Finish for country house– one of the most important stages in creating stylish, comfortable suburban housing. Not only the cozy atmosphere depends on how your home is decorated inside and out. The materials used to decorate the interior of a country house must be of high quality, environmentally friendly, and fireproof. Also, the finishing and cladding of the building should be arranged in such a way that during the cold season the house “cools down” as slowly as possible.
Beautiful and high-quality exterior decoration for a country house, facade design is, one might say, one of the main “calling cards” of every homeowner. This reflects his aesthetic taste, reasonable savings, and a rational approach to home improvement and repair issues. Fortunately, modern materials for finishing the outside of a dacha, they provide enormous scope for creativity, allowing you to perfectly combine “aesthetic” and “practical” in one design solution.
Among the undoubted leaders in exterior decoration for a country house is, undoubtedly, siding. Finishing a country house with siding is one of the most affordable financially options. Siding is easy to install (if you have certain knowledge and skills, this work can be done independently). This material allows you to quickly “sew up” the outside of a country house, reliably hide the insulation, and literally transform an old building in just a few days. The siding is attached to a special profile, and manufacturers guarantee that such finishing will reliably serve from 20 to 35 years.
Another option for how the façade finishing of a country house can be done is to use a material called “block house”. This is a natural material that, when covering the outside of a country house or cottage, gives the feeling that the building is made of real logs. There is also a similar material, which in its external characteristics is a copy of timber.
Exterior decoration in a country house can also be done using facing bricks. The cost of this type of façade design is quite high (significantly higher compared to, for example, siding) - however, the service life is also brick finishing a lot more. The decor of the facade with facing brick is stylish, solid and expensive. And if finances allow, you should opt for just such a solution.
External finishing of a country house can also be done using special facing tiles for facade works. Experienced builders can decorate any building with tiles so that it looks like a work of design art. This, of course, is also not cheap.
Exterior decoration today is often made from natural wood. But in this case, make sure that the tree is reliably protected with special compounds from moisture, pests, and direct sunlight.
It all depends on two important factors- your aesthetic taste and, of course, the amount that you are willing to spend on decorating the facade of your dacha.
Another relevant and striking option is imitation half-timbering. Modern high-quality material makes it possible to make the dacha look like a European medieval mansion. DSP or OSB panels are used for this: they cover the facade, then plaster it, and then attach it decorative elements from a board that imitates timber. The last step is painting the facade with a special composition with protective and decorative properties.
And finally, finishing for a country house can be done by plastering. You can perform traditional plastering work followed by painting the outside of the house, or for very spectacular finishing use decorative plaster, which is so fashionable today.
Which option to choose from the above is entirely up to you.
What materials to choose for interior work? It should be remembered that interior decoration for a country house should be carried out only after all communications have been laid, wiring has been completed, and engineering equipment has been installed.
There are several popular ideas on how interior decoration for a country house can be done. Always relevant natural materials: especially wood. In this case, the premises of the country house will be covered with clapboard or block house. Such materials can be installed in different ways: for example, a block house is usually placed vertically, but you can install the lining as you wish - both vertically and horizontally.
In a timber country house, as well as in frame house Wall decoration can be done using OSB sheets or plywood sheets. After the building is sheathed from the inside with such sheets, you can begin painting the walls or wallpapering the rooms. You can experiment by combining interior paint, wallpaper and lining in one interior solution.
In the bathroom, as well as in kitchen areas, ceramic tiles are often used for finishing work. If finances allow, you can replace ceramics with marble, if the budget is as limited as possible, tiles in the bathroom and in work area in the kitchen can be replaced with plastic. This material cannot be called environmentally friendly, but its undoubted advantage (besides the price, of course) is its ease of installation, as well as dismantling. You can remove old panels at any time and replace them with new ones using the same frame, whereas dismantling and reinstalling tiles requires a lot of time, effort and financial costs.
If the dacha is made of stone or brick, you can use other options: traditional - plaster followed by fine finishing, modern and fast - drywall. However, when working with drywall, we must not forget that this material (due to the installation of the frame) significantly “eats up” the space in the rooms. Therefore, for a small dacha, a more costly and labor-intensive, but also more familiar option - plaster - will still be relevant.
Finished floors in the country can be laid from solid floorboards or pine boards, followed by painting. In the bathroom, as well as in the hallway and kitchen, you can install floors made of special floor tiles (ceramic granite). It is also possible, if funds allow, to install a “warm floor”: such a system can be either water or electric.
As for the ceiling, the most relevant option for a summer house may be lining. You can also use:
Watch also a video about decorating the interior and exterior of a country house:
When choosing materials for finishing your dacha, make sure that the finish is not only beautiful, but also as environmentally friendly as possible. Have an easy and successful repair!
