Stairs. Entry group. Materials. Doors. Locks. Design

When choosing washbasins, buyers focus on appearance and the shape of the product, method of fastening, material of manufacture. But the presence of a pedestal plays an important role.

Washbasin dimensions

If you need a high-quality washbasin with a pedestal, immediately check the dimensions of both the washbasin itself and the stand. The parameters are written in the order: height-length-width. That is, the pedestal for a porcelain washbasin can be specified in the standard size 640x215x200. This means that in front of you is a washbasin pedestal with a height of 640 mm, and its length and width are 215 and 200 mm, respectively.

High-quality plumbing in a wide variety and optimal prices presented on the specialized website of the Kolo company in the catalog at the link: http://www.kolo.ua/%D0%BF%D1%80%D0%BE%D0%B4%D1%83%D0%BA%D1%82% D1%8B/umyivalniki-i-pedestalyi/pedestalyi-i-polupedestalyi/ .

Washbasin width

If you want your bathroom to look harmonious, all plumbing fixtures should be selected according to style and size. When choosing sinks, for example, you should focus on the width of the product. Modern washbasins with pedestals are presented in the range from 35 to 100 cm. If we talk about corner options, they indicate only one side of the product, which is located along the wall. The universal width is 55-65 cm.

If the room is small, people sometimes sacrifice the width of the sink. As a result, the products are less than 50 cm. Practice shows that this is inconvenient to use. Water splashes outside the sink. Models wider than 65 cm are suitable for spacious baths.

Washbasin height

This parameter is sometimes used to indicate the depth of the sink bowl. The normal value is from 13.5 to 15 cm. The deeper the sink bowl, the less splashes go beyond its limits.

For men best option washbasin heights from 94 to 110 cm; for women, from 81 to 92 cm. In general, a value from 86 to 93 cm is considered optimal.

Washbasin depth

This parameter determines the distance from the edge of the washbasin to the wall. As a rule, the depth of a comfortable wash should be at least 48 cm and no more than 61 cm. You can check whether the sink will suit you even without a tape measure. It is enough to stand close to the washbasin and stretch your arms over it. If back wall ends at the level of the fingertips, or in the middle of the palm, the product fits perfectly. You can buy it without hesitation or doubt.

It will not be difficult to choose a high-quality washbasin for the bathroom, following the tips described above.

