Platbands made of galvanized steel coated with a layer polymer coating, are becoming increasingly popular in the construction of housing and non-residential buildings. This type of shaped elements is intended for upholstery with outside window and doorways. The EuroMet website presents high-quality fittings and platbands, which you can buy at an affordable price wholesale and retail.
Metal frames for windows and doors in various colors:
Steel additional elements are ideally combined with metal siding. The building is designed in uniform style, looks harmonious and elegant.
Finishing strips for edging window and door openings are made of plastic and wood. However, metal products have a number of advantages compared to analogues made from other materials:
The peculiarity of the platbands is the individual production of four strips strictly in accordance with the dimensions of the opening. Instead of the lower part, a low tide can be installed. Installation is carried out on site.
The company produces shaped elements from high-quality galvanized steel with a thickness of 0.5–0.7 mm. Metal products are protected from exposure to adverse natural conditions several layers of coating:
Platbands are made of domestically produced steel. Product quality meets standards and specifications.
If you are looking for where to buy ready-made window frames, contact EuroMet. We will produce facade elements in the shortest possible time and offer additional accessories for fastening.
Korovin Sergey Dmitrievich
Master of Architecture, graduated from Samara State University of Architecture and Civil Engineering. 11 years of experience in design and construction.
Metal-plastic windows are a multifunctional modern glazing product window openings. The final stage of installation plastic windows is the finishing of external slopes. For this, various finishing materials can be used: plaster, paint, PVC panels, drywall, but most often metal finish windows Installing a metal slope on windows can be done with your own hands.
Finishing windows on the outside with metal slopes performs decorative and protective functions. By installing slopes on windows with your own hands, you can close the installation seam and thereby protect it from exposure to precipitation and direct sunlight.
Metal slopes perform a protective and decorative role
Polyurethane foam, used to seal the joint between the frame and the window opening, is a porous, vapor-permeable substance that allows moisture from the room to pass through it. As a result, moisture and condensation settle on the surface of the window slopes, which leads to the formation of mold and destruction of the integrity of the structure. Moisture from the street can penetrate through the mounting seam and cause fogging and freezing of the window in winter.
By installing metal slopes on windows, you don’t have to worry about these troubles, since metal is a strong, durable and easy-to-maintain material with high performance indicators.
Metal external slopes perform several important functions:
The customer can choose any color of the slopes from the RAL catalog
Metal window trim should be installed immediately after the windows are installed to prevent moisture from being absorbed by the foam. If this cannot be done in the near future due to façade finishing work, then assembly seams Windows can be temporarily covered with polyethylene.
There are several types of finishing materials, using which you can give the window opening a complete appearance. These are plaster, drywall, plastic and paint. But in their own way technical specifications none of these materials can compare with metal slopes. When deciding how to make slopes, you need to study the characteristics of finishing materials.
The polymer layer of the steel slope protects the product from rust
When using plaster, you must be prepared for the fact that the plaster layer will crack over time. Moisture getting into the gaps between the window frame and the plaster layer can cause mold to appear.
Drywall as finishing material for slopes only suitable for interior work. Even GVLV brand drywall is not able to withstand the direct effects of precipitation. Behind short term it will swell, lose its appearance and collapse.
Application plastic panels for finishing external slopes, the plastic fades in the sun and acquires an unpleasant yellowish tint. And with a sharp drop in air temperature, the plastic becomes fragile and may lose its integrity after a slight mechanical impact. Therefore, it is better to use plastic for finishing internal slopes, especially in the kitchen area.
Metal slopes are not exposed to weather conditions
The advantages of metal slopes are obvious, since the material for their production is galvanized steel, which is covered with a protective polymer decorative layer at the production stage.. This protects products from corrosion and rust.
Despite the fact that external metal slopes are more expensive than other types of finishing, they positive traits This shortcoming is more than covered by:
Metal slopes covered with a layer of galvanized steel
It is recommended to install noise-absorbing tape along with the slopes
Among the disadvantages we can note high cost and the presence of sound effects arising from drops or hail falling on their surface. This can be dealt with if you use a special noise-absorbing sealing tape when installing metal slopes.
Another disadvantage of a metal slope is the impossibility of installing it in arched openings.
Installing modern metal slopes on windows with your own hands will require the preparation of special materials and tools for this type of work:
Surplus polyurethane foam needs to be cut
Surface preparation involves removing construction dust and contaminants from it. Excess polyurethane foam is cut off with a painting knife, and seams and joints are processed using silicone sealant. Do-it-yourself installation of a metal slope on windows should be done after the seams have dried.