Finishing work will have a long-term effect, provided that materials for walls, floors and ceilings are selected correctly. The information provided below will introduce you to the main factors influencing the quality of interior decoration country house with periodic and permanent residence. The article talks about all types of finishing materials: plaster, paint and varnish, rolls, tiles and slats; as well as about the main styles of living room decoration.
Living room interior of a country house Source yandex.ru
Most owners of country houses strive to create a comfortable, relaxing atmosphere in their homes. Whether the house will delight you with coziness is largely determined by the choice of method of finishing the walls. Until a few decades ago, interior decoration consisted of plastering the walls; then the walls were painted or wallpapered. Today the construction market is filled with a variety of finishing materials, and you have every opportunity to create an original design.
When comparing finishing options, it is important not to forget about the type of walls in your home, since what they are made of determines the choice of finishing material. The interior decoration of a country house is also carried out taking into account some additional factors, which include:
Seasonality factor. If you visit your dacha in the summer or on weekends, most likely the house does not have constant heating. In this case, for finishing it is worth choosing materials that can withstand high humidity and low temperatures.
Country style living room Source museum-design.ru
Style factor. For different interior styles, certain materials and colors are preferred.
Time factor. If you don't like it frequent repairs, it's better to stop at high-quality finishing in natural shades. If you love change and start renovations every few years, think about budget materials that allow you to do it quickly (plaster, drywall, wallpaper).
Preparation factor. It is necessary to carefully calculate (and not estimate) the amount of material needed. This simple rule will save you from unexpected work stoppages and additional expenses (which is very unpleasant).
Order factor. Finishing of internal surfaces is considered finishing work. To do this, you should wait until the installation of electrical wiring and plumbing is completed.
How often are you willing to do repairs Source nhnieuws.nl
The interior decoration of the dacha is carried out taking into account the type of walls, seasonality and personal preferences of the owners. If the house is used periodically, the following options will be preferable:
Brick walls. It is not prohibited to use any type of finish here. Classic way To give a brick wall a spectacular look, use wet plaster. It must be remembered that without constant heating, condensation will form on the brick surface; in this case choose moisture resistant plaster on a cement base.
Walls made of foam concrete blocks. Foam concrete is known high level water absorption. This feature cannot be ignored, so a deep penetration primer is applied to the walls in several layers, strengthening the porous base and reducing paint consumption. The next step will be gypsum plaster and painting with vapor-proof paint.
Installation of sheet plasterboard on foam concrete Source besplatka.ua
Aerated concrete walls. For their finishing, lining, gypsum plaster, and drywall are preferred. In areas with long winters, a layer of thermal insulation will not hurt.
Frame walls. The surface is covered with OSB (multilayer oriented strand boards). This will help increase the strength of the wall and improve heat and moisture resistance. The finishing touches on the inside of the dacha are done with paint; wallpaper can be used instead.
Walls made of profiled or laminated timber. If you want to improve sound and heat insulation, suitable Wall panels, lath materials and drywall. Natural wooden walls are usually left in their original form, covered with wax or varnish, unless the design requires a different solution. You should also remember about the shrinkage of the wooden structure, and do not rush into finishing until this natural process is completed.
Log walls, rounded timber. They also do not require special finishing.
Log walls are magnificent in their natural form Source yandex.ru
If the family plans to live in country house year-round, the interior design possibilities expand significantly. In this case, the finishing is chosen based on the type of construction (wall material), purpose of the room and the allocated budget. To decorate the walls of premises, you can use materials from the following groups:
Plaster can perform two functions: protective and decorative. There are two types of plaster, differing in execution technology. The first is wet (monolithic) plaster, a plastic aqueous solution of several components. The second type is dry plaster, produced in the form of gypsum boards (GCP), wall and ceiling.
Application of decorative plaster Source ueni.com
There are several advantages to using wet plaster. It allows you to qualitatively level the wall surface, correcting minor defects. Thanks to coloring, you can easily get the desired shade of the coating, which (another plus) will be very durable. The disadvantage can be considered the plastering process itself - lengthy, requiring maintenance special conditions indoors until dry. Mixtures on water based are divided into two types:
Ordinary plaster. Depending on the composition, there are cement, lime and gypsum plaster. All of them are used to level the surface, after which the selected finish is applied to the prepared base. Depending on the specifics of the design, this could be wallpaper, tiles, paint or another layer of plaster, this time decorative.
Decorative plaster. Finish coating, creating the effect of a natural texture on any surface - marble, velvet or leather. Popular acrylic varieties are intended for protective and decorative treatment in rooms with increased content water vapor.
