Be sure to stir the mastic before use.
Apply to the surface dotted with a spatula and apply to the base. Within three seconds the position can be adjusted. The adhesive mastic sets within 20 seconds and dries completely in 12 hours.
The glue is a paste white with high setting speed and excellent elasticity. Effectively fastens steel, ceramics, polyurethane, mirrors, wood and PVC; it can be used indoors and outdoors at ambient temperatures from -30 to +60° C. Sold in cylinders that have fastenings for a mounting gun.
Liquid nails are applied in a thick layer over the entire surface. This feature allows you to glue Decoration Materials on ceilings with significant defects.
For wallpaper. The glue comes in powder form, which must be dissolved in water before use. The mixture contains antiseptics that prevent the appearance and development of fungus and mold. Using Titan glue you can install any wallpaper.
It is characterized by high adhesion to mineral substrates, productivity and efficiency. It is used for laying foam and gas silicate blocks, foam and gas silicate, ceramic and silicate bricks.
Maximum adhesion occurs after 120 minutes; if glue obtained from a dry mixture is used - after 24-36 hours. The composition can be worked at an ambient temperature not lower than -10° C.
The packaging of each type must contain instructions for using the adhesive mixture.
The technical characteristics of the glue determine its wide range of applications. The Titan Wild composition glues parquet, glass, ceramics, paper, wood, linoleum, as well as natural and artificial leather. Ideal for attaching foam and polystyrene foam. The universal composition allows you to glue dissimilar materials.
If the glue has become too thick, it can be diluted with medical alcohol. The liquid consistency allows for better penetration into small cracks, but this glue takes longer to dry.
The cost of glue varies depending on the volume of packaging and variety:
Are you looking for a universal adhesive that is suitable for almost all materials? Pay attention to Titan glue. Thanks to its excellent adhesion, the product is used to work on fresh air and inside any premises. It interacts with a huge number various materials, leaving behind an even, stable seam. The active ingredients are completely environmentally friendly and have no pungent odor.
Titan adhesive consists of vinyl acetate copolymers, which are dissolved in organic solvents. Available in plastic bottles with capacities from 250 ml to 1 liter. The volume may be larger for industrial applications. The product is used only on specially prepared dry and clean surfaces. Shelf life – up to 1.5 years.
"Titan" is an adhesive with a good set of positive properties:
The composition of the product does not include substances hazardous to human health.
Precautionary measures
When working with construction adhesive, you should be careful and avoid getting it on mucous membranes and the body. If the product accidentally gets into your eyes or mouth, rinse them immediately running water, and if necessary, apply for medical care. In the room where repair work is carried out, there must be ventilation. The glue should only be stored in a place that is difficult for children to reach.
One package of such a product will replace many types of glue, simplify and speed up repair work. Before applying glue, the surface must be thoroughly cleaned and dried. If the surface is porous, apply several layers of the product.
Be sure to free the ceiling or walls from old whitewash and apply a layer of primer, otherwise the properties of the adhesive will change.
For ceiling tiles, “Titanium” is consumed in smaller quantities; it is applied with a dotted line. The ceiling must be cleaned of dirt and degreased. The tiles are connected to each other after the glue dries a little for 2-5 minutes. It takes a little less than an hour for the construction adhesive to dry completely. The work will be completely ready in a day. After use and complete drying of the product, a transparent, even seam remains, which is almost invisible. Easy to use and quick results make the glue ideal option for this kind of work.
Purchasing universal glue will great savings budget, because there is a use for it in any home. The surface coupling area is highly resistant to frost, wind, water and other atmospheric influences. Often during repair work They buy separately a product for gluing tiles, linoleum, and expanded polystyrene, but Titan Wild glue and its other varieties solve all problems at once.
Assembly adhesive It is convenient and easy to use. The product comes in a sealed package, and to open it you only need to turn the cap once. To easily apply the product with one click, it has a dispenser with which the glue is squeezed out in a thin strip into any hard-to-reach place.
In the production of the adhesive composition, all features are taken into account external influence onto the glued surface. Any temperature changes, exposure to direct sunlight and moisture have no effect on Titan glue. Weather conditions do not affect the technical characteristics of the product.