Home > Abstract

Semi-porcelain and porcelain pedestals for washbasins with dimensions 640x215x200, 670-630x240-180 - installation work is carried out taking into account the requirements of SNiP 3.01.01-85* "Organization construction production", SNiP 12-03-2001 "Occupational safety in construction" SNiP III-4-80* "Safety in construction", SNiP 3.05.01-85 (1988, amended 1 2000) "Internal sanitary systems" , GOST 13449-82 "Sanitary ceramic products. Test methods", GOST 30493-96 "Sanitary ceramic products types and main dimensions", "SNiP 2.04.01-85*" Internal water supply and sewerage of buildings"SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP III-4-80*, SNiP 3.05.01-85 (1988, amended 1 2000), GOST 13449-82, GOST 30493 -96,"SNiP 2.04.01-85* Installation of toilets with a cistern directly connected - installation work is carried out taking into account the requirements of SNiP 3.01.01-85* "Organization of construction production", SNiP 12-03-2001 "Labor safety in construction" SNiP III-4-80* "Safety in construction", SNiP 3.05.01-85 (1988, amended 1 2000) "Internal sanitary systems", GOST 13449-82 "Sanitary ceramic products. Test methods", GOST 30493-96 "Sanitary ceramic products types and main dimensions", "SNiP 2.04.01-85* "Internal water supply and sewerage of buildings" SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP III-4-80 *, SNiP 3.05.01-85 (1988, amended 1 2000), GOST 13449-82, GOST 30493-96, SNiP 2.04.01-85* Installation of small cast iron and steel shower trays - installation work is carried out taking into account requirements of SNiP 3.01.01-85* "Organization of construction production", SNiP 12-03-2001 "Labor safety in construction" SNiP III-4-80* "Safety in construction", SNiP 3.05.01-85 (1988, from change 1 2000) "Internal sanitary systems", GOST 13449-82 "Sanitary ceramic products. Test methods", GOST 30493-96 "Sanitary ceramic products types and main dimensions", "SNiP 2.04.01-85* "Internal water supply and sewerage of buildings "SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP III-4-80*, SNiP 3.05.01-85 (1988, amended 1 2000), GOST 13449-82, GOST 30493- 96,"SNiP 2.04.01-85* Installation of faucets for bathtubs and trays. Faucets for shower installations with a shower net on a flexible hose - installation work is carried out taking into account the requirements of SNiP 3.01.01-85* "Organization of construction production", SNiP 12-03-2001 "Occupational safety in construction" SNiP III-4-80* "Safety in construction", SNiP 3.05.01-85 (1988, amended 1 2000) "Internal sanitary systems", GOST 13449-82 "Sanitary ceramic products. Test methods", GOST 30493-96 "Sanitary products ceramic types and main dimensions", "SNiP 2.04.01-85* "Internal water supply and sewerage of buildings" SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP III-4-80*, SNiP 3.05.01- 85 (1988, amended 1 2000), GOST 13449-82, GOST 30493-96, SNiP 2.04.01-85* Installation of ladders with a diameter of 100 mm - installation work is carried out taking into account the requirements of SNiP 3.01.01-85* "Organization construction production", SNiP 12-03-2001 "Labor safety in construction" SNiP III-4-80* "Safety in construction", SNiP 3. 05.01-85 (1988, amended 1 2000) "Internal sanitary systems", GOST 13449-82 "Sanitary ceramic products. Test methods", GOST 30493-96 "Sanitary ceramic products types and main dimensions", "SNiP 2.04 .01-85* "Internal water supply and sewerage of buildings" SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP III-4-80*, SNiP 3.05.01-85 (1988, amended 1 2000) , GOST 13449-82, GOST 30493-96, "SNiP 2.04.01-85* Laying sewerage pipelines from polyethylene pipes high density with a diameter of 50 mm - work is carried out taking into account the requirements of SNiP 3.01.01-85* "Organization of construction production", SNiP 12-03-2001 "Labor safety in construction" SNiP III-4-80* "Safety in construction", SNiP 3.05.01-85 (1988, amended 1 2000) "Internal sanitary systems", GOST 22689.2-89 "Polyethylene sewer pipes and fittings for them." SNiP 2.04.01-85* "Internal water supply and sewerage buildings "SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP III-4-80*, SNiP 3.05.01-85 (1988, amended 1 2000), GOST 22689.2-89, SNiP 2.04.01 -85* Laying sewerage pipelines from high-density polyethylene pipes with a diameter of 100 mm - work is carried out taking into account the requirements of SNiP 3.01.01-85* "Organization of construction production", SNiP 12-03-2001 "Labor safety in construction" SNiP III-4- 80* “Safety in construction”, SNiP 3.05.01-85 (1988, amended 1 2000) “Internal sanitary systems”, GOST 22689.2-89 “Polyethylene sewer pipes and fittings for them. "SNiP 2.04.01-85* "Internal water supply and sewerage of buildings" SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP III-4-80*, SNiP 3.05.01-85 (1988, as amended. 1 2000), GOST 22689.2-89, SNiP 2.04.01-85* Laying sewerage pipelines from pressure polyethylene pipes low pressure medium type with an outer diameter of 110 mm* at the outlet - work is carried out taking into account the requirements of SNiP 3.01.01-85* "Organization of construction production", SNiP 12-03-2001 "Occupational safety in construction" SNiP III-4-80* "Safety in construction", SNiP 3.05.01-85 (1988, as amended 1 2000) "Internal sanitary systems", GOST 22689.2-89 "Polyethylene sewer pipes and fittings for them. "SNiP 2.04.01-85* " Internal water supply and sewerage of buildings "SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP III-4-80*, SNiP 3.05.01-85 (1988, amended 1 2000), GOST 22689.2-89, SNiP 2.04.01-85* Laying heating and water supply pipelines from steel electric-welded pipes with a diameter of 100 mm * case - work is carried out taking into account the requirements of SNiP 2.04.05-91* "Heating, ventilation and air conditioning", SNiP 3.01.01-85* "Organization construction production", SNiP 12-03-2001 "Labor safety in construction" SNiP III-4-80* "Safety in construction", GOST 10704-91 "Straight-seam electric-welded steel pipes. GOST 5264-80 "Manual arc welding. Welded connections. Main types, structural elements and dimensions." SNiP 2.04.05-91*, SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP III-4-80*, GOST 10704-91, GOST 5264-80 Laying heating and water supply pipelines from steel electric-welded pipes with a diameter of 150 mm * case - work is carried out taking into account the requirements of SNiP 2.04.01-85 * "Internal water supply and sewerage of buildings", SNiP 3.01.01-85 * "Organization of construction production", SNiP 12-03-2001 "Safety" labor in construction" SNiP III-4-80* "Safety in construction", GOST 10704-91 "Long-seam electric-welded steel pipes. GOST 5264-80 "Manual arc welding. Welded joints. Basic types, structural elements and dimensions." SNiP 2.04.05-91*, SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP III-4-80*, GOST 10704-91, GOST 5264-80 Section 2. Construction work Manual excavation of soil in trenches up to 2 m deep without fastenings with slopes, soil group 2 - work is carried out taking into account the requirements of SNiP 3.02.01-87 “Earth structures, foundations and foundations”, SNiP 3.01.01-85* “Organization of construction production "; SNiP 12-03-2001 "Occupational safety in construction", SNiP 2.04.01-85* "Internal water supply and sewerage of buildings" SNiP 3.02.01-87, SNiP 3.01.01-85*, SNiP 12-03-2001 Manual filling trenches, openings of pits and pits, soil group 2 - work is carried out taking into account the requirements of SNiP 3.02.01-87 “Earth structures, foundations and foundations”, SNiP 3.01.01-85* “Organization of construction production”; SNiP 12-03-2001 "Occupational safety in construction", SNiP 2.04.01-85* "Internal water supply and sewerage of buildings" SNiP 3.02.01-87, SNiP 3.01.01-85*, SNiP 12-03-2001 Laying steel water pipes with pneumatic test with a diameter of 200 mm * case - work is carried out taking into account the requirements of SNiP 2.04.05-91* "Heating, ventilation and air conditioning", SNiP 3.01.01-85* "Organization of construction production", SNiP 12-03-2001 "Labor safety in construction" SNiP III-4-80* "Safety in construction", GOST 10704-91 "Straight-seam electric-welded steel pipes. GOST 5264-80 "Manual arc welding. Welded connections. Basic types, structural elements and dimensions." SNiP 2.04.05-91*, SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP III-4-80*, GOST 10704-91, GOST 5264-80 Application reinforced anti-corrosion bitumen-rubber or bitumen-polymer insulation on steel pipelines with a diameter of 200 mm - work is carried out taking into account the requirements of SNiP 3.01.01-85* "Organization of construction production", SNiP 12-03-2001 "Labor safety in construction" SNiP III-4-80* "Safety in construction", SNiP 3.04 .01-87 "Insulating and finishing coatings", SNiP 3.04.03-85 "Protection building structures and structures from corrosion", SNiP 3.05.01-85 "Internal sanitary systems", SNiP 3.05.03-85 " Heating network", SNiP 3.05.04-85 (1990) "External networks and structures of water supply and sewerage", SNiP 2.04.01-85* "Internal water supply and sewerage of buildings" SNiP 12-03-2001, SNiP III-4-80*, SNiP 3.04.01-87, SNiP 3.04.03-85, SNiP 3.05.01-85, SNiP 3.05.03-85, SNiP 3.05.04-85 Dragging into the case steel pipes with a diameter of 100 mm - work is carried out taking into account the requirements of SNiP 3.01.01-85* "Organization of construction production", SNiP 12-03-2001 "Labor safety in construction" SNiP III-4-80* "Safety in construction", SNiP 3.04 .01-87 "Insulating and finishing coatings", SNiP 3.04.03-85 "Protection of building structures and structures from corrosion", GOST 10704-91 "Straight-seam electric-welded steel pipes. Assortment", GOST 5264-80 "Manual arc welding. Connections welded. Basic types, structural elements and dimensions.", SNiP 2.04.01-85* "Internal water supply and sewerage of buildings" SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP III-4-80*, SNiP 3.04.01-87, SNiP 3.04.03-85, GOST 10704-91, GOST 5264-80, SNiP 2.04.01-85* Sealing of seals when passing pipes through foundations or basement walls with a diameter of up to 200 mm - work is carried out taking into account the requirements SNiP 3.01.01-85* "Organization of construction production", SNiP 12-03-2001 "Labor safety in construction" SNiP III-4-80* "Safety in construction", SNiP 3.04.01-87 "Insulating and finishing coatings" ", SNiP 3.04.03-85 "Protection of building structures and structures from corrosion", GOST 10704-91 "Straight-seam electric-welded steel pipes, GOST 5264-80 "Manual arc welding. Welded connections. Basic types, structural elements and dimensions.", SNiP 2.04.01-85* "Internal water supply and sewerage of buildings" SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP III-4-80*, SNiP 3.04. 01-87, SNiP 3.04.03-85, GOST 10704-91, GOST 5264-80, SNiP 2.04.01-85* Laying asbestos-cement pipes with connections using asbestos-cement couplings with a diameter of 100 mm - work is carried out taking into account the requirements of SNiP 3.01.01 -85* "Organization of construction production", SNiP 03/12/2001 "Labor safety in construction" SNiP III-4-80* "Safety in construction", SNiP 2.04.01-85* "Internal water supply and sewerage of buildings", SNiP 2.03.09-85 (1988, as amended in 1988) “Asbestos-cement structures”, GOST 1839-80 (1997) “Asbestos-cement pipes and couplings for non-pressure pipelines. TU." SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP III-4-80*, SNiP 2.04.01-85*, SNiP 2.03.09-85 (1988, amended 1988), GOST 1839-80(1997) Oil painting metal surfaces of steel beams, pipes with a diameter of more than 50 mm, etc., number of paints 2 - work is carried out taking into account the requirements: SNiP 3.04.01-87 "Insulating and finishing coatings", SNiP 3.01.01-85* "Organization of construction production ", SNiP 12-03-2001 "Occupational safety in construction", SNiP 3.04.03-85 "Protection of building structures from