Types of decorative plaster Source mit.ru.net
Liquid wallpaper. They are a type of decorative plaster and are used for walls and ceilings in any dry rooms. The mixture contains natural fibers (cellulose, cotton or silk), high-quality dyes, additives (quartz chips, glitter).
On our website you can find contacts of construction companies that offer turnkey design and construction services for country houses. You can communicate directly with representatives by visiting the “Low-Rise Country” exhibition of houses.
Paint and varnish finishing materials are the most extensive and popular group for finishing the interior of a dacha; they are usually divided into the following groups:
Water based paints. Safe for humans and environment, they are great for interior work; also have other undeniable advantages: they dry quickly and are odorless.
Water-dispersion paints. The composition contains synthetic polymers, which does not prevent them from being diluted to the required consistency with ordinary water. Thanks to the wide range (as with water-based paint), they are the most popular in construction.
Water based paints are ideal for wooden walls Source uk.aviarydecor.com
Oil paints. Although budget, it is not the best option for finishing. The composition includes drying oil, which means a pungent odor, long drying time and relative fragility: over time, the paint fades, begins to crack and peel.
EnamelspaintAnd. They are rarely used for finishing walls in the countryside due to the persistent pungent odor and compositional characteristics - high toxicity and fire hazard.
Varnish. Varnish coating valued due to its spectacular appearance and sufficient wear resistance, therefore it is often used for finishing wooden surfaces. However, the varnish is toxic and a fire hazard; When varnishing walls, care should be taken to ensure good ventilation.
About the choice of paint and varnish materials for the interior in the following video:
This category includes a wide range building materials. All of them, despite differences in composition, quality and performance characteristics, are widely used for finishing. An impressive list allows you to choose an option for every taste and budget; The tile group includes:
Particle boards (chipboards). They are used as the basis for wall decoration and for making subfloors. The boards have limited moisture resistance, which is why they are used mainly in dry rooms (or are additionally protected from moisture). The slabs are mounted on the sheathing or directly on the wall if it is made of timber.
OSB boards (oriented strand). Compared to chipboard they are superior in strength and moisture resistance; They are used in flooring and as a base for any type of cladding.
Plywood. A budget material with decent sound insulation and moisture resistance, which allows it to be used for cladding kitchens and bathrooms. If you're not crazy about the natural look of plywood (although it can look quite stylish when used correctly), finishing can include painting or wallpapering.
OSB boards in the interior of the room Source budowlancylondyn.co.uk
Polymer tiles. A proven material known for its strength and excellent steam and water resistance; The only limitation is that the tiles cannot withstand high temperatures.
Ceramic tile. An excellent proven material, durable, waterproof, non-flammable and aesthetically pleasing. The convenience of ceramics is that it can be used to cover any surface, from plaster to chipboard and OSB boards. You just need to choose the appropriate glue.
A natural stone. An ideal option, suitable for both floor and wall finishing (usually partial). Natural stone, be it slate, granite or marble, has a common significant drawback - they cannot be called a budget option.
Fake diamond. A worthy replacement for its natural analogue. On construction market You can choose a material of any texture and natural color. Tiles that imitate stone can have a different base - cement, acrylic, gypsum or quartz.
Combined finishing using artificial stone Source npstone.kz
Pasting walls with roll materials, among which the most popular are wallpaper, is considered the most in an inexpensive way interior decoration. The main thing to do before gluing is to level the walls. Despite the stunning variety of colors and textures, rolled materials can be divided into several types:
Paper wallpaper. They are used for gluing walls and ceilings in all rooms, except wet ones. Thin single-layer wallpaper (the most budget option) and multi-layer non-woven wallpaper are on sale. The non-woven base thickens the material and helps hide minor surface defects.
About the types of decorative plaster in the following video:
Washable (moisture-resistant) wallpaper. The top layer ensures the strength and resistance of the wallpaper to water and detergents. This protective and decorative coating is made of vinyl, fiberglass or acrylic; There are wallpapers with a cork top layer coated with wax. Washable wallpaper serves as a practical finishing method; they are often used as an alternative to tiles. This material is used to cover the walls of the kitchen and dining room, hallway and corridors; Can be used in the bathroom.
Cork wallpaper. Textured and environmentally friendly cork wallpaper is one of the elite finishing materials; They are most often used to decorate living rooms and guest rooms. Wall mounted cork covering made from natural bark balsa wood, improves sound insulation; it can be installed on surfaces with complex shapes (convex). Panel and roll material is available on sale.