The product is suitable for construction work, as well as for domestic purposes. The glue works with almost any material, including wood, paper and glass. He does a great job with plastic products, linoleum, laminate and parquet board, easily glues any fabric. It is convenient to apply to concrete and cement surfaces. The product is available in several types of packaging.
If necessary, the product can be diluted with denatured alcohol or ethyl alcohol. If the glue has thickened, a small amount of alcohol will improve its consistency, it will penetrate into the cracks better, but it will take longer to dry completely.
The polymer product is available in different forms depending on its purpose.
TYTAN assembly adhesive is made from synthetic resins and is suitable for gluing various mirrors on any surface. The advantage of the product is that it does not harm the fragile and sensitive mirror and works reliably with many materials. The glue has beige color, its shelf life is one year.
Titan Wild glue is resistant to high and low temperatures. The product is suitable for all non-inert materials, therefore it is used almost everywhere.
For gluing foam plastic, there is a special type of glue that is used for thermal insulation work. The composition is easy to use, sets quickly, and does not require additional dilution. Works well with polyurethane boards and other thermal insulation materials. The product simplifies the work and glues the slabs extremely firmly.
Titan foam also helps to insulate any room, which comes in a package with a reliable modern valve. The foam is in a cylinder and is used to fill various joints, insulate facades and roofs. Modern packaging helps to significantly reduce material consumption.
Eco-friendly glue Tytan special purpose For ceramic materials and the stone sets very quickly. This type is used for gluing to wood, drywall, and other surfaces that quickly absorb glue.
The product is popular because it can be found in almost any hardware store. The product is also sold in the hardware departments of supermarkets, shops and markets. The cost of glue starts from 60 rubles and reaches 350 rubles, depending on the volume and type.
The main advantages of the Titan line are the resistance of the compositions to moisture and changes weather conditions, high strength, and quick effect. The versatility of the product allows it to be used not only during repair and construction work, but also for domestic purposes. Titan glue is available in different types, all the nuances of use are explained in detail by the instructions, so everyone can choose effective remedy for your needs.
Polymers instead of bones and tendons. These are not new body prosthetics. We're talking about glue. In the Neolithic era, that is, the late Stone Age, it was cooked from bones and veins. Looking at modern jellied meat, it’s easy to believe that they can make glue.
Later, plant resins began to be added to bonding mixtures. Glue based on them and animal fat was found in the tomb of Tutankhamun. The substance was poured into a vessel, apparently suggesting a need for it in the afterlife.
This indicates the importance of the glue. Its modern variations are mainly polymer. Such glue is not placed in tombs, but it still means a lot. What are the names alone worth? Today's review will be dedicated to Titan. That was the name of the Greek gods. According to legend, they held the sky on their shoulders. And what does it hold? glue "Titan"?
The basis of Titan glue is polyurethane. Its constituents isocynate and polyol are taken from crude oil. The synthesis was carried out in the 1930s in America. In the 1950s, polymerization of the substance was carried out there. The result was foamed varieties of polyurethane, for example, polystyrene. The abundance of air in it allows you to insulate houses with the material.
Polystyrene is solid. Titan glue contains liquid polyurethane. The product looks like PVA. “Titan” is packaged in different cylinders, bags and bottles, depending on the purpose. We'll talk about it in a separate chapter.
In addition to polyurethane, Titan may contain dimethyl ether, propylene, 4-4-diphenylmethane, their isomers and homologues. This is the name given to substances of a similar composition, but of a different structure. In the case of homologues there are additional CH 2 groups.
The exact composition and proportions of the components give variations in the structure and appearance of the Titan. It is not always white like PVA. There are transparent types of glue. There is even a semblance of polyurethane foam. The differences from it are the absence of secondary expansion.
By giving it, the polyurethane foam also gives shrinkage. “Titan”, having expanded once, does not change its volume. In addition, the glue has better adhesion to concrete. Adhesion is the ability to penetrate into the upper layers of other materials and adhere to them.