corrosion", SNiP 3.04.01-87 "Insulating and finishing coatings", GOST 30884-2003 "Oil paints, ready for use." Any surface painting paint and varnish materials is carried out in accordance with the current technological requirements to the use of specific materials and systems, work is carried out on a prepared, dust-free and grease-free surface. The work uses modern materials. SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP 3.04.03-85, SNiP 3.04.01-87, GOST 30884-2003 Punching holes in brick walls for pipes manually with a wall thickness of 0.5 bricks - work is carried out taking into account the requirements: SNiP 3.01.01-85 * "Organization of construction production", SNiP 12-03-2001 "Labor safety in construction", SNiP ll-22-81 "Stone and reinforced stone structures", SNiP 3.03.01-87 "Load-bearing and enclosing structures." Such types of work are carried out for the subsequent use of such holes for the purpose of laying plumbing equipment, plumbing pipelines or other structures. SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP ll-22-81, SNiP 3.03.01-87 Punching in concrete ceilings 100 mm thick holes with an area of ​​up to 500 cm² - work is carried out taking into account the requirements: SNiP 3.01.01-85 * "Organization of construction production", SNiP 12-03-2001 "Labor safety in construction", SNiP ll-22-81 "Stone and reinforced masonry structures", SNiP 3.03.01-87 "Load-bearing and enclosing structures". Such types of work are carried out for the subsequent use of such holes for the purpose of laying plumbing equipment, plumbing pipelines or other structures. SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP ll-22-81, SNiP 3.03.01-87 Punching in concrete walls 100 mm thick holes with an area of ​​up to 500 cm² - work is carried out taking into account the requirements: SNiP 3.01.01-85 * "Organization of construction production", SNiP 12-03-2001 "Labor safety in construction", SNiP ll-22-81 "Stone and reinforced masonry structures", SNiP 3.03.01-87 "Load-bearing and enclosing structures". Such types of work are carried out for the subsequent use of such holes for the purpose of laying plumbing equipment, plumbing pipelines or other structures. SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP ll-22-81, SNiP 3.03.01-87 Electric lighting Section 1. Installation work Shields installed on the wall with spacer dowels, shield weight, kg, up to 6 * - work is carried out taking into account the requirements: SNiP 3.01.01-85 * "Organization of construction production", SNiP 12-03-2001 "Labor safety in construction", SNiP 3.05.06-85 "Electrical devices", SNiP 12-03-99 Part 13 " Electric installation work", GOST 12.3.032-84* 2001 "Electrical installation work. General requirements safety." When installing electrical installations, the requirements of ST SEV 3230-81, GOST 12.1.004-91, GOST 12.1.013-78, GOST 12.1.019-79, GOST 12.1.030-81, GOST 12.1.038-82 must be met. GOST 12.3.003-86, GOST 12.3.009-76, GOST 27321-87, GOST 27372-87, SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP 3.05.06-85, SNiP 12-03 -99 Part 13, GOST 12.3.032-84* 2001, ST SEV 3230-81, GOST 12.1.004-91, GOST 12.1.013-78, GOST 12.1.019-79, GOST 12.1.030-81, GOST 12.1 .038-82, GOST 12.3.003-86, GOST 12.3.009-76, GOST 27321-87, GOST 27372-87 Shields installed on the wall with spacer dowels, shield weight, kg, up to 40 * - work is carried out taking into account the requirements : SNiP 3.01.01-85* "Organization of construction production", SNiP 12-03-2001 "Labor safety in construction", SNiP 3.05.06-85 "Electrical devices", SNiP 12-03-99 Part 13 "Electrical installation work" , GOST 12.3.032-84* 2001 "Electrical installation work. General safety requirements". When installing electrical installations, the requirements of ST SEV 3230-81, GOST 12.1.004-91, GOST 12.1.013-78, GOST 12.1.019-79 should be met. , GOST 12.1.030-81, GOST 12.1.038-82, GOST 12.3.003-86, GOST 12.3.009-76, GOST 27321-87, GOST 27372-87SNiP 3.01.01-85*, SNiP 12-03- 2001, SNiP 3.05.06-85, SNiP 12-03-99 Part 13, GOST 12.3.032-84* 2001, ST SEV 3230-81, GOST 12.1.004-91, GOST 12.1.013-78, GOST 12.1. 019-79, GOST 12.1.030-81, GOST 12.1.038-82, GOST 12.3.003-86, GOST 12.3.009-76, GOST 27321-87, GOST 27372-87 Lamp with l.l. separately installed on pins with the number of lamps in the lamp up to 4 - work is carried out taking into account the requirements: SNiP 3.01.01-85 * "Organization of construction production", SNiP 12-03-2001 "Labor safety in construction", SNiP 3.05.06-85 "Electrical devices", SNiP 12-03-99 Part 13 "Electrical installation work", GOST 12.3.032-84* 2001 "Electrical installation work. General safety requirements", GOST 8607-82 (2004) "Lamps for lighting residential and public premises. Are common technical specifications", GOST 15597-82 (2003) "Lamps for industrial buildings. General technical conditions "SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP 3.05.06-85, SNiP 12-03-99, GOST 12.3.032-84* 2001, GOST 8607-82 (2004), GOST 15597-82 (2003) Lamp with l.l. suspended ceilings , installed on pendants, the number of lamps in the lamp is up to 4 - the work is carried out taking into account the requirements: SNiP 3.01.01-85 * "Organization of construction production", SNiP 12-03-2001 "Labor safety in construction", SNiP 3.05.06-85 "Electrical devices", SNiP 12-03-99 Part 13 "Electrical installation work", GOST 12.3.032-84* 2001 "Electrical installation work. General safety requirements", GOST 8607-82 (2004) "Lamps for lighting residential and public premises General technical conditions", GOST 15597-82 (2003) "Lamps for industrial buildings. General technical conditions" SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP 3.05.06-85, SNiP 12-03- 99, GOST 12.3.032-84* 2001, GOST 8607-82 (2004), GOST 15597-82 (2003) Lamp with l.l. separately installed on pins with the number of lamps in the lamp 2 - work is carried out taking into account the requirements: SNiP 3.01.01-85 * "Organization of