Stairs.  Entry group.  Materials.  Doors.  Locks.  Design

Stairs. Entry group. Materials. Doors. Locks. Design

» Hanging chairs in the interior (30 photo examples). Hanging wicker chair - types and design of models Hanging in the interior

Hanging chairs in the interior (30 photo examples). Hanging wicker chair - types and design of models Hanging in the interior

Hanging chairs are not used so often in residential interiors, but the use of this item always greatly enlivens and decorates the room, making it unusual, bright and very cozy.

The very idea of ​​a suspended structure of a durable frame is due to the fact that, for unknown reasons, we feel very comfortable in this kind of “cocoon”. Hiding from the whole world in a deep armchair, you can spend hours reading books, watching TV or just relaxing, feeling incredibly protected.

Types of hanging chairs

  • Suspended from the ceiling

Chairs that are mounted to the ceiling definitely look much more impressive. The lowering long and thin chain or cable that holds an impressively sized chair together with an adult always arouses special interest. The disadvantage of this arrangement is the mandatory adherence to the technology of mounting a hook that will hold the entire structure.

If the features of your room do not meet the listed standards, you should not take risks with installing a hanging chair - it is better to buy a model on a stand, otherwise you risk tearing off part of the ceiling. Also, the very presence of a holder on the ceiling suggests that rearranging objects will be undesirable - it is, of course, possible, but for the new location of the chair you will have to install another massive mount, and the old one will remain in the same place until the next repair.

  • Chairs on the counter

Chairs on a counter are more mobile. They don't require any special conditions for installation - except for availability free space in the room. They can be moved from one corner of the room to another, which is certainly a huge advantage for those who are not 100% sure that they are not going to change the location of objects in the apartment or house in the near future.

Hanging chair materials

  • Vine and rattan

Hanging chairs made of wicker and rattan look very natural. They are often used in both residential and public interiors, as well as in exterior design. Rattan can be natural or artificial, which has virtually no effect on the appearance and characteristics, but does affect the cost. Natural materials They are often left in their natural color, but in many cases they are painted. The most popular colors are white and red.

  • Plexiglas, plastic and acrylic

This material always looks very modern. The possibilities of acrylic allow you to make chairs of any fancy shapes and colors. The favorite model of world designers is the hanging ball chair made of transparent plastic BUBBLE CHAIR from Eero Aarnio (diameter 118 cm, weight 32 kg). It can most often be seen on the pages of fashion magazines. It is popular precisely because of its very universal appearance, which fits harmoniously into almost any interior.

  • Textile

The base of the chair, made of textiles, is more reminiscent of a hammock in its structure. After all, be that as it may, the woven frame will still be soft and deformed when you sit in it. When buying such a chair, be prepared for the fact that it is most comfortable to just sit, rock, or, at most, read. It is very mobile and is not suitable for doing any scrupulous work, eating, etc. while sitting in it.


Permissible weight of the structure

The permissible weight of a hanging chair is considered to be from 90 to 150 kg, depending on the model. When installing, you should also take into account the maximum load weight.

Standard seat dimensions

Most often, models have round shape bases and have a diameter of 80 to 140 cm. When planning a place in the apartment for a hanging chair, remember the amplitude of vibrations and also allocate free space for it - and this is at least half the diameter of the chair. That is, having bought a chair 100 cm in diameter, provide it with an area of ​​at least 50 cm so that you can swing in different sides while sitting in it.

Technological requirements for installation

Special requirements are put forward only for those chairs that are intended to be mounted on the ceiling. In any case, this ceiling must be monolithic; in no case should you attach the chair to plasterboard or wooden lining- remember about the weight of 100-150 kg that this ceiling still has to withstand.

Give the builders a task, and using anchor bolts and other special reinforcements, they will help you install a hook into the ceiling. It may look like a regular hook, which you can then paint in the color of the ceiling so that it is not so noticeable, or it may also have hidden mount(most often it is hidden behind the subsequent lowering of the plasterboard ceiling, in which a hole is made at the place where the cable is attached).

