Frames plastic windows protect special film to protect them from dirt, scratches and other damage during transportation and installation. It is very easy to remove film from plastic windows if you do it in a timely manner, that is, immediately after the windows have been installed. If for some reason you delay with this, then removing the film may become big problem. According to the instructions, the film must be removed within ten days after installing the plastic windows. If you increase this period to a month or two, then most likely nothing terrible will happen. If the film remains on the frames for three or more months, it will require a lot of effort to remove it.
Factors that increase the adhesion of the film to the frame:
Owners of plastic windows are often faced with the question of how to wash the protective film. Of course, it is much easier to remove it immediately after installing the window, but often the owners do not peel it off immediately or completely forget about it.
However, the time comes when the protective material will have to be removed. Then the question arises: how to remove dried film from plastic windows?
Naturally, it is important not to damage the window during this process, and you also want to complete everything as quickly as possible and without extra effort. What can be done in this case? Effective ways exist, which means they can be safely used.
But in order to successfully remove the protective film, you must first understand the essence of the problem in more detail. Then it will be much easier to solve it.
Why do we need film on metal-plastic profiles? Companies, by gluing it, ensure the integrity of the product during transportation and installation. On the one hand, it is good that such protection is glued to plastic windows. However, how ordinary people then get rid of it? When the product is already in place and the protective layer is no longer needed.
Very often, windows are changed during complete renovation apartments or houses. This means that after installation PVC window profiles, a thin film coating remains for some time until the repair is completed completely, and dries.
After a few weeks, the film adheres more strongly to the plastic and practically merges with it. Dealing with dried out protective material is no longer easy.
Why security tape sticks more over time:
These are the main reasons why the protective film layer can be difficult to remove even a month after installation. The whole essence is hidden in the adhesive composition. This is what we need to fight against.
How to remove protective film from plastic windows correctly? There are several ways. Choose individually the one that is most suitable for you.
There are only two such methods. These are the most effective and proven methods.
Let's take a closer look at them:
All other methods are based on chemical exposure. But there is also a heating method, which is also considered good and simple. However, it also has its own nuances.
How to remove film from plastic windows? If you have a hair dryer at home, you can use it to quickly remove old protective film from metal-plastic window. You can also try using a household steam generator. The main idea is to melt the adhesive layer between the film and the surface of the window, due to which the tape will come off more freely.
The following points need to be taken into account:
If you follow all the recommendations and carry out the procedure correctly, then tearing off the sticky protective paper will not be difficult. It will be enough to simply pry the edge of the tape with a knife or scraper, and then remove the coating in a continuous piece without interruption.
You can also remove film from plastic windows using chemicals. These removal methods are based protective coating with profiles, lie chemicals. They are able to dissolve sticky material, which will then come off easily, and then you can simply wash it.
So, you can use the following cleaning products:
All these products will come to the rescue in peeling off old stickers, tape and washing off adhesive stains from PVC windows, and will also help remove old paint. They are perfectly capable of scrubbing off protective tapes on profiles without damaging the plastic surface at all.
If after removing the film there are still traces of glue, they should be completely wiped off so that dust does not stick. You can use white spirit or acetone to remove them. And also try to remove stains with a stationery eraser.
Another fairly common question that concerns not only plastic, but also wooden products, this is how to remove solar control film from a window? Is it even possible to tear it off? Yes, of course this is real. However, any kind of strong solvents are inappropriate to remove the film. How to clean the glass in this case? An ordinary knife and soap solution will be enough, or you can use Schumanite.
It’s worth saying right away that removing sun protection will not be so easy. But if you put in some time and effort, everything will work out.
How to remove film from glass? It is advisable to slightly warm the surface of the glass with a hairdryer before starting work. Next, thoroughly wipe the window with soapy water and begin removing the coating. The glue will gradually dissolve, and when tearing off the protective canvas, you will have to carefully pry it off with a scraper.
Finally from sun protection film glass unit and frames are washed store product for washing glass. If scratches are found on the plastic after the work has been done, then Cosmofen will come to the rescue. However, before using it, you should carefully study the instructions.