construction production", SNiP 12-03-2001 "Labor safety in construction", SNiP 3.05.06-85 " Electrical devices", SNiP 12-03-99 Part 13 "Electrical installation work", GOST 12.3.032-84* 2001 "Electrical installation work. General safety requirements", GOST 8607-82 (2004) "Lamps for lighting residential and public premises. General technical conditions", GOST 15597-82 (2003) "Lamps for industrial buildings. General technical conditions" SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP 3.05.06-85, SNiP 12-03-99 , GOST 12.3.032-84* 2001, GOST 8607-82 (2004), GOST 15597-82 (2003) Lamp with l.l. separately installed on suspensions (rods) with the number of lamps in the lamp 2 - work is carried out taking into account the requirements: SNiP 3.01.01-85 * "Organization of construction production", SNiP 12-03-2001 "Labor safety in construction", SNiP 3.05.06 -85 "Electrical devices", SNiP 12-03-99 Part 13 "Electrical installation work", GOST 12.3.032-84* 2001 "Electrical installation work. General safety requirements", GOST 8607-82 (2004) "Lamps for lighting residential and public premises. General technical conditions", GOST 15597-82 (2003) "Lamps for industrial buildings. General technical conditions" SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP 3.05.06-85, SNiP 12- 03-99, GOST 12.3.032-84* 2001, GOST 8607-82 (2004), GOST 15597-82 (2003) Spot lamp in suspended ceilings, installed on embedded parts, number of lamps in the lamp up to 2 - work is carried out taking into account requirements: SNiP 3.01.01-85* "Organization of construction production", SNiP 12-03-2001 "Labor safety in construction", SNiP 3. 05.06-85 "Electrical devices", SNiP 12-03-99 Part 13 "Electrical installation work", GOST 12.3.032-84* 2001 "Electrical installation work. General safety requirements", GOST 8607-82 (2004) "Lamps for residential lighting and public premises. General technical conditions", GOST 15597-82 (2003) "Lamps for industrial buildings. General technical conditions" SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP 3.05.06-85, SNiP 12 -03-99, GOST 12.3.032-84* 2001, GOST 8607-82 (2004), GOST 15597-82 (2003) Lamp with l.n. with hook suspension for premises with normal environmental conditions - work is carried out taking into account the requirements: SNiP 3.01.01-85 * "Organization of construction production", SNiP 12-03-2001 "Labor safety in construction", SNiP 3.05.06-85 " Electrical devices", SNiP 12-03-99 Part 13 "Electrical installation work", GOST 12.3.032-84* 2001 "Electrical installation work. General safety requirements", GOST 8607-82 (2004) "Lamps for lighting residential and public premises. General technical conditions", GOST 15597-82 (2003) "Lamps for industrial buildings. General technical conditions" SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP 3.05.06-85, SNiP 12-03-99 , GOST 12.3.032-84* 2001, GOST 8607-82 (2004), GOST 15597-82 (2003) Lamp with l.n. ceiling or wall-mounted with screws for rooms with normal environmental conditions, single-lamp - work is carried out taking into account the requirements: SNiP 3.01.01-85 * "Organization of construction production", SNiP 12-03-2001 "Occupational safety in construction", SNiP 3.05. 06-85 "Electrical devices", SNiP 12-03-99 Part 13 "Electrical installation work", GOST 12.3.032-84* 2001 "Electrical installation work. General safety requirements", GOST 8607-82 (2004) "Lamps for residential lighting and public premises. General technical conditions", GOST 15597-82 (2003) "Lamps for industrial buildings. General technical conditions" SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP 3.05.06-85, SNiP 12 -03-99, GOST 12.3.032-84* 2001, GOST 8607-82 (2004), GOST 15597-82 (2003) Lamp with sodium lamp on walls, columns and trusses, including installation of ballasts - work is carried out taking into account the requirements: SNiP 3.01.01-85* "Organization of construction production", SNiP 12-03-2001 "Labor safety in construction", SNiP 3.05.06-85 "Electrical devices", SNiP 12-03-99 Part 13 "Electrical installation work", GOST 12.3.032-84* 2001 “Electrical installation work. General safety requirements”, GOST 8607-82 (2004) “Lamps for lighting residential and public premises. General technical conditions", GOST 15597-82 (2003) "Lamps for industrial buildings. General technical conditions "SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP 3.05.06-85, SNiP 12-03-99 GOST 12.3.032-84* 2001, GOST 8607-82 (2004), GOST 15597-82 (2003) Spotlight, separately installed on steel structure on the wall of a building, with a lamp with a power of up to 500 W - work is carried out taking into account the requirements: SNiP 3.01.01-85 * "Organization of construction production", SNiP 12-03-2001 "Labor safety in construction", SNiP 3.05.06-85 " Electrical devices", SNiP 12-03-99 Part 13 "Electrical installation work", GOST 12.3.032-84* 2001 "Electrical installation work. General safety requirements", GOST 8607-82 (2004) "Lamps for lighting residential and public premises. General technical conditions", GOST 15597-82 (2003) "Lamps for industrial buildings. General technical conditions" SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP 3.05.06-85 SNiP 12-03-99, GOST 12.3.032-84* 2001, GOST 8607-82 (2004), GOST 15597-82 (2003) Illuminated wall signs * "Fire hydrant" - work is carried out taking into account the requirements: SNiP 3.01.01-85* "Organization of construction production" , SNiP 12-03-2001 "Occupational safety in construction", SNiP 3.05.06-85 "Electrical devices", SNiP 12-03-99 Part 13 "Electrical installation work", GOST 12.3.032-84* 2001 "Electrical installation work. General safety requirements", GOST 8607-82 (2004) "Lamps for lighting residential and public premises. General technical conditions", GOST 15597-82 (2003) "Lamps for industrial buildings. General technical conditions "SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP 3.05.06-85, SNiP 12-03-99, GOST 12.3.032-84* 2001, GOST 8607-82 (2004), GOST 15597-82 (2003) Single-key recessed type switch with hidden wiring- work is carried out taking into account the requirements: SNiP 3.01.01-85* "Organization of construction production", SNiP 12-03-2001 "Occupational safety in construction", SNiP 3.05.06-85 "Electrical devices", SNiP 12-03-99 Part 13 "Electrical installation work", GOST 12.3.032-84* 2001 "Electrical installation work. General safety requirements", GOST R 51324.1-2005 "Switches for household and similar stationary electrical installations" SNiP 3.01.01-85*, SNiP 12- 03-2001, SNiP 3.05.06-85, SNiP 12-03-99, GOST 12.3.032-84* 2001, GOST R 51324.1-2005 Recessed two-button switch for hidden wiring - work is carried out taking into account the requirements of: SNiP 3.01.01 -85* "Organization of construction production", SNiP 12-03-2001 "Labor safety in construction", SNiP 3.05.06-85 "Electrical devices", SNiP 12-03-99 Part 13 "Electrical installation work", GOST 12.3.032 -84* 2001 "Electrical installation work. General safety requirements", GOST R 51324.1-2005 "Switches for household and similar stationary electrical installations" SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP 3.05.06-85, SNiP 12-03-99, GOST 12.3.032-84* 2001, GOST R 51324.1-2005 Semi-hermetic and hermetic switch - work is carried out taking into account the requirements: SNiP 3.01.01-85* "Organization of construction production", SNiP 12-03- 2001 "Occupational safety in construction", SNiP 3.05.06-85 "Electrical devices", SNiP 12-03-99 Part 13 "Electrical installation work", GOST 12.3.032-84* 2001 "Electrical installation work. General safety requirements", GOST R 51324.1-2005 "Switches for household and similar stationary electrical installations" SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP 3.05.06-85, SNiP 12-03-99, GOST 12.3.032-84* 2001, GOST R 51324.1-2005 Box with a step-down transformer * - work is carried out taking into account the requirements: SNiP 3.01.01-85* "Organization of construction production", SNiP 12-03-2001 "Labor safety in construction" ,SNiP 3.05.06-85 "Electrical devices", SNiP 12-03-99 Part 13 "Electrical installation work", GOST 12.3.032-84* 2001 "Electrical installation work. General safety requirements", GOST 30030-93, GOST 50571-14-96 "Electrical installations of buildings. Part 7. Requirements for special electrical installations", GOST 50571-21-2000 "Electrical installations of buildings. Part 5. Selection and installation of electrical equipment", GOST 50571-19-2000 "Electrical installations of buildings", GOST 22789-94 "Complete low-voltage devices. Are common technical requirements and test methods "SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP 3.05.06-85, SNiP 12-03-99, GOST 12.3.032-84* 2001, GOST 30030-93, GOST 50571- 14-96, GOST 50571-21-2000, GOST 50571-19-2000, GOST 22789-94 Pulling box or distribution box for pipe wiring, size, mm, up to: 200x200 - work is carried out taking into account the requirements: SNiP 3.01.01-85 * "Organization of construction production", SNiP 12-03-2001 "Occupational safety in construction", SNiP 3.05.06-85 "Electrical devices ", SNiP 12-03-99 Part 13 "Electrical installation work", GOST 12.3.032-84* 2001 "Electrical installation work. General safety requirements", GOST 30030-93, GOST 50571-14-96 "Electrical installations of buildings. Part 7 . Requirements for special electrical installations", GOST 50571-21-2000 "Electrical installations of buildings. Part 5. Selection and installation of electrical equipment", GOST 50571-19-2000 "Electrical installations of buildings", GOST 22789-94 "Complete low-voltage devices. General technical requirements and test methods "SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP 3.05.06-85, SNiP 12-03-99, GOST 12.3.032-84* 2001, GOST 30030-93, GOST 50571- 14-96, GOST 50571-21-2000, GOST 50571-19-2000, GOST 22789-94 Vinyl plastic pipe according to installed structures, on walls and columns with fastening with staples, diameter, mm, up to 50 - work is carried out taking into account the requirements: SNiP 3.01.01-85 * "Organization of construction production", SNiP 12-03-2001 "Labor safety in construction", SNiP 3.05 .06-85 "Electrical devices", SNiP 12-03-99 Part 13 "Electrical installation work", GOST 12.3.032-84* 2001 "Electrical installation work. General safety requirements", GOST 30030-93, GOST 50571-14-96 "Electrical installations of buildings. Part 7. Requirements for special electrical installations", GOST 50571-21-2000 "Electrical installations of buildings. Part 5. Selection and installation of electrical equipment", GOST 50571-19-2000 "Electrical installations of buildings", GOST 22789-94 " Complete low-voltage devices. General technical requirements and test methods "SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP 3.05.06-85, SNiP 12-03-99, GOST 12.3.032-84* 2001, GOST 30030-93, GOST 50571-14-96, GOST 50571-21-2000, GOST 50571-19-2000, GOST 22789-94 Vinyl plastic pipe for installed structures, for walls and columns with fastening with staples, diameter up to 25 mm - work in progress taking into account the requirements: SNiP 3.01.01-85* "Organization of construction production", SNiP 12-03-2001 "Labor safety in construction", SNiP 3.05.06-85 "Electrical devices", SNiP 12-03-99 Part 13 " Electrical installation work", GOST 12.3.032-84* 2001 "Electrical installation work. General safety requirements", GOST 30030-93, GOST 50571-14-96 "Electrical installations of buildings. Part 7. Requirements for special electrical installations", GOST 50571-21-2000 "Electrical installations of buildings. Part 5. Selection and installation of electrical equipment", GOST 50571-19-2000 "Electrical installations of buildings", GOST 22789-94 "Complete low-voltage devices. General technical requirements and test methods "SNiP 3.01.01-85*, SNiP 12-03-2001, SNiP 3.05.06-85, SNiP 12-03-99, GOST 12.3.032-84* 2001, GOST 30030-93, GOST 50571-14-96, GOST 50571-21-2000, GOST 50571-19-2000, GOST 22789-94