The latter option looks more aesthetically pleasing, but in our opinion, it is not worth the difficulties that may arise during operation (it will be very difficult to get to the fastening itself), so we advise you to choose the option with a regular hook.

Where and how to use hanging chairs in the interior

  • In the living room

Hanging chair will be an excellent addition to a set of furniture in the living room. Standard sofas and armchairs will look much more interesting in combination with such an unusual design object. A hanging chair in a two-story living room looks especially original. If the dimensions of your living room are quite modest, place the chair closer to the corner of the room. If there is enough space, the bracket can be placed in the center of the room - as long as there is the necessary space for passage and amplitude of vibrations.

1

  • In the bedroom

In rest rooms, the location of the chair is dictated by the layout. And the closer you place it to the window, the better. In the bedroom, make sure that the textiles on the pillows inside the chair are harmoniously combined with other fabrics. It is very pleasant to read in such a chair in the evenings, covered with a warm blanket, so it will become your undisputed favorite.


, beds, armchairs various types- this interior items special attention is paid and the most stringent requirements are put forward when selecting them. We can safely say that such furniture totals greatest number various models, variations and manufacturing methods. One of the most original and unusual places for relaxing in the house - this is a hanging chair. The first mention of this piece of furniture dates back to the 50s of the last century. Since then, the hanging chair has become not only one of the whims of interior fashion from the pages of glossy magazines, but also a comfortable component living rooms, bedrooms And children's rooms in simple apartments.

Types of hanging chairs

Over more than half a century of its existence, the hanging chair has undergone many metamorphoses and “reincarnations”, and at this time there are already several types of this piece of furniture.

  • With a rigid frame - such chairs are made from rattan, acrylic, plastic base, covered with durable fabric. Wicker can also be used as a material for making a rigid chair frame.
  • With a soft frame - this type of chair resembles an ordinary hammock. Its main difference is its size. A hanging frameless chair is much smaller than a hammock and takes up little space. When used, it takes the shape of the human body, that is, you can simply sit in it or take a horizontal position.
  • Hanging cocoon chairs. Their peculiarity is that inner space 2/3 is hidden from prying eyes using wicker walls. This vacation spot will appeal to those who are fans of privacy.
  • The “Drop” chair is usually installed in children's rooms. Outwardly it looks like house, and some models even have doors.

In addition, hanging chairs are divided into types according to other characteristics - the type of fastening (axial and rod), the material used and the load. Before choosing a chair, you need to decide where and how it will be used, and what intensity of load is expected on it.

Advantages and disadvantages of hanging chairs

Like everything that surrounds us, hanging chairs have their pros and cons. Their advantages include originality and uniqueness, if the chair is made with your own hands, in a single copy. But their main advantage is, of course, comfort. Where else, if not in a hanging chair, can you remember your childhood and calm your nerves that have been shaken during the day?

The disadvantages of such a piece of furniture are that it is difficult to move, because installing or dismantling a hanging chair is quite difficult. In addition, if you move the chair to another place, then ceiling traces of the previous fastening will remain.

DIY hanging chairs: do it yourself

Having a hanging chair is a dream for many. But most people prefer not to buy it, but to make it with your own hands. You don’t need to have any special skills, you just need to prepare everything necessary tools and materials. To make a hanging frame chair with your own hands you will need:

  • gloves,
  • scissors, fabric meter or construction tape,
  • thick fabric,
  • base for the frame - metal, wood, plastic or acrylic hoops,
  • trouser tape, interlining,
  • metal fittings (ring and buckles) for mounting and assembling the chair,
  • polyamide threads or tapes,
  • medium-thick foam rubber in the form of strips or squares,
  • slings and cords that can withstand heavy loads.

All these materials can be purchased at any hardware or haberdashery store.

An original and cozy piece of furniture in the interior is a hanging chair. His unusual look enlivens the room, makes it unique and special. In addition, such a chair promotes relaxation, which is very important for proper rest.

What types of hanging chairs are there?

Main differences different types hanging chairs - installation features:

  • hanging chair to the ceiling;
  • chair on the counter.