Cork wallpaper in the interior of a country house Source yastroyu.ru
Wallpaper made from other plant materials. This wonderful decor with a natural base can completely transform the interior. Floral wallpaper, in addition to cork, is made from bamboo, reed, and jute. In veneered wallpaper, the base is non-woven or cellulose, and the top (decorative) layer is a thin cut of valuable wood. Environmental friendliness and design capabilities are somewhat offset by the high cost.
Film roll materials. Two-layer finishing films with a paper base and a top PVC coating, which can have a texture (isofilm and foam). A high-quality, but completely airtight option, which limits its use to technical rooms (storages), corridors, and bathrooms.
About choosing wall panels in the following video:
Most dachas are used in warm time year, and in winter it is heated periodically, which negatively affects the wallpaper and plaster. The best solution For interior design will become rack materials, which include:
Wooden lining. The surface covered with natural wood paneling is aesthetically pleasing; the material is environmentally friendly, durable and has many color and texture options. Before finishing, the lining is treated with an antiseptic; upon completion of the work, if the style requires it, the walls are varnished or painted.
PVC panels (plastic lining). A budget replacement for a wooden counterpart, a practical and unpretentious finishing option that is not afraid of high humidity and is easy to maintain. Despite all the advantages, PVC panels are used mainly for finishing the ceiling of small rooms - they can be seen in the bathroom, kitchen and hallway.
MDF panels. Inexpensive material for which you do not have to first level the surface of the walls. You can choose flat or relief panels, With front side, decorated with wood veneer or colored polymer film.
Lining in a modern interior Source d-holdid.ru
Among the popular methods ceiling decoration includes the following methods:
Natural massif. The ceiling is finished with clapboard, block house or imitation timber; Suitable wood is both coniferous and deciduous.
Drywall. Using this material you can perfectly level the ceiling or create a complex multi-tiered structure.
Stretch ceiling . Ceilings in dachas are increasingly being decorated in this way, which has many advantages: it is installed quickly, has an ideal smooth surface, is moisture resistant and allows you to hide unevenness and communications.
About interior decoration wooden house in the following video:
Floor finishing is carried out using the following materials:
Wood. Eco-friendly, heat-retaining and therefore a common finishing method, indispensable for some interior styles. A budget option is regular and tongue-and-groove boards, while a more sophisticated and expensive option is parquet boards.
Ceramic (tile) tiles. A practical choice for use in rooms with high humidity - in the bathroom and kitchen, as well as in the hallway or hall.
Laminate, carpet. Common in suburban housing with year-round accommodation. The variety of colors and textures available on the construction market allows you to choose the material to suit any style.
Linoleum. A practical and inexpensive floor finish, which has one limitation - it cannot be laid on heated floors.
Tiled floor in the kitchen Source sklad-keramiki.com.ua
The interior design of a house is often determined by this, the largest room in area. The family spends their evenings here, and guests are invited on holidays; Therefore, the design of the living room is chosen especially carefully - because it sets the tone for other rooms. For the living room of a country house, one of the following styles is mainly chosen:
Classical. This decoration is designed to emphasize both the status and excellent taste of the owners. The walls and floor of a classic living room are lined with natural wood, which gives the room a luxurious, aristocratic look.
Rustic. Such trends as country and chalet are united by the possibility of using them in wall decoration textured plaster, dark and light lining. Provence style makes it possible to decorate walls with wallpaper delicate shades with floral motifs or cover wooden surface light (even white) paint. A large living room can be zoned using several styles for visual separation.
Living room in Provence style Source it.aviarydecor.com
Eclecticism. You can mix different materials, from brick and stone, to bamboo wallpaper or wood and plastic panels. In this way, you can combine a wide variety of styles, for example, loft and oriental, or Provence and modern.
The choice of materials for interior decoration should be approached carefully; this affects the service life of a country house and the frequency of repairs. To achieve a high-quality result, saving a lot of time and resources, it is better to choose materials and cladding methods that provide not only a decorative, but also a heat-saving effect. The technique of combined finishing can help with this, when different materials and textures are combined in the design of one room.
From this article you will learn:
A dacha is not only a place to relax from the noise and hubbub of a big city, but also a place where you can deeply inhale the fresh and fresh air. Naturally, they are optimally suited for finishing a country house. environmentally friendly materials, which will maintain comfort and will not get out of natural style. What material is best to use for finishing walls in a country house? We'll talk about this in our article.
For many, a dacha is a place of serene relaxation, so the atmosphere in a dacha house should be appropriate, cozy and comfortable. The quality of wall decoration in rooms plays a big role in creating comfort. Several decades ago, the choice of facing materials was extremely limited. In most cases, the walls were plastered and then painted or wallpapered. Today, the range of materials for finishing walls in a country house is so wide that it is sometimes difficult to make a choice. The stores offer everything you might need to bring your original design to life.