This additional element bathrooms today are very popular among the population, because... is integral part registration various interiors modern bathroom.

Pedestals allow you to hide various communications, and also decorate the bathroom, because... It has an elegant shape, a beautiful faience, porcelain or ceramic structure and a variety of colors that can be matched to any interior.

Often the pedestal and sink are sold as a single set, but today the option is widespread when it is offered to the buyer separately, because is an independent element decor, bathroom decoration and performs other functions.

Characteristics of pedestals

The pedestal for the sink is the leg located under it. It can have the shape of a vase, cylinder, parallelepiped, drop, etc. There is also a semi-pedestal, which does not stand on the floor, does not have a back panel, but is attached to the wall, hiding the siphon and pipes.

Thanks to such a support or pedestal, the bathroom space is not visually overloaded with plumbing and sewer communications, and also significantly saves space in a small room.

Our online store offers an assortment of earthenware, porcelain and ceramic pedestals made by manufacturers from Russia, Germany, Italy, Spain, Sweden, Switzerland, Turkey and other countries.

The sink and its leg must be made of the same material. It must also match the sink in size, shape, color, decor, location, i.e. harmonize with her. Therefore, first the sink is selected, and then the pedestal.

You can buy a pedestal on our website:

• white;
• beige;
• green;
• red;
• blue;
• black color.

When purchasing a pedestal for a sink, you should definitely measure the height above the floor at which this sink is mounted, so that later you do not have to completely redo the entire structure and decorative finishing bathroom walls and floors.

Buying furniture and plumbing equipment is not an easy process, as it might seem at first glance. In order for purchases to fit harmoniously into the interior and to be easy to use, their choice must be approached with full responsibility. Especially when it comes to arranging a bathroom or toilet. These rooms can be decorated in any style and have different area, but they must definitely be functional and accommodate all the necessary devices. This is why the size of the bathroom sink plays a role main role when choosing it.

Before purchasing a vanity, it is recommended that you draw up a scale drawing of the bathroom. It is necessary to mark all items that are planned to be placed in the room. Including the sink itself. Visual diagram will help determine the dimensions of the washbasin and the success of its location.

The first thing to think about is the width of the sink. The ease of use depends on this parameter.

Washbasins can be divided into several types:

• Compact (35 – 45 cm). Designed for rinsing hands, because... Regular washing in such a sink is difficult. Most often designs small size installed in a bathroom or small bathroom.
• Standard (50-65 cm). This width prevents splashes of water from scattering throughout the room. Suitable for bathrooms with standard sizes.
• Wide (65-90 cm). Great option for a spacious restroom.
• Extended (from 90 cm). Such washbasins are most often double structures designed for simultaneous use by several people. Suitable for large rooms only.

Having decided on the width of the sink, you should pay attention to many other things important parameter– height.

Washbasin sizes: choose the height of the location

The height of the sink should ensure comfortable hygiene procedures for all family members. A problem with choosing may arise due to the fact that the people living in the house are of different heights. In this case, you will have to settle on the average, which is considered optimal for both men and women.

80 – 85 cm is the height at which experts recommend installing the washbasin. Wherein top part mirrors (or wall cabinets) should be located at a distance of 190 cm from the floor level.