The second option is also suspended, only the basis for installation is not the ceiling, but a special rack.


Chairs suspended from the ceiling look impressive: a special hook is mounted in the ceiling, and a long chain or cable is attached to it, which can support the chair itself and the person sitting in it. Wicker chairs made of wicker or rattan look original in an eco-style interior.

Armchairs on a stand take up a lot of space in the room, but they are mobile and safe: there is no need to calculate the strength of the structure and spoil the ceiling, and if necessary, the chair can be rearranged in the room and even taken outside the room: for example, in country house– installed on a veranda or terrace. It’s so nice to sit in a wicker chair on a warm summer day with a book in your hands.

The shape can also be different: a hanging chair in an apartment or in a country house can have a spherical, drop-shaped appearance, resembling a hammock or a swing. The latter are more often used for the street, open terrace, and the cocoon chair is perfect for any interior.

Materials for the chair

A wicker hanging “cocoon” chair is considered traditional, and the materials for it can be different:

  • vine;
  • natural or artificial rattan;
  • nylon or cotton cord.

These chairs look great in both classic and modern interiors: hi-tech, loft or country, Scandinavian style They will immediately acquire individuality. Wicker materials are often left in their natural shade, although they can be dyed to your desired color.

Modern materials - plastic, plexiglass and acrylic - are distinguished by a variety of colors, which means that with their help you can transform the interior.

They look great in a children's room, minimalist styles, becoming a bright spot of color in the room. The ball shape is popular, and soft pillows will help create comfort.

A textile hanging hammock chair is a popular option for a summer residence, country house. You can relax there in the shade of trees on a warm summer day. It’s comfortable to read a book or take a nap in such a chair, but it will be difficult to do other things.


Hanging chair in the interior

In an apartment or country house you can find a cozy armchair appropriate place. Of course, in a small-sized “one-room apartment” or “Khrushchev” it will be problematic to do this, since to install the chair you need to allocate additional free space: at least half the diameter of the chair.

Calculate in advance whether the ceiling can withstand the load: it must be monolithic, but not plasterboard or wood: in addition to the weight of the chair itself, it must withstand the maximum permissible weight - which is 90-150 kg. When installing the chair on a stand, such difficulties are not expected.

In the living room, even a standard set of furniture can be combined with a wicker hanging chair. It should match the style of the room.

In classic, modern European styles– Mediterranean, Scandinavian and others – excellent option will be a wicker or rattan chair in a natural color. It will also fit into country style, and in a minimalist interior you can place a ball chair made of transparent or colored acrylic.

In the bedroom, the choice of material and installation location will dictate the interior layout. Choose soft pillows for the chair that match the rest of the textiles in the room. Throw on a cozy blanket and enjoy the evenings an interesting book or handicrafts.

Children will be delighted if you place a wicker “cocoon” or “drop” chair in the nursery. You can make a children's hanging chair with your own hands, but it is important to take care of the child's safety, so be especially careful when choosing a model and installation.


Just look at the photo of a hanging chair and you will want to drown in it and enjoy the lulling, even rocking. An original piece of furniture will decorate any interior, making it unique and attractive.


Photo of a hanging chair in the interior

Hanging chairs are an alternative to a rocking chair on runners at home and a hammock in nature. Comfort and gentle rocking will help you relax and unwind after a hard day. The variety of models and materials for manufacturing allows you to harmoniously integrate such a chair into any interior. And you don’t have to spend money on a purchase. Some models are easy to make with your own hands.

Types of hanging chairs

They produce a wide variety of models and designs. They can be made of wood, metal, rattan, wicker, transparent plastic. There are models that you can make yourself without any problems.

