Stairs. Entry group. Materials. Doors. Locks. Design

Fences made from mesh are very popular; they are indispensable in cases where you need a reliable fence with good light transmission and a low price. In addition, modern fences made of welded galvanized mesh are very attractive, durable and easy to install with your own hands.

Classical country fence made of galvanized welded mesh

Advantages of galvanized mesh

They produce galvanized mesh from metal wire. Its rods are arranged perpendicularly and are fastened at the connection points by welding. The cells of the welded mesh are made rectangular, square, less often diamond-shaped, trapezoidal or other shapes. The wire for the mesh is galvanized or with additional polymer coating.
Fencing made of welded galvanized mesh has its advantages:

Types of welded mesh fences

Depending on the type of coating, it is presented in the following types:

Galvanized mesh can also be produced in the following types:

Drawing of a galvanized mesh fence section

How to choose a galvanized welded mesh fence

Features of installing a fence made of galvanized mesh

There are two ways to install galvanized mesh:

• Tension of the fabric between the pillars;
• Installation of sections.

The first option is cheaper and easier to do yourself. But the second option is considered more aesthetically pleasing and stronger.

If you do not purchase ready-made welded spans, you will have to make the sections yourself from angles or profiles.

Fence posts can be either or. Of course, if you build thoroughly, you should use steel supports with a cross-section from 6 to 12 cm.

Installation of pillars

Installation of mesh on supports

To tension the rolled mesh, hooks are welded onto the posts. Also, special poles with hooks can be purchased ready-made.
The galvanized mesh is hooked onto the first post and stretched with tension to the next support and put on the hooks again.

One of the options for attaching fence sections to posts

To make a galvanized mesh fence stronger, a wire with a diameter of 4 mm is threaded through its top and bottom. The wire is welded to the post.
It is difficult to pull the mesh evenly with your own hands, so it is advisable to invite an assistant and, by threading a crowbar or rod through the bottom and top of the welded mesh, pull them. After installing the fence, the hooks are bent.
A sectional fence is either welded to posts or secured using pipes and clamps.

If you want to save money, you can make a fence from welded mesh with your own hands. This design is suitable option both for a summer residence and for a private home. However, you first need to choose a material, since it should be understood that welded mesh can be of several types. The quality of the entire product will depend on the material chosen.

You should be aware that not all types of fencing can be installed between closely spaced areas. This is due to the fact that monolithic structures high altitude shade the space. Considering the small size modern dachas, then you should understand that in this case almost all the plants in the garden will grow sluggish. For this reason, there will be constant complaints from owners of neighboring plots. The solution is to use a mesh that is not an obstacle to the light of the sun and air masses.

A mesh fence can be used not only at the dacha, but also to fence off sports facilities, technical areas or reservoirs.

Today there are the following types of grids:

1. Galvanized mesh. A layer of zinc is applied to steel parts. This is done before or after welding. This best option if you want to get a durable structure for little money.
2. Non-galvanized mesh. This material is the simplest and requires minimal cash costs. This product is made of steel. The diameter of the rods is approximately 1.2-7 mm. The disadvantage is that this product is not coated. This a big problem, since there is no protection from influence external factors.
3. Galvanized product with a special coating. This option is durable. The only drawback is the high cost.
4. Product with polymer coating. Has protection against corrosion and other factors.

How to mark your own site?

First of all, you will need to install temporary pegs in the corners of the area, between which the thread will be stretched. The length of the cord will be the length the desired mesh, however, it will need to be purchased with a margin of several meters. After this, you should designate the places where the columns will be placed. The recommended distance between posts is 2-2.5 m. If you do longer distance, then the grille may begin to bend.

You should know that on a site with a large slope it will not be possible to install a mesh fence, since it is impossible to securely fasten the material at an angle.

In this case, the only way out is terracing the area, which involves installing columns of greater length and strength in places where there is a difference. On one side of the column the grid will be fixed at a level above, and on the other - below. To do this, the mesh will need to be cut into individual elements. If it is not possible to do this, then you can install a sectional fence for your summer cottage.

At the moment, there are two ways to build a mesh fence. The first method involves tensioning the lattice between the posts. To implement the second method, you will need to make metal corners, into which the lattice elements will be fixed. The first option is easiest, but it should be noted that it is less durable and aesthetically attractive.

To manufacture the sections, additional costs will be required. The cost of the corner can significantly exceed the cost of the mesh itself.

In all cases, installation of a welded mesh fence involves the use of posts. These elements can be constructed from metal or wood. The first option is budget and affordable. However, you should buy supports made of wood only if their cost is several times less than a metal product. Also wooden structures suitable if you only need to install a temporary product.

There are also situations when material remains after the construction of a private house, but there is no desire to throw it away. In order to exclude extra costs, you can apply the existing columns.