If only large adults live in the house, the level of plumbing may be higher. However, it makes no sense to “tear up” the structure if there are persons in the apartment who have different heights. For children, it is recommended to install a children's washbasin (low). If this is not possible, a small chair should be placed next to the sink to make using the equipment comfortable for them as well.

For people of different genders, the ideal washbasin height is slightly different:

• 95 – 100 cm – for men;
• 80 – 95 cm – for women.

You can achieve the ideal height by installing a special washbasin model. For example, by attaching suspended structure using brackets. You can also purchase a sink with a cabinet: some types have adjustable legs, thanks to which the height of the washbasin changes by 7 - 10 cm.

The size of a bathroom sink with or without a cabinet: choosing the depth

The depth of the washbasin is another important parameter that determines whether the use of plumbing equipment will be comfortable. For example, with a small value of this parameter, water splashes will scatter throughout the room.

When talking about sink depth, we mean one of two parameters:

• Distance from the edge of the washbasin to the wall;
• The height of the bowl itself.

If we take the distance to the wall as the depth, optimal indicator the value will be from 48 to 62 cm. The recommended bowl height is from 13 to 15 cm.

You can determine whether a sink is ideal for a given parameter without the help of a tape measure. It is enough to lean against the washbasin and extend your arm parallel to the floor. If the back wall of the structure is at the level of the fingers or the middle of the palm, this model is a comfort standard.

All required dimensions can be found in the technical data sheet of the equipment. They are easy to decipher. For example, in the 550x480x150 entry, the first number indicates the width of the product, the second parameter indicates the distance to the wall, and the last parameter indicates the depth of the bowl.

Sink pedestal: sizes and variety of models

Having decided on a washbasin with a pedestal, you should pay attention to the size of the entire structure, which consists of the size of the bowl and the height of the leg. It is best to purchase this model in a store so that you can take a closer look at the display sample. The height of the pedestal varies from 60 to 85 cm depending on the manufacturer.

Leg dimensions are written in three numbers. For example, in the designation 640x215x200, the first value indicates the height of the column, the second and third - its length and width. If you have questions when deciphering the parameters, you should contact the seller for help.

This is extremely important: extra centimeters will not allow the plumbing to fit in the room.

The pedestal for washbasins is most often made from the following materials:

• Faience. Affordable, but least resistant to mechanical damage product. However, if the earthenware tulip sink is used carefully, the design will last for many years.
• Porcelain. It has high performance indicators, which explain the significant cost of this material. A porcelain washbasin will not crack if a heavy object falls on it.
• Semi-porcelain. It is a mixture of components. Semi-porcelain washbasins are less durable, but also quite durable.

Pedestal sinks have many non-standard models that will not only decorate the bathroom, but will also allow you to optimally place the necessary plumbing fixtures in small room. For example, washbasins in the shape of shells, which are distinguished by their exquisite shape, are very popular.

Another original solution: purchasing a bathtub and sink in the shape of an oval irregular shape. Place the plumbing fixtures in such a way that the tapered ends of the structures are on top of each other. Dimensions of this equipment may be higher than standard, but the room will not seem cramped and cluttered.

How to determine the size of a bathroom sink (video)

When choosing a washbasin, you should rely not only on aesthetic preferences, but also on the size of the structure. This is especially true for non-standard models, because even the most compact shells do not always fit harmoniously into the room. The washbasin is the most important equipment in the bathroom, so you need to consider all parameters when purchasing. And remember that, first of all, it should be comfortable, and not fashionable or fancy.

The Santekhsystems chain of stores offers pedestals for washbasins different designs from famous manufacturers plumbers: Ifo, Cersanit, Villeroy&Boch, Vitra, Gustavsberg, Roca, Am Pm. From us you can buy a pedestal sink for your bathroom at competitive prices, we are official representatives brands and work directly without intermediary markups.

Such designs are in great demand due to the harmony of the pedestal and the sink; there is no need to buy a separate countertop, since this type of sanitary ware is a complete design composition. All that remains for the buyer is to select the general style bathroom interior.

Low prices for pedestals for sinks in the Plumbing Systems store

Pedestal sinks for the bathroom can be divided according to several parameters:

• By country of manufacture: Italy, Russia, France, China and many others. To a large extent, the cost will be determined by this factor;
• The price also depends on the class of the model: budget or luxury. If you wanted to buy a black pedestal sink from Italian manufacturer, then the cost will be corresponding;
• According to the material for production. The material can be marble, porcelain, ceramics and earthenware;
• According to the shape of the pedestal, they can be square, rectangular or round.

In our store you can purchase plumbing fixtures and accessories of any kind, and to improve the level of service we provide wide range services:

• Personal discounts for wholesale buyers and repeat purchases;
• Remote purchasing on the site will save you hours of wandering around shopping centers;
• If upon receipt of the goods defects, chips or other damage are found, a refund is guaranteed;
• We operate in 21 regions of the Russian Federation, where there are points of delivery of goods;
• Several payment methods: bank transfer, card or cash.

In our more than 30,000 items of plumbing fixtures and accessories, if you find it difficult to make a choice, you can always contact our specialists for help.