  1. Swing chair. Fastening is carried out at two points. Due to this, the structure swings in one plane. There are soft models (chair-hammock) or on a rigid frame:
    • the basis of the first option is a soft fabric or wicker fabric, which is easy to sew, weave using the macrame technique or crochet - the ends of the panel are attached to the transverse rod with 4 slings, and it is already suspended from the ceiling or a leg stand;
    • the second option has a rigid frame made of acrylic, plastic, wood, rattan or metal in the form of a hoop covered with a soft base.
  2. Nest chair. The basis of the design consists of 2 durable hoops. The model has flat bottom and low sides, which are braided with cord, rope or tied with strong threads.
  3. The cocoon chair (egg) differs from its counterparts in its greater closedness, often up to 70%. Back and side surfaces tall and connected above the head. The rigid frame is braided suitable material or covered with fabric. Varieties of this model - basket chair and drop chair - perfect option for a children's room.

Hanging chairs of different shapes - gallery

Finishing techniques and materials

Such chairs usually have a rigid frame and a seat made of various materials.

  1. Textile. An affordable and easy-to-work material, the density and strength of which is selected based on the expected load. A raincoat or tarpaulin will do. A chair for children made from old jeans with pockets and rivets looks original.
  2. Knitted fabric. Craftsmen who master knitting or crocheting techniques can use their skills to create original chair from plain or multi-colored threads.
  3. Macrame. Weaving from a durable cord will not only last a long time, but will also add a special flavor to any interior.
  4. Vine, rattan. Armchairs made from environmentally friendly materials, will decorate any interior, but working with them requires special skills. In addition, rattan does not grow in our country.

This is interesting! An unusual and very durable material for braiding a chair - a thread made from plastic bottles. This chair will not get wet, will not become deformed, and can be hung outside.

Frame material

The base of the chair can be made from different materials.

  1. Gymnastic hoop. Suitable only for a child's chair; for an adult, its strength is not enough, since the cross-sectional diameter is 16 mm, and for the frame of the chair you need 2 times more.
  2. Metal pipe. The product made from it will be durable, but heavy - at least 7 kg. To make it you will need pipe bending equipment.
  3. Tree. The design will be durable, lightweight, and environmentally friendly. Since the material absorbs moisture and dries out in the sun, wood for outdoor chairs must be treated with impregnations. This will protect the material from rotting.
  4. Metal-plastic pipes. Durable, lightweight and non-corrosive material. When using coiled pipes, there is no need to bend them. The ends of the segment are connected with wooden or plastic insert and secured with self-tapping screws.

You should not use old material when making a chair: such furniture will not last long.

Hanging rockers made of various materials - gallery

Making a hanging chair with your own hands

A DIY hanging chair will look good in a country house or on the veranda of a private house. The easiest to make is a hammock chair. It can be done in several ways from different materials, but the most convenient and uncomplicated of them are macrame or textiles.

Hammock without frame

To work you will need:

  • dense fabric - 1.5x1.5 m;
  • durable cord;
  • wooden rod for fastening;
  • sewing supplies.

After preparing everything you need, proceed to the assembly process.

Swing on a rigid frame

To make it you will need:

  • hoop with a diameter of 90–95 cm;
  • durable fabric 3 m long and 1.5 m wide;
  • zipper - 90–95 cm;
  • strong cord or rope - 10 m;
  • metal rings for attaching the structure to the ceiling;
  • interlining;
  • scissors;
  • tape measure;
  • sewing supplies.

When all materials are prepared, proceed to making the chair.

  1. Fold the fabric in half and lay it on a flat surface.
  2. Place the hoop in the center, at a distance of 20–25 cm from it, apply markings along the circumference and connect the marks with a line. Cut out 2 circles.
  3. On one of the blanks, make a cut through the center with a length equal to the diameter of the hoop, sew a zipper in this place.
  4. Connect both pieces with a seam around the circumference.
  5. Make cutouts on the finished case for attaching ropes to a hoop 10 cm long. To do this, fold the case in half and measure 45 ° C from the fold line in one direction, 30 ° C in the other, put marks.
  6. Duplicate the marks on the second part of the circle. The distance between the cutouts in the front of the chair should be greater than in the back.
  7. Seal the slits with tape.
  8. Wrap the hoop with a strip of padding polyester and connect it with a seam to secure it.
  9. Insert the hoop into the case and fasten the zipper.
  10. Cut the cord into 4 pieces, 2.2 and 2.8 m long. Fold each piece in half and secure it to the hoop. To do this, thread a loop through the hole in the cover, and insert the ends of the cord through it and tighten them. Long cords should be in the front of the chair, and short cords should be in the back.
  11. Tie a short and long cord on the right side to one ring, and on the left to the other. Make strong knots.
  12. Hang the rings from the ceiling, beam, or thick tree branch outside.
  13. Place pillows inside or sew a round mattress. This will make the chair even more comfortable.