Installation of metal slopes on windows involves carrying out measuring work. The width and height of the product will correspond to the internal and external parameters of the opening. Manufacturing of top, bottom and side metal elements made by cutting them from a prepared metal sheet in accordance with the measurements obtained.
Scheme for trimming a metal slope 
Scheme for trimming the lower metal ebb 
Scheme for trimming the upper metal ebb
At the second stage of work, the ebb tide is installed, the horizontal position of which is controlled building level. The lower junction of the wall and window frame equipped with special thermal insulation material and diffusion tape for noise reduction and moisture protection.
First you need to install the tide
When attaching the ebb, mounting foam is applied to the window opening and to the ebb with inside. To prevent it from bending due to the expansion of the foam, it is pressed tightly for a while. After the ebb is fixed, the installation of metal slopes begins.
Before installing metal slopes, it is necessary to treat the places where they will come into contact with the window frame with sealant.
Metal slopes are secured with polyurethane foam
First, the side elements are installed, maintaining the required slope from the inside to the outside. The upper and lower parts are adjusted using a knife depending on the level of inclination.
The side elements must be installed in a vertical position and tightened with screws. Top part adjusts to the side elements. It aligns relative to external corners and secured with self-tapping screws.
At the final stage, all contact areas are treated with sealant.
When installing slopes on a façade made of corrugated sheets, use horizontal lintels
If the façade of the house is covered with corrugated sheets, it is necessary to use horizontal lintels when finishing window openings. These are side shelves made of corrugated sheets, which are attached to the wall on one side and to a metal profile on the other. Steel trims give the façade completeness.
Since ancient times, people have been decorating their homes. The buildings from the old era are still preserved. There, the presence of platbands was a mandatory attribute. He pointed to the wealth of the residents who lived in it. This decoration of the house gave it status. Nowadays, platbands are used both for decoration and to perform some useful functions.
Nowadays, the popularity of window frames is gaining momentum. It's becoming fashionable. But not everyone knows that platbands serve as good protection against freezing of the seams between the window opening and the window frame in winter.
Platbands are made from different materials. Consider an option made of iron.
Iron platbands, along with wooden ones, are distinguished by their durable properties. They tolerate moisture and natural factors well. Of course, they are susceptible to corrosion, but if you follow the painting technology, you can achieve the maximum effect of counteracting external natural factors.
Creating metal trim is a real art. For manufacturing we will need a set of tools and consumables:
Before you start creating platbands, it is worth making slopes. They are also made of metal. Take measurements of the slopes, taking into account the protruding edges. Based on the dimensions obtained, we create a template for future platbands. You should make two parts of the platbands. Side and top with bottom.
You should fold a sheet of paper in half and then apply a drawing. This will simplify the task and you will get two identical drawings.
When moving on to working on metal, you need to prepare a place for cutting it so that it is convenient for you. You can use two identical tables. Place them side by side, with a small distance for working with a jigsaw.
Let's start cutting:
Now the platbands are ready. All that remains is to mount them to the windows.
Installation depends on the materials from which the house is built. Can be secured with nails or self-tapping screws wooden house. The dowel should be secured with nails or anchors on brick houses.
Metal trims are ready!
Creating metal trims is labor-intensive work. She will be rewarded with a new transformed look for your home. Give positive emotions to you and passersby.
Platbands are necessary not only for decorating a window, giving the facade a designer look that allows you to bring any ideas to life, but also provide decorative protection for seams from freezing and negative impact natural phenomena. Metal trim is a high-quality, reliable material that can protect well window seams, make them airtight and decorate the window itself.
Many have seen ancient wooden buildings decorated with carved platbands on the outside. Such decorations are made by hand and can have a rather complex design that turns a boring house into a work of art. You can create a piece of a fairy tale using metal window frames. Any patterns can also be carved on them, but, unlike wood, metal is more reliable and practical material, able to withstand any load.
If wooden crafts They do not tolerate moisture well, require constant care and are not very durable, then metal analogues are free of these disadvantages. It is enough to use stainless metal or paint the product regularly. Metal window frames can completely replace wooden elements. You can cut out the desired pattern yourself using flat metal sheets, and, unlike working with wood, you do not need to have carving skills or special tools.