Metal posts will last for many years. The most commonly used support elements are square section, their diameter ranges from 7 to 12 cm. The thickness of the tube wall should be more than 2 mm. If you want to save money, you can purchase the material at a scrap metal shop, where excellent pipe options are often found.

Return to contents

How is a mesh fence installed?

For work you will need a screwdriver, a building level, a tape measure, a bayonet shovel, and pegs.

If you have decided to install a mesh fence, then the first step is to prepare everything necessary tools and materials. To work you will need the following elements:

• metal pillars for the construction of a frame structure;
• elements for fastening posts (bases, clips for connection, brackets with nuts and bolts and clamps U-shaped);
• roulette;
• water;
• screwdriver;
• pegs;
• cement mixture;
• building level;
• concrete solution for the base of each column;
• sand;
• rope;
• a bayonet shovel, with which you can dig holes for posts.

Return to contents

Sequence of actions for installing the fence

To install a welded mesh fence with your own hands, you need to perform the following steps:

1. The first stage of installation is marking. The perimeter is preliminarily outlined and the location of the fence is indicated. You can measure the distance between the holes using a tape measure. The distance from one column to another is equal to the width of the sheet, but you should take into account the diameter of the column and the margin for the base. For example, with a cut width of 2 m and a column diameter of 10 cm, the distance between the supporting elements should be measured to be 2.18-2.2 m.
2. At the next stage, holes are dug. Their diameter should be 1-3 cm larger than the diameter of the posts. Here it is important to take into account the base made of concrete or cement. This must be done using a drill. If this device is not available, then you can use an ordinary bayonet shovel. The depth of each hole should be approximately ¼ of the length of the post. However, the depth of soil freezing should also be taken into account. The larger it is, the deeper the holes should be. In most cases, columns with a height of 2 m are prepared. In Russia, winters are quite severe, therefore approximately 15-20 cm must be added to 50 cm (¼ the height of the supporting element). In this way, the depth of one hole can be obtained.
3. On at this stage The support columns are being installed. You need to pour a mixture of cement into the hole. To prepare it, you need to mix one part water with one part cement mixture and three parts sand. Next you need to insert a column. It should be noted that in some cases it is placed in a special base. The column is aligned using building level. You need to hang the tool on the top of the post and make sure that the level is perpendicular to the ground and parallel to the supporting element. Next, you need to fix the device with spacers and wait until the base hardens.
4. After approximately 24 hours (this time, on average, it takes for the base to harden), you can begin installing the mesh. It should be fastened using special fastening elements or U-shaped clamps. To fix it you need to use a screwdriver. It is recommended to fix the mesh in several places of support. If the mesh is not cut into sheets, but is secured in a roll, then staples should be used for this. Particular attention should be paid to fastening elements, since the reliability of the entire device will depend on them.
5. Finally, the mesh fence will need to be painted with moisture-resistant paint.

Are you planning to make a fence from welded mesh with your own hands for a summer house or private home? You need to know some of the features and rules for installing this structure.

Despite its low cost, a welded mesh fence is durable and provides good protection from penetration.

How to choose a welded mesh for installing a fence

So, you started at your dacha or your plot of land and lean in favor of this material. Such a fence - great option both for home and for the garden. But first, you should make a choice of material, since welded mesh for a fence can be different. From specific type depends on the quality of the design.

A sectional fence made of welded mesh is lightweight, durable, and resistant to various adverse weather conditions.

• Non-galvanized mesh. This is the simplest and least expensive material. This mesh is made of steel. The diameter of the rods is approximately from 1.2 to 5-7 mm. But lack of coverage means vulnerability to negative external factors.
• Galvanized mesh. A layer of zinc is applied to the steel elements. This is done either before welding or after it. If you have started a not too expensive construction of such a fence for your dacha or house with your own hands and are counting on the durability of the structure, then this option is optimal.
• The polymer-coated mesh is protected from corrosion and other factors.
• Galvanized mesh with polymer coating is the most durable, strong and quality option. But the price of such a fence will be higher.

Installation of a welded mesh fence: tools and main steps

If you decide to install a mesh fence for your dacha or home, then first of all stock up on everything necessary tools, materials and devices.

So, you will need:

The pillars should be located at the same distance from each other, and it is also desirable to have the same height.

• metal posts for the frame;
• fastening elements for posts (post bases, connecting clips, brackets with nuts and bolts or U-shaped clamps);
• screwdriver;
• concrete or cement mixture for the foundation of each pillar;
• rope;
• roulette;
• pegs;
• building level;
• a drill or bayonet shovel for digging holes for posts;
• sand;
• cement composition;
• water.

Installation sequence.

Installation of any fence begins with marking and setting out the fence line using pegs, rope and tape measure. You will need a professional level to install the posts.