Instructions for making a rocking chair from a hoop - video

How to make a wicker nest chair: step by step photos

By making the seat flat and providing the structure with sides, you can get a nest chair. For this rocking chair you will need:

  • two hoops made of metal-plastic pipe with a cross-section of 35 mm: for the seat with a diameter of 70 cm, for the back - 110 cm;
  • polyamide cord 4 mm thick - 900 m;
  • sling or strong rope - 12 m;
  • a thicker cord to connect the seat and backrest.

To make this chair you need to know how to weave.

  1. First, braid both hoops:
    • wrap the pipe with a cord (it is worth taking a cord with a polypropylene core, as it will help make a stronger binding);
    • Stretch the thread well (each next turn should fit evenly and tightly to the previous one);
    • every 20 turns, secure the thread, stretching it as much as possible and twisting it;
    • For greater strength, coat the weaving with glue.
  2. At equal intervals, fasten pieces of double-folded cord onto the braid of the hoop with a double loop. They should take up half the length of the hoop.
  3. Using flat knots in a checkerboard pattern, weave the bottom of the chair, securing the remaining ends to the free semicircle. The tension on the cords when weaving should be quite strong. It’s okay if the hoop is slightly deformed; the shape will be restored in the future.
  4. Connect the finished seat and the back hoop by tying them to each other with a cord in the front part of the structure.
  5. At the back, connect the seat and the backrest hoop with two wooden spacer rods, making cuts in their ends for strong fastening. The length of the spacers is selected in accordance with the desired backrest height.
  6. Attach cords to the upper arch of the back and weave from top to bottom. Attach the remaining cords to the seat and form them into tassels.
  7. Connect the upper arch of the backrest and the seat with a thick cord parallel to the spacers, and then remove them.
  8. Bind to finished design slings. They also need to be made using the macrame technique from cords.
  9. Hang the chair.

Weaving “checkerboard” using the macrame technique - video

How to make an egg chair at home

An egg chair (cocoon) is the most difficult option for a home craftsman. The structure is closed with three sides, and the side surfaces and back close above the head.

  1. For work you can use metal-plastic pipes, assembling a frame from a hoop and additional arcs. To give additional rigidity, the structure is strengthened with several horizontal arcs, the elements are connected to each other with self-tapping screws.
  2. The finished frame is braided with cord using the macrame technique, covered with fabric or crocheted.
  3. For someone who knows how to work with wood, it’s easy to cut the frame out of thick plywood.

Children's cocoon chair made of fabric

For children, a cocoon chair can be made from fabric. It does not take up much space, will fit organically into the interior of a child’s room and is not dangerous.

To make it you will need:

  • 2 meters thick fabric 1.5 m wide;
  • lightning;
  • pillow or inflatable balloon;
  • sewing supplies.

The technique for making a cocoon is not complicated, the main thing is to follow the instructions.


Instead of a pillow or an inflatable chamber, you can insert a hoop into the bottom of the chair, then you will get a drop chair.

How to make a baby cocoon chair - video

Attaching suspended rockers to the ceiling, stand, beam

For any suspended structures the main thing is reliable fastening. The safety of those who will use the chair depends on it. There are several installation options:

  • to the ceiling;
  • to the leg stand;
  • to a tree branch or beam (for the street).

If indoors suspended ceiling, then installing the mount will be problematic. In this case, you need to mount the structure before attaching the ceiling or you should purchase a special stand-leg.