When deciding on a finishing option, first of all pay attention to what the walls themselves are made of. This will largely determine the final choice of facing materials. In addition, a number of other important factors need to be taken into account.
If your dacha is not used year-round, then pay attention to the material from which the walls themselves are made. The finishing of the walls in the dacha will depend on this.
In a house with year-round use, the walls can be decorated with almost anything. The possibilities are limited by the budget, the material from which they are made, and the functionality of the room. All materials for finishing walls in a country house can be divided into several groups.
Plaster materials are multifunctional - they simultaneously protect the walls and decorate the room. Plaster can be dry or wet, respectively, and work with different types plasters in different ways. Wet (also called monolithic) is a plastic mass made from a multicomponent mixture and water. Dry plaster is, in fact, gypsum plasterboards, which come in wall and ceiling types.
First let's talk about wet plaster. She has a row undeniable advantages. Firstly, wet plaster allows you to correct minor wall defects. Secondly, wet plaster is very durable. Thirdly, you can add color to the dry mixture and get any desired shade. But there are also disadvantages, in particular, more complex application technology. The process of finishing walls in a dacha with wet plaster is quite lengthy and requires compliance with the temperature regime both during work and after, until drying is complete. Mixtures are divided into two groups:
One type of decorative plaster is liquid wallpaper. They contain natural fibers of cellulose, cotton or silk, as well as high-quality dyes and additives - quartz chips, glitter.
Paint and varnish materials are very popular for finishing walls in the country. They are divided into several varieties.
Water-based paints are great for wooden walls.
This group includes many building materials, varying in composition, quality and performance characteristics. Materials can be both budget and quite expensive, all of them are very popular for finishing. This category of facing materials includes:
One of the most budget-friendly types of materials for finishing walls in a country house. However, the cost of cladding may increase if the walls are uneven - the surfaces covered with wallpaper must be almost ideal. All roll materials can be divided into several groups, each of which has its own pros and cons.
If you use your country house only in the warm season, then think about wallpaper and plaster second. First, consider this option for decorating the walls in your dacha, such as slatted materials.
|
Material |
Advantages |
Flaws |
Where not to use |
|
Wall decoration in the country housedrywall |
Price Easy to install |
Hygroscopicity The need for plaster |
At seasonal dachas In buildings that have not shrinked |
|
Wall decoration in the country housegypsum fiber sheets |
Price Flexibility Easy installation |
Destruction at joints Reduced vapor permeability Decrease in environmental friendliness |
In unheated dachas In houses that have not shrunk |
|
Finishing walls with laminate in the country house |
Durability |
The walls don't breathe High cost of installation and material |
In bedrooms and children's rooms |
|
Decorating walls in a country house with panelsfrom cork |
Eco-friendly Durable Aesthetic |
Very expensive |
In damp areas In boiler rooms |
|
Wall decoration with clapboards at the dacha |
Environmentally friendly material Durability Plastic Aesthetic appearance |
High price Fire hazard |
In boiler rooms In damp areas |
|
Wall decoration at the MDF dacha |
average cost Environmental friendliness High vapor permeability No deformation |
Low ductility Hygroscopicity |
In seasonal buildings In damp areas In fire hazardous areas |
|
Decorating the walls in the country house with plywood |
Plastic Naturalness Price |
Availability of glue Hygroscopicity The need to seal joints |
In damp areas |
|
Wall decoration in the country houseOSB boards |
Environmental friendliness No deformation Low cost |
Contains formaldehyde Dust when cutting |
In the bedrooms In children's rooms |
|
Wall decoration in the country houseblock house |
average cost Natural wood Aesthetic appearance |
Difficult installation on the casing |
In damp areas |
|
Wall decoration in the country houseusing glass-magnesium sheets |
Requires coverage Low vapor permeability |
In children's rooms In the bedrooms |
Many people wonder why it is necessary to insulate walls in a country house with inside? Firstly, this will make the dacha more comfortable, since even in summer the weather is not always pleasant with sun and heat. Secondly, high-quality thermal insulation allows you to significantly save on heating costs. There are many options for thermal insulation for a summer house, let's focus on one of the popular ones - foam insulation.
The technology of work is relatively simple and can be performed even by a non-professional. Do-it-yourself decoration of the walls at the dacha inside is done in the following order:
It is easy to understand that due to technological features In a country house, the lion's share of heat loss falls on the walls - this figure is almost 40%. When choosing a material for thermal insulation, consider the following characteristics:
To insulate the inside of a house, the material must be as safe and non-toxic as possible. Heat insulators made from basalt are well suited for brick walls. They can be in rolls or in the form of slabs. Expanded polystyrene materials are classified as price category"economy".