It is much easier to work with metal sheets: they will not require drying, special conditions for this, and will not require the use of varnish, which fades in the sun, which is why you have to constantly renew it. After installation, metal platbands will not require additional maintenance and will fit perfectly into the design of the facade. Installation of metal slopes will also not cause any difficulties.
For beauty and aesthetics they install plastic corners on the windows. Find out what they are from our material.
The thickness of a suitable iron sheet is between 0.40 and 0.70 mm. Such sheets are produced at factories in rolls up to 50 meters long. The width of the product is 1.25 m; the sheets do not always need to be painted, since you can buy an already painted product of the color and shade you need. To ensure that the material does not receive damage during transportation, it is protected from scratches. special film, which can be removed if necessary. The metal is quite strong and flexible, so it does not cause difficulties when working with it.
To work you will need:
Before proceeding to the manufacture of platbands, you need to install metal slopes on the windows . White metal would be a good option. You will need to measure the slopes to find out their exact size. In addition, you need to take into account the protruding edges: you need to calculate the length and width of the platbands based on these data. Typically the length is 35 cm with the addition of the width of the trim.
Once the size is obtained, you can make templates for the trim. For this you will need whatman paper, you can use wallpaper. You need to make two templates - a long one for the side of the window and a shorter one for the top and bottom if the windows have a size close to the standard one.
The sketch is drawn on a sheet of paper folded in half. The center of the pattern should be on the fold. You don't need to cut out the design twice: using this method, you will get two identical templates without extra effort, and the templates themselves will be perfectly smooth.
It is more convenient to make carved metal window frames at a previously prepared workplace. This will require two tables of the same size and height. You need to leave a distance of 8 cm between them so that the jigsaw can maneuver. Most often, metal of two colors is used to make platbands: the top sheet can be white, and the bottom sheet, which will act as a background lining, can be any.
Once the façade trims for the windows are ready, you can proceed to their installation. It will not take much time and can be completed without the involvement of specialists. The installation method depends on what materials the walls are made of: if they are wooden, you will need the following:
The platband must be fitted tightly to the slope so that it does not protrude beyond its limits, and secured to the wall. If there are uneven places or gaps remain, they need to be coated with silicone sealant. After this, paint all the heads of the screws and nails with a small brush: this will rid the structure of unsightly dark spots.
Details on how to restore a wooden window, give it the new kind, read the article “How to repair and paint a wooden window” on our website.
Decorating windows in a wooden house requires a special approach. Read how to choose a material for covering windows in a wooden house.
Slopes are not always mounted on wooden structure– sometimes owners want to make it more decorative brick house. You can also use metal slopes for this. The construction of metal slopes in this case is no different, but the use of nails will have to be abandoned.
Before installation, you will need to drill holes for dowels in the walls. It is advisable to use materials at least 6 cm long, otherwise there will be a risk of the structure falling out of the wall. After the holes are ready, you need to insert plastic blanks into them. Holes for screws are also pre-drilled in the mounted slopes: make sure that all holes strictly coincide.
After everything is ready, the structure is put in place and screwed. Working with cracks occurs in a similar way. You can use silicone sealant: a colorless one will be most convenient, since you won’t have to select its shade, but if both the wall and slopes are white, you can use white. It is not recommended to use polyurethane foam. It cannot withstand moisture and requires protection from weather conditions and has an unattractive appearance.
Which of us, seeing beautiful, old people in front of us, log houses, decorated with intricately carved openwork platbands, with rich kokoshniks carved like a royal crown on the roofs, did not admire the fabulous beauty that has come down to us from the depths of centuries. But seeing such beauty and admiring it is one thing. But turning your home into a fairy-tale palace is not an easy task.
And the point is not even that someone lacks the skills of an artist or lacks imagination in constructing twisted patterns, the problem is the fragility of external wooden elements and designs. Unfortunately, wooden frames and the carving elements retain their original appearance for many years, only in indoor, dry rooms. In an external humid environment, wood quickly warps, cracks and chips, especially in places with fine carvings. The external environment, sun and rain quickly destroy paint coatings, forcing you to spend extra money on paint and repaint everything every two or three years.
Despite some difficulties that may seem at first glance, you should not give up the desire to turn your drab house into a little mansion. Abundance of materials in construction stores allows you to replace the tree with a more durable material. In this master class you will learn how to make carved frames on the windows with your own hands, replacing the wood with flat iron.