Let's consider different variants installation

  1. You can drill a hole in the concrete ceiling and install a powerful anchor with a hook into it for hanging the structure. There are special kits on sale, consisting of an anchor, a hook and a chain. The fastener must support a weight of at least 120 kg.
  2. The voids in the ceiling through the hole must be filled with a special solution made from high-strength polymers - chemical anchors. Such compositions are sold in tubes for construction syringes. Then you need to insert the anchor into the hole and wait a day until the composition dries completely.
  3. For ceilings with strong floor beams or for terraces and outdoors, bolting is suitable.
  4. For suspended ceiling It is worth purchasing a special suspension that has a bracket that is attached to the concrete ceiling and comes out through the suspension. A hook is screwed to it.

    The mounting bracket is installed on concrete ceiling, then a hook is screwed to it

  5. The slings are tied to a tree branch with a strong knot.
  6. The stand-leg can be purchased at the store. It is convenient because the chair is not permanently fixed in one place and can be moved, and, if necessary, disassembled and transported.

Drawing of a stand for making it yourself

You can actually make the simplest leg stand for a hanging chair yourself.

  1. The wooden stand consists of only 5 parts, but it cannot be made without special equipment; all the parts are bent.
  2. The most common option is a metal stand. To make it you will need a metal pipe, pipe bending equipment and welding.
  3. A simple version of a metal stand: the design does not require complex drawings or special skills.

    For stability, a simple metal stand is attached to a vertical support with a chain or cable

To fully relax, you don’t have to spend a lot of money. If you approach the matter creatively, relaxation will become not only the relaxation in the hanging chair, but also the process of making it. And the product will cause legitimate pride.

In an effort to comfortably arrange their living space, many people prefer non-standard design solutions. They are able to bring originality to a familiar interior and provide additional comfort. These items include hanging chairs that you can make yourself.

What kind of hanging chairs you can make yourself

Among the variety of hanging chairs, there are models that you can make yourself. Such options will become the highlight of your interior. Besides, self-production allows you to bring to life an individual plan, which is based on proven and reliable designs.

Hanging swing

Unusual swing chairs are made from various materials. The peculiarity of such structures is their elegance, simplicity and the ability to use both hard and soft frames. These chairs can become stylish decoration country house, an unusual addition to the interior of a bedroom, living room, children's room or veranda.

Wicker cocoon

No less popular is the cocoon chair or egg chair. A special feature of the model is the presence of walls that hide the internal space by about 2/3. These chairs allow you to enjoy privacy; they are most popular among children due to their resemblance to a hanging house suitable for games. Usually cocoons are made from natural materials, intended for weaving.

Nest chair made of hoop

As the most popular homemade model protrudes a nest chair made on the basis of a hoop frame. This model can be equipped with many decorative elements, and its shape fits harmoniously into the living space modern apartments. A variety of weaving techniques are used to make a nesting chair.

Materials and techniques for making home chairs

When choosing the materials needed to make hanging chairs, first of all take into account the features of the model you are interested in.

  1. Thick textiles, synthetic ropes of various types and wooden blocks are suitable for swing chairs.
  2. A cocoon chair is made from rattan, willow twigs, bast, willow or bird cherry, which have the necessary flexibility.
  3. To make a nest chair, you need plastic or steel hoops to ensure structural rigidity. You also cannot do without wear-resistant textiles, synthetic fillers, decorative cords for weaving and wooden blocks of different sizes.

To create the seats of hanging chairs, craftsmen use various techniques:

  • macrame. The artistic interweaving of rope and rope knots gives the chairs airiness, providing an impeccable appearance;
  • patchwork. To ensure the strength of the seat, the patchwork fabric is sewn on top of a dense wear-resistant material;
  • knitting. The combination of durable cords of various colors allows you to implement unusual design solutions;
  • Tatting. Thanks to their openwork, these designs look weightless, instantly attracting attention.

Remember that the materials chosen must be able to withstand certain weight loads. Fabric that is too thin or lace can tear under the weight of a large person. Special attention and fastening elements also deserve testing for strength: chains, ropes, braid on which the structure is suspended.