You can also use tile or rolled mineral wool for thermal insulation. A good option for internal thermal insulation finishing is a multi-layer “pie”, inside of which communications are laid. The vapor permeability of this design is very high, and for strength it is attached to the walls with special glue. The “pie” consists of the following layers:
Often the decoration of a dacha is carried out according to the residual principle, with at the lowest cost. How to make a beautiful and at the same time high-quality inexpensive repair? Oddly enough, there are such options; you can make a beautiful and cozy country house and at the same time at less cost than is usually required to renovate one room in a city apartment. They will help you visualize the options for inexpensive and beautiful finishes walls at the dacha photos posted in the article.
Idea 1. Color the whole world!
The good thing about paint is that it’s easy to apply and makes it possible to quickly and inexpensively completely renovate your interior, as well as experiment with different colors. But nevertheless, even this simple method of finishing walls in a dacha has its own nuances that you need to know about before you start painting.
Wooden surfaces can be made very impressive by leaving the wood grain visible. Give saturated color translucent paints will help you preserve the texture. Please note that only oil and alkyd paints, which are highly resistant to temperature changes, are suitable for exterior work.
And for interior work, water-based and water-dispersion paints, which are less resistant to temperature effects, but are safer from the point of view of toxicity and do not have a sharp unpleasant odor. There are more expensive paint options - silicone or silicate, but it doesn’t make much sense to paint them at the dacha, unless your house is located in a region with very high humidity air.
To reduce paint consumption and make the most flat surface, the walls need to be coated with primer. Before starting work, the walls must be dried. If possible, use a heat gun or a hair dryer; if this is not possible, wait until the walls dry naturally.
It is strictly not recommended to paint surfaces covered with mold, mildew, or rot. The paint will not kill microorganisms; they will continue their destructive work. The mold must be removed, the surface dried, treated with sandpaper, coated with an antiseptic, and only then a coat of paint must be applied. Yes, it takes a certain amount of time and effort to do everything right. But the result is worth it in any case, otherwise all the work will go down the drain, and the repair will not last very long.
Walls covered with plasterboard or plaster are painted with acrylic water-based paint. In order for the paint to last better and longer, treat the walls properly with a primer, do not skimp on this. If this is not possible, then at least go over the walls with soapy water to remove dust, dirt, and grease. But it is better, of course, to use a primer - it is inexpensive, but provides reliable adhesion of the paint to the surface.
Cracks up to two millimeters in size on unplastered walls can be hidden using latex-filled paints. Also, this paint will help hide cracks of the same size in the plaster.
Not many people risk using white paint to decorate the walls of their dacha. But those who still dare get a lot of advantages - white paint is cheaper than others, the house takes on a cozy look, and small rooms visually expand and become brighter.
Idea 2. “To be or not to be?” - a common question.
Wallpaper is used to decorate walls in a country house almost as often as paint. Let's talk about decorating walls with wallpaper.
Let's assume that you already have wallpaper on your walls and you are, in principle, ready to leave it. In this case, you need to pay attention to how tightly the old wallpaper holds. If they start to peel off a little in the corners and at the joints, then you can simply glue them back on. For strength, use a mixture of wallpaper glue and PVA in a ratio of one to six. If the wallpaper peels off all over the panel, then it is unlikely that it will be possible to save it, and is it worth it? It's easier to remove and stick new ones.
If you have decided to completely renovate your interior, it is clear that the old wallpaper needs to be removed. It happens that even flimsy-looking wallpaper in some places turns out to be tightly stuck to the wall surface. To remove them, apply a wet cloth to the problem area and run a hot iron over it. After this, the wallpaper comes off much easier.
How can you save money and still stick new wallpaper? Here are some tips that may be useful to you.
If the cost of decorating the walls in your dacha is really important to you, then do not choose wallpaper with large drawing, since in this case quite a lot of material will simply have to be thrown away as unnecessary in the process of adjusting the pattern. It is clear that from this point of view the most economical plain wallpaper or with small ornaments.
Idea 3. Interesting tiles
Oddly enough, tiles also fall into the category of materials for inexpensive wall decoration in a country house. Of course, if you are not planning to use tiles from the world's leading manufacturers with designer drawing, but choose economy class tiles in regular hardware store. You can:
Idea 4. A reminder from the past - a wall newspaper.
It would seem that what could be cheaper than the options already presented? But imagine - maybe. Perhaps the most cheap finishing walls at the dacha - this is an ordinary newspaper pasted on the wall. It needs to be coated with a layer of varnish on top for durability and aesthetics.
This option has a twist - over time it will only look more interesting, unlike, for example, wallpapering. You can not limit yourself to newspaper pages, but add sheets from atlases or even some interesting pages of books.