Here are some simple ways to clean the film on your windows. The main thing is to do everything slowly and carefully. Then the result will be excellent, and there will definitely be no traces or defects left.
Many users, faced with the problem of window film firmly “fused” to the PVC profile, rush to experiment, which does not always end well. Especially in the case of colored windows, there is a risk of destroying them. The OKNA MEDIA portal will tell you how to effectively and without disastrous consequences remove old protective film from plastic windows.
All plastic windows come to the market with frames protected by the manufacturer using self-adhesive film. According to the rules, the protective film must be removed as soon as possible after completing the window installation - especially when the PVC window is exposed to direct sunlight.
Unfortunately, this happens quite often, and due to the negligence of installers or the user himself, the protective film on the PVC profile can remain even for several years. In this case, when the hands get around to putting the new plastic windows in order, the user will be in for an unpleasant surprise - it is almost impossible to remove the protective coating.
It is difficult to remove old window film from a plastic window profile because it consists of two layers. The outer layer (transparent film) begins to peel off under the influence of ultraviolet rays and is relatively easy to clean. But at the bottom there is a second layer of white plastic with markings applied - it is this that sticks so strongly to the substrate.
The presence of old film looks especially bad in the case of a tree-like profile, because usually a protective coating is used white. Under the influence of UV rays, the film undergoes vulcanization and adheres very firmly to the surface of the PVC window. At the same time, it becomes less durable and breaks easily.
|
|
Some people try to wash off the protective layer with gasoline, acetone or other solvents - this helps a little, but at the same time you can remove the wood texture that is used to laminate the frame (white PVC windows, of course, are insured against this). Experts do not recommend exposing the surface of colored PVC profile too strong mechanical impact(scraping or sanding) because it is very easy to damage the lamination layer.
Fortunately, there are several ways to get rid of the protective film, we suggest you consider one of them. This method is simple, effective and, most importantly, will not destroy the plastic window. However, the procedure will take quite a long time and will require the use of a device with a steam cleaning function.
Such a device can be bought without problems; they are often sold in supermarkets. Please note that the package includes a special hose that allows you to fix the nozzle. Versions of this device often appear on sale, in which steam exits directly from the tank through a nozzle. In this case, you will have to constantly hold the heater in your hands during cleaning, but it will soon become clear that heating the film in the lower part of the frame is impossible in this case (the window sill gets in the way).
Work begins by filling the purifier with water and connecting to the power supply. After a few minutes you can start heating small area protective film with a jet of steam (hold the nozzle directly above the film or even touch it). Heat a small section of 1-2 cm across the entire width. If window film It's already too old and won't peel off, you'll have to reheat it (after cooling). At this time, you can heat the protective coating of the window from the other end.
To remove the protective film using steam, shortly after heating a small area, you should try to separate the film from the substrate with your fingernail. This must be done carefully and slowly, across the entire width of the tape. This is the most important point. It is necessary to ensure that a small piece of the film peels off across its entire width. Then you can grab the end and slowly (!) tear off the film while simultaneously heating with steam from above and below (at the points of contact with the substrate).
If the protective film begins to tear and its fragment does not come off, you need to use a fingernail in this place and lead to a situation where it peels off again across its entire width. After removing a sufficiently long fragment, cut it off with scissors, leaving 2-3 cm so that there is something to cling to to continue further cleaning of the PVC profile.
After removing the protective layer, it remains on the surface of the window frame. white coating, which is quite difficult to wash off. And here there is a proven method - you can use a glass cleaner for this purpose (for example, Mister Muscle).
When buying new plastic windows, do not ignore the advice of the window company, which is clearly stated in the operating instructions, when it is worth removing the protective film from the PVC profile. This will allow you to save time and money, and save your nerves. In general, following the manufacturer’s recommendations not only in this point, but also in all others, is the key to the impeccable appearance and durability of your plastic windows.
How to remove film from plastic windows - a problem that arises when moving to new apartment, and during the renovation of an already inhabited living space. Often the owners come to their senses after completing the transformation - in this case the window has to be cleaned of pieces stuck to window frame. Having managed to remove them, the apartment owners are forced to struggle with sticky glue.