DIY hanging chairs - gallery

A hanging swing chair made of fabric is a convenient addition to a country house Children will love this cocoon chair made of thick fabric. Rattan hanging cocoon chair is strong and durable A hanging nest chair made of thick fabric is suitable for relaxing on summer cottage A simple model of a swing chair is easy to make with your own hands An original handmade hanging chair will become a source of pride for its owners. A hanging swing chair woven using macrame technique adds coziness and comfort. An openwork seat for a hanging chair can be woven from thick cord Hanging chairs can be used as a cradle for a baby

Step-by-step instructions for making a hanging swing chair

The swing chair can rightfully be called one of the most simple models that you can do yourself. To create it you will need:

  • 2 meters of dense fabric (canvas, satin, trouser fabric);
  • a wooden stick about 1 m long and 5–6 cm in diameter;
  • drill and twist drill (15–20 mm);
  • carbines (11 cm) with a load capacity of 160 kg;
  • rope for static belay with a thickness of 10–11.5 mm with a breaking load from 2600 to 3200 kgf;
  • sewing machine, scissors, ruler.
  • paint, brushes, iron and durable synthetic fiber threads.

Having prepared everything you need, you can start making an unusual interior detail.

  1. Fold the selected fabric in half, then count 18 cm from the top corner.
  2. Carefully cut off the resulting triangle (photo 1).
  3. Hem all sides of the fabric cut, bending the edges by 1.5 cm (photo 2).
  4. Create pockets for the ropes (Photo 3). On the long side of the workpiece, fold the edges 4 cm and sew them with sewing machine(photos 4 and 5).
  5. Make two holes on both sides of the wooden stick at a distance of 5 cm from each other, and the distance between pairs of these holes should be about 80 cm (photo 6).
  6. Thread a rope into the holes located closer to the center of the stick and secure it with knots. At the same time, in the center of the cable, also tie a knot necessary for attaching the carabiner.
  7. Pass the sections of cable hanging under the stick through the fabric blank, and insert its ends into the free holes located closer to the edges of the stick. Secure them with a secure knot (photo 8).
  8. Attach two carabiners connected to each other to a hook pre-fixed to the ceiling. This will ensure you can rock safely in the chair. Thread the cable into the lower carabiner.

The resulting hanging swing chair can be additionally equipped with soft pillows, providing comfort.

How to make a hanging hammock yourself from a hoop and fabric - video

Drawings and diagrams for a cocoon-shaped structure

For the manufacture of original model hanging chair you will need:

  • rattan or willow rods with a diameter of 10 or 15 mm, approximately 450 pcs.;
  • a ready-made metal hoop, metal pipes or several thick vine branches woven together in the form of a circle;
  • strong rope and glue, which will be needed for tying the frame;
  • knife, ruler, pruning shears and awl;
  • nylon cord with a cross-section of 4 mm, used for weaving the back (it can also be made from wicker);
  • ropes, chains or cords for hanging the finished structure from the ceiling.

It will be useful for beginners ready-made diagram cocoon, which allows you to correctly calculate the dimensions of the future chair.

When manufacturing, follow the instructions.

  1. Cut the vine, peel the bark and steam it, then beat it thoroughly. These manipulations will provide her with the flexibility necessary for weaving.
  2. Then proceed to forming the frame of the future chair. You can do it from metal pipes or a slightly flattened hoop if the final shape of the product should be oval. If using a pipe, connect its ends using inserts.
  3. To the pipe, which acts as a frame base, attach all the remaining elements one by one. If the chair is mounted vertically, use rods 6–8 mm thick, the length of which should exceed the height of the chair by 250–400 mm.
  4. Attach each of the rods to upper parts frame so that a gradual separation is maintained between them. In the middle of the back the distance should be 20 - 25 mm.
  5. By bending the rods, give the future chair depth and shape. Make sure that they are reassembled at the bottom of the structure.
  6. When using horizontal rods in the process of creating a frame, secure them to the sides of the workpiece. Install them at a distance of 20–25 mm from each other, then give them the desired shape.
  7. To secure the vine, carefully bend it through the pipe in the direction from inside outdoor chairs. Secure the ends with a rope.
  8. Weave the finished structure with thinner rods, moving from bottom to top.
  9. If you need to braid the frame from horizontally fixed rods, start work from the middle of the back in both directions. Bend the end of the rod that is on the pipe and twist it around the base.
  10. Press each new layer of thin twigs as hard as possible against the previous one.
  11. Braid the entire basket. Bend the end of the last rod, tuck it in and securely fasten it in the main weave.