Flat iron, or flat sheet, as it is correctly called according to the factory classification, is thin sheet metal (thickness 0.40-0.70 mm), which comes from the factory in rolls of 20, 30 and 50 meters. The standard factory width of sheets in rolls is 1 meter 25 centimeters. Flat iron is painted different colors, from white to dark chocolate. All iron sheets are covered with a protective film to protect them from scratches during transportation.
To make carved window frames we will need:
When starting to manufacture window casings, it is necessary to prepare and install slopes on the windows in advance. One option is white iron slopes.
After we manufacture and install the slopes, we take the exact size from the window, taking into account the edges of the slopes protruding onto the walls. When the size is taken, we calculate the width and length of the platbands. Standard width 30-35 centimeters, the length of the window plus the width of the casing.
Having taken all the measurements, we make templates for the platbands from any smooth roll of wallpaper. Having chosen a sample drawing, we prepare two templates. One long side and one short for the bottom and top of the window. Fold the cut strip of paper in half and draw a sketch so that the center of the pattern is at the fold. When the design is cut out, its second half will automatically be ready, so you will get the correct, even template.
Let's prepare workplace, for this we place two tables of the same height, next to each other in length, leaving a gap of 7-8 cm between the tables, this is a place to work electric jigsaw. Platbands are made of two colors of metal (the simplest option). The top overlay color will be white, and patterns are cut out on it. The second color of your choice is the background lining under the top carved sheet.
We take a sheet of flat iron and cut strips for the trim of the required width.
We turn the blanks of the upper overlay part of the platband face down, and on reverse side Having secured the template with paper clips, we translate the openwork pattern of the platband.
When the drawing is ready, take an electric drill, insert an 8 mm drill and drill through holes along the edges of the drawing for a jigsaw file and begin cutting out the casing.
We cut out the frames for the iron windows.
We place the strip of iron on the table so that the part to be cut out is in the center of the table, and begin to cut out the design along the contour.
Having cut out the upper part, we proceed to making the lower, background part of the casing. To do this, we also cut the sheet of iron into strips of the size we need, taking into account the edging. The width of this sheet should be 4-5 centimeters wider.
Turn the sheet face up. We place the finished top blank of the casing on it face down. We trace the outer edge along the edge of the design 4-5 cm wide and begin cutting.
Having prepared both pieces, remove them from protective film and put them on top of each other.
We fix them with paper clips and make 1-2 holes with a 3-4 millimeter drill. Making it riveted manual machine control coupling so that the parts do not come apart. After that, we drill and rivet the entire structure. The window casing is ready.
After the platbands are made, we begin their installation on the wall; here you will need a ladder or stepladder.
When installing platbands on wooden wall you will need:
When installing platbands on stone walls, we will need:
Platbands are adjusted close to the edges of the protruding window slopes and are attached to the wall.
Then all cracks and uneven places are coated with mounting silicone. And the heads of nails or screws are painted with a thin brush with paint matching the color of the platband. The work is ready, the carved frames are installed on the windows.
Which of us, seeing before us beautiful, old, log houses, decorated with intricately carved openwork platbands, with rich kokoshniks carved like a royal crown on the roofs, did not admire the fabulous beauty that has come down to us from the depths of centuries. But seeing such beauty and admiring it is one thing. But turning your home into a fairy-tale palace is not an easy task.
And the point is not even that someone lacks artistic skills or lacks imagination in constructing twisted patterns, the problem is the fragility of external wooden elements and structures. Unfortunately, wooden platbands and carving elements retain their original appearance for many years, only in indoor, dry rooms. In an external humid environment, wood quickly warps, cracks and chips, especially in places with fine carvings. The external environment, sun and rain quickly destroy paintwork, forcing you to spend extra money on paint and repaint everything every two or three years.
Despite some difficulties that may seem at first glance, you should not give up the desire to turn your drab house into a little mansion. The abundance of materials in hardware stores allows you to replace wood with a more durable material. In this master class you will learn how to make carved window frames with your own hands by replacing wood with flat iron.
Flat iron, or flat sheet, as it is correctly called according to the factory classification, is thin tin (0.40-0.70 mm thick), which comes from the factory in rolls of 20, 30 and 50 meters. The standard factory width of sheets in rolls is 1 meter 25 centimeters. Flat iron is painted in different colors, from white to dark chocolate. All iron sheets are covered with a protective film to protect them from scratches during transportation.
To make carved window frames we will need:
When starting to manufacture window casings, it is necessary to make and install slopes on the windows in advance. One option is white iron slopes.