Some people resort to various detergents, one way or another, but in any case it is very difficult to cope with the problem.
It is worth noting, first of all, that the most reliable approach to ensuring a clean window is to remove the film immediately after installation plastic construction. If you lose time, you will have to deal with a thoroughly dried coating, which is quite difficult to remove.
Readers are given the opportunity to familiarize themselves with several methods for removing film. However, to get a truly clean window, you need to be prepared to remove the adhesive.
So, to clean the window from film and glue, you need to use one of two main ways to solve this problem. As alternative option– for greater efficiency, they often resort to a combination of these technologies.
The main methods allowing are presented the following options:
The mechanical option, in turn, implies several of the most effective varieties.
You can clean windows from old film using a special scraper, which is traditionally used when processing hobs or their glass-ceramic analogues.
Remove any remaining adhesive and discard minor scratches possible by resorting to cleaners such as FENOSOL and COSMOFEN 10. If these products are not available, it is recommended to use some acrylic solvent. As practice shows, it is convenient to finally clean windows from old solar control film using P-12.
The next method, which allows you to remove the protective coating and all its traces, is based on the use of industrial. In the absence of one, a powerful home hair dryer is acceptable. The effectiveness of the technology is based on heating, which greatly facilitates film removal.
When the film coating is heated, it must be pryed off with a sharp stationery knife. The technique allows you to easily and quickly remove the film. To deal with glue residue, you need to use the first method.
Many users successfully achieve their desired goal using a steam generator. An unusual, but, according to reviews, quite effective method of erasing the film with a stationery eraser. To combat residual marks, you can choose white spirit or one of the mentioned cleaners.
In the pursuit of purity, diligence often turns sideways - new and not always solvable problems. Particular care must be taken when manipulating the scraper.
The fact is that even the safest scraper can leave quite noticeable scratches on the surface of the PVC profile. To avoid such an unpleasant side effect, it is best to remove the peeled film with your fingers.
Methods are no less in demand chemical cleaning. As a container used to solve the problem, you can use a regular water spray. Denatured alcohol is poured into it.
Then the product is applied to the surface, and after a few minutes you can begin to remove the protective coating. To simplify the work, you can pry it off with a stationery knife.
When solving the problem of how to remove film from plastic windows, you should pay attention to the “Shumanit” detergent (manufactured by the Buggy company, Israel).
The glass unit can be easily cleaned with a paint remover: RP 6. It is applied liberally to the surface to be treated. After ten minutes, the protective tape begins to swell literally before our eyes.
Before you begin the actual cleansing, be sure to wear gloves and goggles. When washing off glue and alkali residues, use soapy water.
Do not fight with the protective tape by using solvent. As a result of the efforts, the film will remain in its place, and side effect the profile will become hopelessly damaged.
Having completed the main part of the task - choosing how to remove the old solar control film and using the most attractive method for yourself - you need to finish the job by washing the windows, which will require some time and attention.
It is best to resort to one of the following two proven methods - to wash with:
You can resort to it only if the surface is not very dirty.
The “working tools” in this situation will be:
A little warm water is collected in the container. The rag is wetted and wrung out well. Dirt is wiped off the window. The spray is distributed over the surface in a zigzag pattern.
Use a dry piece of cloth to remove dirt. To consolidate the results, wipe the surface with newspaper or paper napkin.
As a rule, this technology is used when access to the window is difficult. A tie with a handle 25 to 30 centimeters long will help solve the problem. An additional advantage of the method: the absence of streaks and stains upon completion of the work.
You should stock up on:
Proportions for preparing the cleaning solution: a couple of drops of the product per 2 liters of water. IN ready solution The sponge is dipped and then squeezed out.
Washing is done in a circular motion. The largest accumulations of dirt are characteristic of the edges and corners, which must be taken into account when working.
Next, the container is filled with clean warm water, into which the screed is dipped and passed over the entire surface. Finally with a dry cloth horizontal movements From left to right everything is wiped clean. Water accumulated at the bottom of the window must be properly removed.
For hard-to-reach segments, it is convenient to use pieces of cloth or paper towels.