Materials for cladding country houses must be selected especially carefully. The cladding must protect the structure from negative external factors, therefore its quality and performance characteristics must be appropriate. Fortunately, there are enough products on the market for construction and finishing materials that are suitable for carrying out such work. Today we will look at how you can effectively sheathe a country house.
To ensure that dampness does not form in the dacha house, that it is always comfortable, warm and cozy, and that the outside of the building looks aesthetically pleasing, it is necessary to select facing materials that meet a number of basic requirements.
In order for the cladding to be effective in all respects, it must not only be secured as securely as possible to the base, but also supplemented with a whole set of layers, each of which will perform its own specific functions.
Sheathing for country houses it is necessary to select based not only on your own preferences and budget capabilities, but also on the operational characteristics of a particular material. Range similar products is huge, so choose a good, high-quality and durable option for exterior finishing a country house will not be difficult.
This is the only type of cladding that will seamlessly remove excess moisture, regardless of what raw materials the wall structures of the house are made of.
The most popular materials based on wood are:
The block house effectively imitates a rounded log. Its front side has a rounded structure. As for the imitation of timber, the specified cladding looks as close as possible to planed timber. Both types of exterior finishing must be attached to a pre-prepared, strong sheathing. After this, the coatings should be sanded and coated with special protective impregnations. Sometimes homeowners tint such trim or varnish it.
Lining for exterior finishing differs from material designed for interior work. It is much thicker and denser, but other characteristics remain almost the same.
As mentioned above, wood exterior cladding is always attached using sheathing. It is usually made of either wood or metal. If necessary, the selected insulating material is placed in the space between the planks (expanded polystyrene and polystyrene are not recommended), and then the sheathing itself is fixed.
The listed cladding materials, which are based on wood, can be the optimal solution for a country house built not only from wood, but also from foam blocks, aerated concrete or slag.
Siding is an excellent solution if you need to decorate the walls of your dacha from timber, logs or panels, foam blocks, aerated concrete, cinder blocks.
There are several subtypes of siding. Thus, vinyl products are made from polyvinyl chloride. These are strips, on the longitudinal edges of which there is a locking system on one side, and perforation for fastening on the other.
These coverings are attached to the sheathing. It is better to use a metal base, but a design made of wooden blocks treated with protective agents is also allowed.
The main advantage of vinyl siding is that it is relatively inexpensive and is very easy to install. But he also has weaknesses. Vinyl siding quickly fades in the sun, losing the brightness of the colors. It is recommended to buy panels that are not too variegated or saturated colors - such solutions will not remain attractive for a long time. This material is able to withstand a wide variety of temperature conditions, but in very severe frosts it still becomes more fragile.
Thin strips of aluminum make up metal siding. Steel can be used instead of aluminum. These products have a special protective coating. The fastening system for these products is the same as for the vinyl options.
The coating of metal siding can be polymer. These are reliable solutions that are not susceptible to fading in the sun. These materials are also not afraid of other climatic factors. But the choice of metal siding colors is poor. There is also metal siding, complemented by powder coatings. Here the range of colors to choose from is much richer, and the paint lasts for many years without flaws.
Metal siding is wear-resistant and durable. You can bend it, but it’s unlikely to break it. Installation work simple and fast. True, the aesthetic qualities of this material raise doubts among many homeowners. People think that houses decorated in this way look too industrial.
Separately, it is worth examining the features of basement siding. This is one of the subtypes of vinyl coverings. Its characteristics differ from polyvinyl chloride products: the thickness is greater, the appearance is different. This material was developed to decorate and protect the base of buildings, but today it is also used for external cladding in general.
Thanks to basement siding The façade of a country house can be built in such a way that its walls imitate brickwork or luxurious wild stone. Often the imitations turn out to be so successful that they can only be “calculated” if you touch the surface of the cladding.
This type of siding is also mounted on the sheathing. Lock systems similar here vinyl options. The only difference is that these elements do not have a rectangular structure, but the shape of a certain section of the wall with curly lines along the edges.
This is one of the current and modern coatings for outer skin and insulation of the façade of buildings. They are suitable for cladding a garden or country house. Such products began to go on sale relatively recently, but this did not stop them from gaining enviable popularity in a short period of time.
Clinker thermal plates have a number of advantages that make them popular:
The base of these coatings can be polyurethane or polystyrene foam. Clinker tiles are pressed into this base.
Panels can be either straight or angular. Mount this modern facing material on the sheathing, like the options described above. The structure can be made not only of metal, but also of wooden beams treated with antiseptics.
Cladding a private house is an important final stage of construction. And at this stage, most developers choose the cheapest finishing for the facade of the house. Why is this happening?