After we manufacture and install the slopes, we take the exact size from the window, taking into account the edges of the slopes protruding onto the walls. When the size is taken, we calculate the width and length of the platbands. The standard width is 30-35 centimeters, the length of the window plus the width of the casing.
Having taken all the measurements, we make templates for the platbands from any smooth roll of wallpaper. Having chosen a sample drawing, we prepare two templates. One long side and one short for the bottom and top of the window. Fold the cut strip of paper in half and draw a sketch so that the center of the pattern is at the fold. When the design is cut out, its second half will automatically be ready, so you will get the correct, even template.
We prepare the workplace, for this we place two tables of the same height, next to each other in length, leaving a gap of 7-8 cm between the tables, this is the place to work with an electric jigsaw. Platbands are made of two colors of metal (the simplest option). The top overlay color will be white, and patterns are cut out on it. The second color of your choice is the background lining under the top carved sheet.
We take a sheet of flat iron and cut strips for the trim of the required width.
We turn the blanks of the upper overlay part of the platband face down, and securing the template with paper clips to the reverse side, we transfer the openwork pattern of the platband.
When the drawing is ready, take an electric drill, insert an 8 mm drill and drill through holes along the edges of the drawing for a jigsaw file and begin cutting out the casing.
We cut out the frames for the iron windows.
We place the strip of iron on the table so that the part to be cut is in the center of the table, and begin to cut out the design along the contour.
Having cut out the upper part, we proceed to making the lower, background part of the casing. To do this, we also cut the sheet of iron into strips of the size we need, taking into account the edging. The width of this sheet should be 4-5 centimeters wider.
Turn the sheet face up. We place the finished top blank of the casing on it face down. We trace the outer edge along the edge of the design 4-5 cm wide and begin cutting.
Having prepared both pieces, remove the protective film from them and place them on top of each other.
We fix them with paper clips and make 1-2 holes with a 3-4 millimeter drill. Using a manual riveting machine, we make a control coupling so that the parts do not come apart. After that, we drill and rivet the entire structure. The window casing is ready.
After the platbands are made, we begin their installation on the wall; here you will need a ladder or stepladder.
When installing platbands on a wooden wall you will need:
When installing platbands on stone walls, we will need:
The trims are fitted close to the edges of the protruding window slopes and attached to the wall.
Then all cracks and uneven places are coated with mounting silicone. And the heads of nails or screws are painted with a thin brush with paint matching the color of the platband. The work is ready, the carved frames are installed on the windows.
Today, many companies offer to buy window frames in Moscow. They can be purchased in a standard version, or can be ordered individually. Of course, the cost of the product will increase, but they will maximally satisfy the needs of customers. The market offers to buy window casings made of wood, but the demand for them in Moscow is gradually decreasing. This is due to the high cost of the material, as well as the increasing popularity metal-plastic windows. Products made from PVC, a material that is easier to care for, are inexpensive. Affordable prices and for metal trim on windows.
The sale of platbands for plastic windows is breaking all records. Here are their advantages:
It’s very easy to buy window trims in Moscow, and it’s just as easy to install them. Mounted plastic products on adhesive composition behind a short time. There is also the opportunity to order inexpensively, where you can hide the wiring. If the house is finished with vinyl or metal siding, then you will need special plastic trims for windows, the price of which is slightly higher than usual. From simple models They feature a carefully thought-out installation system. A higher cost is for non-standard profiles, for example, carved ones.
Metal trims for windows - good choice! This finish is practical and durable, beautiful and affordable. And carved window frames, the price of which will be slightly higher than the cost of standard models, will allow you to create a unique look for any home. They are made from thin-leaved non-ferrous metal and decorated in any color scheme. It is preferable to buy windows rather than PVC ones: they have the same advantages, plus they have additional benefits. For example, they do not burn and are resistant to mechanical damage. The only drawback is that their installation will take longer and be a little more complicated, so it is better to contact specialists. Also, craftsmen need to correctly measure the openings, because if plastic is easy to fit to the right sizes on the spot, then cutting a metal profile at home is quite difficult.
It is up to the buyer to decide which product to choose, having carefully studied all the pros and cons.
Metal-plastic windows are a multifunctional modern product for glazing window openings. The final stage of installing plastic windows is finishing the external slopes. For this, various finishing materials can be used: plaster, paint, PVC panels, plasterboard, but most often metal window trim is produced. Installing a metal slope on windows can be done with your own hands.