Each of the listed options for solving the problem has been tested many times in practice. On the Internet you can find confirming reviews for any of the versions.
HidePlastic windows are often equipped with various films, which are needed for protection from the sun, giving the glass greater strength, and decoration. When purchasing an apartment, the windows can be covered with such films, but the new owner does not always need them. In addition, if the time has come to update the windows, since films tend to become unusable, the question arises of how to remove the solar control film from the window.
You can remove the sun protection film from the glass different ways, choosing the most convenient and affordable. This is done both mechanically and with the help of various detergents; they also use a combined approach in order to clean efficiently.
The film can be quite useful: it has a small thickness, but at the same time it makes the window much stronger; it can no longer be broken with a simple stone. Exist different types films that help protect the glass unit even from strong impacts, such as a shot; They are classified as protective. It will not be possible to remove perforated film from glass or any other type of protective or tinting from the outside: an attacker will not do this, since the process requires a lot of time, effort, and attracts the attention of others. Most films are applied with inside, with the exception of protective.
Knowing how to remove film from window glass may be necessary if you want to replace it when updating the interior or replacing a double-glazed window. Sometimes the product loses visual appeal and requires updating or the owners of the room want to change its lighting, make the room lighter or darker. The process of removing film is simple and does not require hiring a specialist, but it is worth considering that you will have to spend a sufficient amount of time and effort on this. You need to work carefully: in the process it is easy to damage the glass or cause scratches on it, especially if you remove the film using hard materials like a spatula or a rough brush.
When choosing a method, means, or option for cleaning glass, room owners take into account several parameters:
The easiest way to remove the sun-protective film from glass is to use a spatula and your fingers. Some types can be carefully pryed off by grabbing the edge and tearing it off, but this does not always happen due to the fact that the film is glued unevenly, is damaged in places and peels off.
It is quite difficult to remove film adhesive from glass. It is difficult to remove with detergents and is not susceptible to mechanical action. In order to remove it, you can use white spirit or another alcohol-containing substance that can gently clean the surface. You should not use rags with coarse pile, as this may leave marks on the glass that are visible in the sun.
Understand , how to delete old film from plastic windows, it may be necessary if it is damaged, there is a desire to change the appearance of the window, or to renew the old coating, which has already deteriorated.
Removal methods can be divided into two – mechanical and chemical. The first allows you to remove film from plastic windows without spending much money, but with the risk of scratching the glass. The second will take longer and cost more, but with the right products you can thoroughly clean the surface without causing harm to it. For greater effectiveness, it is best to combine the methods: first, you will need to tear off all swollen, cracked or otherwise deteriorated film.
You can remove the film from plastic windows by hand, then get rid of the glue using substances such as COSMOFEN 10, FENOSOL. These detergents have a cheaper alternative that you can buy at a hardware store: it's called P-12.
It will be much easier to remove the protective film from plastic windows if, before tearing it off, you warm it up with construction hair dryer. Heated glue becomes more viscous and allows parts of the structure to be peeled off. However, it is better to remove the glue itself when it has cooled a little.
You should try to heat the surface evenly: the better you do this, the easier it will be to remove the self-adhesive film from the glass and the remnants of its glue. The latter will not be easy to remove; you will need to use a solvent, a scraper and detergents. You need to act carefully, otherwise you may scratch the glass. A steam generator can help in this matter. With it you can remove stained glass film from glass ,
get rid of tinting or protective film, glue residues. If you don’t have a steam generator or a powerful hair dryer at hand, you shouldn’t try to heat it up with an iron. This way, the film will not be removed, but it will partially stick to the surface of the iron, which can significantly damage it, and after cooling it will not be easy to tear it off from the iron.
You can remove the self-adhesive film from the glass, if it is warmed up well, using a hard eraser for artists. Eraser residue can be easily removed from the window. To do this you need a dry sponge or rag. If there is any glue left, you can reapply the eraser or use a solvent. Most hardware stores will have something to remove film from glass.
Before removing film from glass, you need to carefully study all the methods, purchase suitable detergents and tools with which you can clean the surface.