Assembly adhesive "Titan"- a brand under which a number of products are hidden. It covers various construction and renovation needs. There are 4 main types of glue:
A narrower classification of “Titanium” is related to application. So, among the wallpaper powders there are those for paper, vinyl, and fabric. TO liquid nails applies glue "Titan" for mirrors. But there is also universal formulations. They are even used as. To do this, denatured alcohol is added to the glue - ethanol with an admixture of methanol.
The brand's product line includes ceiling adhesive "Titan". It belongs to the category of mastics, good for tiles made of gypsum, polystyrene foam, polystyrene foam. All instructions on the packages are in Russian. The brand, by the way, is also domestic. Entered the market in the 1990s.
Properties of Titan glue depend on its type. In the form of foam, for example, the composition ignores ultraviolet radiation. Regular polyurethane foam it darkens and makes you fragile. “Titanium” is used in street work. If foam is also covered with other “facades,” it is only for the sake of beauty, and not for the safety of the sealant.
In a can of foam glue "Titan" transparent, but the output becomes cloudier. As the mixture hardens, it becomes light beige. Gas bubbles are enclosed in closed honeycombs. They don't communicate with each other.
Therefore, Titan foam is resistant to moisture. This makes the material suitable for facade works. For internal ones, Titan is also ideal because it does not contain freon. These are gases in which methane is mixed with ethane.
They talk about the dangers of the mixture. However, it is not itself that is harmful, but the tetrafluoroethylene released. It is formed at temperatures above 400 degrees. That is, foams with freons are potentially dangerous only in case of fire.
However, during it the poisons will find something to stand out from. Emphasis on the absence of freons in Titan glue - more marketing ploy, how real advantage.
Are common characteristics of Titan glue in foam and in mastic form – heat resistance. When frozen, the product can withstand at least 140 degrees. The wallpaper series cannot boast of sim.
But Titan powder adhesives have specific advantages. The first of them is slipperiness. It allows you to move the canvas on the wall, adjusting the pattern on the wallpaper. To make them easier to glue, Titan powder dissolves in water without forming lumps. This is the second advantage of mixtures. They dry in 5 minutes.
Question, What glue "Titan" glues has dozens of answers. Even artificial leather is sealed with brand mixtures. Therefore, the use of “Titan” is widespread. If the ancient Greek Gods held the heavens on their shoulders, then the hero of the article bears the responsibility for repairs and the sphere of arts and crafts.
Floor and ceiling blocks are attached to the Titan. Under ceramics, the hero of the article replaces cement mixture. Titan also works well under moldings and baseboards. Double-glazed windows, slopes for them, and door frames are mounted on adhesive foam.
The low consumption of the mixture encourages replacing competitors with Titan. On square meter wallpaper, for example, takes 1 liter. However, on some surfaces all 20 liters are spent per square.
The exact indicator depends on the porosity of the base. Glue "Titan Wild" fills the voids. This is extra volume. On a flat and dense surface, the consumption of mixtures is several times less.
Application of the hero of the article, like others adhesive compositions, there is a risk of the mixture getting on clothes, floors, and furniture. The outfits are sorted out after waiting for the “Titan” to harden.
In its solid form, it is covered with gauze and tapped. It breaks like glass. All that remains is to shake off the fragments and wash away any stuck in the fibers of the fabric. fine particles warm water with soap.
When removing mixtures from home surfaces and facades, the question arises: How to dilute Titan glue. Suitable: alcohol, disinfectant liquids with it and denatured alcohol. On packages of solvents you should look for “butyl acetate” and “isoprapanol”. They are even in nail polish remover. So, it will also help get rid of glue stains.
For 4 parts of “Titanium” take 1 part of the solvent. Therefore, acetone is suitable for cleaning surfaces, but it is risky to use it to dilute a thickened mixture.
Titan glue price depends on the type and volume of the mixture. Half a liter of universal, for example, costs from 100 to 220 rubles. They charge from 210 to 370 per liter. Is it worth paying? Customer reviews will tell you about this:
Angelica EL
This characterizes domestic glue as a solid average. It is accessible, reliable, although not cutting-edge. But the quality of the brand’s products is constant, and the instructions for them are clear.