To give additional comfort to the seat of such a chair, you can use a thick pillow.

You can braid the frame different ways. Suitable for beginners simple techniques, providing a firm seating base.

Simple twig weaving techniques - gallery

Even beginners can cope with such weaving Various schemes weaving can be used to make hanging rocking chairs Using twig weaving you can create a dense base for a chair

How to make a nesting chair with a knitted bottom

To create a nest chair that will become an exquisite decoration for your apartment or garden, you need to prepare the following materials:

  • metal hoop with a diameter of 90 to 110 cm, a cross-section of at least 35 mm;
  • 700–800 m of polyester cord with a diameter of 4.5–5 mm;
  • crochet hook No. 8–9;
  • slings - 12 meters;
  • roulette;
  • scissors.

Wrap the hoop used as a base with strong twine, securing every tenth turn with a knot; this will prevent the cord from unraveling.

To create the bottom, you can use a variety of crochet techniques. To make such a seat you will need from 120 to 160 m of cord. The exact quantity depends on the knitting pattern chosen.

  1. Start working from the center. Knit the circle as tightly as possible using single crochets and chain stitches.
  2. Start forming the seat with 6–7 circles, after which move on to the back in the form of a knitted mesh.
  3. Stretch the finished napkin onto the hoop, spreading it evenly over the entire base. The resulting structure should not sag. Attach to the hoop from the side of tight knitting, without cutting the cord.
  4. Attach slings to the finished product.

Making a seat using the macrame technique

For this version of a hanging chair you will need:

  • 7 threads of 6 m;
  • 4 threads of 5 m;
  • 4 threads of 4.5 m each;
  • 2 threads of 4 m;
  • 2 metal hoops with a diameter of 90 and 110 cm.

Having prepared the cords of the required length, proceed to attach them to the hoop.

  1. Starting from the center, fasten 7 long threads in pairs at a distance of 6 cm from each other.
  2. Continue fastening the threads along the sides of the warp. As a result, on one side there should be 2 threads of 5 m each, 2 threads of 4.5 m each and 1 thread whose length is 4 m.
  3. Then start weaving the pattern from the center of the workpiece.
  4. As a result of your work, you should get an openwork circle.
  5. To prevent the cable from moving in a circle, secure each thread with a flat knot.
  6. When knitting, maintain tension at all times, placing knots at 6 cm intervals.

If it is necessary to create a fringe, the length of the threads should be increased by about a meter and, at the end of the work, do not cut the remaining cord.

Additionally, equip the resulting structure with reliable slings and a soft cushion.

Hanging hammock chair using macrame technique - video

Hanging mounting options

Attaching a hanging chair can be done in different ways. One of the options - ceiling mount on the hook. Ready product, suspended in this way, can swing in different directions, but moving it to another part of the room is very problematic.

This method can only be used if there is high-quality concrete floor or when coffered ceilings allowing fastening directly to the beams.

No less popular is mounting to a stand, which can be purchased in specialized stores. This design is equipped with circular platforms that provide stability. The chair on the stand can be easily moved around the apartment and even taken outside.

Another option is axial fastening, which allows you to fix the structure between the ceiling and the floor. This method is suitable for decorating children's rooms.

If the ceiling in your home is not reliable enough and is hollow, you can install a hanging chair using a chemical anchor. This method involves injecting a polymer paste into the ceiling cavity from a syringe, after which the product is installed.

Simple options for making a hanging chair at home are available even to novice craftsmen. Unusual designs decorate the interior, give the room originality and comfort. Good luck with your work and have fun creating!