On the one hand, the cladding of your own home must meet all standards of reliability and aesthetics, but on the other hand, it is obvious that it should not be thrown away a large number of funds, without guarantees that such a decision will be fully justified.
Only one family in ten can afford to choose any finishing option, regardless of its high cost. The remaining 9 families, which is 90 percent of developers, are trying to save as much as possible and choose the most cheap way facade finishing, sometimes even to the detriment of functionality and visual beauty.
Going to extremes will also not be the best option. If you choose the most budget option, you may lose on the performance characteristics of the facing material. As a result, it will not withstand adverse conditions well natural conditions such as: wind, frost, snow, rain. There is a saying about this: “the miser pays twice.”
Cheap cladding of the facade of a house is quite possible, you just need to choose the most best option, the cheaper it is to finish the facade of a house, which takes into account all the most best characteristics material. In order to competently decorate your home, while saving a lot of money, you should decide on the main aspects of choosing the material. If you purchase a good and reliable finishing material, then this is already 50% success.
When choosing, you need to know that they mainly pay attention to aesthetic characteristics. There is no doubt that the “beauty” of such cladding is a very subjective question, because it depends on the individual preferences of each owner.
Nevertheless, there are parameters of facing materials that will not go unnoticed in any case. You can choose the most cheap material for the facade, you just need to take a closer look at criteria such as:
Another important criterion is the durability of the facade. When choosing inexpensive material you need to make sure it is durable so that it does not have to be replaced every year. Because cheap cladding of the facade of a house, initially low-cost, can result in annual renovations or repairs, which will hurt the budget of the thrifty owner.
How to get a brick cheaply? Buy good brick with minor defects. This can be done at the factory or you can buy leftovers from the dealer's warehouse.
By choosing this inexpensive facing material, you don’t have to worry that the facade of the house will fade. The only downside is that there is a chance of efflorescence.
Prices for the material are quite low, and the tile itself is a reliable material, so tiling the house ceramic bricks will fully justify the investment. Tiles are installed, as a rule, for a long time, but if there is necessary information Installation of facing bricks can be completed in the range of 5 to 8 weeks.
Facade primer is a material that has become very popular in finishing facades in shortest time. If the facade of the house is pre-plastered, then it is best to use a deep penetration primer for cladding private housing. For, which is impregnated with an antiseptic to avoid the appearance of harmful bugs.
As you know, the appearance of a house should create a feeling of comfort and coziness. Therefore, you should not save too much, as this may adversely affect the integrity of the house in the future.
Another economical option is thermal panels. A façade made of this material has many advantages, since dense polystyrene foam is used in its manufacture, which contributes to excellent thermal insulation. In the summer, the house will be cool, and in the winter, heat will not escape from the house.
Installation of thermal panels is carried out using ordinary self-tapping screws, so almost everyone can carry out the installation themselves in the shortest possible time.
Another worthy advantage is that the panels can be installed at any time of the year, since the material has increased strength.
Facing the façade with natural stone cannot be considered an economical option at all. However, where it is possible to get this facade material actually free of charge, this will be the cheapest way to finish the facade.
Where to get a natural stone almost free? Drive to the nearest quarry with your own trailer, or try to buy a stone with minor defects from a dealer.
You can also purchase leftover stone after facing big houses. If your house is small, then the remains from the cladding big house you have enough to do.
A house made with this particular material will look very beautiful. The stone will give it a very original and unique aesthetic look. The technology of facing a house with stone is very simple.
First you need to prepare the base. This stage includes leveling the surface of the base using ordinary plaster. Then you need to install extruded polystyrene foam on its surface. It is attached using self-tapping screws or dowels. Next, you need to apply an acrylic primer to the surface of the slabs. Are running out preparatory work the fact that a steel mesh is installed on the wall.
Then you need to decide on the mosaic that will be made of stone. You can draw a plan in advance so as not to make mistakes during the work process. You should try very hard, since the appearance of the facade depends on this. Next, you need to rub the seams and joints with mortar. After completing the work, experts advise applying a special varnish to the stone to make the color of the material brighter and more saturated.
Also, in this way you can protect the walls from wind, rain and frost. Facing the facade with natural stone will be the most reliable and, at the same time,...
Conclusion. The cheapest finishing of the facade of a house is possible if you have chosen the cheapest material for the facade or the material whose installation can save money.
Also, if you have the opportunity to get expensive cladding material very cheaply, it will give you the opportunity to make an expensive house façade for cheap.
See if you have the opportunity to remove substandard natural stone or decorative brick with defects. For these materials, small defects are not critical, but such a facade will be installed for centuries and will look very impressive.