Finishing windows on the outside with metal slopes performs decorative and protective functions. By installing slopes on windows with your own hands, you can close the installation seam and thereby protect it from exposure to precipitation and direct sunlight.
Metal slopes perform a protective and decorative role
Polyurethane foam, used to seal the joint between the frame and the window opening, is a porous, vapor-permeable substance that allows moisture from the room to pass through it. As a result, moisture and condensation settle on the surface of the window slopes, which leads to the formation of mold and destruction of the integrity of the structure. Moisture from the street can penetrate through the mounting seam and cause fogging and freezing of the window in winter.
By installing metal slopes on windows, you don’t have to worry about these troubles, since metal is a strong, durable and easy-to-maintain material with high performance indicators.
Metal external slopes perform several important functions:
Metal window trim should be installed immediately after the windows are installed to prevent moisture from being absorbed by the foam. If this cannot be done in the near future due to work on finishing the facade, then the installation seams on the windows can be temporarily covered with polyethylene.
There are several types of finishing materials, using which you can give the window opening a complete appearance. These are plaster, drywall, plastic and paint. But in terms of its technical characteristics, none of these materials can compare with metal slopes. When deciding how to make slopes, you need to study the characteristics of finishing materials.
The polymer layer of the steel slope protects the product from rust When using plaster, you must be prepared for the fact that the plaster layer will crack over time. Moisture getting into the gaps between the window frame and the plaster layer can cause mold to appear.
Drywall as a finishing material for slopes is only suitable for interior work. Even GVLV brand drywall is not able to withstand the direct effects of precipitation. In a short time it will swell, lose its appearance and collapse.
The use of plastic panels for finishing external slopes leads to the fact that in the sun the plastic fades and acquires an unpleasant yellowish tint. And with a sharp drop in air temperature, the plastic becomes brittle and may lose its integrity after minor mechanical stress. Therefore, it is better to use plastic for finishing internal slopes, especially in the kitchen.
Metal slopes are not exposed to weather conditions The advantages of metal slopes are obvious, since the material for their production is galvanized steel, which is covered with a protective polymer decorative layer at the production stage.. This protects products from corrosion and rust.
Despite the fact that external metal slopes are more expensive than other types of finishing, their positive qualities more than make up for this drawback:
It is recommended to install noise-absorbing tape along with the slopes Among the disadvantages, we can note the high cost and the presence of sound effects arising from the fall of drops or hail on their surface. This can be dealt with if you use a special noise-absorbing sealing tape when installing metal slopes.
Another disadvantage of a metal slope is the impossibility of installing it in arched openings.
Installing modern metal slopes on windows with your own hands will require the preparation of special materials and tools for this type of work:
Excess polyurethane foam must be cut off Surface preparation involves removing construction dust and contaminants from it. Excess polyurethane foam is cut off with a painting knife, and the seams and joints are treated with silicone sealant. Do-it-yourself installation of a metal slope on windows should be done after the seams have dried.
Installation of metal slopes on windows involves carrying out measuring work. The width and height of the product will correspond to the internal and external parameters of the opening. The manufacture of the top, bottom and side metal elements is carried out by cutting them from a prepared metal sheet in accordance with the measurements obtained.
At the second stage of work, the installation of a low tide takes place, the horizontal position of which is controlled by the building level. The lower junction of the wall and the window frame is equipped with a special heat-insulating material and diffusion tape for noise reduction and moisture protection.
First you need to install the tide When attaching the ebb, mounting foam is applied to the window opening and to the ebb from the inside. To prevent it from bending due to the expansion of the foam, it is pressed tightly for a while. After the ebb is fixed, the installation of metal slopes begins.
Before installing metal slopes, it is necessary to treat the places where they will come into contact with the window frame with sealant.
Metal slopes are secured with polyurethane foam First, the side elements are installed, maintaining the required slope from the inside to the outside. The upper and lower parts are adjusted using a knife depending on the level of inclination.
The side elements must be installed in a vertical position and tightened with screws. The upper part is adjusted to the side elements. It is aligned with the outer corners and secured with self-tapping screws.
At the final stage, all contact areas are treated with sealant.
When installing slopes on a façade made of corrugated sheets, use horizontal lintels If the façade of the house is covered with corrugated sheets, it is necessary to use horizontal lintels when finishing window openings. These are side shelves made of corrugated sheets, which are attached to the wall on one side and to a metal profile on the other. Steel trims give the façade completeness.