1. Where to start construction? The first of the welded mesh is marking. Use pegs and rope for this (and first outline the perimeter, marking the location of the fence). You need to measure the distance between the holes using a tape measure. The distance from one pillar to another will be equal to the width of one sheet, but you need to take into account the diameter of the pillar and the margin for the foundation. For example, with a cut width of 2 m and a pillar diameter of 10 cm, measure the distance between the supports to be 2.15-2.20 m.
2. We continue to build a fence from welded mesh with our own hands. Now you can start digging holes. Their diameter should be 1-3 cm larger than the diameter of the pillar (taking into account the concrete or cement foundation). The most convenient way to do this is with a drill, but if you don’t have one, a bayonet shovel will do. The depth of one hole should be approximately a quarter of the length of the post. But take into account the depth of soil freezing (the greater it is, the deeper the holes will be). Typically the pillars have a height of 2 m. middle lane Russia's winters are very harsh. it turns out that 10-20 cm should be added to 50 cm (a quarter of the height of the support). This will be the depth of one hole.
3. Now you can begin installing the support pillars. Pour into the hole cement mortar. To prepare it, mix one part water with one part cement mixture and three parts sand. Then insert the post (some people place it in a special base). Level it using a level (hang it on the top of a post and make sure the level is exactly perpendicular to the ground and parallel to the support), secure it with spacers and leave the base to harden.
4. After about a day (this is the time it will take for the foundation to harden), you can begin installing the mesh. It can be installed using special fastening devices (brackets, clips, etc.) or using U-shaped clamps. Use a screwdriver for fastening. It is better to fix the mesh in two places of support, and for greater strength even in three. If you do not cut the mesh into sheets, but fasten it in a roll, then use staples for this. Pay attention to fasteners Special attention, because the durability and strength of the structure depends on it.
5. The construction of the fence with your own hands is completed by painting it, although it is not necessary.

A fence made of welded mesh has become an excellent alternative to chain-link mesh in our time. Such a fence is not inferior in quality and durability to other options, and it is much easier to install and maintain.

In addition, a fence made of rolled welded mesh looks quite decent. It doesn't block access sunlight to the site, but will protect your property from uninvited guests.

You can order the installation of roll fencing from specialists. You can do this at http://sitka.com.ua/ru/zabory/. Our specialists will take measurements themselves, select materials and install the fence in a short time.

You can also try to make your own fence from welded mesh. The installation technology is not too complicated, so it won’t be difficult to handle.

Why is welded mesh fence popular?

If you do not plan to enclose the area with a solid fence, then welded mesh will be the best solution for you.

• It is affordable.
• Has light weight.
• The mesh lasts a long time and is highly durable.
• Installing a mesh fence does not take much time.
• The installation itself is simple.
• The mesh does not interfere with normal air circulation and lighting of the area.

We can say that a welded mesh fence is optimal ratio prices and quality. Quite a budget option for fencing suburban area or dachas.

The mesh itself is an interweaving of thin, strong wire, which, at the points of fastening, is welded in a spot manner. When choosing, you should pay attention to the thickness of the wire and the size of the weaving cells.

The thicker the wire and the smaller the mesh, the stronger the fence. Also take into account the manufacturer’s classification, which will help you choose a material suitable for specific operating conditions.

• Galvanized mesh is very strong and durable, it is not afraid of water, and it retains its original appearance for a long time. appearance.
• The polymer-coated mesh is additionally protected from damage and exposure to adverse weather conditions.
• Galvanized mesh with a polymer coating is the most expensive material, but it is doubly protected.
• Finally, non-galvanized mesh is a budget option; it is better to paint it thoroughly after installation so that the fence lasts longer.

The fence itself can also be of two types. A tension fence is a mesh stretched around the perimeter of a site, reinforced with pillars.

A sectional fence is much stronger, but its installation is also more expensive and labor-intensive. In this case, the mesh is stretched to metal carcass, and the fence itself consists of sections.

Installation of a tension fence made of welded mesh

Installing a tension fence is the easiest option. Your task is to stretch the mesh between pre-installed metal posts and secure it.

Supports are installed every two meters of the fence. The installation process itself consists of several stages:

• Markings are applied along the perimeter of the site and a construction rope is pulled to ensure accurate installation.
• Mark the installation locations for the supports. At the site of the support, a hole one meter deep is dug. You need to pour crushed stone and sand at the bottom.
• A post is installed in the hole and buried with soil. If we're talking about O metal poles, instead of soil, it is better to use concrete mortar.
• After installing the posts, you can begin tensioning the mesh. It is best to do this from the corner of the site. The end of the roll must be carefully attached to the first post to ensure sufficient tension.
• The roll unwinds to the next support. Here, at the required mark, a metal rod is inserted across the entire width of the material. Then the entire structure is attached to the support with clamps.
• In this way, the mesh is stretched along the entire length of the fence.

When attaching the roll to the first post and further attaching the mesh to the supports, it is better to use thin metal rods. This will allow you to avoid further deformation of the material and sagging of the mesh in the spans.

Don't forget to paint the supports after installation to protect both them and the mesh from corrosion.